Ammann avp 3520 for sale
Identified location: Ashburn (US) (Edit)
|
4
2007 Ammann AV26-2 Double Drum Vibrating Roller c/w Roll Bar - choice.
Bhssc2yr3
This machine will be sold by Euro Auctions at an unreserved auction in Leeds, UK on 27th – 29th November. For more information go online. more
|
|
5
Remscheid, Germany
dealership location
6411 km
new
Bihl + Wiedemann BW2237 AS-i 3.0 PROFINET Gateway ID.-No. 13520, unused in original packaging, 100% functional
Bswr7knu more
|
|
6
Waregem, Belgium
dealership location
6181 km
2012
used
Field of application: Construction
Muj9i0 more
|
|
2
Tauberbischofsheim, Germany
6644 km
excellent (used)
Pneumatic cylinder BOSCH Type 0 882 352 004,
Nofm2
Piston diameter: 50 mm,
Stroke: 100 mm. more
|
|
9
Durma Hydraulic press brake model HAP 35200 3550mm x 200tns, course 150mm, working speed 7mm / s, recoil speed 77mm / s, distance between uprights 3100mm, gooseneck or neckline 260mm, engine power 20cv, with Elgo positioner machine in good condition and with regulations, estimated weight 13500kg
All information without guarantee. A demonstration is possible at any time in our showroom. The ad was translated automatically and it is possible that some translation errors have occurred.
Dhkwcydx more
|
|
4
The thermostat plus enables effective temperature control of liquids between -5°C (max. 30°C below room temperature) and +99°C.
You can place different exchangeable blocks on the thermoblock to temper different vessels or plates.
In addition to simple, time-unlimited temperature control, ads units can also be programmed. A sequence of up to four phases, which can be freely set in temperature and duration, can be carried out.
These phases run automatically one after the other.
The temperature cha... more
|
|
4
2007 Hamm 3520P Single Drum Vibrating Padfoot Roller
Bfuhbsp30f
This machine will be sold by Euro Auctions at an unreserved auction in Zaragoza, ES on 26th November 2019 at 9am. To view full inventory or for more information please visit our website. more
|
|
6
Werner Kammann heavy duty label die cutting embosing with 2 laminators
Manufacturer: Werner Kammann
Type: die cutter
Age: 1996
Working width: 360 mm
Die cutting width max 355 mm
1. Unwinder
2. Laminator
3. Slitter
4. Feeder Sectin for Die Cutter
5. Die Cutting and Embosing
6. Delivery of Die Cutting
7. Matrix Rewinder
8. Laminator
9. Slitter and Perforator
10. Sheeter (For roll to Sheet production)
11. Delivery for Sheeter
Banomjmhxj
12. Rewinder
Machine is in a very good condition and c... more
|
|
3
Magdeburg, Germany
6645 km
2011
ready for operation (used)
Stamper Ammann ACR 60, built 2011, petrol, weight 62 Kg, Ser.Nr.10778924
Ebfjc2b more
|
|
6
Technical data:
-Working width 3500 mm
-Pressure capacity 200 t
-Clearance between the stands 3100 mm
-Table width 405 mm
-Throat depth 260 mm
-Height approx. 240 mm
-Stroke 190 mm
-Working height approx. 865 mm
-Motor power approx. 15 kW
-Oil approx. 300 l
Gb9wjqf2s
-Space requirement approx. B H 3850 x 2850 X 1900 mm
-Weight approx. 13500 kg
-with: - swivel arm - control panel with digital display
-MOT. Back gauge up to 620 mm
-You. Crowning ... more
|
|
|
|
5
Lossatal OT Hohburg, Germany
dealership location
6751 km
1992
used
Width 70 cm / Hatz diesel engine / reversible / with vibration / 2 water tanks / little / 700 kg
Kroe9 more
|
|
2
Großrückerswalde, Germany
dealership location
6811 km
used
lower drilling gear cover tech 95 L, 10 spindles
used, built from functioning machine.
Natrn
the used bearings are still installed more
|
|
8
The purpose of this equipment is to perform precise, parallel imprinting on any object with circular, conic or oval cross-section. This equipment is a carousel with 9 functional stations that allow simultaneous processing of up to 7 objects at subsequent working stations - including positioning, surface pre-treatment, printing (two stations), UV curing (two stations), hot stamping.
TECHNICAL PERFORMANCE
The purpose of this equipment is to perform precise, parallel imprinting on any object with... more
|
|
8
Magdeburg, Germany
6645 km
1993
ready for operation (used)
Trench roller Ammann Rammax RW 2900, built in 1993, 1267 hours of operation, diesel, 24.6 Kw engine, weight 3000 kg, Ser.Nr.1215941
Hnohdmqx more
|
|
6
Pleven, Bulgaria
dealership location
7974 km
2019
new
Medium-size plastic granulator with blower and cyclone:
-the electrical equipment is completed with TELEMECHANIQUE elements;
-the heavy roller bearings
-the cutting knives are made of D2-AISI ( 1.2379 DIN )
-soundproofed feed hopper
-chevron rotor with guillotine cuting geometry
OUTPUT kg/h- 150-300
ROTOR DIAMETER mm- 350
ROTOR LENGTH mm- 400
Pflaqs9jo
ROTOR KNIVES no/mm- 6x200
STATOR KNIVES no/mm-4x200
DRIVE POWER kW- 11.0
VENTILATOR kW- 4.0
CYCLONE WITH STATION FOR BIG-BAG FILLING
... more
|
|
2
Großrückerswalde, Germany
dealership location
6811 km
used
Basic body gearbox tech 95 L, 10 spindles
Bbgxharerj
used, built from functioning machine.
the used bearings are still installed more
|
|
4
Bauernwerder 1, 39126 Magdeburg, DE
6645 km
2008
ready for operation (used)
Vibrating plate Ammann AVH 6020, year of manufacture 2008, diesel 10,1 kw, without crank Ser.Nr. 154199, 510 kg
Czrjyid8 more
|
|
5
Rotor diameter [mm]: 350 rotor width [mm]: 500 number of rotor knives [PCs.]: 6 x 250 mm number of stator [PCs.]: 4 x 250 mm power [kW]: 15 holes of sieves [mm] type 8, Lase [kW]: 4.0 cyclone diameter [mm]: 480 weight [kg]: 1180 dimensions Lxwxh [mm]: 1200 x 1000 x 2020 throughput * [kg/h]: 300
Vapbo more
|
|
5
internal diameter:50 mm
grinding depth:30 mm
swing diameter:250 mm
workpiece weight max.:60 kg
max. feed:15 m/min
Min. automatically programable travel:0,0001 mm
max. travel:400 mm
resolution:0,0001 mm
max. feed:15 (diameter related) m/min
Min. automatically programable travel:0,0001 mm
max. travel :200 mm
resolution :0,0001 mm
max. feed:15m/min. m/min
min. automatically programable travel:0,0001 mm
max. travel:200 mm
resolution:0,0001 mm
max. feed:15 (diameter related) m/min
max. travel :300 ... more
|
|
4
Pressure:2000 t
distance between columns:4550 mm
slide stroke:1600 mm
Distance table/ram, max. stroke up, adjustment up:2800 mm
Table surface area:4500 x 2300 mm
ram pressure:1300 t
Dvrgsggcq
Pressure of blank holder:700 t
stroke of blankholder at adjustment down:1100 mm
blank holder surface:4500 x 2300 mm
pressure of drawing cushion in table:450 t
Die cushion stroke in table:225 / 350 mm
Ram surface:3520 x 1650 mm
Side window:2350 mm
Height above floor:9,1 m
Dimensions (WxDxH):6,5 x 4,8 x 11,5... more
|
|
4
CNC universal console milling machine make CSEPEL type MU 5Masch. # 62087 Year of construction 1985Technical data:Table clamping surface1600 x 500 mmTraverse X-axis1200 mm Y-axis650 mm Z-axis500 mm16 Spindle speeds45 - 1400 rpm.Spindle mounting ISO 50 Feed longitudinal and transverse20 - 1000 mm/min vertical10 - 500 mm/min Rapid feed longitudinal and transverse4500 mm/min vertical1500 mm/minDrive power milling head11 kWDimensions L x W x H4185 x 3520 x 2750 mmmwith line control HEIDENHAIN TNC 13... more
|
|
4
Mercedes oil pan underfloor suitable for engine type: OM352 part number: A3520141702Condition for the purchase is a business-commercial activity of the buyer and their corresponding proof. After completion of the purchase process, please send us proof of your business activity (e.g. VAT identification number, trade licence or association or chamber identity card). Sale and delivery are made exclusively on the basis of our General Terms and Conditions:www.autogilles.de/agbMarke:: Mercedes-Benz mo... more
|
|
5
Barntrup, Germany
dealership location
6496 km
2004
used
CNC processing centre, 4 axesBrand: SCMType: Ergon TOP/TVNYear: 2004Technical data: Working area: X 3520mm x Y 1575mm x Z 1575mm Stepless feed: max. 130 m/min. 2 pieces milling spindles 15 kW main motor Rotation speed max. 24000 rpm 72 pieces tool changing places 4-fields 2 tables Positioning assistance Vacuum cup positioning automatic Chip transport belt 500 m³/H Vacuum Need of space: 7500x8600x2950mm Note: The specifications and descriptions are a copy of the order confirmation at that ti... more
|
|
4
sheet width:3200 mm
plate thickness:6 mm
distance between columns:3050 mm
back stop - range:20-600 mm
cutting length:3200 mm
cutting angle:1,5 °
M2twn
stroke/min:16
table height:800 mm
table width:460 mm
table length:3520 mm
weight of the machine ca.:6600 kg
quantity of oil:150 l
total power requirement:7,5 kW
dimensions of the machine ca.:3950 x 2200 x 1920 mmm
:13 more
|
|
5
Wiefelstede, Germany
dealership location
6377 km
used
Roller conveyor, conveyor, roller conveyor, roller conveyor
Roller width 600 mm
Conveyor length 3400 mm
Diameter role 84 mm
-Achsabstand 270 mm adjustable
Height 815 mm adjustable
-angetrieben gear
Gear motor 0.55 of kW speed 17 m / min
Foot switch right/left rotation
-1 x roller conveyors available
Award pieces
Unidcmb8q
3520/710/H900 dimensions mm
Weight 260 kg more
|
|
10
Hamburg, Germany
dealership location
6484 km
2009
used
Vehicle data - Make: Kalmar - Type: DCE120-6 - Drive type: Diesel - Load capacity: 12000kg - Load centre: 600 - Lifting height: 4100 mm - Range: 0 mm - Year of construction: 2009 - Operating hours: 7493 - Internal No.3172b _____ Mast data - Mast type: Standard - Lifting height: 4100 mm - Height: 3520 mm - Free lift: 0 mm - Fork carriage: 2450 mm - Forks: 2400 x 250 x 70 mm _____ Dimensions - Length: 4600 mm - Width: 2500 mm - Height: 3520 mm - Own weight: 15440 kg _____ Battery
Bftz7ce0sc more
|
|
7
Oldenburg, Germany
dealership location
6390 km
2002
used
Vehicle data - Make: CVS Ferrari - Type: FL2812 - Drive type: Diesel - Load capacity: 28000kg - Load centre: 1200 - Lifting height: 4000 mm - Range: 0 mm - Year of construction: 2002 - Hours of operation: 8000 - Internal no.D3780 _____ Mast data - Mast type: Standard - Lifting height: 4000 mm - Height: 3850 mm - Free lift: 0 mm - Fork carriage: 0 mm - Forks: 2400 x 0 x 0 mm _____ Dimensions - Length: 5000 mm - Width: 3520 mm - Height: 3850 mm - Own weight: 39700 kg _____ Battery
Bbdjpbks more
|
|
10
The scope of delivery of the load cell includes: 1 x load cell No. WZA8202-NC Serial number 35201111 1 x electronics box No. WZA8202-NC serial number 35201111 1 x spacer 1 x load carrier 1 x power supply unit with power cable 1 x installation instructions 1 x test reportArticle condition: New from stockUse marks: NoneScope of supply: With installation instructions, test report and accessoriesHousing: Very good, no scratchesPackaging: Original packagingGuarantee in months: 12Voltage: 230 VACWeigh... more
|
|
6
Hessisch Lichtenau, Germany
dealership location
6567 km
1975
used
Circle cutter with manual drive FASTI type 501 size 2
Masch. No. 6352034 built in circa 1975
Thickness of 2 mm
Maximum Ronde diameter 1000 mm (Qudratzuschnitt)
Maximum Ronde diameter 1300 mm (Octagon cut)
Minimum Ronde diameter 100 mm
Projection of the Terminal tip 720 mm
Projection of the cutting wheel 280 mm
-Drive of the cutting wheels with hand crank
-Terminal head with thread
-on table pedestal (900 x 1200 mm)
2rbsnu
Dimensions L x W x H 1500 x 900 x 1150 mm
Weight 400 kg
good condition more
|
|
2
Herborn, Germany
dealership location
6504 km
2012
used
Vehicle data - Make: Atlet - Type: UMS 160 - Drive type: Electric - Load capacity: 1600kg - Load centre: 600 - Lifting height: 5700 mm - Range: 0 mm - Year of construction: 2012 - Hours of operation: 13520 - Internal no.0T2 _____ Mast data - Mast type: Triplex - Lifting height: 5700 mm - Height: 2440 mm - Free lift: 0 mm - Fork carriage: 0 mm - Forks: 1150 x 100 x 40 mm _____ Dimensions - Length: 2400 mm - Width: 1270 mm - Height: 2440 mm - Own weight: 3300 kg _____ Battery
Iwfsebf more
|
|
6
Meschede, Germany
dealership location
6467 km
2011
used
Truck specification - Make: Jungheinrich - Type: DFG435 - Drive type: Diesel - Load capacity: 3500kg - Load centre: 500 - Lifting height: 3800 mm - Range: 0 mm - Year of construction: 2011 - Hours of operation: 3520 - Internal no.222374 _____ Mast data - Mast type: Standard - Lifting height: 3800 mm - Height: 0 mm - Free lift: 150 mm - Fork carriage: 0 mm - Forks: 0 x 0 x 0 mm _____ Dimensions - Length: 0 mm - Width: 0 mm - Height: 0 mm - Weight: 0 kg _____ Battery
Be72hqlaij more
|
|
9
Properties:
Nlxop
Used conveyor 180 degrees left with 500 mm pitch curve
* Condition: fully functional with traces of use
* Ideal for the fast material handling
* Expertly disassembled and packed
* Feet to be ordered separately
* Color: Silver
Technical data:
Mass of the belt conveyor curve by 180 ° left with 500 mm pitch
Overall length: 3520 mm
Total width approx.: 1060 mm overall width incl. motor: 1370 mm curve angle: approx. 180 degrees degrees with 500 mm pitch
Belt width: 900 mm
Materia... more
|
|
8
Weingarten (Baden), Germany
6595 km
2004
excellent (used)
Hydraulische Profilstahlschere IMS HY 45 – 17-02-009
Lieferzeit: sofort
Preis: 5.000,00 € zzgl. MwSt.
Nummer: 17-02-009
Hersteller: IMS
Typ: HY 45
Maschinendaten
Baujahr: ca. 2004
L x B x H: ca. 1200 x 800 x 1700 mm
Gewicht: ca. 1200 kg
Sehr Guter Allgemeinzustand
Werkstattgeprüft:
Komplette Durchsicht der Maschine. Probelauf durchgeführt.
Maschine steht an unserem Lager und kann jederzeit unter Strom vorgeführt werden.
Technische Daten
Steuerung: konventionell
Geeignet zum:
... more
|
|
6
Dortmund, Germany
dealership location
6417 km
2013
used
[...]: 6389\\\\\**Equipment details:**Loading capacity : 2000 kgLifting height : 210 mmMast type : Standard mast height : 940 mmLength/width/height : 3520 / 790 / 1210 mmOperating weight : 926 kg\\**Other equipment information:**\\We will be happy to provide you with the right transport solution.250 - 300 more forklifts, attachments and sweepers available for you immediately. Of course also for rent! We are happy to buy your ALTEN. *** Special offer hand pallet truck PRAMAC GS PRO 25 from europe... more
|
|
1
bore capacity in steel (diameter) 80 mm
arm length 500 - 2500 mm
workpiece height max. 2000 mm
spindle taper MT 6
spindle turning speed range 16 - 1250 U/min
threading: M 65 mm
quill stroke 450 mm
feed range - spindle 0,04 - 3,2 mm/U
slide adjustment -horizontal 2000 mm
table-size 1000 x 800 x 560 mm
column diameter 550 mm
base plate 3520 x 1400 x 320 mm
no. of turning speeds 16
total power requirement 7,4 kW
weight of the machine ca. 12500 kg
dimensions of the machine ca. 4000 x 1600 x 3850 m... more
|
|
2
Vehicle data - Make: Manitou - Type: MT1436R - Drive type: Diesel - Load capacity: 3600kg - Load centre: - Lifting height: 13520 mm - Range: 0 mm - Year of construction: 2008 - Operating hours: 1785 - Internal no.351841 _____ Mast data - Mast type: Telescopic - Lifting height: 13520 mm - Height: 1446 mm - Free lift: 0 mm - Fork carriage: 0 mm - Forks: 1200 x 0 x 0 mm _____ Dimensions - Length: 0 mm - Width: 0 mm - Height: 1446 mm - Weight: 0 kg _____ Battery
Imxsi80x more
|
|
6
machine veneer saw
manufacturer Mayer
type FS 3
part Id-no. 2233833
cutting height 45 mm
cutting length 3520 mm
saw blade diameter max. 180 mm
motor capacity 2,2 kW
feed manually
connection 380/50 Volt / Hz
machine dimension 1
length 4200 mm
B8t9m7uu
width 1100 mm
height 1300 mm
weight 750 kg
site Rietberg more
|
|
15
3 Gildemeisters AS32-6 in good state for sale
Including different separate spare parts, among which a new tapping device, a new bronze crown wheel for the main drive, a cross drill device, several gripping spindles for processing the rear of product and several other spare parts
D8f9egp more
|
|
14
Jelenia Góra, Poland
6957 km
2007
good (used)
Universal milling machine HECKERT UNITECH FW 400 built in 2007 in Germany. The milling machine has a strong milling spindle. The machine has automatic tool attachment.
Characteristic data:
L0ltstfs
- PLC controller: SIEMENS SIMATIC S7-300
- display with 3 axes readings: ACU-RITE
- tool attachment: mechanical-electrical gearing
- machine dimensions (length x width x height): 3500 x 3520 x 2160 mm
- machine weight: 4990 kg
Worktable :
- dimensions: 400 x 1600 mm
- maximum table load: 1500 kg
- ... more
|
|
6
Dortmund, Germany
dealership location
6417 km
2013
used
[...]: 6388\\\\**Equipment details:**Loading capacity : 2000 kgLifting height : 210 mmType of mast : Standard mast height : 940 mmLength/width/height : 3520 / 790 / 1210 mmOperating weight : 926 kg\\**Other equipment information:**\\We are happy to offer you the suitable transport solution.250 - 300 forklifts, attachments and sweepers are available for you immediately. Of course also for rent! We are happy to buy your ALTEN. *** Special offer hand pallet truck PRAMAC GS PRO 25 from european prod... more
|
|
8
Bruchsal, Germany
6597 km
1972
excellent (used)
Zugfestigkeits- und Druckversuchsmaschine / Universalprüfmaschine Wolpert U 10
Lieferzeit: sofort
Hersteller: Wolpert
Typ: U 10
MASCHINENDATEN
Baujahr: ca. 1972
L x B x H: ca. 2000 x 600 x 2900 mm
Gewicht: ca. 1500 kg
Sehr Guter Allgemeinzustand aus staatlicher Behörde
Hyl7d9z
TECHNISCHE DATEN
Steuerung: konventionell
Prüfbereich: ca. 1.000 – 10.000 kN
Kolbenhub: ca. 250 mm
Abstand zwischen den Spannköpfen: max. 400 mm
Lichte Weite zwischen den Säulen: ca. 340 mm
Geeignet für Proben: ... more
|
|
4
Description: Sedimenter with funnel bottom and jinters overflow and soothed inlet for separating the sludge from the clear water phase
Built: 2003
Documentation: no
Visit: yes
Warehouse: Lager Warburg
Status: used - good
Volume: 3.5 m3
Container bottom: conical
Material: PP
Diameter: 1200 mm
Height: 3520 mm
Height: 3530 mm (with transport tabs)
Other: Cone bottom
Nokcr
Connections: 1X DN80 / 2x DN50 / 1x DN40 more
|
|
6
Wiebusch 87, 59581 Warstein, DE
6470 km
ready for operation (used)
from a dismantling of the machine:
Nc7kv
Servo motor Lenze MCA 21X35-RS0B0-B38N-KK5F10N-R0SU 20, 3kW
3520 1/min
incl. blower R2E 175
Condition: used / ready to use
This offer is aimed exclusively at commercial people.
Prices are net.
We will gladly create an individual offer for you.
To do this, please send us your complete contact information.
Offer staying free, intermediate sale is reserved.
Internal No.: 1122 more
|
|
4
Vertical machining center serial. SIGMA type EK 150 P
Built in 1989 with table pallet changer
T9d8p8ir
Technical data:
Table cross travel x 1500 mm
Tischlängsverfahrweg Y 800 mm
Spindle vertical way Z 750 mm
Table size 1900 x 750 mm
maximum table load 3,5 t
Spindle carrier ISA 50
Spindle speeds 20-4000 RPM.
Max drilling capacity 60 mm
Thread cutting performance M 48
Milling capacity 450 cm³ / min.
Working feed 0-10000 mm / min.
Rapid feed 15000 mm / min.
Distance spindle axis / guides 890 mm
D... more
|
|
4
gebr. vert. Metal band saw
Make JAESPA
Model MSP 4
. No.: 735207
Rolled Ø 420 mm
Cutting height under the leadership of 325 mm
Throat depth 400 mm
Table dimensions 610 x 610 mm
Table swivel left/right 15 / 45 °
Blade length 3200/3400 mm
Saw band width 3-25 mm
Cutting speed adjustable 15-300 m / min
Motor 0.9/1.5 kW
External dimensions:
Width 800 mm
Depth 950 mm
Height 1850 mm
Xg8q0jagc
with
Band saw butt welding machine
with scissors and grinding motor
Make IDEAL BS 016 more
|
|
7
Weingarten (Baden), Germany
6595 km
1985
good (used)
Säulenbohrmaschine Gillardon GB 30 – 02-04-007
Lieferzeit: sofort
Preis: 2.990,00 € zzgl. MwSt.
Nummer: 02-04-007
Hersteller: Gillardon
Typ: GB 30
Maschinendaten
Baujahr: ca. 1985
L x B x H: ca. 600 x 60 x 1800 mm
Gewicht: ca. 300 kg
Guter Allgemeinzustand
Werkstattgeprüft:
Komplette Durchsicht der Maschine verschiedene Verschleißteile erneuert u.a. alle Antriebsriemen erneuert.
Probelauf durchgeführt. Maschine mit aktueller DGUV3 – Prüfung. Maschine steht an unserem Lager und kann j... more
|
|
5
Manufacturer: Christen & Laudon
Built: 2010
Documentation: no
Warehouse: Lager Warburg
Status: used - satisfactory
Volume: 10 m3
Container bottom: conical
Material: PP
Temperature: 60 °C (max.)
Height: 3520 mm (container)
Height: 3720 mm (total with agitator traverse)
Diameter: 2270 mm (container)
Fxnah3h
Diameter: 510 / 600 mm (manhole on top / side)
Connections: 7X DN80 / 2X DN100 / 1X DN200 / 2X female thread sideways
Further information: (agitator wing and shaft available (... more
|
|
|
