Used Asv 4810 for sale (165)

Condition: good (used), Trumpf HAAS Type: HAAS Laser HL556D Laser light wavelength: 1064nm Minimum power: 5 W Maximum power regulated: 550 W Beam parameter product: 25 mm-mrgd External dimensions: width 1250mm, height 1580, depth 720m Rjdpfx Aec Tk Iyjbtsch Power cable with plug: Length: 5.5 m Plug: CEE round plug, 5-pin 63A-6h Cooling water hoses: Connections for supply and return: 1 inch The hoses are plugged onto the connections and sealed with 2 hose clamps each. Electrical interfaces: Serial interfaces for service purposes Ethernet interface for operating PC Interface of the analog input card ASV interfaces for safety circuits Output for measured values of the laser power Interface for connecting the control panel Emergency stop interface Electrical connection values: Mains 20-01-37-00 400 V ± 10%, 3P + PE, 50 Hz 20-01-38-00400 V ± 10%, 3P + PE, 60 Hz Scope of delivery: (laser system, laser head and replacement cable ...) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 1,820 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 950 kg, input voltage: 400 V, input frequency: 50 Hz, load capacity: 100 kg, Equipment: documentation/manual, For sale: MAFAC Elba as a 2-bath cleaning system, year 2019, with approx. 2,500 cleaning cycles in very good condition. (Sale exclusively within Austria) Equipment: - Rotating warm air impulse blower - Stationary hot air drying system - Main stream fine filtration MT 1 - Main stream fine filtration MT 2 - Variable speed control of basket rotation - Control cabinet with top lighting - Leveling kit - Timer - Safety grid MW 20 Rjdpfxewyc Sij Abtoch - Chemical dosing proportional to fresh water (2 units) - Suitable for Euro-standard baskets: 600 L x 400 W x 288 H mm

Condition: good (used), MERKLE Insquare W 300 AC/DC lasapparaat met originele kabelset Primair: Spanning: 3 x 400 V Frequentie: 50 (60) Hz Cos phi: 0,95 TIG DC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire maximale stroom: 19 A TIG AC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire piekstroom: 19 A MMA-lassen: Stick-elektroden: 1,5-6 mm Open spanning: 80 V Werkspanning: 20-32,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 13,1 kVA Primaire continue stroom: 19 A Primaire piekstroom: 22 A Lasproces: 10-standenschakelaar: TIG DC Min, TIG DC Plus, TIG DC Min met startpuls, TIG AC Geluidsarm, TIG AC Blokgolf TIG AC "Gebalanceerde TIG", Elektrode Min Elektrode Plus Elektrode "Sinusgolf" Elektrode Blokgolf Keuzeschakelaar 1: 10-standenschakelaar: Stroom 1, Tijd 1, Stijg- en daaltijd, Startstroom, Eindstroom, Ontstekingspuls, Punttijd, Gasvoor- en nastroomtijd Keuzeschakelaar 2: 9-standenschakelaar: Stroom 2, Tijd 2 (voor pulsmodus), AC Balans, AC Frequentie, Hotstarttijd en -stroom, Stroominstelling, Elektrode d, Display U Instellingen: 2 draaiknoppen voor keuzeschakelaars 1 en 2 Displays: 2 LED-displays met voorloop- en hold-functie voor stroom, spanning, tijd Tijdfuncties: 4-standenschakelaar: UIT, langzame puls, snelle puls, puntlassen Ontsteking: 4-standenschakelaar: UIT, hoogfrequent, Lift-Tig Energieregeling: 4-standenschakelaar: op het systeem, hand- of voetafstandsbediening, lastoorts Bedrijfsmodus: 4-standenschakelaar: 2-takt, 4-takt, 4-takt met 2 stromen, gastest, test, programma Programmageheugen: 20 vrij toewijsbare geheugenplaatsen AC-frequentie: 50-200 Hz AC-balans: 9-91% Gasvoorstroomtijd: 0-3 s Gasnastroomtijd: 0-25 s Stroomstijgingstijd: 0-2 s Stroomdalingstijd: 0-20 s Ontstekingspuls: 0-100 ms Puntlastijd: 0,1-2,5 s Langzame pulsen: 10 ms-2,5 s Snelle pulsen: 50 Hz-5 kHz Hotstarttijd: 0-1,5 s Hotstartstroom: 10-200% Stroominstelling: 100-250% Knop: Testbeveiliging Knop: Programmaselectie LED: Netspanning AAN, Overtemperatuur, Storing, Beveiligingscircuit, Display hold, Startstroom Stijging, Stroom 1, Stroom 2, Reductie, Eindstroom Rjdpjl Sm Hbjfx Abtsch Stroombron: IGBT-omvormer Ontsteking: Hoogfrequent of Lift-Tig Norm: EN 60974-1 "S" / CE Toortsaansluiting: EURO-centrale aansluiting met 5-polige stekker Toortskoeling: Watergekoeld koelsysteem 50 mm² aansluiting: Werkstukkabel 50 mm² aansluiting: Elektrodelaskabel Netaansluiting: 4 x 4 mm², 5 m lang Gasaansluitslang: 2 m Gewicht: 130 kg (300 AC/DC) Afmetingen L x B x H: 910 x 600 x 910 mm met gasfleshouder Gasfleshouder: 10 - 20 - 50 l gasfles Vind meer artikelen - nieuw en gebruikt - in onze shop! Internationale verzendkosten op aanvraag!

Condition: good (used), Two complete Frigoscandia spiral freezing tunnels with Sabroe compressor unit Rcedpfsw Hlz Hjx Abtoh The set consists of: 2 × Frigoscandia Gyrocompact GC76 spiral freezers Sabroe SAB163HF refrigeration compressor unit with insulated pressure vessel 1–2. Frigoscandia Spiral Freezer Model: Gyrocompact Type: GC76 Airflow configuration: North–South Number of tiers: 29 Tier spacing: 80 mm Belt type: stainless steel mesh Belt width: 710 mm Internal dimensions: 4810 x 6100 mm Overall dimensions: 9140 x 9000 x 3900 mm Both freezers are identical in design and specifications. 3. Sabroe Refrigeration Compressor Unit Compressor type: SAB163HF (2 units) Year of manufacture: 1995 Refrigerant: R717 (ammonia) Pressure vessel: insulated, 1305 litres Application: the unit served both spiral freezers

Condition: used, mileage: 224,900 km, power: 324 kW (440.52 HP), first registration: 07/2014, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 6x4, maximum load weight: 10,050 kg, empty load weight: 15,950 kg, wheelbase: 3,900 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space width: 2,500 mm, loading space length: 4,900 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, MAN TGS 26.480 6X4H-4 Flatbed with Crane and Work Basket Reg.: 7/2014 Only 224,900 km with receipts Euro 6 emissions class Long cab with bed Manual transmission Air conditioning, auxiliary heating Trailer hitch Hydraulics for trailer 6X4 Hydrodrive 3rd axle steerable Wheelbase 3900 mm Rear axle air suspension Tires 385/65 R22.5, tread approx. 60% Tires 315/80 R22.5, tread approx. 60% Flatbed 4900 mm Side walls 600 mm Vehicle length 9140 mm Unladen weight 15,950 kg Crane Atlas 290.2 A7 Year of manufacture: 2014 Radio remote control 4 Point outriggers 5th and 6th control circuits HAK 300 work basket 8 extensions in total, 7 hydraulic extensions 4.80 m / 4810 kg 6.70 m / 3150 kg 8.60 m / 2250 kg 10.60 m / 1690 kg 12.60 m / 1330 kg 14.60 m / 1100 kg 16.60 m / 930 kg Rodpfx Aewk N D Tobtjch 18.60 m / 830 kg 20.60 m / 740 kg (mechanical extension) Hook height approx. 24 meters German vehicle from a first owner in excellent condition. TÜV until October 2025. Export/net price: €89,900 All information is provided without guarantee, errors excepted.

Condition: new, Type 300C Surface planer: Table dimensions 300х1500 mm Cutterblock diameter 70 mm Redpfx Aed Nl Skjbtech Cutterhead rotating speed 5700 rpm 3 knives 300x20x3 mm Max table adjustment 4 mm Thickness: Table dimensions 300x660 mm Max cutting depth 4 mm Feed speed 7 m/min Cutterblock rotation speed 5700 rpm Max working height 220 mm Min working height 4 mm Mortising: Table dimensions 250х500 mm Longitudinal stroke 205 mm Trasversal stroke 95 mm Chuck (SX) 16 mm Chuck rotation speed 5700 rpm Motor 2,2 kW Accessories: service wrenches, guards on mortise chuck, planer guide. Weight 290 kg

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,825 h, throat depth: 250 mm, pressing force: 150 t, Application until 15.12.2024 - Bid submission obliges timely collection Very extensive range of tools included in the scope of delivery (see pictures) TECHNICAL DETAILS General information Make: Hämmerle Type: 3P 150/3100 Year of construction: 2010 Capacity and working area Bending length: 3100 mm Pressing force: 150 t Stroke: 400 mm Usable installation height: 915 mm Free upright clearance: 3200 mm Projection: 250 mm Speed Y rapid traverse: up to max. 180 mm/s Y-operation: 1-10 mm/s Y-retraction: 150 mm/s Working height and control Working height: 1060 mm Control system: MMC Bybend Operating data Operating hours: 21,825 h Dimensions and weight Length: 4810 mm Width: 2320 mm Height: 3345 mm Weight: approx. 15,000 kg EQUIPMENT Operator terminal: 15" TFT-LCD flat screen, network card, Windows XP, MMCBybend software Machine frame: Torsion-free steel screw construction Upper beam guide: Roller bearings with case-hardened guide rails Measuring system: High-resolution system Tool clamping: Hydraulic quick clamping for upper and lower tools Quick clamping of upper tools: Integrated scale Lower tool holder: Hämmerle 3-point Rsdpfx Aju Rbr Iobtech Table displacement: Hydraulic Safety system: AKAS laser, motorized height adjustment Side safety guards: Electrical monitoring Light curtain: At the rear Back gauge system: 5 axes with 2 stop arms and angular adjustable stop fingers Workpiece supports: 2 manually adjustable supports, length 750 mm Linear guide: On the lower beam, with two parking spaces (250 mm each) Control panel: With foot switch Support arm for operating terminal: Double joint, height-adjustable Extended equipment Rear of machine: Rear bending aid, infinitely programmable for H, a, W axes, 0-75° Additional bending aid: Rear Accessories for the machine Work area lighting: LED front and rear Barcode scanner: For calling up bending parts, programmed via Bybendpart

Condition: used, Complete machine: - 5510 sheet feeder - 4720 Reader module with VEKTOR camera - 4810 Mounting module - 6015 Folding module - 4507 Sequencer module, - 4806 pre-assembly module, - 5552 Insert module - 5552 Insert module - 501 Base unit module - 5571 Envelope feeder module, - 7512 Bypass module - 5535 Stacker module - Bicos 2009 operating system - ANV/DBDI PC for the control integrity system. Reading: VEKTOR camera Can read all types of barcodes, OCR, Datamatrix, barcodes and OME. Bicos version 2009 and ANV/DBDI version V 9.1.5.0 The entire system is configured to read Datamatrix. All modules are tested and packaged. Redpsqzhr Iofx Abtech Meter readings can be requested.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 25 h, functionality: fully functional, total height: 3,850 mm, total width: 2,060 mm, total length: 4,680 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 1,800 kg, power: 4 kW (5.44 HP), The TUKSTON stone separator was developed to offer a cost-effective contaminant rejection solution. The tilt, speed, and feed area are infinitely adjustable to achieve optimal separation accuracy. The TUKSTON is used after a screening machine, in the fine fraction, in the medium fraction, or in the oversize – depending on the requirement. Rcodpfx Abswhkrtstsh Simply combine the existing screening machine with TUKSTON and TUKWIND and separate foreign materials such as metals, stones, and plastics. The screening machine remains completely mobile and can therefore also easily be moved for cleaning or other screened materials. Easy separation of: - Rollable contaminants (stones) - Ferrous metals (optional magnetic roller with 2 - 20 kg pulling force) - Lightweight materials such as plastic films, wood chips, hard plastic, Styrofoam, etc. (optional TUKWIND wind sifter) - Usable for: compost, excavated soil, brick chippings, recycling / RC material, biomass, shredded rootstocks, etc. A 16A CEE power connection with only 4 kW power is required for operation!

Condition: good (used), Complete Frigoscandia spiral freezing line (2 units) with Sabroe compressor set Line composition: 1. Frigoscandia Spiral Freezer (1 of 2) Model: Gyrocompact Type: GC76 (configuration: North–South) Number of tiers: 29 Rsdpfxew Hlzas Abtsch Tier spacing: 80 mm Belt type: mesh, stainless steel Belt width: 710 mm Internal dimensions: 4810 x 6100 mm Overall dimensions: 9140 x 9000 x 3900 mm 2. Frigoscandia Spiral Freezer (2 of 2) Model: Gyrocompact Type: GC76 (configuration: North–South) Number of tiers: 29 Tier spacing: 80 mm Belt type: mesh, stainless steel Belt width: 710 mm Internal dimensions: 4810 x 6100 mm Overall dimensions: 9140 x 9000 x 3900 mm 3. Sabroe Refrigeration Compressor Set Manufacturer: Sabroe Compressor type: SAB163HF (x2) Year of manufacture: 1995 Refrigerant: R717 (ammonia) Insulated pressure vessel: 1305 liters Application: the complete set serviced both spiral freezers

Condition: used, mileage: 224,900 km, power: 324 kW (440.52 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 6x4, maximum load weight: 10,050 kg, empty load weight: 15,950 kg, wheelbase: 3,900 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space width: 2,500 mm, loading space length: 4,900 mm, loading space height: 600 mm, first registration: 07/2014, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, MAN TGS 26.480 6X4H-4 Flatbed with Crane and Work Basket Reg.: 7/2014 Only 224,900 km with receipts Euro 6 emissions class Long cab with bed Manual transmission Air conditioning, auxiliary heating Trailer hitch Hydraulics for trailer 6X4 Hydrodrive 3rd axle steerable Wheelbase 3900 mm Rear axle air suspension Tires 385/65 R22.5, tread approx. 60% Tires 315/80 R22.5, tread approx. 60% Flatbed 4900 mm Side walls 600 mm Vehicle length 9140 mm Unladen weight 15,950 kg Rcodowk N D Hjpfx Abtoh Crane Atlas 290.2 A7 Year of manufacture: 2014 Radio remote control 4 Point outriggers 5th and 6th control circuits HAK 300 work basket 8 extensions in total, 7 hydraulic extensions 4.80 m / 4810 kg 6.70 m / 3150 kg 8.60 m / 2250 kg 10.60 m / 1690 kg 12.60 m / 1330 kg 14.60 m / 1100 kg 16.60 m / 930 kg 18.60 m / 830 kg 20.60 m / 740 kg (mechanical extension) Hook height approx. 24 meters German vehicle from a first owner in excellent condition. TÜV until October 2025. Export/net price: €89,900 All information is provided without guarantee, errors excepted.

Condition: new, Type 400C Surface planer: Table dimensions 400х1800 mm Redod Nl Sfjpfx Abtsch Cutterblock diameter 70 mm Cutterhead rotating speed 5700 rpm 3 knives 400x20x3 mm Max table adjustment 4 mm Thickness: Table dimensions 400x760 mm Max cutting depth 4 mm Feed speed 7 m/min Cutterblock rotation speed 5700 rpm Max working height 220 mm Min working height 4 mm Mortising: Table dimensions 250х500 mm Longitudinal stroke 205 mm Trasversal stroke 95 mm Chuck (SX) 16 mm Chuck rotation speed 5700 rpm Motor 3 kW Accessories: service wrenches, guards on mortise chuck, planer guide. Weight 390 kg

Condition: used, The main line components and characteristics are the following: Perini rewinder, year 1993 2 unwind stands type4810 micro embossing calander model 470 C Deslcalander 4901, year 1993 Redpfewkfryjx Abtjch rewinder 6881 tail sealer 560C core making machine 211 2 core unwind stands 4202/4203 coreloader 622 log accumulator 511 2 log saws 140 log loader 619 2 Trimmex 5101 diverter Pulsar REDS 4-2-4 IEO, year 2012 Pulsar single beam modularconveyor system, typeC075, year 2012 primary packaging Casmatic CMW 42 EV, year 2001 1 bundling machine Wrapmatic BFA 25, year 1993

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,200 mm, total length: 1,200 mm, total height: 1,550 mm, overall weight: 270 kg, electrical fuse: 16 A, input voltage: 400 V, power: 7.5 kW (10.20 HP), drive type: Elektromotor, TUKWIND BASIC 7 add-on air classifier with special fan impeller and solid housing design. Our smallest suction fan is suitable for extraction at one suction point. Ideally suited for fine fraction cleaning, Styrofoam extraction, and small screening machines up to 4m drum length. Rsdpfx Abjwhfqwjtsch - Optionally can be supplemented with our PUSH blowers to increase efficiency. - Easy expansion option as a spot extractor with 10m hand suction hose. Facts: - Compact separation system for mounting on existing screening technology (mobile & stationary) - High suction power - continuously adjustable thanks to built-in frequency converter - Electric drive, hence very low maintenance costs - 7.5kW power requirement; Power plug: 32A CEE (16A fuse sufficient) A wide range of applications is made possible by the robust construction and individual adaptation to conveyor belts, etc. Fields of application: construction waste recycling (Styrofoam, plastic films), composting (plastic films), RDF cleaning (plastics), and more. The device can be purchased either separately or as a complete set. The set includes all necessary accessories such as: extraction hood, hoses, bends, quick clamps, net, etc.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 1,140 kg, electrical fuse: 63 A, input voltage: 400 V, drive type: Elektromotor, Attachment wind sifter TUKWIND PRO 18. The combination blower with suction and compressed air in one station. - Compact separation system for attachment to existing screening technology (mobile & stationary) - High suction and compressed air performance – infinitely adjustable by built-in frequency converter - Electric drive, therefore very low maintenance costs - 18.5kW power requirement; power plug: 63A CEE Rcjdswhfgropfx Abtoh A wide range of applications is enabled by the robust design and individual adaptation to conveyor belts, etc. Ideal size for drum screening machines of the 5-6m class: (SM518, SM620, T5, T50, T6, T60, MAXX, Nemus, Cribus 2800, Cribus 3800, and more) Fields of application: construction waste recycling (Styrofoam, plastic films, wood chips, hard plastic pieces), composting (plastic films), RDF cleaning (plastics), brick chipping cleaning, and more.