Used Auger for sale (369)

Condition: used, mileage: 1,000 km, power: 1 kW (1.36 HP), first registration: 02/2002, empty load weight: 810 kg, maximum load weight: 6,690 kg, overall weight: 7,500 kg, axle configuration: 4x2, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, Equipment: cabin, German machine, year of manufacture 2002, Küpper Weisser wet salt spreader, type: STA 95, with control unit, capacity: 1.5 m³, wet salt container, municipal control system, foldable tarpaulin cover, auger drive, unladen weight: 810 kg. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new SP inspection, and without new UVV inspection. You can find more trucks on our homepage at Godpfx Ahexl Skcsnebn We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability from the buyer's side. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided is without guarantee. We do not assume liability for errors or incorrect information in the listing. The buyer is obliged to independently verify the condition and specification of the goods/vehicles. Subject to prior sale, changes, and errors.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1087278, SPECIFICATION Table size 1321mm x 457mm X axis traverse 1270mm Y axis traverse 508mm Z axis traverse 635mm Spindle BT40 Spindle speeds 0-12000rpm Spindle motor 22.4kW Rapid feed rate 35.6m/min Toolchanger capacity 40 + 1 tools Approx. weight 6033kgs MACHINE EQUIPPED WITH: - HRT 210 4th axis Through spindle coolant Swarf auger Lighting Guarding Godpfxszbhn Rs Ahnebn Manual

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, operation weight: 2,000 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable boom, adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Immediately available – get in and start working right away! 🔥SPECIAL PRICE UNTIL THE END OF THE MONTH: ONLY €15,555 net plus VAT🔥 Are you looking for a reliable, modern, and immediately ready-to-use mini excavator in the 2.0-ton class? The LT-20 PRO from Tec-Point GmbH impresses with its strong performance, high-quality workmanship, and maximum comfort – perfect for construction, landscaping, and municipal work. Thanks to its compact design and modern load-sensing hydraulics, this machine is ideal for tight construction sites and yet powerful enough for demanding earthmoving and foundation work. The enclosed cab with heating makes the LT-20 PRO a true all-year-round professional machine! ⭐ Your advantages at a glance ✅ Side-swinging boom – ideal for tight working areas ✅ Telescopic undercarriage 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise & energy-saving control ✅ Axial piston pump with variable displacement ✅ Travel motors with high/low speed ✅ Double cast counterweights – increased stability ✅ Robust 230 mm rubber tracks – durable & wear-resistant ✅ Hydraulic quick coupler included ⚙️ TECHNICAL DATA Operating weight: 2000 kg Transport weight: 1820 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW Max. operating pressure: 23 MPa Bucket capacity: 0.04 m³ Digging depth: up to 2,270 mm Digging reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Gradeability: 30° COMFORT & EQUIPMENT ✔ Enclosed comfort cab incl. heating ✔ Ergonomic joystick control Gbedpfx Aex Hg D Ajhnon ✔ LED work lights ✔ Radio ✔ Comfort seat for long working hours ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel structure for maximum load capacity INCLUDED IN THE SET: 3 BUCKETS + HYDRAULIC QUICK COUPLER The scope of delivery includes: ✅ 25 cm ditching bucket ✅ 50 cm digging bucket ✅ 100 cm dozer bucket ✅ Hydraulic quick coupler ➡️ Immediately ready to start on any construction site! ➕ OPTIONAL, AVAILABLE AT AN ADDITIONAL CHARGE Hydraulic tilt quick coupler with tilting function Hydraulic earth auger set up to Ø 300 mm Hydraulic hammer SERVICE & WARRANTY 12 months warranty throughout Europe Spare parts & service directly from the warehouse in Rheda-Wiedenbrück IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Europe-wide delivery possible upon request. Location: Rheda-Wiedenbrück Our machines are immediately available and ready for use. You are welcome to inspect and test all our machines directly at our site. 🔥Only available until the end of the month: LT-20 PRO including hydraulic quick coupler at a special price of €15,555 net🔥 Secure this advantage now – the offer is only valid for a limited time! Request now & secure your advantage! Demand is high – secure your LT-20 PRO now. ➡️ Write to us directly via Maschinensucher or call us – we will be happy to advise you personally!

Condition: new, functionality: fully functional, power: 17.9 kW (24.34 HP), fuel type: diesel, color: yellow, operation weight: 575 kg, Year of construction: 2026, Equipment: trailer coupling, Kaeser Mobilair M 27 PE Compressor – NEW Kaeser Mobilair M 27 PE Compressor – NEW | 1.6 m³/min flow rate | 14 bar operating pressure | Kubota diesel engine D1105 | mobile construction compressor | compressed air treatment (A) NK/ZK | unbraked Technical data: Manufacturer: Kaeser Gjdpfozbzv Uex Ahnsbn Model: Mobilair M 27 PE Condition: NEW Operating pressure: 14 bar Flow rate: 1.6 m³/min Engine: Kubota diesel engine D1105 Engine power: 17.9 kW Tank capacity: 40 liters diesel Compressed air connection: 2 x G 3/4" Operating weight: 575 kg Chassis: with drawbar (for mobile use) Starting system: Electric start Highlights & Features: - Powerful construction compressor for professional applications - Compressed air treatment (A) NK/ZK - Robust Kubota diesel engine D1105 – reliable & durable - Compact design – ideal for mobile applications - High operating pressure – suitable for special applications - Maintenance-friendly design – easy access to all components - Stable chassis – flexible for use on construction sites - Made by Kaeser – premium quality in compressed air technology Areas of application: ✓ Construction & civil engineering ✓ Road construction & renovation ✓ Fiber optic & cable laying ✓ Compressed air tools (earth augers, rotary hammers, demolition hammers, etc.) ✓ Municipal applications & construction site operations Location: Warehouse D 46514 Schermbeck (North Rhine-Westphalia) – inspection & collection possible Delivery throughout Germany & internationally upon request Pricing from warehouse at Maassenstraße 91, D 46514 Schermbeck (Wesel district) All information without guarantee. Errors and prior sale excepted. Prices plus VAT / VAT excluded More compressors available! Also Kaeser M 31, M 50, M 57, etc. in stock ➡️ New & used machines, accessories & spare parts Buy Kaeser compressor | M 27 PE NEW | Construction compressor 1.6 m³/min | 14 bar | Kubota diesel engine D1105 | mobile compressed air compressor | Kaeser quality Your reliable partner for construction compressors & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure immediately available new products! If required, we will be happy to arrange a virtual inspection of the machine via video call.

Condition: used, Kilia grinder with a throat diameter of 130mm is a reliable and durable device. The design combines high efficiency with good quality of minced meat produced. Mainly intended for grinding fresh and slightly frozen meat and vegetables. Perfect for small and medium-sized production plants. It has two gears, pushing auger, and lifter for 200l meat bins. Manufacturer: Kilia Model: E130, 130mm Height: 1900 mm Width: 2100 mm Length: 1400 mm Weight: 1200 kg Capacity: 230 l Electric power supply: 400V 50Hz 3N Gbedpfxjzbk Ndo Ahnsn Total power: 11/17 kW Throat Diameter: 130 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Table size 660mm x 356mm Gbedpfeyrrx Usx Ahnsn X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Automatic lubrication system Lighting Enclosed guarding

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2019, Additional features * Stainless steel access ladder * Control panel * Electric spreading pattern adjustment * ESK+ electric spreading pattern monitoring * Wet salt equipment * Stainless steel folding roof * Contour marking * Ball point frame mount U290-U300 and U318 Gjdpoymmv Rsfx Ahnebn * Auger spreader * Preparation for rotating beacon (RKL) * Winter service marking * Yeti 1800 painted steel Other information: * Trade-in and purchase of vehicles and machines possible. * Sale price exclusive of transport and delivery costs. * No liability for printing and typing errors. * Errors, modifications, and prior sale reserved. * Offer is non-binding. * Photos may differ. Price applies to current condition. * All information provided without guarantee.

Condition: used, mileage: 1 km, first registration: 01/2004, driver cabin: other, gearing type: other, Year of construction: 2004, * Auger spreader * Silo container capacity 2.0 m³ * Hydraulic drive * Electric control panel * PVC folding roof * Access ladder, spreading disc and chute made of stainless steel Miscellaneous: Gbodpeymmwhofx Ahnon * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport and transfer. * No liability for printing or typographical errors. * Subject to prior sale, changes and errors. * Non-binding offer. * Photos may differ. Price applies to current condition. * All information without guarantee.

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2020, Further features * Support feet * Stainless steel access ladder * EcoSat control panel * Electric spreading pattern adjustment * ESK+ electric spreading pattern monitoring * Wet salt equipment * Folding roof, stainless steel * Contour marking * Ball socket frame mount U290-U300 and U318 * Standard rotating beacon (RKL) * Auger spreader * Winter service marking * Yeti 1800 steel, painted Other: Godpfx Asymmwbohnjbn * Trade-in and purchase of vehicles and machines possible. * Sales price exclusive of transport and delivery. * No liability for printing & typographical errors. * Errors, changes, and prior sale excepted. * Subject to change without notice. * Photos may differ. Price applies to current condition. * All information provided without guarantee.

Condition: used, mileage: 1 km, first registration: 06/2014, driver cabin: other, gearing type: other, emission class: none, Year of construction: 2014, Direct contact / Used vehicles and equipment: * Wet salt flat silo spreader with * Container volume 1.8 m³ of spreading material * Brine tank approx. 750 l * Hydraulic drive * Twin auger feeding system * Fully route-dependent control system * Foldable spreading disc * PVC folding cover Other information: Gjdoymmvdspfx Ahnjbn * Trade-in and purchase of vehicles and machines possible. * Sales price excludes transport and transfer. * No liability for printing or typographical errors. * Subject to error, modification, and prior sale. * Offer without obligation. * Photos may differ. Price applies to current condition. * All information provided without guarantee.

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm 22 kw motor Gbjdpfx Ast Tvk Ajhnon with discharge auger

Condition: excellent (used), Extraction installation Termoaspira 70M Power 7.5 kW Pneumatic filter bag cleaning system Air return to the hall Auger for chip removal Rotary airlock valve Gbodoyh T Sxopfx Ahnen

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, This 4 axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the HAAS VF 2 SS YT machine we have for sale. Contact us for more information. Standard equipment • 12,000 rpm spindle • High-speed 30+1 side-mount tool changer • Window air blast • 55-gallon coolant tank • Control system (Haas Control) • Ethernet interface • WiFi connection • Power failure detection module • Advanced tool management • Media display (M130) • HaasConnect (remote monitoring) • Safe Run • HaasDrop • Rigid tapping • Standard program memory (1 GB) • Stainless steel way covers • Phone charging station Included equipment • 4th + 5th axis preparation (pre-wiring) • High-speed machining option • Export packaging • Rotary table HRT210 • Direct control by mill CNC • Programmable coolant pump Gedjyaix Uspfx Ahnebn • Chip auger • Chip tray filter kit • Through-spindle coolant (300 psi / 21 bar)

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Wyma Vegetable peeling/polishing line. To consist of; Dolav bin tipper Wet hopper Vege-peeler with Auger (can have the auger removed for just polishing) Roller inspection table Water recycling unit Gbodpfxjzaa Iys Ahnsn All machinery is stainless steel. Machinery is decommissioned and ready for shipping

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 06220420, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 460 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, total height: 1,900 mm, total length: 2,820 mm, total width: 2,200 mm, overall weight: 2,300 kg, Equipment: documentation/manual, Double-column structure, with a round-section main sliding column and a rectangular-section secondary column. CNC with touch-screen for programming the head lift, clamping, and piece feeding, inverter-controlled blade speed adjustment, and a feed repeater settable from 1 to 9 times. Blade descent controlled by a probe, workpiece feed roller conveyor. Carbide blade guides and bearings, hydraulically locking clamps, auger chip conveyor, coolant system, lighting system, motorized blade cleaning brush, hydraulically adjustable belt tension. Operation and maintenance manual. With Extra 2m roller table 1pc (500mm width) Gjdoyvh Nxopfx Ahnobn NO CE mark, NO CE declaration of conformity

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 2,610 mm, total width: 1,100 mm, total height: 1,030 mm, WILK MAREL – a machine for grinding fresh and frozen products. The machine can be used as a standalone unit or as part of an integrated processing line. Power: 45 kW Gedpfx Aezb Iaaohnjbn Voltage: 3x400V – 50 Hz, or as required Control voltage: 24 V DC Material: AISI 304 stainless steel Auger: stainless steel Hopper capacity: 300 l Cutting blade: ø250 mm Perforated plate: ø250 mm

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ 1) Bale Shredder MHB: Special price starting from €22,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency converter (FU) – this regulates the speed of the shredding floor. The bales are placed on the shredding floor, and the feed of the shredder is activated. The tines of the shredder tear the straw from the bale and fling it into the hopper. Ideally, the combination of bale shredder and straw shredder is recommended here. Gbodsb Nulhepfx Ahnsn Technical data, bale shredder: Performance: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the screen size used in the straw mill, kW, number of straw mill). Without a straw mill, the bale shredder can even process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (l x w x h) Shredder motor: 5.5 kW, 380 volts Shredding floor feed: 0.75 kW, 380 volts Dimensions: 3750x1730x2460 mm (l x w x h) Weight: 400 kg 2) Straw Shredder MHZ 600 - 11/15 kW; immediately available Special price starting from €6,995 net Surcharge for the even larger straw shredder (18.5 kW) + €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380-volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm aperture With star-delta switch, overload protection, and 8 m power cable, ready for connection Discharge nozzle: 160 mm Discharge distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (l x w x h) Weight: approx. 240 kg --- Options available at an additional cost: Infeed auger + €970 net Cyclone (mounting on site by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial dust extraction system (demonstration model) + starting from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: starting from €1,620 net Special shredder extension, 3 m *other sizes will be calculated + €9,750 net Briquette press MPP 180 S; little used demonstration model 70 mm briquettes - up to a maximum of 100 kg/h Starting from €39,700 net * larger machines on request --- Description: The muetek bale shredder was developed for shredding round and rectangular bales of hay and straw. The shredder flanged onto the bale shredder shreds straw from all types of cereals, hay, corn, and miscanthus. The muetek machines in the MHZ/MHB series are characterized by their robust construction and solid design. muetek bale shredders in the MHB series are equipped with a chain conveyor, onto which the straw bale is placed using a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredding rotor; the feed speed is adjustable. The shredding rotor is equipped with several tines that tear open the straw bale. The straw separated from the bale is discharged. --- In principle, the machines work for dry raw materials: - Straw - Hay --- Shredding hemp only works with a special shredder Surcharge approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the raw material: Moisture content maximum 12%

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Gedpsff Sbiofx Ahnobn Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: good (used), Refurbished machine *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm Gbsdpfx Aho E Dqujnjn including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4 was manufactured in 2017. It features an X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a maximum spindle speed of 8,100 RPM and a robust table size of 1321 mm x 495 mm, supporting a maximum weight of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. Gjdoy Sg H Uepfx Ahnjbn • Spindle taper: CT 40 • Max torque: 122.0 Nm @ 2000 rpm • Table dimensions: 1321 x 495 mm • Max weight on table: 794 kg • Tool changer: 20 positions (umbrella type) • Rapid feedrate (X/Y/Z): 25.4 m/min • Table to spindle nose (min/max): 107 / 742 mm • T-slots: 5 slots, 16 mm width, 80 mm pitch • Power-on time: 18673:41:20 • Cycle start time: 3974:33:16 • Feed cutting time: 2117:17:34 • Included machine options/features: 15" color monitor, rigid tapping, USB port Additional equipment • Programmable coolant nozzle • Auger-type chip conveyor

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Automatic auger chip remover Blade size: 2950x27x0.9 Choice of cutting speed with inverterr: from 15-100 m/min Capacity: round 230mm, square 230x230mm Year: 2015 Possibility of cuts also in semi-automatic mode Gbedpstva Nhsfx Ahnen The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables.

Condition: refurbished (used), functionality: fully functional, rotational speed (min.): 1,450 rpm, rotational speed (max.): 1,750 rpm, Refurbished Landert Motor Manufacturer: Landert Motoren AG Bülach Type 132S-RFA4A, 1450/1750 rpm, 400V, 50/60 Hz, 5.5 kW (Grinding auger drive) Gbodew Rn Hxspfx Ahnen Price: € 1,350 net ex-location, plus packaging costs All technical specifications are subject to errors and omissions. Sale exclusively to EU countries.

Condition: excellent (used), Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, controller model: FANUC 21iMB, overall weight: 7,500 kg, spindle speed (max.): 12,000 rpm, spindle nose: BT-40, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, The used VICTOR A110 vertical machining center is a small/medium-sized 3-axis continuous CNC machining center; table size 1350×600 mm, X travel 1,100 mm, Y 600 mm, Z 560 mm, year of manufacture 2011 (installed in 2013), CE-compliant, equipped with FANUC 21i-MB CNC with Manual Guide i, rapid feed of 42 m/min, axis acceleration of 0.75G, working feed of 12 m/min, weight 7,400 kg. It is equipped with a BT-40 milling spindle, 12,000 rpm, 15 kW, cooled by dedicated chiller, belt-type chip conveyor, double internal auger, tank washing system, high-pressure through-spindle coolant, 32-position random tool changer, door, memory card slot, Ethernet RJ 45 port, and RS 232 serial port. Gbodpfx Ahjx Hap Esnsn Only just over 13,000 power-on hours and 7,000 spindle hours (original). PERFECT WORKING CONDITION!

Condition: ready for operation (used), Year of construction: 2011, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, Equipment: chip conveyor, rotational speed infinitely variable, Year 2011 Axis travels 1300x600x600 mm Machine weight 8,000 kg Box ways Spindle ISO 40 (DIN 69871) 12,000 rpm Spindle line chiller Gbjdpoxql Ncsfx Ahnsn High-pressure internal spindle coolant BLUM laser tool probe 24-position random tool changer Auger chip conveyor CNC HEIDENHAIN 530 Remote electronic handwheel

Condition: new, functionality: fully functional, power: 11.2 kW (15.23 HP), fuel type: diesel, fuel consumption per hour: 4 l/h, color: orange, operation weight: 1,550 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2026, Equipment: adjustable chassis, air conditioning, cabin, parking heater, rubber tracks, The SE18 mini excavator, belonging to the 1.8-ton class, impresses with its compact dimensions, powerful performance, and high-quality equipment for professional use. Equipped with the proven Kubota D902 diesel engine, modern hydraulics, a comfortable fully enclosed cab with air conditioning, a heating function with remote control, and a comprehensive set of buckets, this machine is ready for immediate use. Whether in civil engineering, gardening and landscaping, municipal applications, or on confined construction sites – the SE18 offers maximum flexibility, high reliability, and excellent value for money. ✅ Key Features at a Glance ✅ Kubota D902 3-cylinder diesel engine – reliable, fuel-efficient, and durable ✅ 1,550 kg operating weight – compact, stable, and powerful ✅ Fully enclosed cab with ROPS/TOPS – CE-certified and safe ✅ Air conditioning with heating function and remote control – comfortable operation in all seasons ✅ 2 auxiliary hydraulic circuits – suitable for hammers, grapples, earth augers, and more ✅ Adjustable undercarriage 1,000 – 1,250 mm – perfect for confined construction sites ✅ Side-swinging boom left/right – precise operation near walls, edges, and obstacles ✅ Mechanical quick coupler included ✅ 3 buckets included in the set ✅ Immediately available – delivery possible 🔧 Technical Data Model: SE18 Class: 1.8 t mini excavator Operating weight: 1,550 kg Engine: Kubota D902, 3-cylinder diesel Power: 11.2 kW Undercarriage: Rubber tracks, 230 mm Adjustable undercarriage: 1,000 – 1,250 mm Blade: 1,100 mm Boom: Side-swinging left/right Pin diameter: 25 mm Auxiliary hydraulics: 2 auxiliary circuits Fully enclosed cab, CE-certified, ROPS/TOPS Air conditioning with heating function, opening front window, sliding side window Included in the scope of delivery: ✔ Digger bucket 30 cm with teeth ✔ Digger bucket 50 cm ✔ Digger bucket 80 cm ✔ Mechanical quick coupler ✔ Hydraulic thumb / grapple thumb ✔ Air filter ✔ Fuel filter ✔ Oil filter ✔ Tool box ➡️ Get in, start, and work – the machine is ready for immediate use. 🛡️ Safety & Certification The machine is CE-certified and complies with the relevant European directives: Gjdsx H Tirepfx Ahnebn ✅ 2006/42/EC – Machinery Directive ✅ 2014/30/EU – EMC Directive ✅ 2011/65/EU – RoHS Directive The cab is equipped with a ROPS/TOPS safety structure and offers the operator protection, a clear view, and comfort. 🧰 Service & Warranty ✅ 12-month warranty throughout Europe ✅ Spare parts available directly from stock ✅ Service and advice from Rheda-Wiedenbrück ✅ Inspection and testing on site possible 🔥 Summer promotion price only €11,890 net – complete set included! 📍 Location: Rheda-Wiedenbrück, Germany 🚚 Delivery possible ✅ Immediately available ✅ Machine is ready for use Our machines can be inspected and tested on site. Contact us for more information, a customized offer, or a short-notice inspection.