Used Automated Trough Vibrators for sale (15,353)

Condition: as good as new (ex-display), functionality: fully functional, The ibg Ring Tester Large is engineered for automated crack inspection of bearing inner and outer rings with diameters ranging from 45 to 100 mm. The system conducts a structural analysis, followed by a line-scan inspection of the raceways as well as the inner and outer diameters, utilizing the eddyvisor C. After inspection, components are automatically classified and sorted as either OK or NOK. The testing unit is mounted on a durable metal frame designed for industrial manufacturing settings, featuring integrated compartments for the steel enclosures that house the measuring equipment and PLC (including Siemens PLC). Hodpfx Ahjy H Dkasajfh Clean, upright components are separated, fed into a transport wheel, and accelerated into rotation via belts. At the inspection station, adjustable rollers provide lateral fixation while probes perform surface defect detection; thereafter, components are automatically sorted into OK and NOK. Prior to testing, rings must be free of particles and residual liquids. The system follows ibg’s good-part-only policy, with NOK samples reserved exclusively for checking detection sensitivity during test runs. Infeed height: 1550 mm; discharge height: 1220 mm. For further information, please visit our website.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2795, power of the servo motor: 750 W, input voltage: 230 V, pneumatic connection: 7 bar, For sale is a high-performance Brother automated sewing unit equipped with a JAM TC 762 F automation module, offered as a complete industrial workstation. This system is specifically designed for automated pocket setting and precision sewing operations, making it highly suitable for denim, trousers, and workwear production. The integrated automation module enables accurate material positioning, clamping, and repeatable stitching cycles with minimal operator input. The unit combines a heavy-duty Brother sewing head with JAM International automation technology, delivering consistent production quality and significantly improved efficiency compared to manual processes. The machine has been used in a professional garment factory environment and was fully operational until factory shutdown. The unit has also been video recorded in full working condition on 01.04.2026. Key advantages: • Automated pocket setting and J-stitching • High repeatability and production consistency • Reduced labor dependency • Suitable for continuous industrial production • Complete workstation ready for integration • Production Capacity: Approximately 2,600 pockets per 8-hour shift. • Maximum Speed: Operates at up to 3,600 RPM. • Quick-Change System: Features a pneumatic mold change system, allowing for fast transitions between different pocket sizes and styles. • Versatile Operation: Capable of both semi-automatic and fully automatic modes, handling both pre-ironed and unironed pockets. Includes: • Brother automated sewing machine head • JAM TC 762 F automation module (material handling and positioning) • Electronic control system (TC 762 interface) Hfedoy Inyhjpfx Ahaoh • External PC workstation (monitor, keyboard, control unit) • Pneumatic system with regulators • Dual foot pedal controls • Industrial table and heavy-duty frame • Safety guards and integrated lighting • Fabric support and output handling system Technical details: • Manufacturer: Brother Industries, Ltd. (Japan) • Automation module: JAM International TC 762 F (Italy) • Type: Programmable automated sewing workstation • Power: 220V • Pneumatic system required • Integrated control and external PC operation Condition: • Used industrial condition • Fully operational prior to factory shutdown • Video recorded in operation (05.03.2026) • Maintained and serviced, latest maintenance 27.02.2026 • Typical signs of use consistent with production environment • Sold as-is, where-is, without warranty Typical applications: • Automated pocket setting • Denim and trouser production • Workwear manufacturing • Reinforcement stitching • Repetitive precision sewing operations Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, Hsdpfxsxf Hm Se Ahaofh – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. In good working condition. Inspection is possible by appointment. Available: NOW

Condition: good (used), Year of construction: 2005, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, BYSTRONIC, RB-NTB-2.20x4.00-L-AL Autom. Frame Bending Machine Bystronic / Lenhardt Hjdpfxsxyk R Rj Ahajfh Max. frame dimensions: 2200 x 4000 mm Profiles: aluminum and TGI (the machine is not built for TGI but it works ok.) Inkjet printer Domino A520i and bending tools included. Connection: 3/N/PE-50 Hz, 400V, 6 kW | Year: 2005. In good technical condition. Available: NOW

Condition: good (used), Year of construction: 1998, machine/vehicle number: 6852139, Knorr Stack Lift SL - 3, working area 75x105cm, paper height sensor, year of manufacture 1998, machine number 6852139, in good condition, immediately available. If interested, we are also happy to inform you about further machines in our inventory. Hedpfx Ahjxbzlneaefh You are welcome to inspect the machine at our facility by appointment.

Year of construction: 2016, condition: new, functionality: fully functional, machine/vehicle number: GDM-W220, Toa TX-16 — Fully automated gyoza (dumpling) machine Capacity: approx. 1,000 pieces per hour M251CE — Dough mixer Hfedpey Exnqsfx Ahajh Including mixer parts — Spare parts Vegetable washing machine — LWD-4 Commercial vegetable spinner — DRV 700 The machine has been tested and serviced; see attached documents. Please contact us for further details and pricing if required.

Condition: used, Outer-Ø: 315 mm Overall height: 70 mm Length of the adjusting screws: 200 mm Thread: M 30 x 2 maximum permissible static load: 11000 kp maximum load in general: 8000 kp Hsdsbx Eiuepfx Ahajfh

Condition: new, Eurotec Innovation RA11 – Circular Vibrator / Vibratory Finishing Machine for Mass Production (Made in Germany) The RA11 circular vibrator by Eurotec Innovation is a powerful and versatile vibratory finishing machine designed for processing large quantities of parts. It is ideally suited for industrial applications where efficiency, process reliability, and consistent results are essential. Manufacturer: Eurotec Innovation GmbH Hsdpohmp Dfofx Ahasfh Model: RA11 Numerous additional variants and custom configurations available upon request. 🔧 Technical Data: Gross volume: approx. 250 liters Effective volume: approx. 175 liters Channel width: 260 mm Power supply: 400V – 16A – 50 Hz Power consumption: approx. 2.5 kW Advantages: ✔ High grinding performance for mass production ✔ Uniform workpiece movement due to rising bowl bottom design ✔ Large screening area for efficient separation of parts and media ✔ Highly wear-resistant PU lining for long service life ✔ Low-maintenance and powerful vibration drive ✔ Modular design, expandable (e.g. magnetic separators, process water systems) 🏭 Applications: Deburring, edge rounding, and polishing Processing of bulk parts in large quantities Metal, plastic, and stainless steel processing Mass production in industrial environments The RA11 is the ideal solution for companies looking for a robust, high-performance, and cost-efficient vibratory finishing system for large production volumes. The evenly rising bowl bottom ensures reliable transport of workpieces to the integrated screening section, enabling continuous and automated processing. The generously sized screening area with tangential outlet ensures efficient separation of workpieces and media – optionally expandable with magnetic separators. An appropriate electrical control system is required to operate the machine. ----- Interested? Contact us – we will be happy to provide a non-binding offer. For more information and products, please visit our website. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is for presentation purposes only. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging platforms). We will first provide you with a non-binding offer, including our general terms and conditions as well as information on the right of withdrawal and legal notice, before any purchase or contract is concluded.

Condition: ready for operation (used), Year of construction: 2007, A complete machining line consisting of four Toyoda machining centers, Palltec transport and automation system, filter systems, chip conveyors and coolant supply systems is available. 1) 4x CNC horizontal machining center Toyoda FH 630 SX, year of manufacture 3/1: 2007/2008, control: Fanuc 31i, pallet dimensions X/Y: 630mm/630mm, travel X/Y/Z: approx. 1050mm/900mm/1050mm, max. workpiece diameter: 1170mm, max. workpiece height: 1250mm, max. pallet load: 1500kg, spindle taper: BT50, speed: 6000rpm, tool magazine: Fanuc FTS 330, tool positions: 330, operating hours range: approx. 65000h-76000h. All machining centers have the same tool management, but different operating hours within the above-mentioned range. 2) Rail-guided-vehicle system RGV Palltec FPA 630, year of manufacture: 2006. 3) Master computer system with Windows 7 Professional, interfaces: CNC/RGV/peripherals. The production line has all necessary peripheral equipment such as filter systems, chip conveyors and coolant supply systems from the manufacturers Knoll and Hyfra. Documentation available. An on-site inspection is possible. Hfedpjy Ey Tusfx Ahaeh

Year of construction: 2024, condition: new, ✔ It is used to transport the material to the horizontal shredders (suitable for Robust LD/H series) ✔ Length: 4000 mm ✔ Width: 330 mm ✔ Weight: 470 kg Hfodpfx Ahogtur Ieash

Year of construction: 2007, condition: ready for operation (used), number of axes: 3, This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a standard maximum transfer weight of 250 kg and a light axis maximum of 40 kg. The transfer path can be extended up to 2500 mm, accommodating various automation needs. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details. Hedoyudx Sopfx Ahasfh • Transfer weight: Standard max. 250 kg; Light axis max. 40 kg • Transfer axis/path: 1600 mm (optional 2500 mm) • Electronics: Automatic pallet recognition (EWIS) – Yes; Process control system interface – Yes • Pallet compatibility: Handles pallets up to UPC 300

Condition: excellent (used), RMS Electrodynamic Vibration Test System Vibration Exciter SW 3006+ Power Amplifier TGA 1500 Technical Data: Hjdpfx Aohyly Rehajfh Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Stroke pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible Scope of delivery: (see picture) (Changes and errors in the technical data may apply!) We are happy to answer further questions by phone.

Condition: used, functionality: fully functional, Year of construction: 2025, Weber Internal Vibrator IVUR 50 — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced Hfedpfxey A Hcqj Ahaeh - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 950 plus VAT | EXW Einbeck | Delivery upon request

Condition: good (used), Rotary vibrator, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, trowal system, continuous vibrator, vibration conveyor, oscillating conveyor Hfsdpfx Ahsiy Ef Aeaeh -Manufacturer: circlon, round vibrator Trowal vibrator with soundproof hood -Total volume: 230 liters -Type: CLS-230 -Working container: elastically mounted -Working basin width: 250 mm -Outlet: approx. 200 x 260 mm -Working basin height: 510 mm -Equipment: manual separating flap, infinitely variable engine speed via variator gear, liquid connection -Machine for: deburring, polishing, rounding edges -Transport dimension: 1700/1600/H2240 mm -Total weight: 1150 kg

Condition: new, Filling machine designed for packing delicate vegetables into any type of container. This machine is capable of operating with round, oval, square, or other shaped containers. Product is loaded into the machine via the elevator hopper, utilizing the thermoplastic mesh and its buckets, which transport the product to the loading conveyor, progressively unloading it and distributing it across the entire effective width of the belt. The loading belt transfers the product to the filling hopper, which is pre-adjusted according to the container type, and the container is filled by gravity and volume; any surplus product is diverted to the transfer conveyor. Hjdpfxexp Rhzo Ahajfh * The specified output rates may vary depending on the container and product types. Equipped with: * Filling vibrator * 4 speed variators in the control panel * Modular belt elevator. Dimensions: - Paddle height: 5 cm - Belt width: 40.5 cm - Paddle pitch: 20 cm - Discharge height: 1.65 m - Loading height: 62 cm * Production output may vary depending on the format and type of product being packed.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 35,000 rpm, number of axes: 5, This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 920x380 mm, with an impressive spindle speed of up to 35,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details. • Table size: 920 x 380 mm Additional equipment • EROWA Robot Multi automation Technical Specification Taper Size HSK 50 Hfodoyizugopfx Ahash

Condition: good (used), 1 x chip vibrating screen Schwanog Rapid SBM 63 GDS Year of manufacture: 1977 with blower In good technical and visual condition. Accessories: 3 x screens of your choice Dimensions: L: 970 x W: 390 x H: 110 mm The machine can be inspected under power at any time. Hfedpfx Ajy Atkzehaoh

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Hjdpoxqf Sdsfx Ahajfh Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. Hedpfx Ahoy Auvxoasfh 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: new, In general Minimum diameter of the workpieces: 25 mm Maximum diameter of the workpieces :270 mm Minimum width of the side for hexagonal workpieces: 25 mm Maximum width of the side for hexagonal workpieces: 200 mm Maximum stacking height :2 x 350 mm Maximum stacking weight: 2 x 450 kg Width of the automation: 1,902 mm Depth of the automation :740 mm Height of the automation: 2,202 mm Total weight of the automation: 1,000 kg Electrical connection :380 VAC Pneumatic consumption :< 100 L / min Roboter Payload :25 kg / 19 kg net Payload :35 kg / 28 kg net Safety Standard Protection with laser scanner Protection with integrated wall Hjdpfx Ahjh Dw Dijaofh Option Protection with light barrier Protection with separate grid wall Protection with separate transparent wall Protection with sliding doors

Condition: used, Year of construction: 1997, machine/vehicle number: 971004, functionality: fully functional, input voltage: 230 V, input current: 24 A, input frequency: 50 Hz, type of input current: DC, year of last overhaul: 2026, Equipment: CE marking, 5 C – Schaeffer SH2000-160 Industrial Snap Fastening Machine – Dual Head Semi-Automatic Unit Description: Hfsdsy Aiafepfx Ahaeh For sale is a Schaeffer industrial snap fastening machine, model SH2000-160, designed for efficient attachment of metal snaps and similar fasteners in garment production. This industrial unit features a dual-head fastening system and semi-automatic operation modes, allowing improved productivity and consistent results compared to manual setups. The machine is equipped with a belt-driven mechanical press system and integrated control panel with selectable operating modes. The machine has been used in a professional garment factory environment and is being sold due to factory closure. Its construction enables stable and repeatable fastening operations, making it suitable for continuous production processes where consistency and efficiency are required. Includes: • Schaeffer SH2000-160 fastening machine • Dual-head fastening system • Integrated motor (Georgii Kobold) • Electrical control panel with operating modes • Hopper feeding capability • Heavy-duty pedestal base • Foot pedal control Technical details: • Manufacturer: Schaeffer GmbH (Germany) • Model: SH2000-160 • Dual-head configuration • Belt-driven mechanical press system • Operating modes: manual / automatic / hopper • Power supply: 3-phase (according to machine plate) Condition: Used industrial condition. Operational prior to factory shutdown. Sold as-is, where-is, without warranty. Inspection possible prior to dismantling. Typical applications: • Snap button / press stud attachment • Denim and workwear production • Outerwear manufacturing • Industrial garment production Sales terms: This equipment is sold due to factory closure and is being liquidated directly from production use. Sold as-is, where-is, without warranty. Buyer is responsible for: – ensuring suitability for own materials and production No claims accepted after sale. Removal & transport: Buyer responsible for dismantling and transport. Serviced 27.2.2026. Video in working situation taken 5.3.2026.

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 230 V, pneumatic connection: 10 bar, Description: For sale is an ASS automated industrial sewing workstation for Automatic Side Seam and Inseam Seamer, supplied as a complete production unit with long table, pneumatic automation, and integrated control system. The workstation has been used in a professional garment manufacturing environment and was operational prior to factory shutdown. It is designed for repetitive, high-precision sewing operations and significantly improves productivity and consistency compared to manual sewing setups. Includes: • ASS automated sewing workstation • Extra-long industrial sewing table • Integrated ASS control cabinet • Pneumatic system with hoses and actuators • Thread stands and guides • Industrial sewing head (installed) Condition: Used industrial condition. Operational prior to factory shutdown. Serviced on 27.2.2026. Sold as-is, where-is, without warranty. Inspection possible prior to dismantling. Typical applications: • Waistband sewing • Long straight seams • Hemming operations • Garment assembly lines Hjdpfx Aey Ah Ubshaofh Sales terms: This equipment is sold due to factory closure and is being liquidated directly from production use. The buyer is responsible for verifying the condition and ensuring suitability for their own materials and production processes. No claims will be accepted after the sale. Removal & transport: Buyer responsible for dismantling and transport. Video from working situation was taken on 5.3.2026. Ask for video.

Year of construction: 2009, condition: used, Year : 2009 Type: Vibrating sieve Material : stainless steel Engine reference: Elettromeccanica Tarcisio Pugni PVF-F 200 Motor power: 1.1 kW / 1500 rpm Nominal sieve diameter: 900 mm Système de décolmatage : billes Machine dimensions: 110 x 130 x 120 cm Hfodeykb U Nepfx Ahaeh Plan for replacement of the grid: this item may be subject to a separate quotation.  

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Hedpfxoharwye Ahaefh Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Weight approx. 800 kg good condition

Condition: good (used), functionality: fully functional, “Hein Lehmann TS 4 – 9,5” for Sale Manufacturer: Hein Lehmann Type: TS 4 – 9,5 Deck size: 4.000 x 950 mm Number of decks: 1 Included: – Frame – Electrical Motor Vibrating screen will be overhauled, sandblasted and painted. Hfedpeyhnqxsfx Ahajh