large format casemaker
speed max. 20 cycles
3-5 piece covers possible
glue tank with viscosity control
board pre-stacker for single piece cases
machine in a condition like new!
MHGraphics is CMC dealer and can provide installation/training more
Size max 670 x 390 mm
min 205 x 140 mm
Joint width 4 – 15 mm
Width between boards 14 – 120 mm
Turn-in width, closed 8 – 15 mm
Width 223 – 708 mm
Height 130 – 428 mm
Thickness 1 – 4 mm
Width 95 – 328 mm
Height 140 – 390 mm
Board centre strip:
Thickness 1 – 4 mm
Width 6 – 90 mm
Centre strip roll
Thickness 0,3 – 06 mm
Width 6 – 90 mm
Speed 40 cycles/minute
-pendix automatic coupling machine
The machine can glue a sheet with a minimun size of 240x190mm and maximum size of 730x530 mm. The machine uses hot and cold glue.
Length: 5000mm Width: 4500mm Height: 1800 mm Total weight: 5000 kg
The year of production: 2008
Samed Innovazioni srl By REBORD Machinery, 59100 Prato, Italy
Case Maker Barmenia 167335
Year - - Serial-No. 167335
Automatic Case maker
-We would be very pleased with your visit - more machines on Stock-
-Can be inspect- more
Case Maker Smyth Freccia CM
The Automatic Casemaker machine can produce covers with hard backlining (having the same thickness of the cover), or soft backlining, fed by roll, having thickness from 0.5 mm to 0.6 mm.
In addition, the machine can produce covers "HALF CLOTH", (using 2 different types of coating material).
The covers "HALF CLOTH" are manufactured, following 2 different processes:
1st manufacturing process: cover production, using the same backlining material
2nd manufacturing ... more
Semi-automatic cover maker Zechini Roby Junior
The machine is in good condition, ready for production.
The machine is very easy to set up, operate and service. Thanks to the cardboard feeder, Roby Junior can produce up to 250 covers per hour.
Roby Junior is equipped with the following elements:
hot glue module
module for wrapping edges
module for manual positioning of cardboard
Types of veneers that can be used: smooth... more
Kolbus DA 260 used automatic casemaker, size 39x67 from 2009. Immediately available and only 8,9 million cases produced, board magazine for manual loading, centre strip infeed for the spine strip, cloth feeder with pile magazine, counter stacker delivery with following roller conveyor, corner cutter, viscosity control device
Minimum size (open case) 160 X 190mm
Maximum size (open case) 700 X 1100 mm
Minimum thickness of the board 1,5 mm
Maximum thickness of the board 6 mm
Productivity up to 250 pieces/ hour (as per size and operator skillfulness)
The weight of the machine is about: 1800kg
Electricity: 400 V 3 Phase 50 Hz
Electrical pover: 5KW
Viscosimeter: device for the automatic control of the glue viscosity.By computerized setting complete of glue mixer glue mixer glue level sensor and automatic water... more
Case maker - Crease and Presser Horizon HCM-1/HCP-1
Year 2009 - HCM-1/HCP-1 Serial-No. 312002
Book Block size min. 133.7x136.7mm, max. 297 x 215,9mm
Cover Material min. 169.7x322x4mm, max. 333x502.8mm
SEMIAUTOMATIC CASE-MAKER MACHINE MAGRAF KO-50x70
-greatest cover format; 460x700 or 460x1000mm
-largest thickness of material for bonded; 3mm
-speed operation; up to 150 pieces/h
-activate the machine automatically more
Endoline Stainless automatic case erector
Stainless steel, Automatic case erector, alan Bradley digital controls, 12 cases per min, product range Length 200mm min - 600mm max, Width 200mm min - 300mm max, Height 175mm - 450mm, with manual, 3Ph more
Hörauf BDM 20
Max speed: cases/min
Case size: min.130 x 190mm - max.380 x 680 mm
Soft Spine material width: 6- 80mm
Cover material thickness: 0.1 – 0.3 mm
Infeed belt feeder
In-line original Hörauf board double center length slitting device
Flexible spine unit
Lower table gluing unit
Gluing and pressing station
Suction transport cylinder
Head and Tail folding station
Delivery belt with pressure rollers more
Max. size of book cover 405 x 600 mm
Min. Size of book cover 120 x 160 mm
Thickness of board 1 - 5 mm
Strip of back book material width material thickness reel 7 - 90 mm 0,4 - 0,8 mm
precut 7 - 50 mm 1,4 - 4 mm
Capacity 12 do 40 cycles / min
Power requirement 9-11 kW
Dimensions: Length 4300 mm x Width 3900 mm x High 2100 mm
Weight: 6300 kg more
Copilot system with touch screen monitor, Board magazin for manual loading, Centre strip infeed, Chopper for the centre strip waste, Third transporter for stiff spine board, Viscosity control, Glue unit with pre-heated glue tube, Cloth feeder, Device for inside lining with hotmelt, Device for producing padded cases, Pressing station, Stacking delivery, Automatic case counter, Electrical specification: 400 Volt - 3 Phase - 50 Hz
Copilot system with touch screen monitor, Viscosity control, Glue unit with pre-heated glue tube, Cloth feeder, Device for inside lining with hotmelt, Device for producing padded cases, Pressing station, Stacking delivery, Automatic case counter
Copilot system with touch screen monitor, Board magazin for manual loading, Centre strip infeed, Chopper for the centre strip waste, Third transporter for stiff spine board, Viscosity control, Glue unit with pre-heated glue tube, Cloth feeder, Device for inside lining with cold glue, Device for quarter bound cases, Device for producing padded cases, Pressing station, Stacking delivery, Automatic case counter
Flight case - Flight cases - Flight boxes
Make ML Case GmbH
5 pieces available
Unit price 125 Euro ,plus VAT
every 5 ,ges. Price 500 Euro ,plus VAT
Height 900 mm
Width 710 mm
Depth 710 mm
Height lower part inside 120 mm
Height upper part inside 760 mm more
Constructiejaar: 2007Laadvermogen: 681 kgGVW: 3.169 kgAfmetingen (LxBxH): 400 x 205 x 200 cmSnelwisselsysteem: JaReferentienummer: 36628Serienummer: JAF00410N7M1460784MotorMerk: ShibauraModel: 4 Cyl turboRijwerkMateriaal: RubberVoorwielen: 10 R16.5Achterwielen: 10 R16.5Epic Auctions De online veiling opent vrijdag 16 oktober en sluit donderdag 29 oktober. Indien u zich registreert en meebiedt krijgt u een mail als u het hoogste bod hebt geplaatst. De kijkdagen voor deze veiling zijn op onze loca... more
We are ACCEPTING OFFERS for this unit! Visit our website EQUIPPO and send us your best offer now.
Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
• Safe payment methods with possibility to pay at delivery
Used 2017 Case CX250D hydraulic excavator with check valves, rear view camera, aux. hydraulics and central greasing
CE marked: No
EPA marked: No
50 Inspection points
Visit EQUIPPO to s... more
Case crawler excavator 1188 LC in demolition equipment - special design
Operating weight 27,600 kg.
Undercarriage hydr. extendable from 2,990 mm to 3,990 mm.
Cabin hydr. liftable + 2.000 mm with ROPS / FOPS cabin protection.
Working equipment with stretched mono boom, industrial stick with pushing cylinders, hydr. SW Verachtert CW 40, hydraulic system for hammer, scissors, swivel bucket use with Taklock quick couplings.
Bolt height end of the shaft for demolition use 11,50 meters.
The machine is... more
The Machineseeker Trust Seal gives buyers the ability to detect at a glance whether they are dealing with a trusted seller or not .
What do we verify?
Check of trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of accessibility to main phone number.
Credit report may not contain negative criteria.
Buyer complaints can lead to withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no entitlement to the grant of the Machineseeker Trust Seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.