Automatic stacker buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6

Automatic Stacker Curioni

Rednitzhembach, GermanyGermany dealership location
6758 km
1999
used
Automatic sheet stacker Eed0nm2 - Max. width of sheet: 4100mm - Max. depth of sheet: 2200mm - Mech. speed variable from: 0-138m/min - Max. pile height: 1800mm - Max. pile height onto Europallet: 1680mm - Complete electrical equipment: 380V - 50 cycles - Power required: 5,2kW - Total width: 5250mm - Total height: 3500mm - Total length (+depth of stack at rear hopper): 7500mm - Weight approx.: 5t more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bcv8g39ghl FRIULMAC RANDOMAX EVO DEFECT SAW AND END MATCHER ALL IN ONE -- Automatic defect cutting and end matching machine with: -- 7-1/2 HP (5.5 kw) trim saw -- 1-1/2 HP (1.2 kw) scoring saws -- 8 HP (6 kw) profiling unitsCapacities: -- 8” (200mm) min. to 78” (2000mm) max. length -- 2” (50mm) min. to 15-3/4” (400mm) max. width -- 1/8” (10mm) min. to 1-1/2” (40mm) max. thickness -- Conveyor belt speeds from 30-... more
3
Panhans S45 3.2m Automatic Beamsaw with Tilting Saw Carriage - 2005 CE Cutting length 3200mm Cutting depth 3200mm Cutting height max 60mm at 90 degrees Cutting height max 40mm at 45 degrees Main saw motor 7.5kw 350mm dia main blade Saw carriage feed speed 0 - 40m/min variable Pusher fence variable speed 0 - 25m/min forward, 40m/min return Cutting height adjustment with 4 levels Mitre cutting from 0 to 45 degrees Pusher with 5 panel grippers and 2 stops Bczupgru3f Touchscreen con... more
6
Type of fuel: Electric Height: 232 cm Fork length: 1.150 mm Bb9nrsfwrg Battery: 375 Ah 24 V Year of manufacture 2016 Lift height: 555 cm [...] Forksize 1150 x 570 mm, Battery 24V 3PzS 375Ah 2016, 220V charger, Tyres: Vulkollan more
4

bar automatic lathe TRAUB TK 42

Lüdenscheid, GermanyGermany dealership location
6444 km
1981
good (used)
- max. bar diameter 42 mm - turret with 6 stations - max. turning length 100 mm - 2 horizontal supports Dmjaw9d - 2 vertical supports - hydro feeding tube STENZEL dimensions LxWxH: - machine 2200 x 1200 x 1600 mm, weight 1800 kg - tube 5700 x 600 x 1200 mm, weight 500 kg more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glvrq9odi US CONCEPT CHB-12 Hauncher/Notcher;The US CONCEPTS CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end. -- Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with & Spec's: -- 40 MM horizontal spindle that moves up hydraulically past the table with the clampe... more
4

Push Fed Automatic Upstroke Crosscut Stromab Matrix

Liverpool, United KingdomUnited Kingdom
5686 km
2004
good condition (used)
Stromab Matrix Push Fed Automatic Upstroke Crosscut - 2004 CE A robustly built range of upstroke crosscutting machines designed for programmable and repetitive cutting from lengths of standard or random length long timber. The saw unit has a pneumatic upstroke action and is fitted with a Matrix type pusher unit for automatic feeding Specification Saw Unit TR500 Self braking motor 10hp Saw blade diameter 500mm Max cutting width (refer to chart)360mm Max cutting height (refer ... more


automatic ...
daily

New machines via email!

Stay updated!
6
Type of fuel: Electric Height: 228 cm Fork length: 1.150 mm Battery: 200 Ah 24 V Year of manufacture 2018 Lift height: 362 cm Bb0kvob70v [...] LIKE NEW! ONLY 1113 hours, NEW battery 24V 2PzV 200Ah, Integrated 220V high frequency charger, Forksize 1150 x 570 mm, Tyres: Vulkollan more
5
saw blade diameter:400 mm cutting diameter:130 mm stroke:150 mm capacity 90 degrees: square:115 mm feeds hydraulic /stepless:0 - 1,5 m/min Bu2mipxl engine output:2,0 / 2,6 kW saw blade turning speeds:10 + 20 U/min total power requirement:12 A dimensions of the machine ca.:1,5 x 1,1 x 1,85 m weight of the machine ca.:1,1 t more
3
cutting diameter 230 mm saw band length 2710 mm cutting width 225 x 225 mm dimensions of saw-band 2710 x 0,9 x 25/27 mm mitter cutting 45 ° cutting speed 28 / 56 m/min power capacity 0,85 / 1,2 kW coolant voltage 400 V total power requirement 1,3 kW weight of the machine ca. 475 kg Hrxjh2hd more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ksjzyi3f UNIQUE 313 Automatic Shaper for Miter DoorsMiters the end of (2) cabinet door rails on each [...] & Features: -- Automatic cycle controlled by maintenance-free PLC software for accurate & easy alignment of mitered corners; -- (2) 5 HP Dual-motors for shaping with 1-1/4" spindles. -- (2) Pneumatic clamps hold workpiece on either side while parts are being shaped, unlimited part length. -- 1" Max. part thickness, 4" max. part width. - Staggere... more
3

Automatic Punching Press Mubea Mubea VP600

Köln, GermanyGermany dealership location
6416 km
1994
used
pressure: t no. of strokes: Hub/min sheet width:1200 x 750 mm weight of the machine ca.: t :80 mm max. material thickness:20 mm Gvyz7l2x8 min. material thickness:1,5 mm Mubea plate punching machine with coordinate table and CNC control. more
2

Horizontal Bandsaws EVERISING 300HB Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Gtoxmyxr more
6
Type of fuel: Electric Height: 242 cm Fork length: 1.150 mm Battery: 240 Ah 24 V Year of manufacture 2015 Lift height: 375 cm [...] Heavy-Duty stacker! Battery 24V 3PzS 240Ah 2015, 220V charger, Reconditioned! Ptns3q Tyres: Vulkollan more
3
bore diameter 26 mm swing diameter 140 mm DIN 52022 Gr. 4 spindle diameter in front bearing 55 mm work height max. 1050 mm turning speed range 205 - 3280 U/min Uqvqibp7u rapid speed 2 m/min feed speeds infinitely variable 0 - 1200 mm/min number of slides 3 total power requirement 3,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,80 x 1,00 x 1,60 m stepped drive, with autom. electro-magnetic speed control for drive with 3 slides, with electrohydr. control acc.: variou... more
1

AUTOMATIC CNC SHAPER (SHAPE & SAND) UNIQUE 4500

North Carolina, United StatesUnited States dealership location
518 km
2006
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Etbidgf UNIQUE 4540 Shape and Sand (CNC) with (4) stations. -- General Description: (4) shaper heads of which (2) can be used for sanding. Ridged one-piece welded steel frame double spindle shaper (CNC controlled jump cope & cope) with two 45° tilting sanding stations. All heads are floating and displaced via rub collars making this machine suitable for shape and sand on pre-hogged arched raised panels. Jump cope on first shaper eliminates tear out o... more
4

Hacksaw - Automatic BEHRINGER Super A-200

Dreieich, GermanyGermany dealership location
6568 km
1982
used
cutting diameter 200 mm band length 350 mm cutting lenght max. 600 mm cutting range max. 180 x 180 mm dimensions of saw-blade 350 x 35 x 2 mm Dkdve9sp8 no. of strokes 52/66/81/104/132/162 Hub/min coolant voltage 380 V total power requirement 3,0 kW weight of the machine ca. 470 kg more
15

Horizontal Bandsaws HYD-MECH H10A 10" / 254mm Twin Pillar Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. HSA0307115 Capacity Rounds 10"/ 254mm Squares 10" x 10" / 254mm x 254mm Twin Pillar Yes Input 415/3/50 5hp approx Speeds 50-350 sfm Zi8lntk Twin vices Yes Stroke of feed vice 24" / 609mm Multi Feed Yes Fitted with Coolant, Variable Downfeed, Bundle Clamp and Swarf Screw. Equipment 10' / 3048mm Roller Tracking Length Machine - 7' / 2133mm. Tracking - 10' / 3048mm Width Machine - 7' / 2133mm. Tracking - 2' 10" 863mm Height Machine - 5' 10" / 1778mm. Tracking - 2' 8" / 813mm Nett we... more
6
Type of fuel: Electric Height: 235 cm G0cuvf3go Fork length: 1.150 mm Battery: 240 Ah 24 V Year of manufacture 2015 Lift height: 380 cm [...] Battery 3PzS 240Ah 80% 2015, 220V charger, Tyres: Vulkollan more
1
turning diameter ca. 100 mm Uqvp8qkjt turning length 100 mm number of slides 2 spindle hollow 42 mm face slide travel 55 mm turning speed range max. 5000 U/min greates pass round over bed 240 mm feed speeds 20 - 400 mm/min rapid speed 6 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t range L-W-H 2,80 x 1,20 x 2,00 m with connector field control more
8

Tool Presetting Equipment ZOLLER VENTURION 450 PILOT 3 SEMI AUTOMATIC TOO

West Lothian EH54 9HW, United KingdomUnited Kingdom
5581 km
2014
good condition (used)
2014, s/n V4R4C300074, c/w – CNC Automation package, power spindle with auto focus, SK40 and HSK63 reducers/adaptors, manual Balluff System RFID chip system, Data output, Tool management system (Zoller TMS), CAM Interface Hmnn28lj more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Ncfgz VOORWOOD A 178 Shape and Sand Feed Trough -- Single sided, feed-through, profile shaper with sanding. Capacity: -- 5" x 5" min. part size, 1/8" - 1-1/2" max. thickness, 1-3/4" max. profile face; - LH (left hand) in-feed side Equipped with: -- (6) workstations: (2) 5 HP - 6,000 RPM shaping stations with 1-1/4" dia. x 2-3/8" long spindles, max. cutterhead dia. 6"; -- (4) 1 HP - 1,500 RPM Turbosand sanding stations, 1-1/4" dia. x 4" long spindl... more
4
cutting diameter 250 mm saw band length 3010 mm cutting width 330 mm dimensions of saw-band 3010 x 27 x 09 mm cutting speed 35 / 75 m/min mitter cutting 45 ° power capacity 1,5 kW coolant voltage 400 V total power requirement 2,2 kW weight of the machine ca. 700 kg dimensions of the machine ca. 2,60 x 1,75 x 1,70 m 3gtisvayf - Fab. No.: 0003000633 more
6
Type of fuel: Electric Height: 180 cm Fork length: 1.150 mm Battery: 24 V Year of manufacture 2016 Ncvkx Lift height: 240 cm [...] LIKE NEW! DEMO 20 hours! wide track stacker, forksize 1150 mm, internal 220V high frequency charger, Tyres: Vulkollan more
2

Band Saw - Automatic - Horizontal BTM 560 A

Bühl, GermanyGermany dealership location
6593 km
1999
used
cutting diameter 560 mm saw band length 8020 mm cutting width 1,1 mm capacity 90 degrees: round 560 mm capacity 90 degrees: square 560 x 560 mm dimensions of saw-band 8020 x 1,1 x 54 mm feed length 550 mm Uqvwqkgcj feed length: multiple 9999 mm cutting speed 17 - 127 m/min control CEB, SAW III total power requirement 7,5 kW weight of the machine ca. 7,6 t range L-W-H 4,30 x 2,40 x 2,56 m acc.: roller track 3000 mm, roller track 1800 mm, roller track 850 mm, chip converyor, coolant more

Soag 6 Position Automatic Heavy Duty Drill

3AD, United KingdomUnited Kingdom dealership location
5845 km
1988
ready for operation (used)
Bcz9ydrr8a more
1
Elect./Voltage: Ssz3k0 VOORWOOD A 178 Shape and Sand Feed Trough -- Single sided, feed-through, profile shaper with sanding. Capacity: -- 5" x 5" min. part size, 1/8" - 1-1/2" max. thickness, 1-3/4" max. profile face; - LH (left hand) in-feed side Equipped with: -- (6) workstations: (2) 5 HP - 6,000 RPM shaping stations with 1-1/4" dia. x 2-3/8" long spindles, max. cutterhead dia. 6"; -- (4) 1 HP - 1,500 RPM Turbosand sanding stations, 1-1/4" dia. x 4" long spindles, all spindles adjus... more
6
cutting diameter 260 mm saw band length 2660 mm cutting width 400 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 160 x 260 mm capacity 45 degrees: square 160 x 160 mm capacity 90 degrees: round 260 mm capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm material feed length 500 mm saw band feed 17-120 U/min dimensions of saw-band 2660 x 25 x 0,9 mm drive saw-band 1,5 kW drive hydraulic 0,25 kW total power requirement 1,75 kW weight of the machine ca. 66... more
6
Type of fuel: Electric Height: 130 cm Jcc2pn7 Fork length: 1.150 mm Battery: 12 V Lift height: 80 cm [...] Scissorlift, BT Quality! 4 machines in stock, Tyres: Nylon more
2

Hacksaw - Automatic KASTO PSB 260 AU

Bühl, GermanyGermany dealership location
6593 km
1982
used
cutting diameter 240 mm band length 450 mm Izdymdh cutting lenght max. 750 mm cutting range - square - 240 x 240 mm cutting range - flat - 260 x 180 mm dimensions of saw-blade 450 x 40 x 2 mm total power requirement 3,7 kW weight of the machine ca. 1,1 t - partly overhauled - acc.: 1 sawframe as spare part, various saw blades, coolant more
5
total power requirement:4,2 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:1,5 x 2,5 x 2 m saw band length:4400 mm Cnb8uaxs cutting speed:15 - 150 m/min work height max.:750 mm capacity 45 degrees: round:rechts 330 mm capacity 45 degrees: flat:rechts 320 x 335 mm capacity 45 degrees: flat:links 305 x 335 mm capacity 45 degrees: round:links 305 mm capacity 90 degrees: flat:500 x 335 mm capacity 90 degrees: round:335 mm cutting range 30° flat:rechts 170 x 335 mm Cutting area at ... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Dmjlzo2 VOORWOOD A117B Shape And SandFeed through, single-sided Profile Shaper/Sander with CPU readout; feeds from right-to-left;. Specifications: -- 2-3/4" x 2-3/4" Min. part size, 3/8" - 1-1/2" max. thickness, and 1-3/4" max. profile faceEquipped with: -- (3) 5 HP Belt driven Shaping station -- (4) 1 HP - 1,500 RPM Disc sanding stations; 0° - 45° tilting on all units. -- 18 FPM Fixed feed speed, 1 HP feed drive; overhead holddown with (2) rows of t... more
4

stacker receiving tray Horizon ST-20

Germering b. München, GermanyGermany dealership location
6837 km
used
3 MONTHS LA-POSTPRESS WARRANTY except electronics offer consists of: Xqhkhhyz8 Horizon ST-20 stacker receiving tray - stack opportunities: flat or laterally shift - compatible with: Horizon MC-80a Horizon VAC-100a Horizon VAC-60Ha Horizon VAC-1000 Horizon VAC-600 - sheet size: max. 450x310mm; min. 185x128mm; - stack height: max. 320mm - dimensions: 652x550mm more
6
Type of fuel: Electric Height: 130 cm Fork length: 1.150 mm Battery: 12 V 2wn3hb8 Lift height: 80 cm [...] Scissorlift, BT Quality! 4 machines in stock, Tyres: Nylon more
6
cutting diameter 305 mm saw band length 5620 mm cutting width 305 x 380 mm cutting speed stufenlos 16-90 m/min total power requirement 7,2 kW single feed stroke 10-510 mm multiple stroke until 4590 mm main drive 5,5 kW hydraulic motor 1,5 kW coolant pump 0,12 kW dimensions of saw-band 5620 x 34 x 1,1 mm weight of the machine ca. 3,1 t dimensions of the machine ca. 2,2 x 3,1 x 1,80 m Condition: good Electric 380 Volt CNC-control Cooling equipment Qmo9zdlkm Diverse sawbands Roller con... more
9

Automatic cold saw SIMEC MEC 120BM 1LCN

Haaksbergen, NetherlandsNetherlands
6345 km
2004
ready for operation (used)
SIMEC MEC 120BM 1LCN Automatic cold saw for high volume production cutting Blade diameter: 250 / 350 mm Angle range: +/- 60 degrees min. cut capacity : 12 mm round cut capacity : max 100 mm Ccskufx Max cut Lenth 3000 mm Feeder 6000 mm plus more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bbwozn0oxa BALESTRINI C 70 Double sided Shaper -- Automatic feed through shaper profiles various chair, table and casegood components from a prepared template. The feed through system allows curved or extremely long parts to be shaped with little or no limitation. Equipped with: -- (2) Vertical shaper spindles, 7.5 HP motor each; 30 mm dia. spindles, 8,000 RPM cutter rotation; reversing rotation by switch for climb cut or conventional cut. Specifications:... more
3
cutting diameter 500 mm Uqvtq8nz9 capacity 90 degrees: square 500 x 500 mm saw band length 6900 mm dimensions of saw-band 6900 x 38 x 1,3 mm feed length 600 mm feed length: multiple bis 5999 mm cutting speed 18 - 90 m/min height of material-table 700 mm total power requirement 5,0 kW weight of the machine ca. 4,0 t dimensions of the machine ca. 3,70 x 2,30 x 2,20 m Accessories: coolant - 2-column-guided - more
5

stacker receiving tray Horizon ST-20

Germering b. München, GermanyGermany dealership location
6837 km
1998
used
3 MONTHS LA-POSTPRESS WARRANTY except electronics offer consists of: Horizon ST-20 Bztqoab stacker receiving tray - stack opportunities: flat or laterally shift - compatible with: Horizon MC-80a Horizon VAC-100a Horizon VAC-60Ha Horizon VAC-1000 Horizon VAC-600 - sheet size: max. 450x310mm; min. 185x128mm; - stack height: max. 320mm - dimensions: 652x550mm more
6
Type of fuel: Electric Height: 130 cm Fork length: 1.150 mm Battery: 12 V Lift height: 80 cm Vsidj3 [...] Scissorlift, BT Quality! 4 machines in stock, Tyres: Nylon more
6

Bar Automatic Lathe - Multi Spindle TRAUB TB 42

More Traub Tb 42
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1970
used
number of spindles - spindle passage - mm turning length - mm Hp0w7obwc Accessories: Cross drilling unit, revolver quick drilling unit, curve etching more
6

Automatic Punching Press IMS PHY 45

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2000
used
pressure 45 t Bctbcvrco2 no. of strokes 27/13 Hub/min sheet width - mm weight of the machine ca. - t more
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bcahfxjrhg CROUCH 315 Feed Through Shape and Sand:Feed through, single sided Profile Shaper/Sander; accommodates up to 2" thick material. Equipped with: -- (1) 7.5 HP - 6,200 RPM Shaping station, 4" - 7" dia. cutter cap., 1-1/4" dia. spindle, horizontal adjustments with digital indicator for shaper & fence settings. -- -- (2) 2 HP - 400 to 1,800 RPM Wheel/disc sanding units with AC inverter control; sanding spindles are 1" dia. and tilt 60° forward & 40... more


automatic ...
daily

New machines via email!

Stay updated!

to

to

Edit search
AUTOMATIC STACKER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close