Used Bagging for sale (1,745)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. Iijdey Urtfspfx Abvjc All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), A horizontal flow pack packaging machine RGD Mape is available. Packaging speed: 30m/min, max. packaging capacity: 100packages/min, product length range: 30mm-450mm, product width range: 10mm-240mm, product height range: 10mm-120mm, max. film width: 600mm, max. film outer diameter: 350mm, film core diameter range: 60mm-110mm, max. film roll weight: 35kg, machine weight: approx. 450kg. Documentation available. An on-site inspection is possible. Iedpozdunhofx Abveic

Condition: used, J-Tec Big Bag Discharge Station Bigbag Iijdpfx Aey Nttpsbvsc Discharge stations for big bags with vibrating hopper Height adjustable Max big bag dimensions: 120cm x 120cm x 280cm Overall dimensions: 180cm x 180cm x 345-500cm Material: Steel See our other listings

Condition: new, Autobag bags are available for sale in the following sizes: 150x250 1.5 million bags 200x320. 2.5 million bags Price Euro Palette 1 Pallet 0.02€ x Bag 2 Pallets 0.019€ x Bag 3 Pallets 0.018€ x Bag 4 Pallets 0.017€ x Bag 5 Pallets 0.016€ x Bag and so on 10 and more 0.01€ Bag Isdpfx Abju Ni Rpsvoic 1 million Autobag bags from 0.01€ each

Condition: like new (used), Year of construction: 2023, This machine is tailor-made for businesses seeking a simple and reliable packaging solution. The maximum speed is up to 1,500 bags per hour. Operation is easy, requiring just two simple steps: filling the bag from the top and sealing the bag. For sale: Autobag bags in the following sizes: 150 × 250 – 1.5 million bags 200 × 320 – 2.5 million bags Iodpfxsr E Dpzj Abvjic Price for full Euro pallet: 1 pallet: €0.025 per bag 2 pallets: €0.019 per bag 3 pallets: €0.018 per bag 4 pallets: €0.017 per bag 5 pallets: €0.016 per bag and so on 10 or more pallets: €0.01 per bag From 1 million Autobag bags: from €0.01 each Currently reserved.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: V1 01HOHS300KET5ESGR0SZ580, warranty duration: 12 months, The machine is usually always in stock. Short delivery times are possible. System Features 1. 2.5-meter-long chain conveyor (other lengths available upon request) 2. Adjustable bag former 3. Double film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Solid center fin seal structure 6. Four servo-controlled drives - Active material feed shaft Ijdsq Ikgkepfx Abvoic - Center seal - End seal - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in local language 11. Print mark control 12. Programmable bag length 13. Standard travel direction: left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 500 mm 6. Supply voltage: 1-phase 220V 50Hz 7. Total power: approx. 7.5 kW 8. Machine weight: approx. 450 kg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Production orientation: Vertical Conveying system: Infeed and outfeed optional and dependent on product Film feed: Rear Forming shoulder: Fixed Operator display: Touchscreen with memory function Drives & controls: 3 servo motors and PLC control system Packaging length: 50–190 mm Packaging width: 50–150 mm (depending on film width) Packaging height: Dependent on forming shoulder Speed: 15–30 bags/min, depending on material, pack size, and product Film width: 110–320 mm Power consumption: Approx. 4.6 kW Machine material: “304 stainless steel with surface treatment” Printer bracket: Suitable TTO or ink wheel printer optionally available at extra charge Delivery time: Current lead time under 10 weeks Z-conveyor system: €8,500 Features: Stainless steel configuration, suitable for the food industry • Application for granules and small parts such as screws • Sectors: Pet food, food (coffee, nuts), metal industry • Simple touchscreen operation with color icons • Safety protection covers • Can be integrated upstream/downstream with other machines • Customer-specific modifications/designs on request • 12-head scale integrated, hopper 0.8L Additional options (on request and at extra cost): • Euro hole punch etc. Iijdpfx Ajq Ikhajbvec Production orientation: vertical

Condition: new, functionality: fully functional, Features of the system: 1. Chain conveyor belt, 2.9 meters in length (other lengths available upon request) 2. Two custom-made units with fixed form shoulder, tailored to product dimensions 3. Single film loader + automatic film centering device 4. Box motion end sealing unit with single sealing jaw 5. Robust, central fin seal structure 6. Eight servo-driven actuators 7. HMI control panel 8. Four individual temperature controllers 9. Stainless steel 304 housing Iisdpfx Aek Dz Hwobvec 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard direction of operation: left to right Technical parameters: 1. Product length: L120-600mm 2. Product width: W70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products per minute (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph, 220V, 50Hz 7. Overall power: approx. 8.8 kW 8. Machine weight: approx. 1100 kg 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 512 m², volume flow: 50 m³/h, total width: 2,450 mm, total length: 8,500 mm, total height: 9,000 mm, warranty duration: 12 months, Equipment: documentation/manual, BAG FILTER - GALVANIZED STEEL STRUCTURE AIRFLOW RATE m³/h 50,000 FILTER FABRIC CLEANING VIA AIR JET WITH CONTROL UNIT FILTER FABRIC AREA m² 512 No. 04 ATEX-CERTIFIED ANTI-EXPLOSION PANELS Iijdpfx Aozfiy Iobvjc FILTERED MATERIAL DISCHARGE - SCREW CONVEYOR - ROTARY VALVE UPPER GUARDRAIL - SAFETY LADDER CONTROL PANEL No. 01 ELECTRIC FAN - kW to be defined with the user

Condition: excellent (used), functionality: fully functional, filter area: 238 m², input voltage: 380 V, volume flow: 30,000 m³/h, pressure: 6 bar, total width: 2,100 mm, total length: 6,600 mm, total height: 6,500 mm, Equipment: documentation/manual, BAG FILTER STRUCTURE: PRESS-BENT GALVANIZED SHEET METAL - BOLTED DESIGNED FLOW RATE: 25,000/30,000 m³/h N° 01 SETTLING ZONE N° 108 FILTERS, L. 2500 FILTER FABRIC: ANTISTATIC, 500 g/m² - POLYESTER FILTER CLEANING: MECHANICAL VIBRATION N° 06 ANTI-EXPLOSION PANELS - ATEX Iiodszfidgjpfx Abvoc MATERIAL DISCHARGE: SCREW CONVEYOR - ROTARY VALVE MACHINE CONTROL ELECTRICAL PANEL

Condition: ready for operation (used), Year of construction: 2007, A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible. Iiodpfxjzc Rfbj Abvsc

Year of construction: 2007, condition: good (used), Manual feed solid product packaging/bagging machine. For heat-sealable bags made of barrier material, GAS 35-40 microns; PA-PE 40 microns; Biaxially Oriented Polypropylene 25 microns. Packaging area dimensions: Iedsy Ug I Rjpfx Abvoic Height: 0 - 95mm Length: 50mm (minimum) Width: 30 - 300mm Coil dimensions: Outer diameter: 300/350mm Mandrel diameter: 70mm Maximum width: 60/600mm Machine dimensions: 3300 x 1100 x h1540mm With LINX model 4900 ink jet printer. DOCUMENTATION AVAILABLE Ref: SSM-004X

Year of construction: 2015, condition: excellent (used), PLASTIC BAGS MAKING MACHINE VAMA VC 600 Germany made in 2015. Technical data Manufacturer: VAMA GmbH Model: VC 600 Production year: 2015 Technical parameters The width of the film maximum: 600 mm The maximum length of the bag: 1200 mm Film thickness: 25-80 μm weld Capacity: 60 - 90 bags per minute Rolling rollers 2 with roll diameter: 700 mm Stacking position: 25-50 pieces Iisdpfjg D Arnex Abvoc Machine for the production of plastic bags Excellent condition, located in Poland

Condition: good (used), Year of construction: 2008, functionality: fully functional, A complete weighing and bagging system previously used for packing hard-boiled sweets, but suitable for all manner of snack foods, confectionery, nuts, seeds, etc. Features the following equipment: 1 x AST-2-1 stainless-steel hopper and vibratory feeding pan with manual gate. Hopper internal dimensions - 795mm long x 795mm wide. Overall dimensions - 1100mm long x 880mm wide x 1150mm high. 1 x AST-3-5 stainless-steel bucket elevator. Each bucket dimensions - 380mm long x 115mm wide x 60mm high. Overall dimensions - 2650mm long x 680mm wide x 3400mm high. 1 x A10 -10-head multi-head weigher with touch-screen control panel and 1.6L smooth weighing pans. Programmable for up to different 50 programs. 1 x Stainless-steel gantry with height-adjustable feet and wheels. Overall dimensions - 1220mm wide x 1320mm deep x 1680mm high. 1 x Gainsborough Engineering Ltd GV2K1 vertical form, fill and seal bagging machine. Serial number – GV081395. Date of manufacture - 2008. Sealing bars: Horizontal - 250mm long. Vertical - 250mm long. Bag size range: Minimum - 50mm x 50mm. Maximum - 200mm x 200mm. Output / Speed - up to 70 packs/minute depending on pack dimensions. Electrical requirements - 230 V / 50 hz /1 phase. Power - 13 Amps. 2 x Markem Imaje SmartDate 5 thermal transfer printers (1 x 53mm and 1 x 128mm). 1 x Gainsborough Engineering Ltd outfeed inclined conveyor. Belt dimensions - 2000mm long x 285mm wide. Height adjustable outfeed height (max. height 1100mm). Overall footprint of system (in current setup) - 3.7m long x 3.5m wide x 3.4m high. Isdszaw Nujpfx Abvjic

Year of construction: 2013, condition: excellent (used), functionality: fully functional, Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Serial number - QH20130065. Date of manufacture - 2013. Belt width - 245mm wide. Iijdpfxsy Um T Hj Abvoc 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Serial number - GV131595. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Fully Automatic Paper Bag Making Machine for Sale – WFD-550 Fully automatic paper bag making machine, model WFD-550, manufactured in 2020, available for sale. The machine is in good working condition and was used in production for only 2 years. It has been regularly maintained and operates reliably. Main features: Iisdpeyuf T Rsfx Abvjc - Production of paper bags with twisted handles - Production of paper bags with flat handles - Fully automatic feeding and forming process - Stable and efficient operation The machine is suitable for industrial production and can be used for manufacturing shopping bags, packaging bags, and other paper products. Condition: good technical condition, ready for operation. Price: negotiable For serious inquiries, please contact by email.

Condition: ready for operation (used), Year of construction: 2002, A Technibag bag-in-box filling machine for filling liquids into BIB bags is available. Products: wine/juice/etc., filling capacity: approx. 140/h, bag volume: 3l/5l/10l/20l. An on-site inspection is possible. Iodpfx Ajzb Nlkjbvoic

Condition: ready for operation (used), functionality: fully functional, color: green, Year of construction: 2008, operating hours: 1,000 h, The machine is being sold complete, including belt conveyor, handling unit, filling plant, and RC sack palletizing system. Comprises: Bakomat 4B handling unit, 10m³ hopper, conveyor trough type FR 600 x 1650, belt conveyor BTL 500x42,525, year 2005, belt conveyor BTL500/2/24-5.5m, year 2005, belt dosing scale Chrotec, vertical form-fill-seal machine Binder und Co, MK-X, 400 bags/hour with 25kg bags, approx. 13,000 operating hours, year 2005, sliding conveyor PD 2455/600, RC robot cell by Packmann d.o.o, year 2005, complete Kuka KR200 2E robot, robot year 2000, approx. 5,000 operating hours, pallet wrapping machine Plator LCN. All existing plans related to dimensions and further information are available in the attached PDF. Products produced: - Fine chippings 1-2mm Iodpovw Urwsfx Abveic - Fine chippings 2-4mm - Chippings 4-8mm - Premix chippings/sand - Play sand 0-2mm - Washed sand 0-4mm - Scented play sand - Concrete gravel 0-16mm - Rounded gravel 8-16mm

Condition: good (used), functionality: fully functional, machine/vehicle number: W&H 18499 / W&H 14623 /Garant 1723G, total width: 2,200 mm, total length: 130,000 mm, total height: 2,300 mm, We are offering this ready-to-use Windmöller & Hölscher Triumph 3A with QMS 992 inline 4-color flexo printing unit. - For single- or double-ply paper bags - High-bottom folding (Bodendeckblatz) - Machine is currently in production and fully operational Bag Specifications: - 1 or 2-ply paper - Bag width: 180 – 320 mm - Bag gusset: 60 – 180 mm - Bag height: up to 510 mm (610 mm cut-off / tube length) Tube length / cut-off: - 460, 490*, 500, 530*, 550*, 580*, 600, 610* mm (*each format includes 4 printing cylinders) Other formats available only without printing capability. Format plates / bag widths: - 160, 165, 170, 175, 180, 210, 230, 250, 260, 300, 320 mm Max. output (depending on bag size): 40–60 bags/min Max. roll diameter: 1000 mm / 39" Max. roll width: 102 cm / 40" Core diameter: 76 mm / 3" QMS 992 Flexo Printing Unit: - 4-color flexo printing (without doctor blade) - Max. printing length: 1000 mm / 39" We have three additional Triumph 3A machines including QMS 992 inline printing units for sale! Ijdpfx Absyrqxaovsic If you are looking to produce larger bags (up to 320 x 180 x 760 mm), we would recommend a different machine from our inventory. If you have any questions or require further information, please feel free to contact us. All machines are immediately available!

Condition: excellent (used), Condition: used, shows normal signs of use, fully operational Manufacturer: Vetter (Germany) Country of manufacture: Germany 📦 The set includes: 2x Vetter air lifting bag Type 1/6 complete set of air hoses (yellow + red) quick couplings carrying bag the set exactly as shown in the photos ⚙️ Technical specifications: Model: Type 1/6 Maximum lifting capacity: approx. 3.2 t (32 kN) – each bag Max. operating pressure: 0.5 bar Volume: approx. 403 L Air requirement: approx. 603 L Hoses: DN 19 mm working pressure 1 bar (14.5 PSI) ISO standard Iiodoy Af Tnspfx Abvsc 🛠️ Applications: technical rescue (fire department) lifting of vehicles and machinery workshops and industry maintenance and emergency operations 📌 Additional information: renowned German manufacturer – Vetter complete set, ready for immediate operation solid, durable construction fast and safe lifting of heavy elements sold as shown in the photos

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x PFM flow wrapper with peg and chain infeed conveyor and painted mobile frame. Model - Swift. Serial - D.1294. Date of manufacture - 2011. The PFM Swift is a horizontal flow-wrap machine with rotary crimp jaws, designed to wrap at speeds of up to 100 bags per minute. An extremely versatile, compact and reliable machine, the Swift will accomodate a wide range of products, with its standard adjustable forming box, providing the solution to quick and efficient size changes. Iiodpey Unmuofx Abvsc Adjustable folding box - up to 90mm wide. Can wrap using clear or printed film. Electrical requirements - 230 V / 50 hz / 1 phase. Power - 14.5 Amps / 3.1 kW. Overall dimensions - 4150mm long x 950mm wide x 1950mm high. Supplied without the adapted infeed system, will be back to the standard infeed system.

Condition: used, Year of construction: 2010, Overview  This semi-automatic pouch filling machine was manufactured in 2010 by AIT. The machine is available for sale because it is no longer in use by the seller. It is suitable for filling liquids and semi-liquid products into Doypack bags with screw caps. Thanks to its simple and user-friendly interface, the AIT DOYPACK is ideal for small to medium production volumes. The machine is promptly available. Technical data Capacity: Up to 600 bags/hour (depending on product viscosity and format) Volume range: 0.5L – 3L Pressure: min. 6 bar Bag type: Doypack with screw cap Filling principle: Gear pump with high-precision flowmeter Operation: Semi-automatic (manual bag positioning, automatic filling and capping) Frame: Stainless steel Cleaning/Sterilization: Integrated cleaning and sterilization functions Control panel: Touch screen Scope of Delivery  AIT DOYPACK semi-automatic filling and capping machine Integrated gear pump and flowmeter Touch screen control panel Iijdpswiu Hkjfx Abvsc

Year of construction: 2025, condition: new, The Bag Opening Silo is a compact and flexible solution designed for efficient emptying of small and big bags containing cement, lime, and other powdered materials. Big bags can be safely and easily unloaded using a forklift or other lifting equipment, ensuring a clean, safe, and controlled material transfer process. This system represents a practical solution for construction sites and production locations where bulk cement delivery by tanker is not possible, enabling continuous use of bagged materials. In addition to material emptying and dosing, the system can also be used as a temporary or permanent intermediate storage solution, providing full protection of the material from moisture, dust, and other external influences. The system can be easily connected to existing mobile and stationary concrete batching and mixing plants, allowing fast integration into the existing production process. Upon customer request, the system can be equipped with load cells for precise material weighing and control. Iijdpfx Abezcwrhovjc The discharge capacity is 15 m³/h. Thanks to its compact construction, easy handling, and high functionality, the Bag Opening Silo represents a reliable and practical solution for handling powdered materials at various construction sites and production facilities. Available models: - BS 02 - Capacity: 2 m³ - BS 04 - Capacity: 4 m³ - BS 06 - Capacity: 6 m³

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: MB400-2026, total width: 2,200 mm, total length: 9,000 mm, total height: 2,200 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 3,000 W, power: 15 kW (20.39 HP), overall weight: 5,500 kg, input voltage: 380 V, installation height: 2,200 mm, MASTER BAG 400 – MODEL 2026 High-Speed Automatic Paper Bag Making Machine The MASTER BAG 400 Model 2026 is a fully automatic high-speed paper bag making machine designed for manufacturers seeking productivity, precision, automation, and sustainable packaging solutions. Combining advanced servo technology, PLC control, and intelligent automation, this machine delivers reliable performance for food packaging, bakery packaging, pharmacy packaging, grocery packaging, retail packaging, and takeaway packaging applications. This Automatic Paper Bag Machine produces high-quality flat and gusset paper bags with excellent accuracy and consistency. It is an ideal investment for companies looking to replace plastic packaging with eco-friendly and recyclable paper packaging solutions. The MASTER BAG 400 serves as a complete Paper Bag Production Line and Industrial Paper Bag Manufacturing Equipment solution, suitable for supermarkets, bakeries, pharmacies, restaurants, coffee shops, delicatessens, food service providers, and retail stores. KEY FEATURES • Fully Automatic Operation • High-Speed Production up to 600 Bags/Min • Servo Controlled Paper Bag Machine • PLC Controlled Paper Bag Machine • CE Certified Design • Heavy-Duty Industrial Construction • Low Maintenance Requirements • Energy-Efficient Operation • Water-Based Glue System • Automatic Web Guiding • Intelligent Tension Control • Fast Job Changeover • High Output Production System TECHNICAL SPECIFICATIONS • Paper Tube Length: 100–450 mm • Paper Bag Width: 50–260 mm • Bag Mouth Height: 15–20 mm • Insert Size: 20–120 mm • Paper Thickness: 40–80 gsm • Production Speed: 100–600 pcs/min • Paper Roll Width: 800 mm • Roll Diameter: Max. 1000 mm • Air Pressure: 0.6–1.2 MPa • Installed Power: 7 kW • Machine Weight: 1700 kg • Dimensions: 4200 × 1500 × 1800 mm STANDARD EQUIPMENT Automatic Unwinding Device, Pneumatic Air Shaft Ø76 mm, Pneumatic Control System, Magnetic Powder Brake, Tension Controller, Web Guide Controller, Feeding Roller System, Water-Based Glue Tray, Bag Forming Device, Mold Fixing Device, Gusset Forming Unit, Printing Registration Sensor, Traction Roller, Precision Cutting Knives, Electric Cabinet, Servo Drive System, Traction Servo Motor, PLC Control System, AC Contactors, and Industrial Sensors. APPLICATIONS Pharmacy Paper Bags, Bakery Bags, Bread Bags, Sandwich Bags, Snack Bags, Fast Food Bags, Food Service Bags, Fruit & Vegetable Bags, Grocery Bags, Retail Shopping Bags, Takeaway Packaging Bags, Kraft Paper Bags, Eco-Friendly Paper Bags, Sustainable Paper Bags, Recyclable Packaging Bags, Food Packaging Bags, Medical Packaging Bags, Supermarket Bags, Restaurant Packaging Bags, Coffee Shop Bags, Delicatessen Bags, Organic Food Packaging Bags, Custom Printed Paper Bags, and Promotional Paper Bags. INDUSTRIES SERVED Food Packaging Industry, Bakery Packaging Industry, Retail Packaging Industry, Medical Packaging Industry, Grocery Packaging Industry, Restaurant & Takeaway Packaging, Coffee Shop Packaging, Supermarket Packaging, Sustainable Packaging Industry, and Paper Converting Industry. Iiodpou I R Duofx Abvjc Paper Bag Making Machine, Automatic Paper Bag Machine, High Speed Paper Bag Machine, Food Packaging Machine, Bakery Bag Machine, Pharmacy Bag Machine, Grocery Bag Machine, Sandwich Bag Machine, Snack Bag Machine, Retail Paper Bag Machine, Sustainable Packaging Equipment, Eco-Friendly Packaging Machine, Kraft Paper Bag Machine,

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, Möllers Bag Palletizer (10–30 kg Bags) Möllers automatic palletizer for handling and stacking bags weighing between 10 and 30 kg. Type: low-level infeed palletizer Estimated capacity: approx. 600 bags per hour Currently still in operation until the end of 2026 at a throughput of approx. 200 bags per hour Inspection possible by appointment Electrical cabinet and control system are not original; upgraded with a Siemens S7 PLC by Global Services CMS Paper documentation available Preferably sold together with the Möllers Stretch Hooder (see separate listing) The machine is in working condition and can be inspected while running. Möllers bag palletizer Möllers palletizer for bags Möllers sack palletizer Iiodpfxeza Dibs Abvec Möllers low level palletizer Low level infeed palletizer Automatic bag palletizer Sack palletizing machine Bag stacking machine Industrial bag palletizer 10-30 kg bag palletizer Used Möllers palletizer Siemens S7 palletizer Bag handling palletizer Palletizer 600 bags per hour Used sack palletizer for sale Automatic palletizing system for bags