Used Baguette Long Dispenser for sale (7,089)

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, Used baguette long moulder model FVF 800 Weight range approx. 50 – 1200 g Kodpjy N S Dysfx Ap Dsdu Output/hour approx. 1,200 pieces - Stainless steel housing - Mobile undercarriage - Various new parts (bearings, drive shaft, main switch, new belts) - Technically inspected, cleaned Fully functional (Photos = sample model) All prices are net plus VAT, ex works Syke. Available at short notice (shipping possible at buyer's cost) Advance payment required with order We operate exclusively under our General Terms and Conditions. Subject to prior sale, technical modifications, and errors.

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Complete MECATHERM line from 2011, consisting of an H1 volumetric divider and an RT2 shaping unit with an integrated pre-fermentation and resting system. Industrial line designed for the automated production of baguettes, long loaves, and other bakery products, depending on the shaping equipment used. Kedez Sfa Dspfx Ap Dodu Line composition: - MECATHERM H1 volumetric divider - Complete MECATHERM RT2 shaping unit - Integrated pre-fermentation and dough resting system - Shaping and elongation system - Automatic depositing system onto trays - Several additional shaping accessories and equipment - Conveyors and connecting equipment Features: - Manufacturer: MECATHERM - Year: 2011 - H1 divider capacity: up to 2,500 pieces/hour, depending on the weight - Production adapted for baguettes and various loaf sizes - Automated line from dividing to depositing onto trays Complete line sold with numerous accessories. Additional information and video available upon request.

Condition: used, Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning the dispensed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components in separate channels simultaneously towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the application of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio, ensuring maximum process reliability. At the same time, pressure-, moisture- or shear-sensitive potting media can also be processed gently without any changes to the material being feared. Users also benefit from simple and quick maintenance, long service life and considerably reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating or dispensing head heating, these systems can be flexibly adapted to the respective task. Your advantages No dependence of dispensing accuracy on temperature, pressure or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (material and application-related) Important functions Simultaneous actuation of the cylinders by a common stroke mechanism enables a homogeneous mixing ratio Sensory monitoring of the inlet and outlet valves as well as the cylinder filling Temperature control of the material by mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure and viscosity of the casting resin Precisely reproducible and highly accurate results Maximum process reliability Application Filling potting, sealing, bonding, application of thermally conductive materials, encapsulation (glob top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on the mode of operation "Everything from one source: We will gladly offer you suitable financing for your project." You can find more dispensers - new and used - in our shop! International shipping costs on request! Kdjdpfx Apjzc Nple Dou

Condition: used, Bluhm Legi-Air 4050 RH Label Printing and Dispensing System Bluhm Legi-Air 4050 RH label printing and dispensing system with Zebra ZE500-4 print module The Bluhm Systeme RH Legi-Air 4050 is a powerful labeling machine with an integrated thermal transfer printer, ideally suited for automatic product labeling in production and logistics processes. The unit is equipped with a print module, applicator, control unit, and numerous interfaces, enabling precise and reliable label application. Motor-driven large roll unwinder Label rolls with a roll diameter of up to 430 mm and 900 meters of label material ensure long, uninterrupted production runs. A tandem operation ensures continuous production. Dispensing head Quickly interchangeable dispensing heads allow for the processing of label sizes from small identification labels to DIN A5-sized EAN128 shipping labels. The Quick-Change option enables format changes in seconds. Spring-mounted dispensing heads compensate for unevenness on product surfaces, ensuring that labels are applied cleanly. Control system Bluhm Weber standard controller Zebra ZE500-4 print module label printer Ideal for print and application labeling applications for products, cartons, outer packaging, and pallets in these areas: • Manufacturing and warehousing • Automotive industry • Pharmaceutical industry • Food and beverage production • Healthcare and beauty industry Standard features • Printing methods: thermal transfer or thermal direct • Orientation: right or left • All-metal industrial design • 16 MB SDRAM, 64 MB flash memory • Applicator interface • Transmissive and reflective media sensors • Multi-level Element Energy Equalizer™ (E3™) for high print quality Kdsdeibh Tkepfx Ap Dsu • Real-time clock • Rotatable display • ZPL II™ – universal language for Zebra printers Media characteristics Labels Media thickness (label and liner) • ZE500-4: 0.135 mm to 0.254 mm Media types • Continuous, die-cut, or with a reflective mark Ribbons Maximum roll size • 101.6 mm outer diameter with a 25.4 mm core inner diameter Standard length • 600 m capacity Connectivity • Parallel interface: Centronics® compatible • Serial interface: RS-232 • USB 2.0 • Internal ZebraNet™ 10/100 • Applicator interface with DB-15F connector • Optional ZebraNet b/g print server Fonts/Graphics/Symbologies Fonts and character sets • Zebra Global Printing Solution including Unicode™ • Swiss 721 font standard • Bitmap fonts A to H and GS symbols can be expanded tenfold, regardless of height and width • Infinitely scalable Font Ø (CG Triumvirate™ Bold Condensed) can be expanded point by point, regardless of height and width • International character set IBM® code page 850 • With UFST® from Agfa Monotype Corporation • Firmware support for downloadable TrueType™ fonts • Additional fonts available Graphic features • Supports custom fonts and graphics, including custom logos and barcode symbologies • Supports all standard 1D and 2D barcodes Barcode symbologies • Supports all standard 1D and 2D barcodes Technical data Maximum print width • 104 mm Media specifications • Width of labels and liners: 16 mm to 114 mm • Minimum length with rewind: 13 mm • Minimum length without rewind: 6.5 mm • Minimum length in stream mode: 6.5 mm • Maximum length: 990

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 20 h, Well-maintained and fully functional wide belt sander, manufactured in 2020. Manufacturer: Holzkraft Model: LBSM 3005 ESE Year: 2020 Working width: 300 cm. Kdedez S Ufbepfx Ap Dju Electric height adjustment. The wide belt sander is in perfect condition, both visually and technically, and has been used very little. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2081-9007, total height: 2,200 mm, total length: 1,462 mm, total width: 1,750 mm, workpiece weight (max.): 20 kg, type of input current: DC, overall weight: 3,300 kg, travel distance X-axis: 250 mm, travel distance Y-axis: 795 mm, travel distance Z-axis: 250 mm, input frequency: 50 Hz, input voltage: 230 V, workpiece length (max.): 700 mm, workpiece width (max.): 200 mm, workpiece height (max.): 700 mm, protection type (IP code): IP54, Equipment: documentation/manual, type plate available, Measuring machine with 4 NC-controlled axes, featuring non-contact measurement technology and an additional measuring probe for the automated measurement of micro-precision tools such as milling cutters, drills, step and profile tools. Extended measuring range, specifically for long tools up to 700 mm in length. Due to an additional backlight camera with 400x magnification, even the smallest tools, i.e., microwork tools, can be measured in terms of contour or profile. Thanks to the 400x magnification in both backlight and front light, microwork tools can also be measured using the backlight method. Backlight CCD matrix camera 1, magnification = 50x, diameter (up to 150 mm) and length measurements (up to 700 mm), angle measurements, and radii of the outer contour can be measured. Backlight CCD matrix camera 2, magnification = 400x, observation at the tool circumference, diameter, length, angle measurements, and radii of the outer contour of mini or microwork tools can be measured. Front light CCD matrix camera 3, magnification = 400x, observation of the side view, e.g., helix angle, chamfer width, chip space depth, chip, spiral, and relief angles. Front light CCD matrix camera 4, magnification = 400x, observation of the end face, axial, relief, and radial angles, chamfer widths, center distances. Tool holder SK 50. Software features, see PDF Software License. Kdjdpjzvdxaofx Ap Deu The machine is sold as a complete workstation with all existing accessories. Also available with a second

Condition: excellent (used), CATALOGUE NUMBER 8128 Kdsdpfx Aj Aac Eqop Dou Technical specifications: - Length of workpiece: 2600 mm - Width of workpiece: 800 mm - Main motor: 4 kW - Width of sanding belt: 170 mm - Fan - 2 speed settings + clockwise/counterclockwise rotation - Diameter of dust extraction port: 120 mm - Overall dimensions (L/W/H): 3650x1330x1500 mm - Weight: approximately 800 kg ADVANTAGES – Polish production – With fan – DTR documentation included – Unpainted – Used sander, very good condition Net price: 6200 PLN Net price: 1442 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 61,700 h, functionality: fully functional, machine/vehicle number: 7831, spindle motor power: 5,500 W, turning length: 231 mm, spindle speed (max.): 10,000 rpm, turning diameter: 25 mm, spindle bore: 25 mm, overall weight: 3,000 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, feed length Y-axis: 534 mm, feed length Z-axis: 230 mm, total width: 1,400 mm, total length: 2,400 mm, total height: 2,060 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, bar diameter (max.): 25 mm, quill travel distance: 230 mm, quill diameter: 25 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, input voltage: 400 V, power: 5.5 kW (7.48 HP), travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, travel distance Z-axis: 230 mm, operating pressure: 6 bar, Equipment: documentation/manual, rotational speed infinitely variable, Tornos Deco SIGMA 20s Swiss-type automatic lathe, including Robobar SBF-532 3000mm bar feeder, Mayfran Consep chip conveyor with drum filter (unique version), electrostatic oil mist collector, and an automatic CO₂ fire suppression system (Kraft & Bauer). Kdsdpfxeyrg Ahe Ap Dou Fitted with a Fanuc 31i-model A CNC control, spindle speeds up to 10,000 RPM on both the main and sub spindles. The machine features 6 axes and 22 tooling positions: Main spindle: 12 positions, 6 of which are driven (up to 6,000 RPM) Sub spindle: 10 positions, 6 of which are driven (up to 6,000 RPM) Also equipped with high-pressure coolant, up to 80 bar. The machine can be inspected under power. Dismantling and transport are the responsibility of the buyer. Parts included with the machine: • External holder left, long – 6× (417608) • External holder left, short – 1× (417606) • Single driven holder, reduced speed – 2× (417612) • Double clamping, long – 2× (417617) • Double clamping, short – 2× (417620) • Driven block – 2× (417624) Bushings for pusher diameters (216787): • Ø10 • Ø16 • Ø20 • Ø25 Ejector set: • Ø5 to Ø20 (in 1 mm increments)

Condition: good (used), Year of construction: 2014, Approx. 11 units of compact label dispensers for applying pre-printed labels, Weber, Alpha Compact – used: Price per unit, ex-works: now only €950.00 instead of €2,950.00 (net)! Manufacturer: Weber Type: Alpha Compact Year of manufacture: 2014 Ksdpoz Sdq Ujfx Ap Dodu Includes stand and applicator 100 – 240VAC Condition: good Available: from approx. Q4/2026 Location: Warehouse Frankenberg / Saxony

Condition: used, empty load weight: 5,710 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2017, suspension: air, load capacity: 36,290 kg, 20" 30" 40" 45" STORAGE BOX Kdjdpfo Aa U R Eox Ap Dsu MANUAL DRAWER EXTENDABLE FRONT AND REAR LIFTABLE FIRST AXLE

Condition: used, empty load weight: 13,950 kg, maximum load weight: 65,000 kg, axle configuration: > 3 axles, first registration: 06/2010, suspension: air, tire condition: 20 %, load capacity: 51,050 kg, • Extendable • First liftable axle • Self-steering last axle • Hydraulic outriggers • Hydraulic ramps • Winch • Convoy kit • Tie-down rings • Platform height: 93cm • Usable length: 9.75m • Extension: 4.50m Kedps Abafwofx Ap Dedu • Hydraulic widening system • Width: 2.50 to 3.10m • Rear inclined section: 2.00m • Gooseneck: 2.80m

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 18738, functionality: fully functional, operating hours: 600 h, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,800 mm, height adjustment type: electric, total height: 1,310 mm, total length: 1,510 mm, total width: 3,880 mm, overall weight: 750 kg, space requirement length: 3,880 mm, space requirement width: 2,352 mm, table length: 2,800 mm, table height adjustment: 220 mm, table width: 950 mm, Equipment: documentation/manual, Johannsen long belt sanders Type T 85/PNEUMA Year of construction 1990 Operating hours approx. 600 Machine data: Footprint total length 3880 mm Depth 1510 mm Height 1310 mm Space required Length 3880 mm Depth 2352 mm Table size 2800 x 950 mm Weight 750 KG Kdsdougvxxepfx Ap Dou Equipment: - Pneuma sanding unit - 4 sanding shoes - Lighting in the belt cover - Vacuum suction clamping device incl. vacuum pump - Belt blow-out nozzle - Pneumatic turntable - 2 belt speeds - Pneumatic belt tensioning - Electric table lift - Rack with approx. 100 sanding belts / belt dimensions 7800 x 150 mm Filter system: Base area 1600 x 960 mm Height 2850 mm 18 fine filters Machine is fully functional Condition very good

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total length: 690 mm, total width: 1,150 mm, total height: 1,670 mm, overall weight: 258 kg, conveyor belt width: 750 mm, Equipment: chassis, New machine with a 24-month warranty. Advantages: + Excellent price-performance ratio + Robust baguette long-roll machine + 3 polypropylene feed rollers with chain drive + With a secured feed hopper, the feed chute is covered + Additional protection to prevent interference with the rollers + With a safety switch on the feed hopper, which stops the machine immediately (see video!) + Conveyor belts made of felt + Simple, mechanical adjustment of long-roll characteristics + Fast spare parts supply within 1-2 working days SPECIAL accessories, optionally available at an extra cost: - Mobile frame: + EUR 400.00 net --- Painted frame with 2 storage compartments under the machine --- With 4 swivel casters, 2 of which have brakes - Guide for loaf bread: + EUR 500.00 net Technical data: - Long-roll width: max. 750 mm - Weight range: 50 - 1,200 g - Hourly output: approx. 1,200 pieces (depending on the dough) - Motor power: 0.55 kW Kdjdshyda Ijpfx Ap Dou - Connection values: 400 V - 3-phase - 50 Hz - 16A CEE plug - Dimensions: 115 x 69 x 167 cm (W x D x H) - Feed height: 144 cm - Machine height: approx. 75 cm (without frame) - Net weight: 258 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, Fanuc control system, Turning and milling lathe, Pick-up spindle, Kdedpfx Aoz Ryynep Deu Tool magazine.

Condition: excellent (used), functionality: fully functional, engine power: 2.2 kW table length: 290 cm table width: 80 cm electric table adjustment belt width: 150 mm Kedpfx Aezdyhmjp Dedu power supply: 380 V

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 30012, overall weight: 2,000 kg, total length: 6,600 mm, total width: 1,700 mm, Equipment: CE marking, documentation/manual, The long bending machine is exclusively used for bending and folding sheet metal (e.g., galvanized steel sheet, aluminum sheet, copper sheet, etc.) up to a thickness of max. 1.0 mm (according to the manufacturer). It is stable, reliable, and ideal for workshops or metalworking. Very good condition, ready for use. Technical data according to the manufacturer: - Machine type according to manufacturer: Long bending machine 6020/A - Year of manufacture: 2012 - Machine number: 30012 - Bending angle: approx. 140° - Weight: approx. 2000 kg - Dimensions: 6.60 m x 1.70 m - Electrical connection: Three-phase 230 V/400 V – 1.5 kW 230 V/400 V – 2.2 kW (AV) - Bending angle: 90° - 180° - Galvanized steel sheet up to 1.0 mm Kedpfx Apoz Akgwj Djdu - Aluminum sheet up to 1.5 mm - Smallest bend radius depending on sheet thickness and sheet type: 15 mm - Main switch, hydraulic unit, upper die, bending die, indicator light, control, safety stop, foot switch, emergency stop bar, stabilizers - Accessories: Hand shears I am available at any time for further information! - No guarantee, no warranty, no return or exchange. - Signs of wear, ready for use. - Sold as seen! - Payment: Cash upon collection/advance payment.

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, We are offering this used Johannsen wide belt sanding machine + additional sanding belt + dust collection container for sale. The machine nameplate is from the dust collection system, not from the sanding machine. Kdsdezzlvwspfx Ap Dsu Manufacturer: Johannsen Model: Wide belt sanding machine Year of manufacture: 1996 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1985, For sale is a used Langzauner LZK 3/2 wide belt grinding machine with a grinding belt length of 6200 mm. Kdodpez Anwmofx Ap Dju The machine is in good condition and has been inspected by our qualified technicians. Technical data: - Table size 2500 x 800 mm - Height adjustable - Grinding belt length 6800 mm - Dust extraction connection Ø 150 mm - Motor power 3 kW / 4.1 hp - Year of manufacture 1985 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: Grinding machine, wide belt, wide belt sander Reference: R-N0131

Condition: good (used), functionality: fully functional, mileage: 177,767 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, overall weight: 2,940 kg, empty load weight: 1,825 kg, maximum load weight: 1,115 kg, first registration: 05/2008, next inspection (TÜV): 10/2028, emission class: euro4, color: white, number of seats: 6, total length: 5,093 mm, total width: 1,906 mm, total height: 1,973 mm, fuel: diesel, number of gears: 6, machine/vehicle number: WDF63960313440540, Equipment: ABS, EBS, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, non-smoking vehicle, parking heater, power assisted steering, power mirror, seat heater, sliding door, soot filter, trailer coupling, truck registration, Workshop equipment - Sortimo 9147 Paint color Arctic White MB 9147 AC7 Axle ratio I = 3.273 BB3 Electronic Stability Program (ESP®) CL4 Multifunction steering wheel with trip computer E28 Additional battery for retrofitted accessories ED5 Parameterizable special module EE8 Battery 12V 100Ah EH3 Universal preparation for networked mobile phone EL8 Two-way front speakers EN4 COMAND with TMC interface ES1 12V socket in the passenger compartment ES6 AUX socket EZ8 PARKTRONIC F46 Headlight cleaning system F61 Interior mirror F66 Lockable glove compartment F68 Heated and electrically adjustable exterior mirrors FF2 Center console with 1-DIN slot FJ1 Folding cover for storage compartment FKA Box van FZ8 Comfort opening and closing with IR remote control Kjdpe Aba Hujfx Ap Djdu FZ9 Two additional main keys G40 Automatic transmission H00 Warm/cold air duct to the passenger compartment H12 Auxiliary hot water heater H16 Seat heating for driver H21 Heat-insulating glass all around with band filter on the windshield HF2 Pollen filter HH9 Semi-automatic Tempmatic climate control system HI1 Climate zone 1 (cold/comfort) HY1 Remote control for auxiliary hot water heater HZ0 Auxiliary heater, electric IL1 Domestic (Germany) IN2 Wheelbase 3200 mm, long overhang J65 Outside temperature display JA1 Warning light for windshield washer fluid level JA5 Light and rain sensor JK3 Instrument cluster with pixel matrix display KA1 Particulate filter L Left-hand drive L66 Load compartment lighting LB9 Exit lights LD0 Roof control unit with 2 reading lights M49 Generator 14V/180A MF4 Emission class Euro 4 N1 Gr.III/N2 MP3 Engine OM 646 DE 22 LA 110 kW (150 HP) 3800/min MS1 Cruise control Q22 Trailer coupling, fixed ball head QA4 Trailer load 2500 kg RD9 Tire specification, no specific brand required RF1 Tire brand Continental (10) RG1 Tire size 205/65 R16 RM1 M + S tires RR6 Spare wheel with jack RS3 Steel wheels 6.5 J x 16 SB1 Driver's seat, comfort SE5 Lumbar support for driver's seat SH4 Passenger double seat bench, comfort SZ4 Storage pockets on the backrests of the front individual seats T19 Sliding door, left T70 Child lock on doors in the passenger compartment U65 Seating in the passenger compartment, 3-seat bench, 1st row U73 Armrests for seating in the passenger compartment V30 Side wall interior paneling in the cargo/passenger compartment V43 Wooden floor V85 Smoker's package VD1 Headliner, standard, pillar C-D VT0 Fabric Mateo anthracite W16 Window, front left, fixed in side wall/sliding door W17 Window, front right, fixed in side wall/sliding door W65 Rear tailgate W70 Tinted glazing in the rear, black glass X30 Vehicle registration certificate part 2 XA2 Weight variant 2.940 kg Y10 First-aid kit Y44 Warning triangle YF7 Fire extinguisher 1 kg Z41 Approval as a truck ZC5 Sales designation 0 ZK4 Mixto

Condition: good (used), Year of construction: 2002, functionality: fully functional, Control system: Traub TX 8i Main spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Kdedpfjz Erdtex Ap Dju Counter spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Tooling system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front tool holder, 5-position, with Z3 slide, without drive Rear machining station (5 tools), without drive Bar loader: IEMCA BOSS 432/44

Condition: used, empty load weight: 5,600 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 12/2006, suspension: air, tire condition: 75 %, load capacity: 32,400 kg, • Pneumatic unlocking system • Electro-hydraulic power unit Kodpfj Abadgjx Ap Djdu • Sliding carriage • Drum brakes

Condition: used, empty load weight: 4,700 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/1999, total length: 12,460 mm, suspension: air, tire condition: 55 %, load capacity: 33,300 kg, • Length: 12.46 m • Drum brakes Kdodpfx Ae Abac Nop Dju

Condition: used, empty load weight: 4,500 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2009, total length: 12,530 mm, suspension: air, tire condition: 85 %, load capacity: 33,500 kg, • Manual rear extension Kjdpfx Ao Abadmep Djdu • Length: 12.53 m

Condition: used, empty load weight: 5,720 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 07/2019, suspension: air, tire condition: 30 %, load capacity: 36,280 kg, • Multi-position 20’, 30’, 40’, 45’ • Extendable front and rear • Pneumatic unlocking • Pneumatic rear sliding extension Kdodpfx Apj Aa U Ttj Dou • Storage box • Disc brakes • First axle liftable • Third axle self-steering

Condition: used, empty load weight: 5,800 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2018, suspension: air, tire condition: 45 %, load capacity: 32,200 kg, Multiple positions 1x20’, 2x20’, 40’, 45’ Last axle self-steering Pneumatic unlocking Kdsdpe Abaghofx Ap Dou Sliding carriage on hydraulic cylinder with electric power supply Extendable rear bumper WABCO Smartboard Disc brakes