Used Ball Bearings for sale (5,316)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Bitburg
7,719 km
Combined machines
Holzkraft SCMLAB 300 Plus F 16 Tersa
Call
Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds
for sawing, milling, planing/thicknessing, and optional mortising
torsion-resistant steel cast iron construction
machine table made of cast iron, hardened and ground
easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails
large fence system with extendable aluminum telescope fence and folding stops
with combination saw fence with 45° quick adjustment
max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45°
helical steel feed roller for consistent wood feed during thicknessing
four milling speeds, manually adjustable
Hnsdjcnxa Njpfx An Eow
standard with right/left rotation of the milling spindle
three independent motors for each working unit
Scope of delivery:
Combination fence/parallel fence
Arc milling guard
Tersa cutterhead
Anodized aluminum sliding table
Aluminum fence cheeks
Folding stops
Eccentric clamping arm
Model LAB 300 PLUS F 16 Tersa
Item No. 5500314
Technical data
---Technical data circular saw---
Fence length 1600 mm
max. saw blade diameter with scoring 315 mm
max. cutting height at 90° / 45° 100/79 mm
max. ripping width to the left of the saw blade 1660 mm
Cutting width on the parallel fence 800 mm
Saw arbor speed 3500 rpm
Saw blade inclination 90° - 45°
---Technical data planer---
Working width 300 mm
Planer table length 1260 mm
Cutterhead speed
Cutterhead diameter / number of planer knives 72 mm / 3 pcs
---Technical data thicknesser---
Table dimensions 300 x 450 mm
min. / max. working height 3 mm / 220 mm
max. chip removal 4 mm
Feed rate 7 m/min
---Technical data table saw---
Usable spindle length 100 mm
max. tool diameter 180 mm, can be recessed
max. tenon tool diameter 275 mm
max. tool diameter, can be recessed 140 mm
Spindle speed 3500/600/800 rpm
Spindle diameter 30 mm
Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40%
Weight 430 kg
Dust extraction port diameter 4 x 120 mm
Dust extraction port diameter saw blade guard 60 mm
Sliding table with ball bearing system
equipped with a proven ball bearing system
permanently easy-running thanks to hardened and ground guides
not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail
10-year HolzKraft warranty on wear of the carbide guide rails
Dust extraction hose connection
The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine.
Planing units
helical steel feed rollers for a constant and even wood feed
massive anti-kickback devices prevent the workpiece from kicking back
3-knife cutterhead ensures an optimal planing result
Success:
Your message has been sent.
Listing
Kassel
7,806 km
Fertilizer spreader
BögballeM45 plus
Call
Condition: used, Year of construction: 2022,
Success:
Your message has been sent.
Listing
Aalen
8,005 km
Frame press
S&ST 35
Call
Condition: new, Working width 3000 mm
Working height 2000 mm
Number of cylinders 5 St.
S&S Frame Press, Type T 35 – CE Version
-----
Working width: 3000 mm
Working height: 2000 mm
Manufacturer’s Technical Description:
Item 1
00001931 S&S FRAME PRESS, Type T 35
Item 2
00003701 Medium-pressure beam with double-acting pressure cylinder, weight
compensation, pressure hose, and shut-off valve, up to 2000 mm high
Sturdy welded frame construction made of thick-walled special hollow sections;
sliding carriage and pressure beam with 50 mm hole spacing.
Continuous abutment on the left side for wide-span compaction; lower abutment
in 2 levels.
Vertical press cylinders mounted on special pressure beams with one-hand quick
adjustment and weight compensation, height-adjustable in 50-mm hole spacing.
Long sliding carriages ensure the long-term absorption of high pressing forces.
Quick, smooth width adjustment via ball-bearing-mounted
carriage with central locking, secured in 50-mm hole spacing.
Upper horizontal press cylinder is infinitely height-adjustable and
equipped with weight compensation.
Lower horizontal press cylinder with centering holes for the
two abutment levels, without weight compensation.
Abutment and pressure plate depth: 100 mm
Pressure plate and support width: 130 mm.
Electro-hydraulically controlled machine, with 2 vertical pressure cylinders
d = 60 mm, stroke 120 mm, double-acting, with weight compensation and
one-hand quick adjustment, 2 horizontal pressure cylinders, d = 40 mm, stroke
120 mm, double-acting, with weight compensation; 2 manual control valves,
pressure gauge, 1 pressure regulating valve from 20 to 130 bar, corresponding
to 550 to 3,500 kg of vertical pressing force. Equipped with a 3 kW three-phase
motor for 400 volts, 50 Hz operating voltage.
Complete with electrical connection.
Hnodsd Ih H Nepfx An Eew
Painted in RAL 7035 light gray with RAL 7016 anthracite gray.
-----
Price of the above machine available upon request!
----- -----
Options:
Working widths from 3,000 mm to 5,000 mm
Working heights from 2,000 mm to 3,000 mm
Optional equipment including a beveling device,
counter profiles for single-part production, and much more!
Request the complete price list from us!
-----
(Technical data according to the manufacturer, subject to change; the
illustration may show optional equipment!)

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Success:
Your message has been sent.
Listing
Dortmund
7,679 km
CNC vertical machining center
FAMUP - EmcoMCP 100 Evolution
Call
Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer.
Table size: 2 x 1000 x 450 mm
Tool holder DIN 69871: ISO 40
Travel ranges:
X-axis: 1100 mm
Y-axis: 500 mm
Z-axis: 640 mm
Spindle speed range: 50 – 10,000 rpm
Table load: 600 kg
Feed rate range, X/Y/Z, stepless: -10,000 mm/min
Rapid traverse in all axes: 30 m/min
Drive power: 18.5 kW
Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm
Weight: approx. 6700 kg
Accessories / Special features:
• CNC control system SIEMENS 840 D
• Dual pallet changer
Hnodpfx Aed I R E Nen Esw
• 30-tool automatic tool changer
• Full enclosure with safety doors, electrically secured
• High spindle speed up to 10,000 rpm and drive power of 18.5 kW
• Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions
• Ball screws in all 3 axes
• The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping
• Tool holder DIN 69871, ISO 40
• Chip conveyor with integrated coolant system
• 4th axis pre-configured
• CE compliant
Siegfried Volz Werkzeugmaschinen
Rüschebrinkstr. 151-153
D - 44143 Dortmund - Wambel
Success:
Your message has been sent.
Listing
Wiefelstede
7,607 km
Encoder
BalluffBDG 6360-2-10-30-W126-2500-65
Call
Condition: used, Absolute encoder, encoder, rotary encoder, encoder, incremental encoder
-Manufacturer: Balluff, Incremental Encoder
-Type: BDG 6360-2-10-30-W126-2500-65
-Quantity: 2 encoders available
-Price: per piece
Hsdpfxjun Dwyo An Eonw
-Dimensions: 58/86/H70 mm
-Weight: 0.3kg
Discover more used machines
Success:
Your message has been sent.
Listing
St.Lorenz
8,258 km
Logging truck
MANTga 26.480 6x4H-2B Allrad Hydrodrive Bj 2008
Call
Condition: used, mileage: 1,054,044 km, power: 353 kW (479.95 HP), first registration: 02/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, emission class: euro4, loading space length: 5,650 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, Equipment: ABS, air conditioning, all wheel drive, * Man Tga 26.480 6x4H - 2BL Hydrodrive All-Wheel Drive 4x4
* Flatbed with tarpaulin and wooden side rails
* Air conditioning
* Manual transmission
* Auxiliary heater
* Detachable crane mounting
* 6-speed retarder
* 2 beds
* Electric windows
* Electrically adjustable mirrors
* Trailing axle / with articulated axle
* VIN: WMAH35ZZ38L050607
* Engine type: D2676LF05
* kW: 353
* Euro 4
* Displacement: 12419 ccm
* Tare weight: 14580 kg
* Payload: 11345 kg
* Gross vehicle weight: 26000 kg
* Wheelbase: 4500 / 1300 mm
* Internal body length: 5.65 m
* Internal length with tailgate open: 6.40 m
* Internal body width: 2.45 m
* Internal body height: 2.70 m
* Vehicle length: 9250 mm
* Vehicle width: 2550 mm
* Vehicle height: 4000 mm
Hsdpokq Ap Tofx An Ejnw
* Tires: 385 / 65 R 22.5
* Price (net)
Tel./WhatsApp:
Success:
Your message has been sent.
Listing
Babberich
7,577 km
Trimming & bearding machine
OMERAR 1600
Call
Year of construction: 2008, condition: good (used), Make: OMERA
Type: R 1600
Year: 2008
Specifications
Metric US Standard
Max. blank / workpiece over bed
1800
Dimensions (Estimate)
Length
2800 mm
Width
2000 mm
Height
2600 mm
Weight
4100 kg
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Share on
Downloads
Hjdpfxjkvnuus An Eenw
Max. blank / workpiece over bed:1800
Length: 2800mm
Width: 2000mm
Height: 2600mm
Weight: 4100kg
Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm
Max. blank / workpiece over bed:1800
Length: 110.236inch
Width: 78.74inch
Height: 102.362inch
Weight: 9043lbs
Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm
Table length 2500 mm
Table width 1450 mm
Spindle diameter 250 mm
Spindle Rpm 3 - 20 Gr/1Gr
Stroke pinole arm 400 mm
Column arm 250 mm
Troath arm 900
Height arm 1400 mm
Success:
Your message has been sent.
Listing
Leipzig
7,963 km
Deephole Drilling and Milling Machine
Emsil groupNarwhal
Call
Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil.
Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office.
Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings.
The machine is also equipped with a milling and boring bar which can handle exceptional power and torque.
The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings.
The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically
Hnsdpfx Aou Id H Aon Esw
Rotary Turntable:
The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones.
There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system.
CNC Axes Control:
The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc.
The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc.
You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm
*
Success:
Your message has been sent.
Listing
Brakel
7,761 km
BTS-MF40 Waste Baler, Cardboard, Foil
BTS-MF40 Ballenpresse Waste Baler
Call
Condition: new, Year of construction: 2026, functionality: fully functional, The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales.
By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle.
Pressing force: 2 Ton
Bale weight: up to 40 kg (material depending)
Bale size: 600 H (var.) x 535 W x 460 D mm
Hnjdpfx Anou Iwgvo Esw
Machine size: 1756 H x 718 W x 644 D mm
Machine weight: 187 kg
Transport height: 1756 mm
Loading aperture: 522 W x 490 H mm
Cycle times: 20 seconds
Motor: 1.5 kW 13 Amp
Power supply: 220 - 240 V (1 phase)
Noise level: 68 dB
User-friendly lever control
Bale trolley for easy bale removal
Retainers to prevent material spring back
Reel holder for 2 rolls of strapping
A quality product „Made in Europe“
Suitable for compacting
Cardboard
Plastic film and foils
Cans and light sheet metal containers
Canisters and light plastic containers
Clothes
Light valuable materials
Optional Extras
Machine colour RAL
Can crusher insert
AUTO compaction cycles
Strapping rolls
Power supply 380 - 400 V (3 phase)
Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor
Success:
Your message has been sent.
Listing
Goldenstedt
7,653 km
Cupboard with drawers
BEDRUNKA + HIRTH
Call
Condition: used, 9 St.
ca. 750 x710x1020 mm
weight 180 kg
Colour 6011 RAL
Large drawer usable space ...x... mm
Hnodoy A Tb Tepfx An Eew
Full extension drawer runners (VA) 100%
2 drawers with internal height 30 mm
2 drawers with internal height 55 mm,
2 drawers with internal height 80 mm,
2 drawers with internal height 130 mm
Ball bearing drawer runners
Individual pull-out stop
Individual locking possible for each drawer
TÜV GS tested
Drawers flush with cabinet, recessed handles
Success:
Your message has been sent.
Listing
Germany
7,824 km
Gildemeister TWIN 65
GildemeisterTWIN 65
Call
Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details.
- 2 units available, identical machine- Production Hours: 38,407 h- Data Interface: USB port available- Interpolation Software (TRACYL / TRANSMIT) installed and available- Configuration: Multi-slide turning center with Slide 1 (Top), Slide 2 (Bottom), and Slide 3 (Counter spindle)- Machine Design: 60° slant bed- Guideways: Roller guideways- Axis Play / Clearance: No known play in X, Y, Z axes or turret heads- Machining Tolerance Condition: Tight machining tolerances consistently maintained- Collision History: No collisions known- Service / Maintenance History: In use and maintained at Heidenhain until 2025; minimal use under current ownership (MBM)- Max Turning Diameter: 250 mm- Max Turning Diameter (Standard): 120 mm- Max Turning Length: 900 mm- X-Axis Travel: 300 mm- Z-Axis Travel: 650 mm- X1 Travel (Upper Slide): 300 mm- Z1 Travel (Upper Slide): 650 mm- Y1 Travel (Optional): ±40 mm- X2 Travel (Lower Slide): 180 mm- Z2 Travel (Lower Slide): 650 mm- X3 Travel (Counter Spindle): 175 mm- Z3 Travel (Counter Spindle): 670 mm- Rapid Traverse X/Z (Slide 1): 30 / 30 m/min- Rapid Traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min- Rapid Traverse X/Z (Slide 2): 30 / 30 m/min- Rapid Traverse X/Z (Counter Spindle Slide): 15 / 30 m/min- Feed Force X/Z (Slide 1): 4.0 / 7.0 kN- Feed Force X/Y/Z: 4.0 / 4.0 / 7.0 kN- Feed Force X/Z (Slide 2): 4.0 / 7.0 kN- Feed Force X/Z (Counter Spindle Slide): 4.0 / 7.0 kN- Positioning Resolution: 0.0005 mm- Motor Torque X/Z: 6 / 10.5 Nm- Motor Speed X/Z: 3000 rpm- Ball Screw Pitch X/Z: 20x32 / 20x40 mm (Slide 1 & Slide 2); 10x32 / 20x40 mm (Counter Spindle Slide)- Spindle Drive Type: AC motor with integrated spindle motor- Main Spindle Speed Range: up to 5000 rpm- Main Spindle Power (40/100% ED): 35 / 25 kW (26 kW rated)- Main Spindle Torque (40/100% ED): 370 / 270 Nm- Main Spindle Chuck Size: 175 / 200 mm- Spindle Bore Diameter: 79 mm- Spindle Nose Diameter: 170 mm- Collet Diameter: 66 mm- Front Bearing Diameter: 120 mm- Maximum Rod Diameter: 62 / 65 mm (without reducing tubes)- Main Spindle Clamping: 2-jaw chuck or Hainbuch clamping system (accessories)- C-Axis (Main Spindle): Integrated, 2000 rpm, Holding Torque: 270 Nm- Counter Spindle: Yes- Counter Spindle Speed: up to 5000 rpm- Counter Spindle Power (40/100% ED): 26 / 21 kW- Counter Spindle Torque (40/100% ED): 290 / 230 Nm- Counter Spindle Clamping: 2-jaw chuck or Hainbuch clamping system (accessories)- C-Axis (Counter Spindle): 2000 rpm, Holding Torque: 230 Nm- Total Tool Stations: 24 (2x 12-station turrets)- Tool Stations per Turret: 12- Tool Holder / Taper Size: VDI 30- Tool Shank Size (DIN 69880): 30 / 40 mm- Driven Tools: Yes (All stations capable)- Driven Tool Speed: up to 4000 rpm- Driven Tool Power (40/100% ED): 11.7 / 8.
Hnsdpfxsyvz Ibe An Esw
Success:
Your message has been sent.
Listing
Unstruttal
7,865 km
Dowel boring machine for staircase construction
GÖTZINGER/ HOFFMANNTyp RBS schwenkbar TOP ZUSTAND
Call
Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser
In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution.
It can be used to drill dowel holes and similar.
The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically.
The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used.
You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread.
The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed.
For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right.
The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch.
The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder.
380V, 2100W
2820 rpm
Year of manufacture: 2005
Weight: approx. 300 kg
With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints.
Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability.
The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine.
Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical.
The machine requires a compressed air connection of 6 bar (the air consumption is very low).
Right-hand rotation.
Mills and drills very well and cleanly.
The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately.
The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter.
The max. drilling hole depth is 190 mm with a stop and scale.
The max. workpiece height is 360 mm.
Everything functions perfectly.
Comes with a manual.
We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request.
Hedpjzgh Tvofx An Ejnw
Professional equipment, not hardware store junk.
You can start working with the machine immediately.
Very stable and durable construction.
The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw.
Success:
Your message has been sent.
Listing
Kirchberg
7,973 km
Panel van
MANTGE 3.180 4x4 SB Allradantrieb 4x4 Hochdach Höhe
Call
Condition: used, mileage: 5,923 km, power: 130 kW (176.75 HP), first registration: 07/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 07/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, All-season tires, LED lighting, rear step across half width, rear wing doors without window cutouts, right sliding door, multifunction steering wheel, double passenger bench seat, hill start assist, emergency braking, lane change and crosswind assist, rear view camera, ASR, DAB+, USB, MAN Media Van navigation, mobile phone interface, wooden flooring in cargo area with rear loading edge protection, C-rails on side walls, partition wall, lashing eyes.
Hnodpfxeyg Twzs An Esw
Success:
Your message has been sent.
Listing
Tatabánya
8,572 km
Paper baler waste compactor
HSM BallenpresseHL 40 10 LI (3404)
Call
Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM
Model: HL 4010 Li
Hodpfx Ansyhbxce Ejnw
Year of manufacture: 2015
Pressing force: 40 t
Success:
Your message has been sent.
Listing
Essen
7,650 km
Working platform semitrailer
ES-GE4-Achs-Ballastauflieger
Call
Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website.
Extract from the equipment list. Full specification available on request.
Chassis:
* Chassis frame construction with welded longitudinal beams and through-running cross members
* Rear underrun bar approximately 700 mm wide
* Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams
* Maximum cross member spacing 400 mm (for longitudinal floor installation)
* 3.5-inch kingpin according to SAE standard, replaceable
* Outer frame as UNP 200, open to the outside
Landing Gears:
* 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot
Axles:
* 4 x 10 t SAF axles with large drum brakes
* 22.5 single tires
* Axle spacing approx. 1,700/1,810/1,810 mm
* Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco
* Holder for lift and lower device, bolted design
Braking system:
* Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit)
* Mount for light and brake at the front underrun bar, total height approx. 700 mm
* Basic version tire pressure monitoring, connected to CAN bus system of the EBS
* With double-release valve for brake and spring brake actuator
* Test port for brake cylinder pressure on the front right brake cylinder
* 1 red and 1 yellow coupling head each
* Lift and lower device mounted at rear left in driving direction
* EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable!
Tyres:
* 8 x 445/65 R 22.5 – premium brand of our choice
* Centering rings
Lubrication:
* Grease nipple strips at the bogies and front steering, no central lubrication
Superstructure:
* Without body certificate according to DIN EN 12642 XL
* 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder
* Front wall for platform design, heavy duty
* Side outline marking yellow, rear yellow
* Front wall approx. 800 mm high, with metal cladding, bolted
Lighting:
* 2x LED work lights fitted in lamp panel, controlled by reverse gear
* 2x LED work lights, controlled by reverse gear, one each side near the landing gear
* 2x LED reversing lights, one each side in front of first axle
* Lighting/wiring system, brand of our choice
* Number plate illumination
* The towing vehicle must supply sufficient power for the selected lighting (especially reverse light)
* Position lights front, bottom, white, one each side (LED)
* 24 volt lighting system with large multifunction light
* Flashing side marker lights (LED)
* 1x 15-pin and 2x 7-pin connections at the front via multifunction box
* EBS socket
* 1 pair of lane marker lights (LED)
Floor:
* Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles
Paint/Coating (no metallic finishes):
* Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice
* Axle hubs in chassis color
* Axles and landing gear black
* Wheels in aluminum/silver similar to RAL 9006
* Wheel nuts untreated
* Underrun protection painted RAL 9010 pure white (aluminum)
Accessories:
* Lifting device for 1st axle
* 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN
* 12 RUD-SLP lashing points per side with
Hnodpfx Anewx Dcto Ejw
Success:
Your message has been sent.
Listing
Rosenberg
7,988 km
3 wrappers + 1 baler
Palettenwickler + Ballenpresse
Call
Year of construction: 2025, condition: used, Packaging machines, consisting of:
1x Rotary arm wrapper with top sheet applicator, type: B200E, manufacturer: TechnoWrapp
Hedpfx Aewk Dv Djn Ejnw
1x Ring wrapper, type: A800-4, manufacturer: TechnoWrapp
1x Rotary arm wrapper, type: CW 400E, manufacturer: CombiPack
1x Baler, type: BVP-950-HL1, manufacturer: Willems, Indion
Technical details, equipment, photos, and operating time are shown in the attached description.
Success:
Your message has been sent.
Listing
Kaufungen
7,815 km
Trailer
2 Achs Tandem Ballastanhänger BAL 218 L
Call
Condition: used, maximum load weight: 14,740 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2017, next inspection (TÜV): 11/2028, Year of construction: 2017, Internal vehicle number: G300411
Available immediately at our location in Kaufungen.
For more information, please contact:
* Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian)
* Viktoria Sologubova (Polish, Russian, Ukrainian, English)
Unladen weight: 3,260 kg
Subject to errors and omissions.
We will gladly accept your used vehicle as a trade-in.
Financing is available directly with us.
GOLEC NUTZFAHRZEUGE GMBH
Hjdpfx Aeykf Ugen Ejnw
We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.
Success:
Your message has been sent.
Listing
Lemgo
7,723 km
MAN TGX 33.520 6x4 BL FASSI F485RA.2.28
MANTGX 33.520 6x4 BL FASSI F485RA.2.28
Call
Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Adaptive cruise control
- Aluminum fuel tank
- Rear work lights
- Heated exterior mirrors
- Heated mirrors
- Co-driver seat
Hnsdpfsylxrzsx An Ejw
- DAB radio
- Differential lock
- Catalytic converter
- Automatic climate control
- Refrigerator
- LED lighting
- Air horn
- Particle filter
- PTO
- Radio/Multimedia system
- Rotating beacon
- Rear view camera
- Disc brakes
- Sunroof
- Sleeper cabin
- Seat heating
- Sun visor
- Lane keeping assist
- Stability control
- Auxiliary heater
- Automatic heating system
- Toolbox
- Windshield
Internal number for customer inquiries: Reference vehicle -> 3-150
MAN TGX 33.520 6x4 BLS with FASSI F485RA.2.28 xe-dynamic loading crane.
Loading crane and superstructure:
F 485RA.2.28 xe-dynamic
Endless slewing range
All hydraulic cylinders are double-acting
Double-knee linkage system with PROLINK
FASSI stability control FSC including LMB II
Radio remote control, Fassi V7S Radio maxi-6 linear outriggers and color display
FL system (Full Lift) switchable quick-gear valve for the outriggers
Max. outreach 20.95 m with 1,325 kg lifting capacity (optional extendable to 24.95 m)
Electronic overload protection with FX900
Danfoss D850 control valve
Work lights
Control system for additional function »Winch / xe-dynamic
PAVIC semi-trailer crane superstructure in compact design
Ball joint bearing on the superstructure to allow separate use of a ballast box (ballast box 3600 x 2480 x 800 mm, approx. €14,500 net)
Vehicle: MAN TGX 33.520 6x4 BL SZM
Technically permissible total weight 73,000 kg
Engine D2676LF78 - 520 hp EURO 6e - 2650 Nm C -R OBD-D
MAN TipMatic 12.28 OD, with Retarder 35
Driving program MAN TipMatic Performance, up to 70,000 kg
Extension of driving program MAN TipMatic, 70,000 kg to 90,000 kg, heavy transport
Driving program MAN TipMatic Offroad, up to 70,000 kg
Rear axle Hypoid HYD-1370/HY-1350
Differential lock in rear axles
Fuel tank 370l right and 60l AdBlue
Drive 6x4
Wheelbase 3300+1350 mm
Suspension Leaf/Air
ECAS air suspension system
Rear frame overhang 750 mm
Trailer coupling ROCKINGER 400G150A
Trailer coupling for pulling a semi-trailer (factory conversion)
Fifth wheel coupling JOST JSK 37 C, mounting height 185 mm with integrated lubrication
Fifth wheel distance 1125 mm
Fifth wheel plate 40 mm, manufacturer JOST (fifth wheel load up to 36t)
Cab GM: the spacious one (wide, long, medium height)
Glass sunroof, electric
Control panel MAN EasyControl, 2 functions, can be operated from the outside when the door is open
Driver comfort seat, air-suspended with lumbar support, shoulder adjustment and heating
2 sleeping berths
Cool box under sleeping berth, fully retractable
Storage compartment on the rear wall of the cab with swan-neck light and control module
MAN Media System Navigation Professional 12.3 inches
Infotainment control MAN SmartSelect with touchpad and direct selection buttons
Smartphone integration
Lane departure warning system LDW
Digital axle load display (ALM) in the cab for air-suspended axles
and more.
Financing / leasing, as well as...
Success:
Your message has been sent.
Listing
Burbach
7,762 km
EDM machine
OPS IngersollGANTRY EAGLE 500 Generalüberholt
Call
Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and visual condition.
The machine has undergone a comprehensive and professional overhaul in our workshop and is in very good condition both technically and visually.
During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional inspection were performed using a laser measuring system.
The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, were completely replaced.
In addition, the machine was completely repainted and now presents itself in a very well-maintained visual condition.
The generator and the control system were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation.
Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS Ingersoll.
The machine is immediately ready for operation and is ideally suited for reliable production.
Technical data:
Ingersoll (OPS Ingersoll)
Wire EDM machine
OPS INGERSOLL GANTRY EAGLE 500
Year of manufacture 2009
Control system
EAGLE Powertec PC/NC 2060
MultiProg Powertec technology programming on PC/NC
Powertec Easy Burn quick programming
Powertec Handheld - multifunctional handheld device
Manual erosion with Powertec Handheld
High Speed Jump max. 18 m/min
Generator power 60 Amperes, EAGLE Powertec
Travel ranges (X, Y, Z) 525 x 400 x 450 mm
Electrode changer 20-position pick-up disc changer
Working tank (W x D x H) 770 x 670 x 440 mm
Work table (W x D) 750 x 650 mm
Load capacity 1,000 kg
Accessories:
CO2 fire extinguishing system
Integrated cartridge filter system
Hnedpfx Ansyrqpfs Eew
Special equipment:
Linear measuring system in all axes (Z as standard)
09.11
Success:
Your message has been sent.
Listing
Aalen
8,005 km
Sanding machine
LoewerDSM 3000
Call
Condition: new, Number of sanding units 2 St.
sanding width 290 mm
Sanding height max. 180 mm
LÖWER-DoubleSander Solid DSM 3000
-----
Two-sided single wood sander for sanding
Solid wood such as window wood etc. Stable
Top version with long casting tables, brushing and finishing
device and conveyor belt feed. Suitable for high
Permanent load even with higher chip removals.
- Staggered sanding and finishing units at the top
and below
- directly driven rubberized sanding rollers for slip-proof
free power transmission
- Combined grinding via roller and shoe for high chip removal
with a flat intervention zone at the same time
- maintenance and wear-free CERMET-coated grinding wheels
shoes with very good thermal conductivity and absolute
Dimensional accuracy
- External cooling of the grinding zones for cooler grinding
and longer sanding belt service life
- force-guided pneumatically controlled sanding belt
oscillation
- effective sanding dust extraction directly on the
Grinding rollers
- Airborne dust extraction on the tension rollers
- Integrated brushing and finishing device with large
Grinding dust extraction
- motorized grinding thickness adjustment via precision
threaded spindles and large-sized linear ball screws
bearing sets on hardened and ground precision
shafts with dust and dirt protection
- Adjustment of the chip removal at the bottom via precision
Threaded spindle with dimension display via scale ring
(Resolution 0.1mm)
- Sanding belt tension via pneumatic cylinder
constant clamping pressure
- Sanding belt change with pneumatic belt relaxation
Within seconds
- Adjustment option for the sanding belt run
Band change
- electro-pneumatic compressed air monitoring
- Anti-running protection via contact roller if it is too thick
workpieces
- Workpiece transport via calibrated non-slip and non-stick
fixed conveyor belts over heavy, 1000mm long cast iron
tables with a finely planed surface and spring-loaded
Pressure rollers with fine adjustment
- Cardan shaft drive for smooth and consistent
Workpiece transport
- Feed gear motor infinitely variable
for quick adaptation to different types of wood
- all motors electrically protected
- Ergonomically arranged controls on the workpiece inlet side
- digital thickness display (resolution 0.1mm) with modern
Magnetic tape system
Technical data:
- Sanding belt speed 22 m/s
- Sanding belt length 1800mm
- Sanding belt width 300mm
- Working width 290mm
- Grinding thickness 2-180mm
- two brake motors for 7.5 kW drive
- Feed motor 1.0 kW
- Feed speed 4-20 m/min.
- automatic height adjustment 0.37 kW
- two brush units of 0.37 kW each
with fiber brushes D 120 x 300mm
- Suction nozzles 2 x 120mm and 2 x 150mm
- Pneumatic connection 6 bar
- Working height 850mm
Hodpoyrty Tjfx An Eenw
- Length 2105mm
- Length with control panel 2490mm
- Width 980mm
- Height 1910mm
- Weight approx. 1650 kg
- Operating voltage 400 volts, 50 Hz, 3P
- CE version
-----
Price of the above machine on request!
-----
Special accessories with additional costs:
Workpiece blow-off
- using nozzles from above and below at the machine outlet
arranged, pneumatically controlled
Sanding belt blowout
via nozzles directly on the radii of the tension rollers inside
the suction arranged, timer controlled on/off 5 seconds each,
can be switched on separately
Disc unit for defibering
- two gr...
Success:
Your message has been sent.
Listing
Eilenburg
7,973 km
Three-way tipper van
FORDRanger XLT 4WD 3-Seitenkipper WiPa Standhzg
Call
Condition: used, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,230 kg, color: white, gearing type: automatic, number of seats: 4, total length: 5,570 mm, total width: 1,995 mm, total height: 1,860 mm, loading space length: 2,030 mm, loading space width: 1,840 mm, loading space height: 350 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal Number: 4030.TZ26.SK21231
----
Errors and prior sale excepted!
Conversion to 3-way tipper
* Subframe and tipping frame made of steel lightweight profiles, completely hot-dip galvanized
* Aluminum sideboards, silver anodized
* Sideboards can be folded down and locked with long-stroke latches
* Rear sideboard can be folded down
* 4 ball bearing tipping supports with Durenthan shell, 2 galvanized locking pins
* 20mm thick rubber pads between subframe and tipping frame
* Hydraulic cylinder drive via an electro-hydraulic unit, operable from the cab
* Multi-stage telescopic cylinder with nitrided pistons
* Underrun protection with lighting
SPECIAL EQUIPMENT
* Trailer hitch - 13-pole - for 3.5 t trailer load - 90° rear tailgate opening angle - height of the ball head approx. 50 cm (center)
* Load compartment protection liner "sprayed", 12-volt connection on the platform
* Package: Outdoor Package 2 - Engine and tank protection, steel - 100% rear locking differential
* Package: Winter 1 - Leather steering wheel, heated - Front seats, heated
* Auxiliary heater, programmable, with remote control
ADDITIONAL EQUIPMENT
* ABS
* Towing hook, front
* All-wheel drive, switchable
* Trailer hitch preparation set
* Audio system 44: Ford SYNC 4A
* Exterior mirrors, electrically adjustable, heated, with indicator
* Exterior mirror housing in vehicle color
* Battery management system
* Headliner made of woven fabric, light
* Roof console, illuminated
* Diesel particulate filter with SCR
* Tachometer
* Third brake light
* ESP (Electronic Stability Program)
* Power windows, front
* High beam assistant
* Ford Easy Fuel
* FordPass Connect including eCall and WLAN hotspot
* Heated windshield
* Floor mats: carpet floor mats, front
* Transmission: 6-speed automatic
* Grille insert on the fender
* Glove compartment with lid
Hnjdpfx Aneymicaj Esw
* Easy Lift tailgate
* Tailgate handle, black
* Rear window, heated
* Interior mirror, automatically dimming
* Dashboard, digital 8
* Air conditioning, front
* Headrests (2)
* Radiator grille
* Paint: solid paint
* Load securing system with protective frame
* Steering wheel: Multifunction steering wheel
* Steering wheel: Vinyl steering wheel
* Center console, front, with integrated armrest
* Engine cover
* Fog lights
* Package: Rear seat 18
* Package: Safety Package 2
* Package: Seat 36
* Package: Technology Package 19
* Upholstery: Fabric
* Pre-Collision Assist
* Wheel Package 9: Alloy wheels 7.5J x 17, 255/70 R17
* Wheel arch trim
* Tire pressure monitoring system
* Windshield wipers with rain sensor
* Mud flaps, rear
* Side sill protection
* Selective driving mode switch
* Power steering
* Start-Stop system
* Socket: 12-volt connection in the rear
* Rear bumper, painted in vehicle color
* Front bumper, painted in vehicle color
* Tachograph, digital - Preparation
* Daytime running lights
* Door handles, painted in vehicle color
* Traffic sign recognition system
* Lashing eyes, external
* Lashing eyes, internal
* Immobilizer
* Central locking with remote control
...and more
----
1st owner. German version. Errors and prior sale excepted. 2-year factory warranty from registration (can be extended on request). We will gladly take your vehicle in part exchange. Financing/leasing is also possible without a down payment! Do you have any further questions? We will be happy to advise
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Remscheid
7,683 km
Component
BalluffBTL7-E100-M0100-B-S32 Positionsmesssystem BTL06YL -!-
Call
Condition: new, Balluff BTL7-E100-M0100-B-S32 Magnetostrictive Position Measuring System BTL06YL, unused, 100% functional, scope of delivery as per photos.
Hjdpfjy Rci Aex An Eenw
Success:
Your message has been sent.
Listing
Haldensleben
7,852 km
Edge banding machine
HEBROCKF2 Next
Call
Condition: new, Year of construction: 2025, HEBROCK Edge Bander F2 next
with SPS control system (incl. touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: pre-milling unit (incl. DIA tool)
up to 2 mm milling depth, maintenance-free glue pot with
preparation for interchangeable tank incl. glue discharge device, HF cross-cut saw station
(approx. 12,000 rpm), HF milling station (approx. 12,000 rpm)
with separate pneumatic milling adjustment and indexable insert cutter head
(combi version), robust chain drive, double roller upper pressure with ball bearings,
inspection window on the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min.
Hodpfx Ajwmdbrjn Ejnw
Including:
F2/500/10 Whispercut pre-milling head
F2/500/20 Combination milling head
F2/500/2 Radius cutter R=2mm
F2/12 Surface scraper (incl. pneumatic lift)
Success:
Your message has been sent.
Listing
Siedlce
8,431 km
Universal Conventional Lathe
CORMAK560X2000 C6256
Call
Condition: new, Year of construction: 2026, CORMAK 560 × 2000 Universal Conventional Lathe
The CORMAK 560 × 2000 is a heavy-duty universal metal lathe designed for professional applications in machine shops, toolrooms, maintenance departments, and industrial manufacturing facilities. Its robust cast iron construction, large turning capacity, and 103 mm spindle bore enable efficient machining of a wide variety of workpieces.
Key Features
Electromagnetic foot brake ensures maximum operator safety and minimizes downtime by providing rapid, reliable machine stopping.
Hardened and precision-ground bed offers excellent rigidity and long-term resistance to wear and deformation.
Heavy-duty cast iron machine frame absorbs vibration and improves machining accuracy.
Rapid longitudinal and cross feeds increase machining efficiency and reduce cycle times.
Precision spindle supported by high-quality ball bearings ensures smooth operation and extended service life.
103 mm spindle bore allows machining of long and large-diameter workpieces.
3-axis Digital Readout (DRO) provides precise positioning and improves machining accuracy.
Construction and Technology
The CORMAK 560 × 2000 has been engineered for intensive industrial machining. Its 350 mm wide induction-hardened bed and precision-machined slideways provide outstanding rigidity and repeatability. The machine features an ergonomic control panel, a clearly arranged spindle speed and thread selection chart, and a rapid traverse system that increases operator productivity.
The headstock is equipped with a Camlock D1-8 spindle nose, allowing fast, accurate, and secure chuck mounting while maintaining excellent spindle rigidity.
Machining Capabilities
The machine is capable of performing a wide range of machining operations, including:
Rough and finish turning
Metric, imperial, module, and DP thread cutting
Drilling and boring
Taper turning
Facing operations
With a 560 mm swing over the bed and an impressive 785 mm swing over the gap, the CORMAK 560 × 2000 is particularly well suited for machining large and heavy workpieces while maintaining excellent dimensional accuracy and surface finish.
Technical Specifications
Distance Between Centres 2,000 mm
Centre Height 280 mm
Swing Over Bed 560 mm
Swing Over Gap 785 mm
Swing Over Cross Slide 355 mm
Bed Width 350 mm
Spindle Bore 103 mm
Spindle Nose Camlock D1-8
Spindle Speeds 12 speeds, 25–1,600 rpm
Maximum Tool Size 25 × 25 mm
Longitudinal Feed Range 35 feeds, 0.059–1.64 mm/rev
Cross Feed Range 35 feeds, 0.020–0.573 mm/rev
Metric Thread Range 47 pitches, 0.2–14 mm
Imperial Thread Range 60 pitches, 2–112 TPI
Module Thread Range 39 pitches, 0.1–7 Module
Diametral Pitch Thread Range 50 pitches, 4–112 DP
Tailstock Quill Diameter 75 mm
Tailstock Quill Travel 180 mm
Tailstock Taper MT5
Main Motor (S1/S6) 7.5 / 9.0 kW (10 HP)
Coolant Pump Motor 0.1 kW
Machine Dimensions 3340 × 1150 × 1460 mm
Weight 2,940 kg
Standard Equipment
315 mm 3-jaw self-centering chuck (PO3-315 / D8)
Hnjdszqzxmopfx An Ejw
350 mm 4-jaw independent chuck (K72-350 / D8)
Service tool kit
450 mm faceplate
Fixed steady rest (capacity up to Ø180 mm)
Travelling steady rest (capacity up to Ø120 mm)
Two dead centres
CE-compliant electromagnetic foot brake
Electromechanical spindle brake
Filled with Shell Tellus 46 hydraulic oil
Rapid traverse system
Coolant system
Halogen work light
Change gears
Chip tray
3-axis Digital Readout (DRO)
Success:
Your message has been sent.
Listing
Kusel
7,797 km
Ultrasonic sensor
BALLUFFBUSM12E0-PPXCR-020-S04G
Call
Condition: new, Ultrasonic sensor
BUSM12E0-PPXCR-020-S04G (BUS0005)
Hsdpezr T Icjfx An Eonw
BALLUFF
“Partially unpacked for photography – unused item from warehouse clearance.”
We make it easier for you to find: "ball bearings"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Ball Bearings (5,316)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
























































































































































































































