Used Band for sale (4,068)

Condition: used, Year of construction: 2001, functionality: fully functional, Sabi PSR 360/600 bandsaw, semi-automatic Sabi bandsaw, all carbide (WIDIA) blade guides and seals and scrapers of the saw's lift/lower cylinder have been replaced. Cutting capacities: max diameter 320mm, rectangle 600 x 300mm, at 45º: 375 x 300mm. Cutting speed 15 to 105 m/min, main motor 2.2kW, total power 2.5kW, estimated weight 1900kg. Machine with rotation function, in very good condition. Gbedjxf Tvmopfx Af Aor

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm saw band length 3200 - 3400 mm table - swivable +/- 20 ° table surface area 600 x 600 mm table - tiltable +/- 45 ° total power requirement 1,7 kW Godpfx Afjxcp Sfe Aebr weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 Godpfx Afeylp A Ds Ajbr min/max. pitch cone length 200 - mm total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Godpfx Ajzpb Eqef Aebr

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Gbodpfx Afjwxmhlj Asr Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: new, The cutting angle can be continuously adjusted manually within a range of 90° to 45°. Highly precise material feed, even with multiple feed cycles when cutting longer workpieces. Individual feed length: 500 mm. High feed rate possible while maintaining maximum accuracy. The 7.5-inch color touchscreen enables simple and intuitive control of all machine functions. The control unit allows programming of up to 60 programs for quick adjustment of the feed length. The machine can be controlled fully automatically, semi-automatically, or manually. The standard equipment includes control of the feed pressure, a stationary clamping device, and the feed rate. A frequency converter enables continuous adjustment of the saw blade speed within a range of 15-90 m/min. Cutting range examples: 90° round: 260 mm 90° square: 245 mm 90° rectangle: 245 x 250 mm +45° round: 180 mm Gbodpfjztva Dox Af Ajr +45° square: 170 mm +45° rectangle: 180 x 120 mm Including: Coolant system Pressure gauge for saw blade tension Mechanical saw brush Material slide

Condition: new, Robust band saw for steel and stainless steel. Double-bevel cuts, up to 60° to the right and up to 45° to the left. 2 speeds: 35 and 70 m/min. Manual lifting of the saw frame, assisted by tension springs. Downward movement is achieved by gravity, dampened by an oil damper with an adjustable throttle valve. Cutting capacity examples: Round: 90°: 235 mm -45°: 165 mm +45°: 185 mm +60°: 115 mm Rectangular: 90°: 280 x 180 mm Gjdpsztu R Iofx Af Ajbr -45°: 185 x 80 mm +45°: 185 x 100 mm +60°: 115 x 80 mm With: Cooling system Vise with quick-release mechanism Mechanical material stop Manometer for saw blade tension Mechanical saw brush - Also available in the ARG 260 Plus version (cutting capacity for round stock: 260 mm) – available from stock!

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment Gedsztpw Njpfx Af Asbr - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Gjdpfxoznh Nme Af Asbr Cutting capacity, square: 230 mm Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Saw blade speed, infinitely adjustable Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Gbjdjztl Scepfx Af Asr Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 915 kg, Worktable dimensions 3465x710mm, height 875mm Gluing thickness roller edges 0.4 - 3mm Glue-on thickness strip edges up to 5mm, min - max. workpiece thickness 8-50mm min. Workpiece length/width with roller edges 190/110mm min. Length of panel 120mm Feed speed 9 m/min Feed motor 0.55 kW Working air pressure of pneumatics 6.5 bar Suction hood glue container 80mm 2 suction hoods Flush trimming unit 60mm 2 extraction hoods Pre-milling unit 80mm Working temperature 20-190C° Equipment: Pre-milling unit (jointing) Rounding unit (corner copying) Gluing unit, applying and pressing on the edge (self-lubricating glue pot) Trimming unit, for cutting off 90° of the protruding edge at the front and rear Flush trimming unit (joining) Scraper unit Buffing unit Surface scraper Gbsdjuacqzjpfx Af Aer Automatic application of the strip edges with edge magazine Kit for quick change of the glue container Device for heating the panel edge Non-stick agent spraying unit Spraying unit for finishing the edge

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) Gbsdpfx Afoy Au Hqs Asr • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Gbodpfsw Tfw Hjx Af Aer Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: good (used), Year of construction: 1995, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 32 A, cutting height (max.): 900 mm, cutting width (max.): 900 mm, Equipment: documentation/manual, lighting, motor brake, This sawmill includes: 2x clamping devices 4x vertical stops 4x leveling devices with clamps 4x log lifting arms 1x pre-cutter 1x log roller with drive 1x saw blade lubrication system 1x water lubrication system 1x electric positioning control Basic cutting length: 9.0 m Log passage: approx. 90 cm Godpfx Afjzk Exdj Asbr Hydraulic pump: 14 liters Motor power: 11 kW Saw blade width: 100 mm The saw was used as a secondary source of income, with approximately 500 cubic meters of timber cut per year. The friction wheel drive has been replaced with a hydraulic feed system, and the hydraulic pump has also been replaced. It has a tilting cabin and a handle heater for the fingers, which is supplied with warm hydraulic oil. The cast iron rollers were replaced about two years ago, and approximately 800 cubic meters of timber have been cut with them. Two saw bed extensions are included, one 3.0 m and one 2.0 m, for a total cutting length of 14.0 m. The saw motor was re-conditioned last year. An additional 18.5 kW electric motor is included, but has not yet been installed. Approximately 15 saw blades for hardwood and softwood are included, some of which are new. The machine runs very well, all components are fully functional, and there are no leaks in the hydraulic system. The saw can be inspected while in operation. For sale due to the purchase of a new machine.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, -KASTOTwin AE 4 CNC automatic bandsaw -Cutting diameter: 400 mm -Overall dimensions: 400x400 -Single feed: 900 mm, multiple feed: x999 -Saw blade: 5009x34x1.1 (3 additional blades included, value approx. 1,000) -Automatic chip collector -Coolant pump -Documentation -Original, very robust and certified roller tables: 1 receiving table, 200 cm, and 1 feeding table, 400 cm, for a total of 600 cm of roller tables -Machine is in good working order and ready for operation; can be viewed in Głosków, near Warsaw Gedezp Dpxopfx Af Ajbr -Machine serviced until the end of 2025 -We can assist with transport arrangements -Weight: 2200 kg -Net price

Condition: like new (used), - machine in stock - after a technical review - very good condition - ideal for the production of chairs Godpfxsd Dc E As Af Aebr   TECHNICAL PARAMETERS: - 7.5 kW main engine - two dugouts - pneumatic derrick control - pneumatic digging - wheel diameter 850 mm - 40 mm tape width - maximum length of the element 1300 mm - maximum width of the element 800 mm - maximum height 120 mm - two pneumatic side clamps - two pneumatic working distances - continuous feed regulation - hydraulic feed - 1.85 kW pump motor - receiving conveyor 180 mm x 2000 mm - 0.25 kW belt conveyor - central lubrication   Machine dimensions: - length 400 cm - 230 cm wide - height 250 cm - weight ~ 2000 kg

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 880 mm, control type: manual, actuation type: electric, total height: 2,700 mm, total length: 1,800 mm, total width: 1,250 mm, overall weight: 720 kg, table height: 980 mm, Equipment: CE marking, motor brake, – Made in Italy – Year of manufacture: 2019 TECHNICAL SPECIFICATIONS: – Wheel diameter: 900 mm – Max cutting height: 540 mm – Max cutting width: 880 mm – Table height from the floor: 980 mm – Table dimensions: 1170 x 800 mm – Max/min blade length: 6300 / 6100 mm – Max blade width: 50 x 0.8 mm – Motor power: 11 kW – Feed motor power: 0.37 kW – Feed with pneumatic clamping – 10 feed speed settings: 1 - 25 m/min Gbjdezim Nnepfx Af Aor – Roller guide for the feed – Table adjustable for angle: 0° - 20° – Outlet: 2 x Ø 120 mm – Machine dimensions (L / W / H): 1800 x 1250 x 2700 mm – Weight: ~720 kg

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 800 mm, Equipment: CE marking, – DTR technical documentation in Polish TECHNICAL PARAMETERS: – flywheel diameter: 815 mm – max. cutting height: 500 mm Gbodpfx Afjyuf Tqe Aer – max. cutting width: 800 mm – table dimensions: 1030 x 600 mm – table tilt: 0° – 20° – blade dimensions: 5643 x 38 x 0.65 mm – blade speed: 20 m/s – motor power S1: 4.5 kW – large tilting cast iron table – high-quality steel construction – precise bandsaw guidance system above and below the table – rubber-coated wheels for extended bandsaw blade life – overall dimensions (L/W/H): 122 / 77 / 254 cm – weight (net/gross): 680 / 770 kg

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 580 mm, Equipment: CE marking, documentation/manual, – CE certificate Gbodpoy El U Dsfx Af Aer – Operating manual – Italian production – Year of manufacture: 2006 TECHNICAL PARAMETERS: – Diameter of guide wheels: Ø 600 mm – Cutting height: max. 360 mm – Cutting width: max. 580 mm – Table dimensions (L/W): 800 x 585 mm – Saw table tilt: 0° - 20° – Minimum blade/bandsaw length: 4480 mm – Minimum blade/bandsaw width: 10 mm – Maximum blade/bandsaw length: 4580 mm – Maximum blade/bandsaw width: 35 mm – Flywheel speed: 715 rpm – Motor power: 2.2 kW / 400 V / 50 Hz – Extraction port diameter: 100 mm – Machine dimensions (L/W/H): 1120 / 800 / 2200 mm – Weight: ~300 kg

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: Gbodpfsy Na Hvsx Af Asr – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 400 mm, Offer for automatic bandsaw SBA 361: P-CNC-FORTE-SBA361 Dear Ladies and Gentlemen, Gbedjt I Emvopfx Af Aor We are pleased to be able to offer you our high-quality FORTE SBA 361 automatic band saw from 2002. The machine is in used condition. Technical data - Maximum workpiece diameter: 400mm - Feed roller conveyor - Automatic with bar feed - Space requirement approx. (height/length/width): 270 cm / 500 cm / 300 cm Price net 26.000 € VHB

Condition: used, Used ERHARD+SPIESS vertical band saw model HK 3C with combined filing device. Throat: 300mm with Ideal band welding device. Saw blade/band length approx. 2,800mm, width 3-10mm Gbjdpfxowkuytj Af Aor Throughput 200mm Cutting speed 9-800m/min, adjustable in steps Drive 1,400 / 2,800 rpm Table angle adjustment: right/left 15° each, forward/backward 10° each Filing machine stroke approx. 0-120mm, workpiece thickness max. 80mm, strokes/minute 75-300 Including 5 file holders with 5 different file shapes Delivery time: from stock. The machine can be inspected by appointment in 713334 Waiblingen Beinstein.

Condition: ready for operation (used), Year of construction: 2026, Optimum 275 N demonstration machine Gbjdjztcydjpfx Af Aor Model: Opti S 275 N Technical data: Cutting range 0 degrees, round: diameter 225 mm Cutting range 0 degrees: 245 x 180 mm / rectangle Cutting range 45 degrees, round: diameter 160 mm Cutting range 45 degrees: 160 x 160 mm / rectangle Cutting range 60 degrees, round: diameter 100 mm Cutting range 60 degrees: 100 x 100 mm / rectangle Saw bow lifting: manual Feed: steplessly adjustable Errors and omissions excepted.

Condition: used, Kronen GS 10-6 Band Slicer The Kronen GS 10-6 band slicer is a highly versatile machine designed for a wide range of food processing applications. It is a multifunctional slicer suitable for vegetables, fruit, meat, and cheese. Thanks to its extensive range of interchangeable cutting knives, the machine can produce slices, strips, and cubes. It can also be used to prepare pulled meat using the specially designed pulled meat knife. This slicer is ideal for processing salads, leafy vegetables, fruit, herbs, meat, fish, sausages, bread, cheese, nuts, and many other products. It is perfectly suited for use in commercial kitchens, catering companies, fresh produce businesses, and industrial food processing facilities. The easy-to-use control panel allows for quick product changeovers. Both the conveyor belt speed and the knife speed are continuously adjustable via frequency control, enabling precise processing of both firm and delicate products. The machine is entirely constructed from high-quality stainless steel, ensuring durability and compliance with food industry hygiene standards. Specifications: - Production capacity: 1,500 kg/hour (depending on product and cutting size) - Working width: 125 mm - Cutting size: 1–45 mm - Cutting options: slices, strips, cubes, grated products, and pulled meat - Supplied with: 2-blade knife - Product infeed height: 880 mm - Product discharge height: 580 mm - Voltage: 230 V (1 + N, 50 Hz) - Power: 1.8 kW - Year of manufacture: 2006 Gsdpfx Aozrf N Sof Ajbr - Weight: 250 kg - Machine dimensions (W × D × H): 1,500 × 640 × 1,360 mm

Condition: used, Year of construction: 2008, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: AC, We offer this used KALTENBACH KBS 1010 DG bandsaw, manufactured in 2008. Type: KBS 1010 Serial number: 304027 Year of manufacture: 2008 Operating voltage: 400 V Gsdpsztxwrjfx Af Aebr Operating voltage frequency: 50 Hz Control voltage: 24 V DC Valve voltage: 24 V DC Total rated current: 25 A Main fuse: 35 A If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.