Used Bandsaw Mill for sale (10,155)

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 75 - 3200 U/min 500 mm 230 mm table surface area 720 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • Dcsdpfx Acjfv H Hujpjn • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm Dcedpfxsfg E Hps Acpsn table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available) Dedpfx Acefg E H Ispscn

Condition: new, cutting diameter 300 mm Dcsdpfx Acofg E H Tepon saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: used, Year of construction: 2002, x-travel 600 mm y-travel 400 mm z-travel 400 mm table-size 800 x 400 mm spindle taper ISO Sk 40 spindle turning speed range 10 - 3150 U/min total power requirement 12,0 kVA weight of the machine ca. 2,2 t dimensions 2,0 x 1,85 x 1,95 m CNC Universal Milling Machine - Heidenhain TNC 310 with handwheel - Hydraulic tool clamp - Central lubrication Dcsdpfxey N D Idj Acpjn - Coolant system - Machine light - Machine feet - Enclosure

Condition: new, capacity 90 degrees: round 105 mm capacity 90 degrees: square 100 mm 100 x 105 dimensions of saw-band 1335 x 13 x 0,65 mm dimensions 650 x 310 x 300 m band speed 30 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg Action Price!! Berg & Schmid - assembly band saw PBS 90 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60° Dcedpfx Aefv Aq Rjcpjn Share of freight costs: EUR 25.

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Dcsdpfx Aofg E H Njcpon Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Dcedpfofg E H Sox Acpjn Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Dcsdpfx Asfg E Ibscpon Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support Dodpfefd Abaex Acpjcn - Automatic cooling Figure is semi-automatic.

Condition: new, cutting diameter 240 mm dimensions of saw-band 2730 x 27 x 0,9 mm table height 920 mm cutting speed 35 + 70 m/min 240 mm stroke back stop 230 mm cross-slide 270x230 210 Impact energy 200 Air consume per blow 200x210 130 mm 130 mm 130x160 mm total power requirement 1,2 kW weight of the machine ca. 0,26 t dimensions of the machine ca. 0,9 x 1,6 x 1,74 m • miter left 60° • Quick-release vise with quick-release device a. • Quick release lever for easy handling • Frame and gear made from one piece, very quiet cut and very low vibration • Electrical monitoring of band tension and band breakage, saw band cover. • Carbide saw band guide Dcjdpfx Aced Iip Sspen • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw frame lowering via the hydraulic Cylinder, continuously adjustable feed, with limit switch at the end of the cut. Rapid lowering of the saw frame from the rest position to the workpiece, then toggle to normal saw feed (e.g. for scribing). Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for notching). Through the brake cylinder the saw can be positioned in any position during the return stroke.

Condition: good (used), Year of construction: 2001, Boring/milling machine MECOF Performa, serial no. 05 01 06, year of manufacture 2001, HEIDEHAIN TNC 430M control, X/Y/Z 2,000/1,200/1,000 mm, table 2,200x1,150 mm, universal milling head TBA4, dust extraction, coolant system, control cabinets, filter systems. Dodpfx Ajz Icfmocpocn

Condition: excellent (used), Diameter Ø 700 x 25 mm Dcodpfx Acswz Nbmepon Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mount DIN 69871 ISO 50 Overhang 358 mm Max. speed range 3000 rpm Max. drive power 22 kW Mounting flange: Outer diameter Ø 306 mm Dimensions L x W x H 460 x 306 x 360 mm Weight approx. 150 kg Accessories / Special features: • 2 pivoting axis system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling and panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 2 weeks after order receipt Dodpfxez Adz Is Acpscn The following work will be carried out during the partial overhaul: - 1 new gear pair - 1 new gear shaft - New bearings for the milling spindle and the gear shafts - New seals for the milling spindle and hydraulic tool clamping - New paint job The image is similar and shows a milling head that has already been overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, Year of construction: 1981, Technical details: x-travel: 400 mm y-travel: 420 mm z-travel: 380 mm table surface area: 710 x 400 mm max. table load: 120 kg range of revolution per miute: 45 - 2240 / 18 step U/min feed continuous: 6,3 - 600 / 2 steples mm/min quill stroke vertical: 100 mm Dsdpfsu Nc Hkex Acpecn quill stroke: horizontal: 100 mm spindle taper: vertical/horizontal: SK 40/SK40 spindle head swivable left - right: 90 ° distance table/horizontal spindle: min./max.: 200 / 325 mm distance table/vertical head: min./max.: 150 / 730 mm total power requirement: 5,5 kW weight of the machine ca.: 1,95 kg machine dimensions LxWxH: 1,7 x 1,4 x 1,9 m dimensions electric cabinet: 850x500x1500 mm The milling machine is equipped with a 3-measuring path display. incl. machine feet and operating instructions *

Condition: used, Technical details: travel -y axis: Schlitten auf Balken: 200 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 90° ° quill stroke: 80 mm turning speed range: 90 - 900 / 5 step U/min distance table - lower edge spindle: min./max.: 50 / 400 mm table surface area: Anbaufläche:760 x 200 mm table surface area: Spannfläche: 630 x 200 mm max. table load: 100 kg x-travel: Tisch längs: 320 mm z-travel: Tisch vertical 350 mm table swivelabel +/-: re/li je 30° distance table - lower edge spindle: min./max.: 50 / 400 mm feed:: Tisch: stufenlos 14 - 71 mm/min total power requirement: 4,0 kW weight approx.: 1.200 kg dimension machine xH: 1,3 x 1,5 x 1,8 m Equipped with Heidenhain DRO for X and Y travel Swiveling work spindle The feed works via variator gear. The table is swivelable. Spindle speeds operate in 3 levels via gears and in 2 levels electrically. Cooling device diverse tool holders SK40 Der Fräsbalken ist um ca. 350mm ausfahrbar. Dcedpfxju Ndb Aj Acpjn The machine vise is not included in the delivery scope (see picture), but can be purchased additional! *

Condition: new, capacity 90 degrees: round 172 mm capacity 90 degrees: square 170 mm 170 x 170 dimensions of saw-band 2035 x 20 x 0,9 mm dimensions 430 x 960 x 520 m band speed 30 - 80 m/min total power requirement 1,5 kW weight of the machine ca. 38 kg SPECIAL PRICE!! Berg & Schmid - Assembly band saw PBS 171 ESC Powerful and particularly robust metal band saw Aluminum die-cast saw table and infinitely variable cutting speed for Miter cuts up to 60° Djdsfgyhzjpfx Acpscn Optional: machine base type 20508

Condition: new, cutting diameter 220 mm saw band length 2450 x 27 x 0,9 mm table height 915 mm band speed 35 + 70 m/min connected load frequency 400 V capacity 90 degrees: round 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm total power requirement 1,2 kW weight of the machine ca. 240 kg dimensions of the machine ca. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position Dsdpfofgyh Nex Acpscn stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm Dodpfofgyh Tsx Acpecn band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 Dcedpfjfgyicsx Acpjn saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 700 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t Dedpfx Acjupw Uzjpscn dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 Dcodeupxcyopfx Acpjn spindle diameter 47 mm spindle turning speed range 320 - 3300 U/min 230 mm 100 mm table surface area 420 x 155 mm connected load frequency 230 V 900 x 600 x 300 cm total power requirement 0,75 kW weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, capacity 90 degrees: round 125 mm Dcedpfx Aceupw R Njpsn capacity 90 degrees: square 125 mm 127 x 125 mm dimensions of saw-band 1435 x 12,7 x 0,65 mm band speed 38 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg dimensions 720 x 380 x 450 m Both straight and miter cuts can be made at angles between 45 and 90 degrees. With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute. With a weight of only 25 kilograms, the saw can be used mobile.

Condition: used, Year of construction: 1998, capacity 90 degrees: round 250 mm capacity 90 degrees: square 240 mm saw band length 2965 x 27 x 0,9 mm table height mm band speed 37 / 76 m/min total power requirement 1,0 kW Dcjdpfsu Sbpvjx Acpen weight of the machine ca. 0,38 t dimensions of the machine ca. 1,0 x 1,6 x 1,4 m double miter band saw

Condition: new, bore capacity in steel (diameter) 45 mm quill stroke 125 mm 560 mm 230 mm Dcsdpfjupxrnex Acpon table surface area 800 x 240 mm spindle turning speed range 75 - 3200 U/min max. milling cutter diameter 80 mm spindle taper ISO 30 max. distance between table and spindle-nose 460 mm throat 230 mm connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 580 Kg dimensions of the machine ca. 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.