Battery strapping tool buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4

Strapping tool TECNA 9357

Solingen, GermanyGermany dealership location
6408 km
2016
used
weight max. in kg 18 kg Fhkbpri2g more
1
We offer you, a used strapping machine by the manufacturer of Signode. Type: E2000 with foot control, documentation and schematic. During the test the engine 4 has performed umreifungen without any problems, then it has not more properly retracted the band. Will be a setting. Ncvud Main switch knob needs to be replaced, it turns out. Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserved, ... more
1
used blind rivet setting tool GESIPA Akkubird Gylzjylgm with battery and charger (both new and unused) more
2
consisting of: 1-part tensioning and sealing apparatus sealing sleeves strap 16 mm wide trolley for coil diameter max. 600 mm - 150 mm wide width / depth / height = 600/400 / 1,040 mm 40 kg Xozhtn2pk more
6

strapping tool A.V.M van den Berg GmbH HSW-S 20

Rietberg-Mastholte, GermanyGermany dealership location
6469 km
2001
used
technically and visually very good machine. Is power and can be tested at any time in the normal. Xfqp9wetu more
2

Steel strapping Handtool Cyklop OR-H 21A

Dabergotz, GermanyGermany dealership location
6679 km
used
Freleedw Steel strapping Handtool Pneumatic tensioning and closing for straight-surfaced packages. more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Glyb937dw AMERICAN TOOL INC. 2516-24F3 32" x 120” Engine Lathe Specifications: -- Swing over bed ways 33-1/2". -- Swing over carriage wings 24”. -- Swing over cross slide 24". -- Distance between centers 120". -- Number of spindle speeds 27. -- Spindle speeds 12 - 800 rpm. -- Length on bed 32-5/8”. -- Spindle hole 2-1/2". -- Headstock center #5. -- Radial load at 100 rpm front bearings 27,800 lbs. -- Spindle mount l2. -- Sp... more
1

4 Axis CNC Lathe with driven tools Okuma LU 15 MW

More Okuma Lu 15
Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1996
good (used)
Itfydxd Standard turning diameter 150 mm. Maximum swing 530 mm. Maximum spindle bore for bar work 52 mm. Spindle speed 45 – 4.500 Rpm. Number of tools on turret 12. Tool type VDI 40. CNC control OSP 7000 L. With 4 Axis, driven tools and sub spindle more
5
Bending tool, die, bottom blade, lower, Prism tool, beading tool Xicuoxex Tool for bending machine Split tool Tool is Tool intermediate dimensions 1430 mm Transport dimensions 1550/200/H235 mm Weight 250 kg more
5

Universal Tool and Cutter Grinding Masch Michael Deckel S 22 E

Emsteker Straße 127, 49661 Cloppenburg, DEGermany
6401 km
2004
reconditioned (used)
Universal Tool and Cutter Grinding Maschine (CNC controlled) Made By Deckel, model S 22 E, serial Nr. 43/2004, Year 2004 Description: Suitable to regrind and manufacture wood and metal working tools of all kinds. Specifications: X-axis traverse 400 mm, Y-axis traverse 310 mm, Z-axis traverse 305 mm, C-axis rotational range from +20° to -224°, A-axis speed 500 rpm, workpiece mount ISO 50, max. Workpiece diameter approx. 250 mm, max. Workpiece length approx. 900 mm, max. grinding length... more


battery st...
daily

New machines via email!

Stay updated!
5
x-travel:400 mm y-travel:200 mm z-travel:400 mm tool taper:SK 40 Table dimensions:700 x 330 mm speeds:40 - 2000 U/min rapid traverse in x-y-z axis:1,2 m/min. quill stroke:60 mm feeds:8 - 400 mm/U total power requirement:2,2 kW weight of the machine ca.:1,1 t Nclll dimensions of the machine ca.:1,3 x 1,2 x 1,7 m more
5

Toolholder HANKOOK SK 50

St. Ingbert, GermanyGermany dealership location
6503 km
used
tool taper:SK 50 Yac3zkwfd weight: t tool clamping area: mm more
1
Elect./Voltage: 39lyxkhx SUPERMAX MAX 8 VERTICAL MACHINING CENTER -- Table Size: 67" x 25" -- Spindle Nose to Table Top: 7.87" - 35.43" -- X Axis Travel: 64.96" -- Y Axis Travel: 27.56" -- Z Axis Travel: 27.56" -- Rapid Traverse Rate(X & Y): 590 IPM -- Rapid Traverse Rate (Z): 472 IPM -- Cutting Feed Rate: 196 IPM -- Spindle Speeds: 4,000 RPM -- Spindle Taper: CAT 40 -- Spindle Motor: 15 HP -- Tool Changer Capacity: 30 Stations -- Max Tool Weight: 22 lbs. -- Approx. M... more
5
Maximum turning diameter 300 mm. Maximum swing 525 mm. Maximum spindle bore for bar work 65 mm. Spindle speed 35-4.000 Rpm. Number of tools on turret 16/16 . Tool type Mazak VDI. CNC control Mazatrol Fusion 640 T Ndqzz more
5
Bending tool, die, bottom blade, lower Prism tool Tool for bending machine -Prismen 90 ° 20 mm -Prismen 30° 15 mm Split tool Tool dimensions 30 x 90 mm Hipc239lo Tool length 2415 mm Transport dimensions 910/100/H90 mm Weight 70 kg more
2
Description: Suitable for automatic grinding and production of wood and metalworking tools of all kinds. Specifications: X axis lateral movement 380 mm, Y Axis cross movement 280 mm, Z axis vertical movement 280 mm, C axis swing area 340°, A axis rotation 360°, centre height 210 mm, workpiece mount ISO 50, Max. grinding wheel diameter 200 mm, Grinding spindle rating 7.5 kW, Grinding spindle speed stepless 0 - 9000 U / min., connected load 29 kW (400 V / 50 Hz), dimensions W x D x H 1590 x 1... more
5
x-travel:300 mm Bbase2a83b y-travel:220 mm z-travel:400 mm control:Contour 3 tool taper:SK 40 Table dimensions:630 x 330 mm speeds:31,5 - 3150 U/min rapid traverse:4,0 m/min quill stroke:65 mm dimensions of the machine ca.:1,8 x 1,5 x 2,2 m total power requirement: kW weight of the machine ca.:1300 kg more
2

Toolcupboard Schließfachschränke

St. Ingbert, GermanyGermany dealership location
6503 km
used
length:900 mm width: mm height:1850 mm depth:500 mm Ba302o29xy more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 33pmk0gb SUPERMAX TOOLS SUPERBRUSH 36X2 Dual Head Brush Sander;SUPERBRUSH applications include, but are not limited to: White wood sanding, de-nibbing, sealer, and primer sanding applications, as well as UV roughing and reclamation projects. De-burring, graining, and polishing of steel, stainless steel polishing and aluminum finishing and solid surface materials. These sanderr are well suited to shutter sanding, de-glossing and [...]: -- 36" Sanding width,... more
2

Toolcupboard UNBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
length:1000 mm width:800 mm height:1050 mm Weight:150 kg Btdiztunc more
5
Bending tool, die, bottom blade, lower Prism tool Tool for bending machine -Prismen 90 ° 22 mm -Prismen 90 ° 10 mm Crt7xodm Split tool Tool dimensions 32 x 90 mm Tool length 3250 mm Transport dimensions 1620/65/H90 mm Weight 90 kg more
5
Driveways X: 400 mm Y: 350 mm, Z: 350 Table size 700 x 400 mm Spindle inner taper SK 40 Pinolverschiebung 80 mm Spindle speed 45-2240 RPM 18 steps Motor output 5.5 kW X2pjnpib0 Connection value 380 v, 50 Hz -infinitely variable feed rates with express speed overlay -equipped with a fixed angle table -Spindle brake -Coolant system in the machine foot -Cabinet opposite -Tool cabinet filled see photo Dimensions L x W x H 1600 x 1600 x 1830 mm Weight 1.8 ton. RUHLA factory service av... more
2
x-travel 600 mm y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm Mci32qwe feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t dimensions 2,7 x 2,5 x 2,0 m Acc.: NC-dividing unit (=4t... more
4

Tool and Cutter Grinder STANKOIMPORT 3B642

Leipzig, GermanyGermany dealership location
6734 km
1974
used
grinding length: 450 mm grinding diameter: 200 mm workpiece height: 220 mm spindle speed max.: 6300 U/min grinding wheel diameter: 200 mm grinding head vertical adjustable: 220 mm grinding spindle - swivable: 306 ° table surface area: 240x1000 mm table adjustment: schräg 7° re/li ° table travel longitudinal: 450 mm table travel cross: 260 mm total power requirement: 1,14 kW weight of the machine ca.: ca. 1,5 t space requirements of the machine approx.: T:1,5xB:1,6xH:1,5 m transport measurements ... more
4
Dialog 12 CNC control electronical hand wheel Technische Daten / technical details: X-Achse / X-travel 500 mm Y-Achse / Y-travel 400 mm Z-Achse / Z-travel 400 mm Drehzahlbereich / spindle speed 32-5000 UpM Vorschubbereich X/Y/Z / feed range X/Y/Z 2-6000 mm/min. Eilgang / rapid feed 6 m/min. Werkzeugaufnahme / spindle taper SK 40 Bccv3azexi Antriebsleitung Spindel 100%ED / drive capacity spindle 100%ED 7,5 kW Gewicht der Maschine ca. / weight 2.700 kg Technische Daten, Zubehör und... more
5

Toolcupboard UNBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
length:720 mm 3wvjcunu7 width:720 mm height:1000 mm Weight:150 kg more
5
Bending tool, die, bottom blade, lower Prism tool Tool for bending machine Qlpms70ml -Prismen 90 ° / 12 mm -Prismen 90 ° 10 mm Tool not shared Tool dimensions 30 x 90 mm Tool length 2000 mm Rail length 2500 mm Weight 83 kg more
4
x-travel 300 mm y-travel 300 mm z-travel 400 mm toolpiece draw-in hydraulic with bolts hydraulic weight of the machine ca. 1,4 t dimensions of the machine ca. m turning speed range 31,5 - 6300 U/min feed speeds 2 - 3600 mm/min rapid traverse 4 m/min tool taper SK-40 power requirement 2 kW control Grundig Dialog-4 Mechanic: good Optical condition: very good The machine can be viewed under current. 2801-1413 S 380 V, 50 Hz with CEE plug connector and cable colour: green Bbummq07qg ac... more
6
x-travel 600 mm y-travel 450 mm z-travel 500 mm table-size 795 x 495 mm spindle taper ISO 40 turning speed range 20 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid motion -longitudinal/cross/vertical 4 m/min stroke of quill vertical 80 mm Uqwfdtzx0 control PHILIPS CNC 432 total power requirement 14 kW weight of the machine ca. 2,8 t dimension L - W - H 2,50 x 2,10 x 1,90 m acc.: vertical head with hydr. tool clamping, solid table more
5
-NEW- Make Ganner Gannomat Type SELEKTA 253 220 V, 1 pH, 50 Hz in standard version with: -fully automatic electronic control with program selector Flushing adhesives GLUES/driving -Anchors drawer via electronic vibration conveyor with potentiometer to the continuous adjustment of the anchor support performance -Automatic Duebelldurchmesser and dowel length control with Auto-DL select System (automatic ejection of incorrect dowel lengths +/-5 mm in the Auffangbehaelnis) -Closed system ... more
3
tool adaptor SK 50 diameter of tools max. 0 mm turning speeds 0 U/min adjustment range: Grad Yqnvp8 These are various tool holders SK 50 DIN 69871 They can be put together individually. Prices 40% of new price. The following pictures are available: 1 pincer 2-16 (410E) 70mm; 9 pcs. Pliers 2-16 (410E) 100 mm; 2 pincers 2.5-25 (462E) 100mm; 10 pcs pliers 2,5-25 (462E) 70mm; 3 pincers 2.5-25 (462E) 120 mm; 4 pcs. Pliers ER16 (426E) 100 mm; 3 pincers ER16 (426E) 160mm; 1 St. Weldorn 6 - 63mm; ... more
2

Toolcupboard UNBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
length:750 mm width:750 mm height:1050 mm V98fykzb Weight:150 kg more
5
Bending tool, die, upper blade, upper tool, walk tool Delivery as is as seen partial damage Tool for bending machine Tool RADIUS mm dimensions 45 x 202 mm Yqmjlo Length 3150 mm Weight 158 kg more
3
workpiece length: 000 mm work height max.: 1000 mm revolution per minute: 1500 / 3000 U/min total power requirement: 1,5 kW weight of the machine approx.: 250 kg space requirements of the machine approx.: L:1,2xB:1,0xH:1,8 m Steel grinding Machine with 3 Stations for pre grinding and finishing of turning steel and inserts application: for pre-and finishing grinding of turning steels and inserts version: -with 3 stations Yz97voi supporting table Station 1+2 sideways, stepless tiltable, 530x140mm... more
5
x-travel 390/400 mm y-travel 210/220 mm z-travel 390/400 mm turning speeds 25-2500 U/min feed 8-400 mm/min rapid traverse 1500 mm/min quill stroke 100 mm tool taper Sk 40 x S 20 x 2 drive motor 2,0/3,0 kW total power requirement kW weight of the machine ca. 1,2 t E2c9pu8da dimensions of the machine ca. m Mechanic: very good Optical condition: very good The machine can be viewed under current. 2202 11509 / AG 380 V, 50 Hz, with CEE plug and cable colour: green Technical and optical ... more
6
chamfer lenght 480 - 4045 mm Ysfxwan9 Various tooling: 1: 65 x 65 x 4045 mm (hardly used), dimensions see sketch, price = 940, - 2: 118 x 65 x 3055 mm, dimensions see sketch, price = 550, - 4: 90 x 90 x 515 mm, dimensions see sketch, price = 150, - 5: 65 x 65 x 480 mm & 65 x 65 x 665 mm, dimensions see sketch, price =300,- Prices excl. VAT Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
1
length mm width mm 9rsl7sfkg height 1050 mm Tool closet incl. small material for Deckel Milling machines. more
2

Toolcupboard UNBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
length:720 mm width:780 mm height:1050 mm Weight:150 kg Fn08mq9 more
4
Bending tool, die, bottom blade, lower, lower beam, Tool for bending machines Cf3oc9gq -Verbreiterung for lower beam Dimensions 59 x 19 mm Length 1452 mm Weight 10 kg more
5

Tool and Cutter Grinder BECKMANN nicht bekannt

Leipzig, GermanyGermany dealership location
6734 km
1960
used
voltage: 220/380 V current: 4,1/2,3 A height over floor: 1300 mm table - swiveable: 360 Grad table adjustment - upside direction: 130 mm Table dimensions: L:560xB:150 mm throat: Tisch/tabel=150-400 mm total power requirement: ca. 1,0 kW S8wfaqqtd weight of the machine approx.: 252 kg space requirements of the machine approx.: L:0,9xB:0,8xH:1,45 m table travel: x-axis (longitudinal) =480mm y-axis (transverse)=250mm z-axis(vertical)=150mm incl. accessories [...] more
4
Maximum turning diameter 300 mm. Maximum swing 525 mm. Maximum spindle bore for bar work 51 mm. Spindle speed 35-5.000 Rpm. Number of tools on turret 16/16 . Tool type Mazak VDI. Lznqcv9n CNC control Mazatrol Fusion 640 T. more
6
chamfer lenght 480 - 4045 mm S3glttgl 4 pieces of unused upper tools: tool No 5 length: 3050 mm, dimensions see sketch, price = 710,- tool Nr 6 Length: 3073 mm, dimensions see sketch, price = 970,- tool No 9 L = 1925 mm divided, dimensions see sketch, price = 850,- tool Nr.10 length: 1520 mm, dimensions see sketch, price = 850,- Prices excl. VAT Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
9
Milling machine Schaublin 13 Travels XYZ: 320-175-375 Spindeltaper: Iso30- Spindelspeeds: 58-2000 Tablesize: 600x210mm With angle table 2 Axes powerfeeds and rapids Bcauyrnbqz Angle head with quil Iso 30 Coolantsystem Very nice condition more
2

Toolcupboard UNBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
length:1000 mm 33g8yusbd width:800 mm height:1050 mm weight:150 kg more
4
Tool Cabinet, steel Cabinet 2 doors -Multiple shelves Dimensions 500/940/H1140 mm Weight 60 kg Hislfyqom more
6
Electro-hydraulic pre-Assembly and flaring tool PARKER EOMAT 2 for hydraulic hoses Fcrm3jxda YEAR 1999 Feed x 8.3 mm / sec 1,1 kW / 4,3 A / 400 v more
3
tool adaptor 30 mm diameter of tools max. 16 mm turning speeds 3000 - 6000 U/min coolant über Spritzdüsen F9v09kd new drive adapter 04.8140.3330.1 sutable for CNC lathes TRAUB TNS30/42D. ID nr. 5928/06 more
6
chamfer lenght 3050 - 4020 mm 4 pieces of unused upper tools: tool No 1 Length: 3700 mm, dimensions see sketch, price = 940,- tool No 2 length: 4020 mm, dimensions see sketch, price = 880,- tool No 3 length: 3055 mm, dimensions see sketch, price = 750,- tool No 4 length: 3050 mm, dimensions see sketch, price = 750,- Prices excl. VAT Fem0ixm0m Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
1

TRUMPF MultiTool 4-/6-fach, gebraucht + überholt

Leonberg-Höfingen, GermanyGermany dealership location
6647 km
used
Bbyqfryvcm kurzfristig more
3

Toolholder UNBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
tool taper:50 Cyn07h7x tool clamping area: mm weight:0,04 t 18 arbors partly with cutters ISO 50 more


battery st...
daily

New machines via email!

Stay updated!

to

to

Edit search
BATTERY STRAPPING TOOL
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close