Used Book Back for sale (4,066)

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet Nlodpfx Aju Rni Hoi Aoh *

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m further features: -with shear angle adjustment -operation via foot switch -voltage 380 V Nledpfxeu Icpps Ai Ajh *

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop Nsdpsu Icp Aofx Ai Aelh - back gauge with linear scale, operation with hand crank i.D. *

Condition: good (used), Year of construction: 2007, total width: 8,000 mm, total length: 10,200 mm, total height: 5,600 mm, Arm horizontal travel X 6200 mm Arm vertical travel Y 1925 mm   Nlodpfx Aoz Rwruei Aoh Surface grinding and polishing head Seam Weld grinding head Seam weld back Gouging Edge preparation   Dished ends Head cones Vessels Shells Pipes   KS 1200 head combi wheel and belt grinding smalles ID internal 1450 mm Power 18.5 kW Disc 650 mm with 8-20 mm thicknes Contact wheel 300 mm belt size 100 x 2800 mm   Head is swivable - 20 to + 30 Degrees Large tooling package with spare disc and wheels Very little used Length:10200mm Width:8000mm Height:5600mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2021, 2021 | Demarec DCC-30-C | Used Hydraulic Shear 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 37000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: A nice concrete crushing shear for 20-35 ton excavators. Jaw opening is 1,150mm. It has an Oilquick OQ80 quickcoupler. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41126 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Nljdpfx Aozlrqvsi Aoh

Year of construction: 2006, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Nedpfx Aeh U Awnji Aolh We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Hosokawa Alpine compactor CS 25. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Suitable to process many different products for industries such as minerals, chemicals, etc. Material of construction - product contacting parts: stainless steel - non product contacting parts: mild steel Non ATEX - Non Pressure Shock Resistant (NPSR) Scope: Compactor, with 11kW motor for compactor rolls and 4kW for the feeding screw, switch cabinet

Year of construction: 2003, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Turboplex ATP 200 air classifier for the perfect end product particle design. Our air classifiers allow you to split the product into two fractions, a fine and a coarse one, when a regular sieve can´t achieve this task due to product fineness or other characteristics. This is handy when you need to dedust the product removing the undesired fine dust or ensure a certain top cut separating the oversize coarse material, allowing you to adjust your product´s particle side distribution (PSD) to the required specification. This unit is suitable to process many different products for all kind of industries, like minerals, chemicals, etc. Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Without wear protection Nljdpfx Aieic Nq Hs Ash Non pressure shock resistant (NPSR) Scope: Hosokawa Alpine bare Turboplex ATP 200 air classifier with one single classifier wheel and 5,5kW motor

Condition: refurbished (used), Year of construction: 1999, Fully refurbished Hosokawa Alpine Pharmapaktor APC L200/30 used standalone system by Alpine Originals. Technical details: Construction materials: Non product contacted parts: stainless steel Product contacted parts: stainless steel Non pressure shock resistant (NPSR) Non ATEX (can be implemented for an additional price) Without vacuum deaeration (can be implemented for an additional price) Scope of supply: Hosokawa Alpine Pharmapaktor APC L 200/30, including feeding, without Flake Crusher. The Hosokawa Alpine APC L200/30 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end product sizes and forms, from different sort of briquettes to granulates according to the required specification. Thanks to its flexibility, the machine can be adapted to different products and tasks. It even complies with the tough pharmaceutical standards. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit Nedpfx Aiovq Nlxs Aelh The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: used, mileage: 106,329 km, power: 110 kW (149.56 HP), first registration: 08/2022, fuel type: diesel, empty load weight: 2,210 kg, maximum load weight: 905 kg, overall weight: 3,190 kg, wheelbase: 3,250 mm, next inspection (TÜV): 10/2028, fuel: diesel, energy efficiency: F, CO₂ emissions: 262 g/km, fuel consumption (combined): 10 l/100km, color: blue, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 5,580 mm, total width: 2,350 mm, total height: 2,320 mm, Year of construction: 2022, maximum speed: 149 km/h, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), power assisted steering, second-hand vehicle warranty, soot filter, trailer coupling, Exterior * Trailer hitch * Heated and electrically adjustable exterior mirrors * Roof rack behind the cab * Socket in the cab * Spare wheel Interior Nodpfx Aio Aa R U Hj Ajlh * Outside temperature display * Armrest for driver's seat * Adjustable passenger seat * Comfort driver's seat * Lumbar support for driver's seat Safety * Adaptive brake light * Driver airbag * Passenger airbag Comfort and Environment * Hill-start assist * ECO start-stop function * Headlight assistant * Gearshift indicator * Crosswind assist * Mercedes-Benz emergency call system * Multifunction steering wheel * Cruise control * Rain sensor Multimedia * Digital radio (DAB) with Bluetooth hands-free system Condition/Documents * COC documents Other * 230 V socket * 6-speed manual transmission ECO Gear * Engine compartment soundproofing * Storage compartment above the windshield * Storage compartment under the dashboard * Lockable AdBlue filler cap * Trailer load up to 3,450 KG possible * 13-pin trailer socket * Armrest for passenger seat * Upgradable to 3,450 KG permissible total weight / payload advantage 260 KG * Tachograph operation at the front under the headliner * Digital extra: Remote Services Plus * ECE version * Emission class Euro 6d * Suspension for comfort and cargo protection * Generator 14 V / 250 A * Weight variant 3,190 kg * Seatbelt warning system for passenger * Seatbelt warning system for driver's seat * Seatbelt warning system for rear seats * Semi-automatic TEMPMATIC climate control * Hydraulic jack * Clothes hook in the passenger compartment * Terminal block for electrical connection * Communication module (LTE) for digital services * Charging package for instrument panel * Steering wheel adjustable in tilt and height * MBUX multimedia system with 7-inch touchscreen * OM 654 DE 20 LA 110 kW (150 PS) 3800/min * Flatbed with aluminum side panels * Signs / printed materials in German * Driver's seat occupancy recognition * Steel blue * Jump start connection * Maintenance interval 60,000 km * Maturin fabric, black * First aid kit * Fleece battery 12 V 92 Ah * Preparation for intelligent tachograph EU * Warning triangle * Wet wiper system * Heated windscreen with band filter * Vehicle registration certificate, part II Other: * Nationwide delivery for 399 € net plus VAT (474.81 € incl. VAT). * For all vans: On request, 12 or 24 months of Mercedes-Benz used car warranty is possible. * We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing / financing via Mercedes-Benz Bank. We will be happy to prepare an offer for you. * No liability for printing and typographical errors * Errors and prior sale excepted

Condition: used, mileage: 106,329 km, power: 110 kW (149.56 HP), first registration: 08/2022, fuel type: diesel, empty load weight: 2,210 kg, maximum load weight: 905 kg, overall weight: 3,190 kg, wheelbase: 3,250 mm, next inspection (TÜV): 10/2028, fuel: diesel, energy efficiency: F, CO₂ emissions: 262 g/km, fuel consumption (combined): 10 l/100km, color: blue, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 5,580 mm, total width: 2,350 mm, total height: 2,320 mm, Year of construction: 2022, maximum speed: 149 km/h, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), power assisted steering, second-hand vehicle warranty, soot filter, trailer coupling, Exterior * Trailer coupling * Heated and electrically adjustable exterior mirrors * Roof rack behind the cab * Socket in the cab * Spare wheel Interior * Outside temperature display * Armrest for driver's seat * Adjustable passenger seat * Comfortable driver's seat * Lumbar support for driver's seat Safety * Adaptive brake light * Driver airbag * Passenger airbag Comfort and Environment * Hill-start assist * ECO start-stop function * Headlight assistant * Gear shift indicator * Crosswind assist * Mercedes-Benz emergency call system * Multifunction steering wheel * Cruise control * Rain sensor Multimedia * Digital radio (DAB) with Bluetooth hands-free system Condition/Documents * COC papers Other * 230 V socket * 6-speed manual transmission ECO Gear * Soundproofing in the engine compartment * Storage compartment above the windshield * Storage compartment under the dashboard * Lockable AdBlue filler cap * Towing capacity up to 3,450 kg possible * 13-pole trailer socket * Armrest for passenger seat * Can be uprated to 3,450 kg gross vehicle weight / payload advantage 260 kg * Tachograph operation at the front, under the headliner * Digital extra: Remote Services Plus * ECE version * Emissions class Euro 6d * Suspension for comfort and cargo protection * Generator 14 V / 250 A * Weight variant 3,190 kg * Seatbelt warning system for passenger * Seatbelt warning system for driver's seat * Seatbelt warning system for rear seats * Semi-automatic TEMPMATIC climate control system * Hydraulic jack * Coat hooks in the passenger compartment * Connection strip for electrical connection * Communication module (LTE) for digital services * Charging package for the instrument panel * Steering wheel adjustable in inclination and height * MBUX multimedia system with 7-inch touchscreen Nlodpfx Ae Aa R U Toi Ajh * OM 654 DE 20 LA 110 kW (150 hp) 3800/min * Platform with aluminum side panels * Signage/printed materials in German * Seat occupancy detection for driver's seat * Steel blue * Jump start connection * Maintenance interval 60,000 km * Fabric Maturin black * First-aid kit * Fleece battery 12 V 92 Ah * Preparation for intelligent tachograph EU * Warning triangle * Wet Wiper System * Heat-reflective glass with band filter on the windshield * Registration certificate, part II Other: * Nationwide delivery for 399 € net plus VAT (474.81 € incl. VAT)? * For all vans: On request, 12 or 24 months Mercedes-Benz used car warranty is possible. * We will gladly take back your current vehicle, offset it against the new vehicle or pay you the purchase price. * Leasing/financing via Mercedes-Benz Bank. We will gladly prepare an offer for you. * No liability for printing and typographical errors * Errors and prior sale reserved

Condition: excellent (used), Year of construction: 2011, operating hours: 32,000 h, operating speed: 9 mm/s, reverse speed: 90 mm/s, overall weight: 26,000 kg, pressing force: 400 t, table length: 4,100 mm, Equipment: CE marking, safety light barrier, High-Quality Used Bystronic XPERT 400x4100 CNC Hydraulic Press Brake For Sale Overview Available for immediate acquisition is a premium, Swiss-manufactured Bystronic XPERT 400x4100 CNC Hydraulic Press Brake. This down-stroke bending and folding machine is in exceptional condition, meticulously maintained, and fully prepared for heavy-duty precision fabrication. Key Technical Specifications: Manufacturer: Bystronic Model: XPERT 400X4100 Bending Capacity: 400 Ton Nljdozl D Efepfx Ai Ash Bed Length: 4100 mm (4.1 Metres) Total; 4 axis - 2 axis back gauge Configuration: Extended daylight and extended stroke for versatile, large-capacity component handling Condition and Maintenance: Status: Excellent operational condition ("Very Clean") and in full working order. Service History: This machine has been fully serviced directly by Bystronic UK, ensuring adherence to original manufacturer standards and peak performance reliability. Control System: Equipped with a modern, high-precision Swiss-made Bystronic MMC Control for streamlined programming and operation.

Condition: used, Year of construction: 2023, operating hours: 43 h, 2023 | Kramer 5050 | Used Wheel Loader | 43 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 41200 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 53 inspection points 50 approved ✅ 0 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Neuwertige Maschine.
Zum Zeitpunkt der Besichtigung befand sich die Maschine in betriebsbereitem Zustand. Bei der durchgeführten Funktionsprüfung konnten keine Auffälligkeiten festgestellt werden. Die angegebenen Transportmaße beziehen sich auf das Grundgerät ohne Anbauteile. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41488 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Njdoz S I Dwopfx Ai Aolh We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2026, operating hours: 8 h, 2026 | Kramer 5045 | Used Wheel Loader | 8 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 54700 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 51 inspection points 47 approved ✅ 0 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: New condition machine. At the time of the inspection, the machine was in operational condition. No abnormalities were detected during the function test performed. The specified transport dimensions refer to the basic unit without attachments. 📄 Want to see the full inspection, extra photos, or a video? Nsdez S Nxiepfx Ai Ajlh Tip: The reference "41490 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, Additional information Frame Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge rim, slope of the loading area towards the rear axle by approx. 8° downwards. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with NIRO sheet metal at the bend as a rope guide - flush with the floor. For trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm Tow hitch Tow hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrical system with 7-pole socket Accessories/Modifications 2 holders for wheel chocks, aluminum side underrun protection, foldable - These are taken over from the truck! Steel underrun protection, quarter-shell fenders with mud flaps - These are taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock 1 holder for 3 pieces of gasoline canisters 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including locking mechanism, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing sleeves on the back Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front wall switched via parking lights with switch on the front wall outside on the driver's side, 1 LED work light, at the rear, with integrated reversing camera including color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage divider 24/12V, 1 7-pole 12V socket = adapter Floor Mega Grip made of interlocking galvanized grating, steel grating 50/4 including with a mesh size of 50 mm. Top side with anti-slip interlocking, continuously laid over the entire main frame platform Tie-down eyes 12 pairs of tie-down eyes in the outer frame, freely pivotable - each 10 tons. 1 at the very front and the last one at the very rear. 1 tie-down eye at the very rear in the middle for attaching the winch cable 12 tie-down eyes recessed in the center of the floor, each 5 tons. Front wall Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front wall height. Each 2 x 12 mounting brackets for lashing chains mounted on the left and right on the front wall Winch Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center on the front wall (recessed with loading bridge), operated with a wireless remote control, rope length min. 35 m x 9.5 mm, with rope window, with rope pressure plate, including overload protection, rope free-running clutch, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating manual Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading with ramps), electro-hydraulically foldable and laterally adjustable - including electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle Ramp surface made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset for resting on loading ramps. Nlodpfx Ajk Unitsi Ajh Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support le

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: TNC640, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MULTIMILL 1000 by EDEL Werkzeugmaschinen GmbH New-machine quality at a price that takes the pressure off your costing. The MULTIMILL 1000 is a 5-axis all-rounder with turning capability, mastering milling and turning in a single setup. Proven EDEL technology, combined with our complete factory refit procedure: every assembly overhauled, all wear parts renewed, fully measured and backed by factory warranty. Technical specifications: 1 5-axis milling machine EDEL MM1000 X/Y/Z: 1,000/800/700 mm 1 NC universal milling head M21 B-axis, (-)10° to (+)187°, 900/1,680/4,000 Nm, 330°/s, (55 rpm) 1 Milling spindle CS-21-180-A 21/32 kW, 100/130 Nm, 18,000 rpm, HSK-A63 1 NC rotary table CRT/1000/H/HT 960/2,048/4,000 Nm, 570°/s, (95 rpm), 20,000 N (centric) Face plate diameter: 900 mm 1 Heidenhain TNC 640 5-axis contouring control electronic handwheel HR 510 DXF converter CAD viewer KinematicsOPT enhanced energy efficiency 1 Remote service 1 Extraction unit for oil and emulsion mist filter systems, capacity approx. 2,000 m³/h cascaded filtration 1 Coolant/lubricant system 950 litre tank capacity External coolant supply: 30 l/min / 20 bar Through-spindle coolant: 20 l/min / 50 bar Wash-down gun: 40 l/min / 2 bar 1 Workpiece measuring system Touch probe BLUM TC 60 BRC radio technology 1 Tool changer HSK-A63 / 52 pockets Njdpfx Aspiqzksi Ajlh Tool diameter 75/130 mm Tool length 300 mm Tool weight 8 kg 1 Chip conveyor Hinge belt / scraper belt conveyor 1 Switchable external air cooling (coolant / air) Coolant: 20 bar / Air: 6 bar 1 Turning technology package Machine control Heidenhain TNC 640 Rotary table CRT/1000/H/HS Tool interface HSK-A 63 Spindle clamping device Tool measuring system for turning tools 1 Switchable internal through-spindle cooling (coolant / air) Coolant: 50 bar / Air: 6 bar 1 Tool changer HSK-A63 / 80 pockets INSPECTION AND DEMONSTRATION AVAILABLE AT ANY TIME Arrange an appointment at our plant, and we will show you the machine in live cutting operation.

Condition: used, mileage: 15,225 km, power: 110 kW (149.56 HP), first registration: 10/2022, fuel type: diesel, empty load weight: 2,286 kg, maximum load weight: 904 kg, overall weight: 3,190 kg, wheelbase: 3,250 mm, next inspection (TÜV): 10/2028, fuel: diesel, color: blue, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), power assisted steering, second-hand vehicle warranty, soot filter, Exterior * Roof rack for trailer coupling * Heated and electrically adjustable exterior mirrors * Wheelbase 3250 mm * Ladder rack behind the cab * Socket in the cab * Spare wheel Interior * Outside temperature display * Armrest for driver's seat * Adjustable co-driver's seat * Comfort driver's seat Nlodpfxszvndaj Ai Aeh * Lumbar support for driver's seat Safety * Adaptive brake light * Driver airbag * Co-driver airbag Comfort and Environment * Hill-start assist * ECO start-stop function * Headlamp assist * Gearshift indicator * Crosswind assist * Mercedes-Benz emergency call system * Multifunction steering wheel * Cruise control * Rain sensor Multimedia * Digital radio (DAB) with Bluetooth hands-free system Condition/Documents * COC papers Other * 230 V socket * 3.0-ton vehicle * 6-speed manual transmission ECO Gear * Storage compartment above the windshield * Storage compartment under the dashboard * Lockable AdBlue filler cap * Trailer load up to 3,450 KG possible * 13-pole trailer socket * Armrest for co-driver's seat * Tachograph control located at the front under the headliner * Digital extra: Remote Services Plus * ECE version * Emission class Euro 6d * Suspension for comfort and cargo protection * Generator 14 V / 250 A * Weight variant 3,190 kg, can be increased to 3450 KG, payload advantage 260 KG * Seatbelt warning system for co-driver * Seatbelt warning system for driver's seat * Seatbelt warning system for rear seats * Semi-automatic climate control system TEMPMATIC * Hydraulic jack * Clothes hook in the passenger compartment * Terminal block for electrical connection * Communication module (LTE) for digital services * Charging package for instrument panel * Steering wheel adjustable in inclination and height * MBUX multimedia system with 7-inch touchscreen * OM 654 DE 20 LA 110 kW (150 hp) 3800/min * Platform body with aluminum side walls * Signs / printed materials in German * Driver seat occupancy detection * Jump start connection * Fabric Maturin black * First-aid kit * Fleece battery 12 V 92 Ah * Preparation for intelligent tachograph EU * Warning triangle * Wet wiper system * Thermally insulated glass with band filter on the windshield * Registration certificate, Part II * Battery main switch, single-pole Other: * Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT)? * For all vans: On request, 12 or 24 months Mercedes-Benz used car warranty is possible. * We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing / financing via Mercedes-Benz Bank. We will gladly prepare an offer for you. * No liability for printing and typographical errors * Errors and prior sale reserved

Condition: used, mileage: 15,225 km, power: 110 kW (149.56 HP), first registration: 10/2022, fuel type: diesel, empty load weight: 2,286 kg, maximum load weight: 904 kg, overall weight: 3,190 kg, wheelbase: 3,250 mm, next inspection (TÜV): 10/2028, fuel: diesel, color: blue, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), power assisted steering, second-hand vehicle warranty, soot filter, Exterior * Roof rack for trailer coupling * Heated and electrically adjustable exterior mirrors * Wheelbase 3250 mm * Ladder rack behind the cab * Socket in the cab * Spare wheel Interior * Outside temperature display * Armrest for driver's seat * Adjustable co-driver's seat * Comfort driver's seat * Lumbar support for driver's seat Safety * Adaptive brake light * Driver airbag * Co-driver airbag Comfort and Environment * Hill-start assist * ECO start-stop function * Headlamp assist * Gearshift indicator * Crosswind assist * Mercedes-Benz emergency call system * Multifunction steering wheel * Cruise control * Rain sensor Multimedia * Digital radio (DAB) with Bluetooth hands-free system Condition/Documents * COC papers Other * 230 V socket * 3.0-ton vehicle * 6-speed manual transmission ECO Gear * Storage compartment above the windshield * Storage compartment under the dashboard * Lockable AdBlue filler cap * Trailer load up to 3,450 KG possible * 13-pole trailer socket * Armrest for co-driver's seat * Tachograph control located at the front under the headliner * Digital extra: Remote Services Plus * ECE version * Emission class Euro 6d * Suspension for comfort and cargo protection * Generator 14 V / 250 A * Weight variant 3,190 kg, can be increased to 3450 KG, payload advantage 260 KG * Seatbelt warning system for co-driver * Seatbelt warning system for driver's seat * Seatbelt warning system for rear seats * Semi-automatic climate control system TEMPMATIC Nsdpfxozvndgj Ai Aolh * Hydraulic jack * Clothes hook in the passenger compartment * Terminal block for electrical connection * Communication module (LTE) for digital services * Charging package for instrument panel * Steering wheel adjustable in inclination and height * MBUX multimedia system with 7-inch touchscreen * OM 654 DE 20 LA 110 kW (150 hp) 3800/min * Platform body with aluminum side walls * Signs / printed materials in German * Driver seat occupancy detection * Jump start connection * Fabric Maturin black * First-aid kit * Fleece battery 12 V 92 Ah * Preparation for intelligent tachograph EU * Warning triangle * Wet wiper system * Thermally insulated glass with band filter on the windshield * Registration certificate, Part II * Battery main switch, single-pole Other: * Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT)? * For all vans: On request, 12 or 24 months Mercedes-Benz used car warranty is possible. * We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing / financing via Mercedes-Benz Bank. We will gladly prepare an offer for you. * No liability for printing and typographical errors * Errors and prior sale reserved

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Technical data: Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Nlsdpfsz Sm Umjx Ai Ash Electric drive Work table Condition: used Applications: Production of hardback books, Bookbinding, Printing companies, Graphic arts companies, Production of albums, catalogs, and covers.

Condition: excellent (used), For sale: a professional, two-spindle eyeletting/riveting machine, Constantin Hang Typ 150 3P, manufactured in Germany in 1983. This machine is designed for the simultaneous installation of two eyelets or rivets, significantly increasing work efficiency. The machine is used in bookbinding facilities, printing companies, and factories producing binders, folders, calendars, tags, and other paper products. It is equipped with two working units, an adjustable table, and precise guides that allow for accurate material positioning. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Nsdpfez Sm Urex Ai Aolh Model: Typ 150 3P Year of manufacture: 1983 Serial number: 35805 Country of manufacture: Germany Type: two-spindle eyeletting/riveting machine Two working heads Adjustable work table Guides and material position adjustment Robust industrial construction Electric drive Condition: used Applications: eyelet installation, riveting, binder production, folder production, calendars, promotional tags, cardboard packaging, bookbinding and printing. The machine is sold in the condition shown in the photos.

Condition: excellent (used), For sale: a Tünkers roller laminator designed for the uniform application of adhesive to paper, cardboard, corrugated board, and other flat materials. This machine is used in bookbinding facilities, printing houses, packaging production plants, and during laminating and coating processes. The machine is equipped with a Hitachi X200 frequency inverter, which allows for smooth adjustment of the roller speed and adaptation of the operating parameters to the type of material being processed. Its robust, industrial design and precise roller arrangement ensure even distribution of adhesive across the entire working width. Technical data: Manufacturer: Tünkers GmbH Country of manufacture: Germany Type: roller laminator / adhesive application machine Electric drive Speed control via Hitachi X200 frequency inverter Motor with PTC thermal protection Metal work table Adjustable roller pressure Machine number: 12/201118/28 Applications The device is intended for: Nsdpfx Asz Snacoi Aolh applying adhesive to paper and cardboard, laminating paper onto corrugated board, laminating materials, gluing veneers, packaging production, bookbinding operations, printing applications. Included in the set: Tünkers roller laminator, Hitachi X200 frequency inverter, wiring, components visible in the photos. Condition The device is used and shows normal signs of wear. It is sold in the exact condition and with the complete set of components as shown in the photos.

Condition: excellent (used), For sale: a glue roller from Karl Tränklein, a renowned German manufacturer of bookbinding machines. This device is designed for the precise and uniform application of glue to paper, cardboard, corrugated board, veneer, and other flat materials. The machine is equipped with an electric drive, a metal working roller, and adjustable glue application settings, allowing the operating parameters to be adapted to the type of material being processed. Its robust, heavy-duty construction ensures stability and long-term durability. Technical specifications: Manufacturer: Karl Tränklein Country of origin: Germany Type: glue roller / applicator Drive: electric Power supply: 400 V Adjustable glue application Metal working roller Work table with guides Drip tray for excess glue Nljdpfx Aisz Snaho Aeh Heavy-duty, robust construction Applications: bookbinding, printing, packaging production, gluing paper, cardboard, and corrugated board, applying glue to veneer and other flat materials. Condition: used, fully functional. It shows normal signs of wear and tear from use. The visual condition and completeness are consistent with the photos.

Condition: used, machine/vehicle number: ubk., No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Swivel bending machine Condition: good Machine weight: approx. 6.75 t Working area Sheet metal width: 6,060 mm Sheet metal thickness: 2 mm Performance data Total power requirement: 7.5 kW Dimensions Nlsdpfx Aie Aa Ngne Aeh Length: approx. 7.0 m Width: approx. 2.0 m Height: approx. 2.5 m EQUIPMENT Motor-driven back gauge

Condition: good (used), Renz Punch 500 Perforator The unit is in very good condition. It is a newer model featuring adjustable side guides. Electrically driven and operated via a foot pedal. Nljdpfjz S Un Nsx Ai Ash Includes a 3:1 pitch perforation tool (4 mm hole) with a thumb-cut (hanger notch) feature. Manufacturer’s description: Perforation machine with a working width of up to 500 mm. Designed for continuous operation and heavy-duty use. Operating cycle triggered by a foot pedal. Perforates up to 40 sheets (4 mm) in a single cycle. Quick and easy replacement of perforation dies. Compatible with dies both with and without a thumb-cut (hanger notch). Supports QSA (Quick Size Adjustment) dies, allowing for rapid format changes by deactivating specific pins without needing to remove the die. Compatible with two-part dies—a single tool can be used for both standard document perforation (without a thumb-cut) and calendar perforation (with a thumb-cut; in the latter case, the maximum perforation width is 465 mm). Requires a 3-phase power supply. Weight: 120 kg.

Year of construction: 2020, condition: refurbished (used), functionality: fully functional, This is the latest generation iVario Pro 2-S from the premium manufacturer Rational. The iVario Pro 2-S is offered including the base frame shown in the picture. The multifunctional pan has been fully overhauled in our in-house workshop and the unit is fully functional. The unit is offered with a 6-month warranty on all electrical parts. The iVario Pro 2-S is available from week 45. These are sample images; original images will follow shortly. The list price for this unit including the base frame is: €19,140 net / €22,776 gross. Our offer price is €8,815.12 net = €10,490 gross. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Checked & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: 1100 x 938 x 485 mm (1080 mm with base frame) Power connection: V: 400 / kW: 20.5 / Hz: 50 Serial number: E11VK20118050776 Year of manufacture: 2020 Weight: 134 kg Capacity: 2 x 25 liters Servings per batch: 50-100 Njdpfjz Tfcgox Ai Aslh Condition: used, fully overhauled, fully functional Special features: iCookingSuite - intelligent cooking assistant with the 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, milk and dessert dishes, soups and sauces, or the 5 cooking processes: boiling, frying, deep-frying, braising and finishing. iZoneControl: flexible division of the pan base into zones with different temperatures. Low-temperature cooking: (also overnight), confit, sous-vide cooking. Vario Cooking Control mode: the desired result for the product is selected with a finger tap, e.g. from light to dark. Vario Boost: patented heating system for absolutely even and precise temperature transfer. Programming mode: creation of manual programs and management of cooking processes. Integrated WiFi interface, e.g. for connection to ConnectedCooking. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Sales are made exclusively according to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout Nlodpjz Uxmbefx Ai Aeh - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Approximately 56,000 power-on hours. Cutting hours - 17,000 Available in the UK. Price on application, plus VAT. Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*