Used Bystronic Byflex 4010 for sale (159)

Condition: used, Bystronic Type: ERMM180 Thermoplastic Applicator Application Area Gjdpfx Ajzdyh Hskvjui The thermoplastic applicator applies a thermoplastic material to rectangular glass panes within a production line for solar modules. The material forms a seal to a second glass pane, which is applied in a later process step. The panes are fed in, the material is applied, and the panes are removed on horizontally running belts/conveyors. The thermoplastic applicator is a highly advanced machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve a high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Maximum width of the applied sealant bead: 12.0 mm Required constant inlet pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Operating temperature of the sealant: 110°C to 130°C Ambient Conditions and Emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound pressure level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material-lid container D18 according to DIN 6644 – with foot (F1) and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and have a defined viscosity curve. Only use materials that have proven themselves in practice and have been approved by the manufacturers of these materials and by Bystronic for your intended use. For detailed product descriptions and information on the handling, storage, and disposal of the material used, please refer to the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions of portal robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the portal robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions of drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions of control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with butyl material. Condition: used From a test laboratory, in new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2021, Bystronic BySmart Fiber 10kW Fiber Laser Cutting Machine (2021) Well-maintained Bystronic BySmart Fiber 10kW laser cutting machine available for sale. Gusdpfezzbx Ujx Akvsi The machine was manufactured in 2021 and has only 3,900 cutting hours with approximately 12,000 operating hours. The machine is currently in production and can be inspected under power by appointment. The BySmart Fiber series combines high productivity, precision cutting quality and user-friendly operation, making it suitable for a wide range of sheet metal processing applications. Manufacturer: Bystronic Model: BySmart Fiber 10kW Year of Manufacture: 2021 Laser Source: Fiber Laser Laser Power: 10 kW Operating Hours: 12,000 h Cutting Hours: 3,900 h Power Supply: 3 x 400V / 50Hz Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Bystronic Model: BySmart Fiber 10kW Year of Manufacture: 2021 Cutting Hours: 3,900 h Laser Power: 10 kW Operating Hours: 12,000 h Laser Source: Fiber Laser

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input current: 125 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Bystronic / Hegla laminated glass (VSG) cutting system Speedcut and ProLam 3700, comprising of following components: Gsdpjzu Ayyjfx Akveui - Speedcut float glass cutting table with tool changer and second cutting oil circuit, flat belt conveyor and air cushion, with 2 special cutting heads for laminated glass cutting (lower cutting head can be deactivated for float glass cutting) - Hegla conveyor belt TW 7833 RW - Hegla cross-cutting station STB I 33 - Hegla laminated glass cutting bridge ProLam 37 , including a traverne rotation device, remote maintenance via the internet using VPN, including software - Hegla air cushion table LTR 3034, with 4 support arms The entire plant is in excellent condition and will be available EXW from its current location from the end of December 2026.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 15,000 h, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 115 mm/s, pressing force: 225 t, table length: 4,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, 1 used 7axis Bystronic Xact Smart 225/4100 down stroke hydraulic cnc pressbrake for sale Gujdpoz D D Syjfx Akvei The Bystronic Xact Smart 225/4100 is a high-precision, industrial hydraulic down-stroke CNC press brake designed to deliver high-quality Swiss bending technology at an accessible price point. It is engineered for handling heavy-duty, versatile sheet metal fabrication with consistent accuracy across its entire bed length. Key Technical Specifications The standard configuration of the Xact Smart 225 model includes the following core mechanical specifications: Pressing Force: 225 tonnes (2250 kN) for high-capacity heavy bending. Bending Length: 4100 mm (4.1 metres), providing ample room for long components. Standard Stroke: 200 mm  Operational Features & Versatility Axis Configuration: Configured with 5-axis back gauge, total axis; 7 (Y1,Y2X, X1, R, Z1, Z2). Age: 2019 Crowning System: Features active, hydraulic, or automatic static crowning to counteract beam deflection, guaranteeing strict angle consistency over the entire 4-metre bed length. Intuitive Software: Controlled through Bystronic’s User Interfaces, utilizing a large multi-touch screen that handles 3D simulation  Delivery and installation in your works available

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, stroke length: 200 mm, pressing force: 100 t, Equipment: CE marking, safety light barrier, For Sale: Bystronic Xact 100 CNC Press Brake (3.1m x 100T) Available immediately: A exceptionally clean, well-maintained Bystronic Xact 100 CNC Press Brake (2012 Model). This free-standing, down-stroking machine offers precision 4-axis bending with automated crowning, making it an excellent addition to any precision fabrication facility. Detailed technical specifications and machine configurations can be verified through the Bystronic Official Group Website. Machine Overview & Configuration Control system: Equipped with a Cybelec DNC 880S Control unit. Axis configuration: 4-Axis control plus crowning (Y1, Y2, X, R + Manual Z). Gujdpfjzta A Aox Akvji Safety systems: Integrated Fiessler Laser Guards for optimal operator protection. Guarding package: Features full rear sliding screen guards and side guards. Wandering foot pedal/pedestal controls. Technical Specifications Parameter Measurement Bending Capacity1000 kN (100 Tonne) Working Length3100 mm Distance Between Frames2550 mm Throat Depth400 mm Maximum Stroke200 mm Rapid Approach Speed100 mm/s Working Speed1 – 10 mm/s Return Speed95 mm/s Overall Weight9000 kg Machine Identity Manufacturer: Bystronic Model: Xact 100Year of Manufacture: 2012 (Model Year 2012)

Condition: good (used), functionality: fully functional, Year of construction: 2011, Bystronic Bystar 3015 Flatbed Laser CO² + Bytrans Cross 3015 (Sheet Metal Automation) Laser medium: CO2 Laser beam diameter: 20mm Laser power: 4.4 kW Machine dimensions (L/W/H): 9500/6500/3500 (incl. Doldson extraction system) Table length and width: 3000/1500 mm Cutting area -x/-y: 3000/1500 mm Gsdpfxoyztcho Akvsui Sheet thickness steel: 25 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminium: 12 mm Machine operating hours: 106,367 h Laser operating hours (excitation module): 73,725 h Beam on hours: 50,873 h Includes: Depro 6-SPRK extraction system Bylaser 4400 resonator WKL 430 chiller unit Subject to prior sale, modifications, and errors!

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Technical Data: CNC Control: BYSTRONIC BySoft Laser Type: CO2 Working Area: 3000 x 1500 mm Travel Range X-Axis: 1562 mm Godjz E Axujpfx Akveui Travel Range Y-Axis: 772 mm Travel Range Z-Axis: 100 mm Bylaser Power: 2.2 kW Wavelength: 10.6 µm Rapid Traverse X/Y/Z: 100 m/min Cutting Capacity Steel: 8 mm Cutting Capacity Stainless Steel: 6 mm Cutting Capacity Aluminum: 4 mm Fume Extraction System with Water Cooling: EF WKL 300-F CE Marking Dimensions (Length x Width x Height): approx. 13500 x 2500 x 2500 mm Weight: approx. 13.5 tons Condition: Very good condition Only 6,500 operating hours The machine comes from a vocational school, not from a production facility The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, laser power: 4,400 W, Used very clean Bystronic Bystar 3015 4.4kW for sale / flat bed industrial cnc laser for sale Bystronic ByStar 3015 4.4kW BRAND: BYSTRONIC YEAR: 2008 MODEL: ByStar 3015 APPLICATION TYPE: LASER CUTTING LOCATION: UNITED KINGDOM MACHINE TYPE: LASER CUTTING MACHINES (CO2) Fully Serviced and Well Maintained CONTROL UNIT BRAND: BYSTRONIC Technical Information BRAND: BYSTRONIC LASERPOWER: 4.4KW / 4400 watts LASER TYPE: CO2 LASER BRAND: BYLASER 4400 MOVEMENT X-AXIS MOVEMENT: 3000 MM Y-AXIS MOVEMENT: 1500 MM Machines hours: Cut hours: 9,000 ADDITIONAL EQUIPMENT Geder Hcmrspfx Akveui – BYPOS – CUT-CONTROL – 2 CUTTING HEADS (5″, 7.5″)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2003, Model: Bystar 3015 ByLaser 4400 Year of manufacture: 2003 Operating hours (turbo): 0 hours, general overhaul CNC control: Byvision P8009, Windows XP Bystronic programming software Computer replaced in 2020 Working area: 3,000 x 1,500 mm Gjde Aaygrepfx Akvjui Travel range: x: 3,048 mm, y: 1,524 mm, z: 70 mm Maximum sheet thickness (steel): 25 mm Laser: Bystar ByLaser 4400, laser power: 4,400 W, turbo unit general overhaul Tube cutting device Gearbox, cooling system, extraction system, valve block for gases Machine weight: approx. 12,500 kg Dimensions (length x width x height): 10,150 x 6,500 x 2,450 mm A mirror revision was carried out, all glass tubes were replaced; the machine was also completely cleaned and inspected.

Condition: used, Year of construction: 2015, Bystronic CO2 laser with 6000W laser power including automation and storage system. Gjdpfx Akozdtyisvjui Automatic pallet changer Byvision cnc control Automatic nozzle centering Regulated Pulse Piercing Nozzle cleaning Collision detection Cooling unit Filter unit More info and videos available on request. Viewing possible upon appointment. Immediately available. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Working dimensions: 3000 x 1500 mm Laser output: 6000W Automation (sorting and storage): ASTES4SORT (12 positions) Storage: TRAFO (12 storage positions) Power on: 41643h Cutting hours: 25394h

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,802 h, controller manufacturer: BYSTRONIC, controller model: ByVision, This Bystronic BySprint Fiber 6520 was manufactured in 2016. It features a 6 kW laser power, handling work table sizes up to 6500 mm x 2000 mm. It efficiently processes materials like carbon steel, copper, and brass. The CNC control system, BYSTRONIC ByVision, includes a touchscreen and remote control for cutting parameter adjustments. Consider the opportunity to buy this Bystronic BySprint Fiber 6520 fiber laser cutting machine. Contact us for more information about this machine. Guedez Ndwkjpfx Akvji Additional information • Type: Fiber Laser Condition: Very good, regularly renovated • CNC control system: BYSTRONIC ByVision with touchscreen and remote control for cutting parameter modification • Work table size (length x width): 6500 mm x 2000 mm • Laser power: 6 kW • Laser beam wavelength: 1060-1080 nm • Cutting head: Equipped with integral capacitive height sensor for precise beam control • Maximum cutting thickness for carbon steel: Up to 20 mm • Materials processed: Carbon steel, copper, brass

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 050155-1, Glass cutting table by Bystronic, model SMFR. Technical specifications can be found in the photos below. Full technical documentation available. Gsdpox Ekvmjfx Akvjui

Condition: excellent (used), Year of construction: 2012, tonnage 100 T Folding length 3100.00 mm guarding AKAS FIESSLER machine mounted laser guards CNC Cybelec 880s Throat 250.0 mm Vertical stroke 200 Working speed 100mm per/sec Godpfx Asztl Nzokvjui Axis number 4 Motor power 11.0 kW ----- Weight 9000.0 kg condition excellent can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 2022, Excellent ByStar 4020 fiber laser with 15kW laser output and ByTrans Extented automation. Including nozzle changer, Mixgas and outdoor version of dust extraction. Viewing possible upon appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Guodpfjy Erfvsx Akvoi Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Working dimensions: 4000 x 2000 mm Laser output: 15000W Automation: ByTrans Extended Power on hours: 5734h Cutting hours: 1570h

Condition: like new (used), Year of construction: 2021, pressing force: 225 t, Bystronic Xact Smart 225/4100 – Hydraulic press brake Manufacturer: Bystronic Model: Xact Smart 225/4100 Serial number: XACT21278SE Year of manufacture: 08/2021 Technical data: Maximum pressing force: 2250 kN Maximum working length: 4100 mm Maximum stroke: 200 mm Rapid traverse speed: 140 mm/s Working speed: 1–10 mm/s Return speed: 115 mm/s Guodpfsy U I R Tsx Akvsi Machine weight: 15,000 kg Equipment: Tools

Condition: excellent (used), Bystronic BySprint 3015 2kW Fiber Laser With Byloader Sheet Loader And Shuttle Table. New 2011. Upgraded head and new fibre fitted in 2020 at a cost of £46k. Maintained by Bystronic. Fume extraction. Gusdpfx Akoz It U Ssvei Available with Nitrogen plant including Sauer Tornado Booster Compressor.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 49,641 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: Bystronic, bending force (max.): 40 t, working width: 60 mm, stroke length: 200 mm, oil tank capacity: 100 l, travel distance X-axis: 300 mm, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 955 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Model: Xpert 40/1030 Tonnage 400 kn Bending length 1030 mm Standard stroke [S] 200 mm Open height [D] 515mm Distance between side frames 1060mm Table Width 60mm Max. back gauge range X-axis 500mm X-axis travel 300 mm Godpfx Akextf A Iovjui X-axis speed 1500 mm/s R-axis travel 100 mm R-axis speed 500 mm/s Z-axis travel 955 mm Z-axis speed 2000 mm/s Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm 1.1 Xpert 40/1030 1.2 ByVision Bending control with 22 Inch Full HD display and touch technology 1.3 Dynamic drive system (DDS) with Energy Saver 1.4 Automatic tool protection 1.5 Ergo foot switch 1.6 Rear protection sliding door electrically controlled 1.7 User manual (on CD) 1.8 Ambient air temperature 7°C up to 35°C 1.9 Voltage: 400/480 V, 50/60 cycles, 3 Ph (other parameters available on request)

Condition: like new (used), Year of construction: 2022, Bystronic ByBend Smart Hydraulic press brake Serial number: BYBEND22335SE Year of manufacture: 10/2022 Maximum pressing force: 2250 kN Working length: 4100 mm Maximum stroke: 300 mm Machine weight: 16,500 kg Guodey U I Ryspfx Akvsi Equipment: Tools

Condition: excellent (used), Year of construction: 2011, Bystronic Xpert 150 press brake with Bystronic CNC control,. bending length 4,100 mm, max. force 1,500 kN, max. stroke 215 mm, automatic stops, Bystronic Fast Bend laser system. Serial No.: 11530057 (2011). Machine weight: 11,800 kg. Country of origin: Germany. Axes: Y-beam up/down X-stopper travel and bending distance adjustment R-stopper up/down 2 x Z—stopper movement sideways and toward each other 1 x Z—manual feed Gjdpfx Akoyrnfdsvoui

Condition: excellent (used), Year of construction: 2016, pressing force: 320 t, table width: 4,100 mm, Bystronic Xpert 320ton x 4metre cnc pressbrake Year 2016 Used high quality Bystronic Xpert 320/4100 Gsdpfsrvyudox Akvoui 6 axis 4 metre x 320 ton CNC down stroke hydraulic pressbrake for sale Bystronic – fully serviced with Bystronic uk as per photo Model: Xpert 320/4100 • Working length 4100mm • Max. press force 3200kn • Max stroke 265mm 320/4100 free standing CNC Pressbrake 6axis / 6 axes: Y1 – Y2 – Z1 – Z2 – X – R • Year 2016 • Complete with: • Bystronic ByVision control • Upper and Lower Bystronic Tooling • Hydraulic upper and lower tool clamping • 4 axis back gauge • Crowning • No pit required

Condition: like new (used), Year of construction: 2022, pressing force: 80 t, Bystronic Xpress 80/2100 Hydraulic Press Brake Manufacturer: Bystronic Model: Xpress 80/2100 Serial Number: Xpress 22334EU Year of Manufacture: 10/2022 Technical Data: Maximum Press Force: 800 kN Godpfjy U I Tuox Akvjui Maximum Working Length: 2100 mm Maximum Stroke: 200 mm Machine Weight: 6000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 200x3100, control type: CNC control, actuation type: hydraulic, controller manufacturer: Bystronic, bending force (max.): 200 t, working width: 3,100 mm, stroke length: 215 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, overall weight: 12,000 kg, number of support arms: 4, pressing force: 200 t, working range: 3,100 mm, Equipment: CE marking, documentation/manual, emergency stop, lower tooling, safety light barrier, upper tooling, Used High quality / very good condition Bystronic Xpert 3metre x 200ton cnc pressbrake for sale Bystronic Beyeler Xpert 200×3100 Make: Bystronic Model: Xpert 200 Year / new: 2008 Total axis: 8 – 6axis back gauge X1 X2 R1 R2 Z1 Z2 Hydraulic upper and lower tool clamping Tool stacking system Crowning Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 200ton Fully serviced with Bystronic Uk General Information: Model: XPERT2000x3100 Manufactured: 2008 Godpfx Akevua Ifevoui Specification: Working length mm 3100 press force kN 2000 stroke mm 215 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150 Weigh 12,000kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,399 h, laser power: 4,000 W, travel distance X-axis: 4,000 mm, number of axes: 3, This 3-axis Bystronic BySprint Fiber 4020 Fiber 4Kw was manufactured in 2019. It features a maximum sheet size of 4000 x 2000 mm and a powerful 4000-watt laser. If you are looking to get high-quality fiber laser cutting capabilities, consider the Bystronic BySprint Fiber 4020 Fiber 4Kw machine we have for sale. Contact us for further details. Guodpfx Ajy A Inhskvji • Machine has a new cutting head (ca April 2026) • Max. sheet size: 4000 x 2000 mm Additional equipment • ByLoader (included)

Condition: excellent (used), stroke length: 215 mm, power: 11 kW (14.96 HP), pressing force: 150 t, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, Bystronic PR 150 Ton x 3100mm Gsdpe Aa A Urjfx Akvjui 6 Axis Back Gauge. X1. X2. R1. R2. Z1. Z2 Hydraulic Upper Tool Clamping Hydraulic Crowning Hydraulic Hemming table ( Dutch Folding ) 100mm Extra Daylight Motorised Laser Guarding Cybelec ModEva 12 Colour Graphic Control Full Upper & Lower Tooling Set of Manuals Can be viewed under power We can load to suitable transport

Condition: ready for operation (used), Year of construction: 2014, operating hours: 35,000 h, laser power: 6,000 W, travel distance X-axis: 4,090 mm, overall weight: 24,500 kg, total width: 7,700 mm, total height: 2,400 mm, product length (max.): 15,000 mm, number of axes: 3, CO2 laser cutting machine manufactured in 2014. This Bystronic ByAutonom 4020 features a powerful ByLaser 6000 with a cutting range of 4090 mm x 2060 mm x 80 mm. It has a maximum workpiece weight of 1580 kg and can handle sheet thicknesses of up to 25 mm for steel and stainless steel. If you are looking to get high-quality cutting capabilities, consider the Bystronic ByAutonom 4020 machine we have for sale. Contact us for further details. Godsz Nh Sispfx Akvsui - Cutting Range X-axis: 4,090 mm- Nominal Sheet Size X-axis: 4,000 mm- Cutting Range Y-axis: 2,060 mm- Cutting Range Z-axis: 80 mm- Max. Positioning Speed Parallel X/Y: 120 m/min- Max. Positioning Speed Simultaneous: 169 m/min- Max. Axis Acceleration: 30 m/s²- Cutting Hours: Approx. 14,500 hours- Overall System Length (L): Approx. 15,000 mm- Overall System Width (W): Approx. 7,700 mm- Overall System Height (H): Approx. 2,400 mm- Max. Workpiece Weight: 1,580 kg- Max. Sheet Thickness Steel: 25 mm- Max. Sheet Thickness Stainless Steel: 25 mm- Max. Sheet Thickness Aluminium: 15 mm- Wavelength: 10.6 µm- Laser Source Weight: 2,050 kg- Laser Source Dimensions (L x W x H): 2,850 mm x 1,150 mm x 2,100 mm- Table Exchange Time: 35 s- Cutting Lenses / Focal Lengths: 5", 7.5", 9"- Total Power Consumption (with extraction, chiller): 78 kW- Electrical Connection Machine: 3x400V / 3x480V, 50/60 Hz, Max. Power 73 kVA (125 AT)- Chiller Unit: ef cooling WKL560 (Refrigerant R407c, 18 kg, 3x400/480V, 40 kVA, Weight 1,050 kg, Dimensions 2,550 x 1,000 x 2,000 mm)- Laser Gas (Premix): He/N2/CO2, Normalmix consumption 12 Nl/h, Fastmix consumption 120 Nl/h- Cutting Gas: Oxygen (12 bar) / Nitrogen (25 bar)- Compressed Air: 9 bar dynamic, max. consumption 4.5 Nm³/h (machine) + 3 Nm³/h (dust collector)