Used Bystronic Byjet L 4022 for sale (160)

Condition: used, • For triple glazed insulating glass • Travel direction: right to left • Maximum glass dimension: 2700 x 4500 mm • Maximum single pane thickness: 15 mm Bwedpfxow Upq Ho Aaqew • Maximum package thickness: 60 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT Bodpfx Ajxf Hm Ssaqjww 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. In good working condition. Inspection is possible by appointment. Available: NOW

Condition: good (used), functionality: fully functional, Right-to-left production line for double and triple units, automatic gas filling for double units, Forel sealing robot from 2022 for shapes (catalogue only, not DXF files), double pumps for using Polysulfide (PS) and Silicone (SI). Possible unit sizes: L4000xH2500mm. Bwodpfxexcww Ae Aaqew Bystronic Lenhardt washing machine for single sheets, max thickness 15mm. Automatic gas-filling press from L 350 up to 4000mm in length and 170x2300mm in height. Max thickness 60mm. Year of manufacture: 1994.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 28,300 h, machine/vehicle number: 16500126, Press force: 400 kN Total bending length: 1030 mm Standard stroke [S]: 200 mm Clearance [D]: 515 mm Distance between columns: 1060 mm Table width: 60 mm X-axis backgauge travel range: 500 mm X-axis travel: 300 mm X-axis travel speed: 1500 mm/s R-axis travel: 100 mm R-axis travel speed: 500 mm/s Z-axis travel: 955 mm Z-axis approach speed: 2000 mm/s Y-axis approach speed: 300 mm/s Maximum Y-axis bending speed: 25 mm/s Y-axis positioning accuracy: 0.004 mm Oil capacity: 100 l Main drive power: 7.5 kW Weight: 4 t Length, approx. [L]: 1520 mm Width, approx. [W]: 1584 mm Bedpfx Aaswv N Nasqsww Height without increased clearance and stroke, approx. [H]: 2449 mm 1. Intelligent control system and drive with an exceptionally low noise emission (below 75 dB) in the Xpert 40 enables part production with about 30% lower energy consumption compared to conventional electrically-driven machines. 2. ByVision software with a 22-inch LCD display and touch technology 3. Intelligent process control guidance with Energy Saver 4. Automatic tool protection system 5. Foot pedal 6. Electrically operated protective sliding doors 7. User manual on CD 8. Ambient temperature from 7°C to 35°C 9. Voltage: 400 V, 50 Hz, 3 Ph 10. 'Bend G2' – optical safety system with manual height adjustment 11. 6-axis backgauge (3 additional axes) 12. 3-backgauge set - Xpert 40 (N0002.0040.000) - Set for integrating a third backgauge in the press brake 13. Ergonomic LED lighting package - Light output: 1500 lux 14. Ergonomic front supports with table. Max. load is 35 kg. 15. 'At your fingertips' tool cabinet - accommodates 3m of tools within easy reach (1 set of punches and 2 sets of dies). 16. Optical bending guidance system – the operator is guided throughout the bending process by the optical guiding system. 17. Ergo Bending Line Laser – Bystronic Bending Line Laser serves as a visual assistance for the operator by projecting a bending line on the material surface. The operator is supported by a virtual bending line when the backgauge fingers cannot be used (fully or partially). The laser line can be set at different heights depending on the die height (e.g., 55 / 100 mm), depending on material thickness or workpiece size. 18. Productive XPT clamping package (WILA NSCL II upper tool clamp and T12/90 table) 19. WILA hydraulic clamping package includes both upper and lower tool clamping with T12/90 table. 20. WILA NSCL II/XPT upper tool clamping (Productive clamping pack XPT) – XPT-type (Wila) upper tool clamping allows tool mounting in 0 and 180° orientations. 21. T12/90 table (Productive XPT clamping package) – T12/90 table with a height of 90 mm and width of 72 mm offers extensive space for Z-bends. The machine is fully operational. In continuous use. Viewing and testing of the machine are welcome.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 19,125 h, machine/vehicle number: 269, laser type: fiber laser, laser hours: 8,003 h, laser power: 6,000 W, laser wavelength: 1,060 nm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 12 mm, working length: 4,000 mm, working width: 2,000 mm, Equipment: CE marking, documentation/manual, For sale: Bystronic BySmart Fiber 4020 laser cutting machine. Year of manufacture: 2021 Cutting hours: 8,003 Operating hours: 19,125 The machine is in excellent condition, continuously in operation and serviced by Bystronic authorized service. Available for inspection while in operation. Specifications: Laser power: 6,000W Sheet nominal size: 4,000 x 2,000mm Load capacity of transfer table: 1,900kg Table exchange time: approx. 28s Processable sheet thicknesses: Steel DC01: 0.8–3.0mm Steel DD11: 4–12mm Ruukki 250 C Laser steel: 15–25mm Hot-dip galvanized steel DX51D: 0.8–5mm Electro-galvanized steel DC01+ZE: 0.8–5mm Stainless steel X5CrNi18-10: 0.8–30mm Aluminum: 0.8–30mm Copper: 0.8–12mm Bodpfx Aaexdxfdoqjww Brass: 0.8–15mm

Condition: used, functionality: fully functional, Year of construction: 2013, Resonator package as shown in the picture for sale Bedpfxjxbnige Aaqeww

Condition: used, • Frame bender (Alu/Thermix) maximum dimensions 2.2 x 4.0 meters • Year of manufacture: 2005 • With printer for profile labeling Bwodow Upqgepfx Aaqew • Price on request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, degree of automation: automatic, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, A Bystronic CNC CO2 laser cutting system is available. Laser source: ByLaser 4400, laser power: 4400W (4.4kW), working range X/Y/Z: 3000mm/1500mm/170mm, max. workpiece weight: 890kg, positioning accuracy: +/-1mm, repeat accuracy: +/-0.05mm, rapid traverse: 50m/min, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, max. sheet weight: 160kg/m². Machine weight: approx. 6000kg, control: ByVision CNC, Cutting time: 29.064 h, Power on : 74.924h. Documentation available. On-site inspection is possible. Bwsdpfow Hrqbjx Aaqow

Condition: ready for operation (used), Year of construction: 2014, Bystronic Bytrans Extended 3015 Bwjdpfxsv Ra T Tj Aaqjw

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 32,600 h, machine/vehicle number: ID 30042005, laser hours: 8,735 h, laser power: 10,000 W, sheet thickness aluminum (max.): 30 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, Machine Code: 10087833 - ByStar Fiber 8025 Fiber 10 KW Production Year: 2019 / Serial Number: 751 / Cutting Hours: 8,735 / Machine on-hours: 32,600 / Serial No Technical: ID 30042005 Bwedpfx Aoxd Ug Deaqew Machine No: 10087833 All maintenance of the machine has been carried out by authorized service, and service records are available. Only stainless steel sheet has been cut on this machine. The machine is fully operational. The cutting head has been upgraded to SSC V.2.2. SSC V2.2 Serial No: 10145822 Fiber Cable IPG: HLC 16 FF2309266 The machine can be inspected at the Bystronic headquarters. On-site inspection is possible. Transportation is at the buyer’s expense. Delivery will be ex-works.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Working length 5100 mm Pressing force 400 t Max. stroke 365 mm Bedpfsw Tqphex Aaqoww 34 kW 38 tons weight

Condition: good (used), Year of construction: 1997, Lifting capacity: 1.300 kg Max. sheetsize: 4.000 x 2.000 mm No. of cups: 19 pieces Size LxWxH: 480 x 200 x 250 cm Weight: 1.400 kg Bedpjwavukjfx Aaqeww

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Bedpfx Aod N Erpeaqsww Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Year of construction: 2008, Laser type: CO2, laser power: 2.2kW, working range X/Y/Z: 1500mm/3000mm/100mm, max. material thickness: aluminum: 8mm, mild steel: 10mm, stainless steel: 6mm, max. workpiece weight: 890kg. Positioning speed X/Y: 100m/min, simultaneous positioning speed: 140m/min, total energy consumption: 37kW, max. sheet weight: 70kg/m². Dimensions X/Y/Z: 6000mm/6400mm/2150mm, weight: approx. 13500kg. Bwsdpfxottv T Ss Aaqjw

Condition: used, Year of construction: 2007, x-travel 1562 mm y-travel 772 mm z-travel 100 mm Bsdpfx Asvxwyyeaqeww laser capacity in Watt 2200 positioning speed x 100 / y 100 m/min. working area 3000 x 1500 mm fuse 80 A Power connection 37 kVA weight of the machine ca. 13,5 t dimensions of the machine ca. 13,5 x 2,2 x 5,60 m Co2 ByLaser 2200M Flue gas extraction with water cooling WKL 300-F Laser power: 2.2 kW (2200 W) Maximum sheet thickness (mild steel): 8 mm Maximum sheet thickness (stainless steel): 6 mm Maximum sheet thickness (acid-resistant steel): 6 mm Maximum sheet thickness (aluminum): 4 mm Maximum workpiece dimensions (L x W): 3000 x 1500 mm 2x cutting head 5" 1x cutting head 7.5" various copper nozzles

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 14250 kg Control Unit Brand BYSTRONIC Main Drive Laser power 6000watt IPG Number of axis 3 Bwsdjwq Tkwepfx Aaqjw Additional Equipment Incl ByTrans Extended This 3-axis Bystronic BySprint Fiber 4020 + ByTrans Extended 4020 was manufactured in 2014. Ideal for precision fiber laser cutting, this machine ensures efficient operation and consistent performance. Consider the opportunity to buy this Bystronic BySprint Fiber 4020 + ByTrans Extended 4020 fiber laser cutting machine. Contact us for more information. Application Types Cutting

Year of construction: 2005, condition: good (used), Laser power: 5200W Number of hours under power: 37849h Bedpfofci Ecox Aaqsww Cutting time: 26111h Longitudinal stroke X: 3000mm Cross travel Y: 1500mm Vertical travel Z: 150mm Cutting thickness Steel: 20mm Cutting thickness Stainless steel: 15mm Cutting thickness Aluminium: 12mm Charger: Bystrans Extended Resonator

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 7,200 h, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 890 kg, Machine serviced annually by Bystronic Perfect condition - sold to make room for construction of new building. TECHNICAL DETAILS Sheet dimensions: 3,000 x 1,500 mm Cutting range: 3,048 x 1,524 x 70 mm Sheet weight: 890 kg Positioning speed X, Y / simultaneous: 100 / 140 m/min Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Control: ByVision Laser: Fiber 3000 Laser power: 300 - 3,000 W Sheet thickness steel: max. 20 mm Sheet thickness stainless steel/aluminum: max. 12 mm Sheet thickness brass/copper: max. 6 mm Electrical connection power: 21.3 kW MACHINE DETAILS Total length: 11,000 mm Total width: 6,050 mm Total height: 2,565 mm Weight: 12 t Switch-on time: 14,991 h Operating time: 7,187 h Bwedpfx Aovt Rtioaqsw Equipment: cooling unit, safety light barrier

Condition: excellent (used), Year of construction: 2008, Laser ByVention 2200 W Bystronic Year 2008 sheet size 1500x3000mm Sheet fed from the rear of the machine Maximum size of the cut object is about 1500x770mm Bwjdpok E Tp Ejfx Aaqsw The laser is operational, serviced, dismantled and ready for transport

Year of construction: 2017, condition: ready for operation (used), Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Bodovyiqgjpfx Aaqoww

Condition: used, functionality: fully functional, Year of construction: 1986, machine/vehicle number: 02/510/004, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Visitouch 19" 2D, bending force (max.): 225 t, working width: 4,100 mm, stroke length: 265 mm, number of axes: 4, table height: 800 mm, travel distance X-axis: 500 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 100 mm/s, overall weight: 22,000 kg, total length: 2,670 mm, total width: 4,100 mm, total height: 2,800 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 63 A, input frequency: 60 Hz, Equipment: centralized greasing system, documentation/manual, emergency stop, foot remote control, Used press brake with new integrated Visitouch 19" 2D CNC control. Hydraulic punch clamping. Backgauge with X and R axes. Available for immediate delivery. Bwjdpfow I A Ncox Aaqsw

Condition: used, Bending tool, die, upper knife, upper tool, tool for press brake Bwjdpfx Ajd D Hv Nsaqsw -divided -Dimensions: 31.007.2101 -Height: 86 mm -Length: 2x100 mm -Dimensions: 21.002.01.01 -Height: 155 mm -Length: 2x100 mm -Packed: in wooden box -Weight: 11.9 kg

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1054850/10, Vacuum lifter: Bwedpjw Hddyjfx Aaqew Own weight: 80Kg Lifting capacity: 500Kg

Condition: excellent (used), Year of construction: 2016, operating hours: 35,389 h, machine/vehicle number: 16500019, For sale we offer a used bending machine Bystronix Xpert 40/1030. The machine is in very good condition. Is still connected and by prior arrangement can be visited. technical data: Year of manufacture 2016, serial number: 16500019 Operating hours: 35231 / bends 1,315,743 and growing (machine still in operation) 6 axles Xpert 40 Tonnage 400 kN Bending length 1,030 mm Open height 515 mm Standard stroke 200 mm Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Xpert 40/1030 Length 1,520 mm Width 1,584 mm Height 2,449 mm Tonnage 400 kN Bending length 1,030 mm Standard stroke 200 mm Bjdpfxoixl R Te Aaqeww Open height 515 mm Distance between side frames 1,060 mm Table width 60 mm Max. back gauge range X-axis 500 mm X-axis travel 300 mm X-axis speed 1,500 mm/s R-axis travel 100 mm R-axis speed 500 mm/s Z-axis travel 955 mm Z-axis speed 2,000 mm/s Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Main motor power 7.5 kW Weight 4 t The tools (dies and punches) can be purchased for an extra charge. Location of the machine: 89-600 Chojnice Bystronic is still connected and after previous arrangement can be visited and tested. If you are interested, please contact us.

Year of construction: 2006, condition: ready for operation (used), Table dimensions: 3000x1500mm, connected load: 52kW, operational hours counter ca. 28,000h, with Extraction TECHNO FILTER BFK-40 and shuttle table, without necessary software. Bwedpfxohw E Els Aaqjw