Used Casing In for sale (1,946)

Condition: excellent (used), Catalogue number 7248 TECHNICAL DATA - max. workpiece height: 160 mm Laodorf Tahepfx Agzok - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: used, mileage: 11,958 km, power: 240 kW (326.31 HP), first registration: 05/2012, fuel type: diesel, axle configuration: 6x6, color: other, Year of construction: 2012, Equipment: additional headlights, air conditioning, all wheel drive, differential lock, parking heater, This Mercedes-Benz Zetros 2733 A 6×6 will be auctioned online in our vehicle auction on January 16th. Technical details of the vehicle: First registration: 09.05.2012 Chassis number: WDB9490661V220335 Mileage: 11,958 km Drive: 6×6 permanent Condition: Very good, low mileage Note: the exhaust may need to be relocated back to its original position Mercedes-Benz Zetros 2733 A 6×6 – an extremely off-road capable and rugged heavy-duty payload carrier. The vehicle was factory-designed for demanding off-road applications and was subsequently fitted by EMPL with a professional container frame including a fully hydraulic leveling system. Lodpfx Asx E Ukzjgzsak According to TÜV, the Zetros is both technically and visually in very good condition and shows exceptionally low mileage of under 12,000 km. • Engine: 6-cylinder diesel, 7,200 cm³ • Power: 240 kW • Length: 7,390 mm • Width: 2,500 mm • Height: 3,100 mm • Gross vehicle weight: 26,000 kg • Axle loads: 1st axle: 7,500 kg 2nd axle: 9,500 kg 3rd axle: 9,500 kg • Tyres: 395/85 R20 (new tyres in 2016) Modifications & special equipment (EMPL) • Container frame suitable for ISO 20-ft containers • Hydraulic leveling system (four individually adjustable supports) • Control box & emergency control panel • Storage boxes, tool compartments, brackets • Twist-lock container securing • Spare wheel carrier • Protective grilles and reinforced chassis modifications • Full respray in military sand color Equipment (ex-works & special options) • Three differential locks (front axle, rear axle group, longitudinal lock) • Transfer case VG1700 • ABS • NATO jump-start socket • Ringfeder trailer coupling • Webasto Thermo 90 / Air Top 2000 auxiliary heating • ISRI driver’s seat with comfort suspension • Air conditioning • Additional lighting and work lights • 24-volt electrical system, auxiliary tanks Condition & history • Extremely low mileage, practically test operation only • MOT, SP and emissions inspections always passed without faults • Braking system with outstanding measured values • Clean and well-kept interior • No known damages or structural impairments Special advantages of this vehicle • Extremely low mileage • Military heavy-duty platform • 6×6 drive with three differential locks • Professional EMPL custom superstructure • Complete inspection and maintenance history • Ideal for special-body solutions, crisis relief, logistics, or expeditions As shown Function not tested Subject to prior sale

Condition: used, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 20 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Laodpfx Aovrk A Usgzek Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: excellent (used), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measuring system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main unit: Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with stylus holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measuring ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Lasdox A Ur Rspfx Agzek Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probes) Software and Documentation Status MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operation manuals, training folders, training documents Measuring examples, diagrams, technical instructions This software is designed for evaluating contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts Stylus and probe arm sets Precision styluses of various shapes and lengths Replacement needles and mounting tools Stylus holder with protective case Calibration and reference pieces Mahr Contour 2 Block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/inspection sticker visible (valid until 2026) Typical voltage data for the Mahr MarSurf / MidRange / CT series MarSurf CD 120 (Contour measuring unit / axis drive) Supplied via control unit Internal usually: 24 V DC External power supply via MidRange control unit Mahr MidRange control unit (MCP-21 / MCP-22 / MCP-23) This device is the central power supply unit. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Powered by 24 V DC CT120 / Probe systems Sensors operate at low voltage 5–24 V DC Supplied by the main unit (no separate power supply) Accessories, manual control units, interface boxes Usually 5 V or 24 V DC, depending on module Weight: approx. 65–73 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and specifications!) Further questions can be answered by phone.

Condition: excellent (used), Digital external micrometer by the renowned brand Mahr Micromar 40 EWR. Measuring range 25–50 mm with an accuracy of 0.001 mm. LCD display with ZERO, ABS, REL, and TOL functions. IP65 protection rating – dustproof and splash-resistant. Set includes gauge standard, key, documentation, and original case. Technical and visual condition very good. Lodpfx Agjxl Hqdjzsak

Condition: excellent (used), A) Furniture Carcasse (Case) Continous Press Clamp (with CNC) "LIGMATECH" Mod. MDE 110/28/08 - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 - CNC Power Control 22 T - Total installed power Kw 14 - Total length of the machine mm 6220 Machine ables to process furniture cabinets (corpus) with dimensions: Lodelkbn Ijpfx Agzjak - Min/Max Length (Min/Max): mm 250 /2800 - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 280 /1320 B) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000) C) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000)

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander Ljdpfx Aslvtm Ssgzeak - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2001, operating hours: 8,670 h, Serial number: DCH21Bxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21904 Specifications: Certified until 09/2026 Model year: 2001 Hours: approx. 8,670 105 kW Weight: approx. 20,900 kg New complete undercarriage, approx. 150 hours of use Grading bucket Hydraulic grading bucket Klepp S70 quick coupler Track width: approx. 70 cm Machine width: approx. 310 cm New LED lights Radio/CD Climate control/AC Description:Well-maintained Case CX210 tracked excavator for sale with hydraulic grading bucket.Comes with a completely new undercarriage including new idlers, approx. 150 hours since replacement.Delivered originally with rotation hydraulics, 2 pedals and 5 hoses on the stick.Both lift cylinders have been resealed.Recently received a major service with all filters and oils replaced.A lightly used toothed bucket can be included for an additional cost.The machine is certified and ready for operation.Can be delivered on short notice.See video. Lajdjxzyg Rjpfx Agzjk Hours: 8670 Own weight: 20900 Width: 310 Kw: 105 Model: CX210 Beltegraver m/ tilt og pusseskuffe. SE VIDEO

Condition: used, Volume: 1000 l Manufacturer : Olsa Model: – Year: – Quality: stainless steel Capacity: 1000 litres   Stirring: 4,5 KW Motor speed : 710 – 1440 rpm   Internal pressure (bar): unknown, pressure possible Pressure gauge and inside pressure holding valve   Double jacket: yes Heat insulation: yes T°C control hot / cold: solenoid valves   Ledpfxox Avdho Agzjak Note: cleaning of interior marks possible in case of sale

Condition: excellent (used), For sale: complete German-made measurement kit for diagnostics and machine setup, ideal for service, production, and inspection applications. The kit includes: • ROTUX Pocket Strobe™ stroboscopic lamp Lsdpfx Aoupuk Hegzeak • Operating range: 30 – 12,500 FPM (flashes per minute) • Built-in display and adjustment dial • Battery powered (ANSMANN charger included) • Original case with foam insert Additionally: • HOLEX dial indicator 0–10 mm, accuracy 0.01 mm • NOGA magnetic base with adjustable arm • Set of adapters and holders • Mounting elements and cables • All components in excellent technical condition, from a working workshop Manufactured in: Germany Condition: very good, complete set, not worn out ⸻ Ideal for service technicians, precision mechanics, or for monitoring rotational movement, shaft alignment, vibration, or synchronization in drive systems. The ROTUX lamp is a professional tool, not a Chinese replica.

Condition: excellent (used), CATALOG NO. 6916 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - 2 sanding units: Upper: steel roller + pad + steel roller Lower: steel roller + pad + steel roller From above: - Pressure roller, steel - Sanding unit - Sliding pressure roller, steel - Cleaning brush - Feed belt From below: - Feed belt - 2 smooth sliding steel rollers - Sanding unit - Pressure roller, steel - Cleaning brush - Discharge roller Laedpfx Askzkucegzsk - Electrically adjustable sanding height - Pneumatic oscillation of sanding belts - Infinitely variable feed speed regulation - Feed motor: 0.55 kW - Main motors: 2 x 4 kW - Air requirement: 6-8 bar - Extraction ports diameter: 3 x 80 mm, 1 x 120 mm - Overall dimensions (L/W/H): 1800 x 2070 x 2000 mm - Weight: 1422 kg – German manufacture, – unpainted – Very good condition, – used sander Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 1993, Empty weight: 1.350 kg Fabricant : PRB / Marchesini Group Model : Pocket 3 Year : 1993 Type : Case packer Application: packing cases into boxes Manufacturer data: Case features: side a: min. 200 - max. 550 mm side b: min. 120 - max. 330 mm side c: min. 130 - max. 350 mm Lsdpex Au U Sofx Agzsak Case features: L dimension: min. 20 - max. 550 mm l dimension: min. 10 - max. 130 mm height: min. 75 - max. 200 mm Tape characteristics: External diameter max: 220 mm Chuck diameter: 77mm Band width: 30 - 60 mm Weight : 1350 kg

Condition: excellent (used), Catalogue no. 6815 Ljdpfoiv Hh Sjx Agzeak TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: used, Year of construction: 2009, Case packer from 1993 refurbished by the manufacturer in 2009. Automatic packing of boxes with cardboard group by rows and by stacking in a cardboard box with closure. Max. production: 20 to 30 cycles / minute Nordson Problue4 glue generator Label removal Delna DS 14 History, documentation and electrical diagrams available. Spare parts available. Product length 50 - 130 mm Product width 47 - 200 mm Product height 15 - 40 mm Carton length 70-250 mm Carton width 70-250 mm Carton height 40-120 mm Laedpjx Au Avefx Agzjk

Condition: excellent (used), CATALOG NUMBER 6056 TECHNICAL DATA Ljdpfx Agjgig Dyszeak - Max workpiece height: 250mm - Spindle working length: 260mm - Spindle diameter: 40mm - Worktable (LxW): 630x360mm - Guide - Motor power: 9.3kW - 2 pneumatic material clamps - Extraction port diameter: 2x120mm - Air requirement: 8 bar - Dimensions (LxWxH): 1370x980x1620mm - Weight: 450kg – Unpainted – 2 cutters included – Italian-made – Used milling machine, in very good condition Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: used, total length: 2,500 mm, total width: 900 mm, total height: 2,000 mm, Type : Dynamic storage and accumulatio table Dimensions : 250 x 90 x 200 cm Movement : forward - backward for continuous feeding Buffer table between two machines. Lodpfx Agsx Auw Tjzsak Full plastic casing

Condition: excellent (used), CATALOG NUMBER 7153 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper dimensions (H/W): 920x870mm - Output: approx. 110kg/h - Automatic machine operation - Oil cooler - Oil pre-heating - Inspection window - Motor: 7.5kW - Dimensions (L/W/H): 1750x1300x1460mm - Weight: 825kg ADVANTAGES – Unpainted – Italian production Lodpopu Avmefx Agzoak – Used briquetting press – Very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR exchange rate (Prices may vary in case of significant fluctuations)

Condition: used, Year of construction: 2000, 1 – Semi-automatic lower flap folder Manufacturer : Soco System Ledpfxox Auvce Agzsak Model: F-100-P Year: 2000 Carton size :Format carton : Min. carton width : 320 mm Max. carton width: 520 mm Max. case length: 700 mm 2 – Automatic case and flap sealer / Tape sealing machine Manufacturer : Soco System Model: T-400 5-5-7 Year: 1989 Adhesive top and bottom closure. Capacity: Max. 18/min. Carton size :Format carton : Mini: 200 x 120 x 95 Max: 550 x 460 x 470

Condition: used, Year of construction: 2015, Multi-purpose filling line (aluminium and plastic) > Video available on request. Manufacturer : Marchesini Tonazzi Year : 2015 Model : Millenium 200 Type : Automatic Filler – Capper Filling head : 2 units Control panel Dosing and height settings: digital (50 memories) Tube orientation: electronic 40 + 2 tube holder cups Dosage: 3 to 350 ml Ø aluminium tubes: 11 – 40 mm Ø plastic / laminated tubes: 11 – 50 mm Total tube height: 50 – 250 mm System: no tubes / no filling Volumetric dosing unit with two pistons and two cylinders 3-way rotary valves Plunging heads Single-shell hopper Automatic tube ejection PETG casings Cleaning unit: device for cleaning empty tubes using compressed air and dust extraction Inkjet printing on tubes: 1 head Closed-circuit water cooling unit Tube closure, change in 5 min: – Hot air sealing system for plastic tubes – Dual aluminium tube sealing system (single or double fold) Controls : – Hopper product level: electronic – Presence of cap – Print presence check – Tube ejection with wrong code > > Stainless steel lift truck. Hydraulic pump lift Model : Roboplacer TU-751 Type : Robotic tube feeder Three-axis orthogonal robot Lodox Aumuspfx Agzoak Mini box size 400 x 400 mm Maximum dimension boxes 600 x 400 mm Manufacturer : Marchesini Year : 2015 Model : MA 250 Type : continuous cartoner Version L for long cartons Incorrect carton ejection Extended motorised carton supply system Numbering unit with embossing and polypenco roller Two-channel in-line tube carousel Format range : Width A: 25 – 100 mm, pitch 127 mm Height B: 15 – 85 mm Length C: 60 – 150 mm Full documentation available Formats available with the machine : – Tubes: Ø 40 x 200 mm – Cases: 55 x 40 x 220 mm, aeropla – Speed : 150 / min Application : Food industry

Condition: used, Power: 250 kW (340 HP) Tank pressure: 300 bar Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12049 Lajdpjx Aukysfx Agzek  

Condition: used, Year of construction: 2010, Manufacturer: PAGO (Fuji seal) Model: P514B Type: Labeller / Labelling station Year : 2010 Labeling station : automatic application of pharmaceutical labels on the upper side of formed cartons. Wolke printing module Optical sensor print control unit (datamatrix) Case size (min - max) A = 52 - 72 Laedpfx Agox At Eijzsk B = 18 - 60 H = 87 - 95 A + B = 140 Capacity: 225 units/min Documentation available

Condition: used, Manufacturer : CAM Model: AV65 Type: automatic vertical cartoner   Product insertion : manual or automatic (requires modification) Leaflet insertion : available Covers and safety devices Vacuum pump Single shot action module Production speed: 15 – 70 packs per minute Case formats : Lajdpfx Ajx At Dxegzok A – Width: 20 – 115 mm B – Length: 15 – 70 mm C – Height: 50 – 190 mm   Video: ?si=7gBIqcD_U4OJ55p3   Paper documentation available

Condition: used, Complete line for bottles composed of : Depalletizer, unpacker, bottle blower, filler- screw capper, cartoner, carton labeller, case packer and palletizer. Equipment out of production in 2020 Documentation available + lots of spare parts for each machine. 2 formats available. Capacity : 6000 bottles/hour in 370 ml 7500 bottles/hour in 200 ml. Complete line for bottles composed of the following elements: PRB Depalletiser – Destratus R99214 Year: 2004 Installation of PRB in 2004 Depacker / Accumulation table St Gobain Debalpack 800 Year: 1986 NO LONGER AVAILABLE : IMA Mystral - Bottle Blower Y16 LB3023 Year: 2009 Monoblock filling / sealing bottles: IMA Farmomac F370 18VL 8C Filler + screw capper / sealer 3700026 Year: 1987 Refurbished in 2004 NO LONGER AVAILABLE : Flexlink conveyor and accumulation table Year: 2004 Cartoning machine CAM HF 77-8 Leaflet insertion C12031 Refurbished in 2004 SFE carton labeller Laedpfxox Arxzo Agzek PRB Newpocket case packer 931004 Year: 1993 Updated and Refurbished by PRB in 2009 NO LONGER AVAILABLE : Palletiser PRB Ministratus 990224 Year: 1999 Adaptation of PRB in 2004 Batteries of PLCs recently changed. Monitoring table available.

Condition: used, Power: 4 kW (5 HP) Height: 250 cm - Polished stainless steel 316 - diameter 1100 x height 2500 - Double stainless steel casing + painted steel thermal insulation - Stainless steel thickness: 4 - 4.3 mm - Manhole diameter: 500 mm outside flange, 390 mm inside - Porthole diameter: 110 mm - Inlet diameter: 100 mm outside flange, 60 mm inside - Outlet diameter: 60 mm Lsdpfxsx Arw Ds Agzsak - Side entry for temperature measurement - Agitation rayneri din dne 346 tr/mn - propeller d.350 - motor adf 4 kw

Condition: used, Year of construction: 1990, total height: 320 mm, total width: 260 mm, total length: 400 mm, Manufacturer : CERMEX Model: SL2100 Type : Case packer Year: 1990 Automatic machine for grouping and boxing products Side boxing with tape sealing (adhesive tape) Lasdpfxex Arvgo Agzek Adjustable format changeover Previous format : Length: 398 mm Width: 260 mm Height: 315 mm   Mini / maxi cases: to be confirmed according to specifications Mini / maxi cartons: to be confirmed according to specifications