Used Cereal Bar Line for sale (21,960)

Year of construction: 2018, condition: excellent (used), functionality: fully functional, TYPE 318:: COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers following main advantages: - optimal rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height : 3270 mm Kdodewbqx Hepfx Abgsk TYPE 284:: DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE-layer. This secures processing of extremely sticky coated extrudates. Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency. The whole machine is made of rust free stainless steel. The radiation elements are attached to a common carrying arm in the drum. The roasting drum runs on special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion free covering to reduce energy losses. The rpm of the drum is adjustable continuously. The drive is carried out by a three-phase motor 1.5 kW. Drum diameter: 1600 mm Electrical heating power: 126 kW Drum length:4300 mm Drum height : 2960 mm TYPE 361:: COOLING DRUM 1600 For cooling of sticky and hot extruded products under rotation for separation. The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC. Please note: depending on the product characteristics, additional cooling might be necessary for breakfastcereals before the product can be packed. Drum diameter :1600 mm Drum length: 4000 mm Drum height : 2890 mm

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Kdodpfjywztgjx Abgjk Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: used, Year of construction: 2009, functionality: fully functional, AVAILABILITY DATE: APRIL 2026 NP 685 | BARDI RETURNABLE PLASTIC BOTTLES LINE Model: Victoria 5G Year: 2009 Speed: 1,500 BPH Safety protections Cap unscrewer: Kdodpsxl R Utjfx Abgek Bottle-Washer Macero Material of construction: total steel 6 lanes 23 washing stations Filler 6 valves with flow meter Capper (including cork elevator) Single head Type of workable cap: plastic pressure cap Cap size: Ø 55 mm

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, Korthfiber SN 1025 GFRP rebar production line in good working condition. Additional programmable heating for all 4 resin trays. Produces 4 bars from 4-12mm diameter. Larger diameters possible but 1-2 depening on size. Kjdpfx Abjyk Ut Ejgodk Comes with dedicated transformer and power cables. Various types of fibre and resin systems possible.

Condition: ready for operation (used), Festo DGPL-32-900-PPV-A-KF-B linear actuator 161793 – 8 bar, used, in good condition, 100% functional, delivery scope as shown in the photos Ksdpfx Asx Ermaebgsdk

Condition: used, Year of construction: 2000, machine/vehicle number: LC572, Technical Specifications & Performance Data Engineered for continuous olive oil extraction and seamless downstream packaging, this second hand line pairs traditional granite milling with modern separation. It can interface with a used bottling line for edible oil in PET or glass containers, supporting efficient industrial packaging workflows. Throughput: up to 2,500 kg/h (≈2.5 t/h) of olives, continuous duty Year of manufacture: 2000 Condition: READY FOR OPERATION Primary process stages: reception and elevating conveyors, washing/deleafing, four-wheel granite stone mill, malaxation (4 stainless tanks), vibrating screen, Barracane 4015 decanter centrifuge, Alfa Laval final separator (approx. 2000 L), centralized electrical panel Key components (sample): Various Equipment – Barracane 4015 decanter (2000), elevating conveyor, stainless malaxers with gear-driven paste pumps, Alfa Laval polishing separator Container types downstream: PET and glass as standard; compatibility with metal cans possible upon integration Typical oil packaging range downstream: 250 ml to 5 L (format depends on connected filler/capper) Materials in contact: food-grade stainless steel in malaxers, enclosures, and wetted parts Advanced Automation & Control Systems Kdjdpfjw Ag T Aex Abgsk A centralized electrical panel manages motors, pumps, and malaxation temperatures for stable, repeatable extraction. The control architecture supports integration with bottling functions such as rinsing, filling, capping, and labeling for beverage production environments. Centralized start/stop, emergency stops, and status indicators Temperature control for malaxers to preserve organoleptic quality Variable-speed drives for conveyors and pumps to balance flow to the decanter PLC/HMI-ready I/O for line supervision, recipe management, and alarms Electrical supply: three-phase industrial standard (e.g., 400 V, 50 Hz) with protective breakers Production Line Integration Capabilities Designed for easy pairing with downstream oil bottling equipment, the line can feed buffer tanks or directly supply a used bottling line for PET or glass. Interfaces support quick connection to rinsers, volumetric or weight-based fillers, cappers (ROPP, screw), labelers, and date coding/traceability modules typical of industrial packaging systems. Sanitary tri-clamp and flanged connections for rapid hook-up Flexible flow control to match filler speeds and minimize bottlenecking Compatible with conveyors, accumulation tables, and case packing systems Format agility for common edible oil SKUs without major hardware changes Machine Condition & Maintenance History In READY FOR OPERATION condition, this second hand Barracane-based system shows robust mechanical integrity and clean stainless surfaces in process-critical areas. Regular servicing has preserved performance of the granite mill, malaxers, and separator set, allowing immediate deployment and straightforward commissioning within an existing plant. Operational Performance & Versatility The granite stone mill ensures gentle crushing, while controlled ...

Condition: used, machine/vehicle number: LC595, Used complete isobaric glass line for wine - 2000BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling and combines proven European packaging machinery for efficient beverage production. It integrates a filling machine, wirehooder, pasteurizer, case sealer, and auxiliary equipment to support end-to-end industrial packaging operations. Ideal for second hand acquisition, the line offers reliable performance with CE-marked components and a balanced mix of capacities for medium-scale beverage production.Containers: Designed for Glass bottle handlingKey equipment and models: cobert SUPREMA filling machine; ROBINO & GALANDRINO VITTORIA 83 wirehooder; RIVI Engineering mesh pasteurizer 1P; SIAT SM11-S case sealer; OMAC lobe pump; FACCIO G. cork orienterComponent years: 1986 (wirehooder), 1993 (pasteurizer), 2007 (case sealer), 2008 (cork orienter)Pasteurizer capacity indicator: Mesh area 6.5 m²Electrical data (case sealer): 380/415V, 50Hz, 3PH, 1.08A, 260WCompliance: CE markings on componentsAdvanced Automation & Control SystemsThe line is equipped with independent control panels per machine for flexible operation and maintenance. The SIAT SM11-S case sealer features three-phase power and fixed speed controls suited for consistent end-of-line sealing. Emergency stop controls and illuminated indicators are present on operator stations, supporting safe and efficient operation. Quick adjustments on the case sealer and dedicated orienting controls on the cork orienter streamline format setup.Power architecture: Three-phase systems on end-of-line case sealerHMI/controls: Dedicated operator panels on each machineSafety: Emergency stop devices and CE-compliant guardsProduction Line Integration CapabilitiesConfigured for inline operation, the equipment set provides a coherent flow from filling and closure application through thermal treatment and carton sealing. The wirehooder interfaces downstream of bottle closure for sparkling applications, while the pasteurizer integrates within the thermal treatment step. End-of-line case sealing allows seamless integration with upstream conveyors and pack handling.Inline integration between filling, closure application, pasteurization, and case handlingAuxiliary lobe pump supports product transfer and utility circulationCork orienter enhances closure logistics and line ergonomicsMachine Condition & Maintenance HistoryThe line comprises robust, industry-standard machinery known for long service life and maintainability. Components display CE compliance and typical operator safety features. Offered as a second hand configuration, it is presented as ready for operation subject to standard installation, commissioning, and routine checks according to manufacturer guidelines.Operational Performance & VersatilityDesigned for glass bottle beverage production, the equipment supports core processes including filling, wirehood application, thermal pasteurization, and secondary pack... Kjdpfjyhb Ahox Abgedk

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Ksdpfx Asw D E Ubobgjdk Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Year of construction: 2026, condition: new, Complete-turnkey production line for acoustic barrier panels with roll forming, punching and cutting systems. Bosporas Machinery | AYIKA is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. This acoustic barrier panel production line is designed for the manufacturing of high-quality noise barrier panels used in highway, railway and infrastructure projects. The system provides a complete and integrated solution from coil feeding to finished panel output. The line includes hydraulic coil car, hydraulic decoiler, straightener feeder with welding unit, hydraulic press, hole punching system, roll forming machine, cutting system and exit conveyors, ensuring continuous and efficient production. Material Compatibility: CR & HR Steel, Galvanized Steel (HDG), Stainless Steel, and High-Grade Aluminum Alloys Material Thickness (Steel): 0.50 mm – 3.00 mm Material Thickness (Aluminum): Up to 4.00 mm Maximum Coil Width: Up to 1250 mm (Compatible with international standard coil sizes) Coil Weight Capacity: Up to 10 Tons (High-tonnage decoiler integration) Production Speed: Variable up to 30 m/min (Optimized for high-volume manufacturing) Profiling Precision: High-tolerance roll forming with advanced servo-motor technology LINE COMPONENTS Hydraulic coil loading car Hydraulic decoiler Straightener feeder with tail-to-tail welding system Hydraulic press (20 Ton) Hole stamping and notching system Roll forming machine (22–28 stations options) Hydraulic cutting system Exit conveyor system ENGINEERING FEATURES CNC machined robust machine structure High precision roll forming system Servo controlled feeding system Hardened rollers (58–60 HRC) Modular and customizable design Integrated automation system ADVANTAGES Complete turnkey production solution High precision and repeatability Continuous and stable production Short lead time compared to European manufacturers Custom design according to project requirements APPLICATION AREAS Highway noise barriers Railway acoustic panels Industrial sound insulation systems Infrastructure projects OPTIONAL CONFIGURATIONS Different station quantities (22 / 26 / 28 stations) Customized panel design and tooling Automation and control upgrades Integration with coil processing systems Kdodpfx Asyy Spkobgek REFERENCE PROJECTS Images included in this listing represent reference installations of similar acoustic barrier production lines successfully delivered and commissioned in recent years. These projects demonstrate our proven engineering capability and international project experience. Additional references can be shared upon request.

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz Filling product: beer, carbonated beverages, kombucha, functional drinks Filling system: isobaric probe filling with electronic level control Fill range: 12 oz – 24 oz containers Labeling system: cold glue labeling Bottle detection: integrated bottle burst detection system Construction: all stainless steel, high-hygiene design Cleaning: automatic CIP capability Operation: touchscreen HMI with recipe and product management Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) Note: frequency / voltage converter required for non-US markets Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  Depalletizer | KOSME / Semidepal | 2015 Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 Bottle Conveyors | KOSME | – | Included | 2015 Additional Information Manuals included Basic tooling and format change parts for 12 oz and 22 oz included Additional documentation available upon request All conveyance lines included Dismantling team available to supervise reinstallation and recommissioning Utility specifications (air, CO₂ / gas) available upon request Kjdpfx Absyigigegedk

Condition: used, Year of construction: 2001, Overview  This Glass Bottle Bottling Line for Still and Sparkling Water was manufactured on average in 2001 by several European manufacturers, including TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, and others. It is a complete and fully integrated line covering all major production steps such as depalletizing, washing, filling, capping, labeling, case packing, palletizing, and wrapping. The line was regularly maintained, includes newer components, and will be available from July 2025, as it is currently in operation. Technical data  Capacity: up to 12,000 bph Formats: 250 ml, 330 ml, 500 ml, 750 ml, 1000 ml Product: Still and sparkling natural mineral water Neck finish: S294 MCA - 1 Bottle diameters: 170 mm, 205 mm, 218 mm, 259–271 mm, 295 mm Case formats: 250 ml: 24-bottle carton 330 ml: 24-bottle carton 500 ml: 12-bottle carton / 20-bottle plastic 750 ml: 12-bottle carton 1000 ml: 12-bottle carton / 12-bottle plastic Year of Manufacture: various (1991–2016) Scope of Delivery  Depalletizer (TMG VEGA 50, 2001) Uncaser (Zecchetti DE Z 2T, 1993) Bottle washer (Bardi NILO 1 16R, 2001) Filler (Muvitec ECOFILL M24 6 12, 2001; Procomac PR 300232.01, 2001) Carbonator (Muvitec, 2001) Decapper (Grassle REM 20, 1991) Dry air line (Europool TF 03, 2013) Labeling machine (P.E. Labellers MASTER M/S 770/161/8S-SE, 2011) Case former (Siat HM 145, 2001) Case packer (Zacchetti IN Z 2T, 1993) Case sealer (Siat AVV SIAT HM 11-T-Muvitec, 2001) Sealant / hot melt unit (Preo EC5TRA2, 2001) Palletizing robot (ACMI ZX165U, 2002) Stretch wrapper (Robopac TECHNOPLANT 3000PVS, 2016) Silo caps (3 Master ALN600LT, 2001)   Kdsdpfjwhvc Rjx Abgok

Condition: new, Year of construction: 2023, Round tree debarker CAMBIO 45 AIR TEN.CAMBIO 35.VK-450.Debarker will be sold after overhaul.Debarker will be equipped with new generation knives. The machine can be sold as part of debarking lines. Which consists of 1. Table for unbarked logs 2. Hydraulic log splitter. 3. Feed conveyor. 4. Scraper bark conveyor. 5. Outgoing conveyor with log dumper to the left side. 6. Pocket for debarked logs. All equipment is new Ksdpfxsiqi S Nj Abgodk

Condition: good (used), Year of construction: 2009, Line for the production of "B" type energy-absorbing barriers, SIGMA posts and semi-closed channels For 460 x 4.2 mm strip. Weight of the whole set about 25,000 kg. The line includes the following sections: Strip uncoiler with hydraulic jack for new coils. Kedpfst Ak Dpsx Abgedk 1 roller unit + guillotine. Manipulator. Welding area. Rolling section: -rollers for profiling SIGMA post, -rollers for the "B" guide and the semi-closed channel. Bean punching machine. Punching machine for top holes. Punching machine for bottom holes. Controller with display. Instruments for SIGMA post. Instruments for semi-closed channel. Instruments for marking.

Condition: like new (used), functionality: fully functional, UV roller painting line Barberan , DMC , Cefla , Burkle 1300 mm. Kdjdevcmi Ejpfx Abgjk Complete : 1. Barberan roller coater 2. Barberan roller coater reverse 3. UV 1 tube dryer 4. Barberan roller coater 5. UV 2 tube dryer 6. DMC grinding machine . 7. Brush machine . 8. Barberan roller coater 9. UV 2 tube dryer 10. Burkle roller coater 11. UV 2 tube dryer

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES Kdjdpfx Abjthg Disgok ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Kdedpfotiy Ntex Abgek Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: excellent (used), Professional fire-fighting motor pump from the renowned German manufacturer Ziegler (Albert Ziegler GmbH). This device is designed for water transfer—ideal for fire departments, agriculture, construction sites, and industrial applications. Robust, compact build on a transport frame (can be transported with a forklift truck). The pump is in good technical condition and complete as shown in the photos. Technical data: - Manufacturer: Ziegler (Germany) - Model: TS 8/8 - Year of manufacture: 1992 - Output: 800 l/min - Operating pressure: 8 bar - Speed: 4,400 rpm - Engine: petrol/gasoline - Operating hours: approx. 56 h - Weight: approx. 143 kg (ready for operation) - Standard: DIN 14410 / 14420 Condition: - Used - Normal signs of use - Technically flawless and fully operational Scope of delivery: - Ziegler motor pump Kedpfx Absy D An Ssgsdk - Firefighting couplings - Complete set as shown in the photos Additional information: - The price refers to 1 unit of the pump - Sold as shown in the pictures - Can be shipped on a pallet or collected in person

Condition: excellent (used), For sale: professional screw compressor from renowned German manufacturer BLITZ Model: Monsun Pro Eco 15 – industrial unit with excellent build quality, quiet operation, and high performance. Ideal for workshops, production plants, paint shops, and wherever constant and stable air pressure is required. ⸻ TECHNICAL SPECIFICATIONS: • Manufacturer: Blitz • Model: Monsun Pro Eco 15 • Motor power: 15 kW • Working pressure: 10 bar • Capacity: approx. 2.0 m³/min • Speed: 1500 / 3000 rpm • Year of production: 2011 • Power supply: 400V (3-phase) ⸻ OPERATING HOURS: • approx. 17,954 h Kdjdpfxsy A Tp Ro Abgok ⸻ EQUIPMENT: - Control panel - Sound-insulated enclosure - Installation ready for connection - Compact design ⸻ TECHNICAL CONDITION: • Compressor fully functional • Normal signs of wear • Operates correctly ⸻ APPLICATION: • Automotive workshops • Industry • Manufacturing • Paint shops • Service centres

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Kdsdpjynrzbsfx Abgok Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Condition: Good Available: Immediately

Condition: new, maximum load weight: 30,460 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,150 mm, loading space width: 2,410 mm, loading space height: 2,335 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, AGRILINER FL 9150 H2335 ? 51 m3 - F6/C2.2 PUDF - SAF FIX Fifth wheel height, loaded/unloaded: 1170 / 1200 {mm} * SAF axles with disc brakes, 430 mm diameter, ET 120 * Air suspension with conventional control – level control valve * ABS 2 sensors (2S2M) ISO 7638 connector, integrated stability system * Automatic lowering during tipping process * Quick release valve for tipping * Air bellows pressure gauge 10 bar * Make of anti-lock braking system EBS Wabco * Front axle designed as lift axle * Automatic control for lift axle via 6 x 385 / 65 R 22.5 Hankook regional tires * Satin-finished aluminium Speedline rims * TPMS device for monitoring tire pressure and temperature in compliance with R141 regulations * Aluminium drop legs * EC underrun protection, manually foldable * Foldable side underrun protection * Power supply 24524N 2 x 7-pin + 15-pin connectors on bracket * Lighting: rectangular rear lights with bulbs, rear marker lights * Reverse warning signal STANDARD * Side marker lights in LED version * Front marker lights in LED version * 2 additional LED spotlights behind the last axle * HYVA tipping cylinder with eye mounting, stroke 6100 mm, tip-over warning signal * Tipping angle 44°; aluminium body - smooth side walls, inside wall thickness 2.2 mm * Floor thickness 6 mm * Internal width 2410 mm * Front wall 25° angled front, thickness 5 mm * Universal door with double bar locks, foldable upper crossbar * Each door leaf with one grain slide * Pneumatic automatic pendulum frame release with 4 hooks * HYFIX body locking device Kdodpfx Abjy A Ugdogok * Removable access ladder at the rear * Shovel holder / quantity: 2 external shovel holders * Ladder rungs inside the body / position: left front corner * Rolling tarpaulin system: white transparent stripe, side tensioning straps, round aluminium roof bows * Tarpaulin colour mid-grey PVC 650 gr/m * Platform at the front wall / on the front wall * Ladder under the body * Vehicle paint: chassis RAL 9005, body RAL 9005

Condition: new, maximum load weight: 30,460 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,150 mm, loading space width: 2,410 mm, loading space height: 2,335 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, AGRILINER FL 9150 H2335 – 51 m³ – F6/C2.2 PUDF – SAF FIX * Saddle coupling height, loaded / unladen: 1170 / 1200 {mm} * SAF axles with disc brakes, diameter 430 mm, offset 120 * Air suspension with conventional control – level control valve * ABS 2 sensors (2S2M) with ISO 7638 connector, stability system integrated * Automatic lowering during tipping operation * Quick exhaust valve during tipping operation * Bellows pressure gauge 10 bar * ABS brand: EBS Wabco * A-axle as lift axle * Automatic lift axle control * 6 x 385 / 65 R 22.5 Hankook regional tires * Satin-finished aluminium Speedline rims * TPMS device for monitoring tire pressure and temperature, compliant with R141 regulations * Aluminium drop legs * EC underrun protection, manually folding * Folding side underrun protection * Power supply 24/24V, 2x7-pin + 15-pin plug connections on bracket * Lighting: rectangular taillights with bulbs, rear marker lights * Reverse warning signal: STANDARD * Side marker lights in LED version * Front marker lights in LED version * 2 additional LED work lights behind the last axle Kdodpjy A Uf Tjfx Abgsk * HYVA tipping cylinder with eye mount, stroke 6100mm, tipping warning signal * Tipping angle 44° – aluminium body, smooth sidewalls, internal wall thickness 2.2mm * Floor thickness: 6 mm * Internal width: 2410 mm * Front wall: 25° angled, thickness 5mm * Multi-purpose rear door – double rod locks, foldable upper crossmember * Each door leaf with one grain chute * Pneumatic automatic unlocking of pendulum frame with 4 hooks * HYFIX body locking device * Rear access ladder, removable * Shovel holders / quantity: 2 external shovel holders * Ladder rungs inside the body / position: left front corner * Roll tarp system, white transparent stripe, side tension straps, round aluminium roof bows * Tarp color: mid grey, PVC 650 g/m² * Platform at the front wall * Ladder under the body * Vehicle painting: chassis RAL 9005, body RAL 9005

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Main layout attached Kdsdpfjxmr Rrjx Abgjk

Condition: refurbished (used), Handtmann hamburger line + filler FS-510 + VF-830 Kdsdpfxjxniyao Abgok

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Kdsdpfx Asd Ecncebgsk Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Kdedpfx Aetqmwgsbgok Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer