Used Circular Table Saw for sale (48,629)

Condition: excellent (used), CATALOG NUMBER 7513 Technical specifications: - Max main saw blade diameter – without scoring unit: 400 mm - max cutting height: 120 mm - Max main saw blade diameter – with scoring unit: 300 mm - max cutting height: 70 mm - Blade bore diameter: 30 mm - Scoring spindle saw blade diameter: 100 mm - Scoring spindle end diameter: 20 mm Dcjdpjvfp Iisfx Ah Uop - Main blade adjustable up/down - Blade guard - Spindle lock - Sliding table length: 2600 mm - Cutting width at fence: 900 mm - With side table - Main motor power: 5.5 kW – Scoring spindle motor power: 0.75 kW - 2 rotation speeds - Table dimensions: 1200 x 700 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 2600 x 3300 x 1100 mm - Weight: 790 kg ADVANTAGES – German manufacture – Used saw, in very good condition Net price: 9500 PLN Net price: 2260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). Dcedpjvmtdkofx Ah Ujp The price is an already reduced special price. For an additional charge at cost: 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m².

Condition: excellent (used), Altendorf F45 ElmoDrive panel saw, 320 cm sliding table, Vacuum suction cups in the table, Saw aggregate tilting 0-45 degrees, Electronic, motor-driven tilt and height adjustment of saw blade, Right-side fence with motorized adjustment up to 1340 mm, Electronically adjustable 3-axis scorer, Dcodpfxexvc Dhe Ah Usp 5.5 kW vario motor, speed adjustable via frequency inverter, Maximum blade diameter 500 mm, LED lighting for the scorer, Used machine, in very good condition, Few operating hours.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, saw blade diameter: 200 mm, Fully automatic metal circular saw for burr-free cuts and high sawing performance in thin-walled material Manufacturer: Rohbi Series: RKA-86 Control system: Siemens Year of manufacture: 2007 Origin: Switzerland technical data: ----- - High-speed spindle for saw blade 500 - 3,900 rpm (2.0 kW) - Clamping cylinder pneum. 2.000 N - Cutting range round solid material with HSS saw blade: 2-60 mm - Cutting range profiles solid material with HSS saw blade: 60x40 mm - Cutting range round pipe material with HSS saw blade: 2-70 mm - Cutting range profile material with HSS saw blade: 80x40 mm - Material feed carriage max. stroke: 1,250 mm Drive via gear wheel / gear rack - Clamping vice clamping: hydraulic - Minimum quantity lubrication - Saw blade dimensions: 100 - 200 mm (HSS or solid carbide) - Saw blade monitoring via load pick-up - Chip removal via external extraction possible Dcsdpfxotxlxus Ah Ujp - Material removal via retracting chute - Weight: 900 kg Accessories: ----- - Operating instructions - 3x sets of clamping jaws with drawings

Condition: good (used), Year of construction: 2018, saw blade diameter 350 x 32 mm capacity 90 degrees: round 115 mm Djdpfx Ahsxn Anwo Ujcp capacity 90 degrees: square 100 mm capacity 90 degrees: flat 1 x 80 mm capacity 45 degrees: round 100 mm links capacity 45 degrees: round 75.0 mm rechts

Condition: excellent (used), Circular saw Ø 100 to 550 mm, tooth pitch 10 - 40 mm, tooth height 5 to 25 mm, grinding motor 370 Watt/380 Volt, large machine stand for favourable working height, including 2 clamping cones for circular saws with bores from 15 to 85 mm Ø Dcjdpfx Ahslyqthj Ujp

Condition: excellent (used), CATALOG NUMBER 7394 TECHNICAL DATA - max main blade diameter: 380mm - max cutting height: 110mm - main blade height adjustable up/down - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on sliding table: 2560mm - cutting width at rip fence: 810mm - with side table - main motor: 5.5kW - table dimensions: 1250x730mm - blade guard included - overall dimensions (L/W/H): 2580x2570x1050mm - weight: 780kg ADVANTAGES Dcjdpjurkgpofx Ah Usp – German-made – Used saw, very good condition Net price: 7900 PLN Net price: 1880 EUR (based on 4.2 EUR rate) (Prices may change with significant currency fluctuations)

Condition: used, Year of construction: 2018, 5.5 kW main motor, frequency converter (2000-6000 rpm), motorized 2-axis scoring unit with its own drive. Motorized height adjustment in 0.1 mm increments. Motorized angle adjustment in 0.1° increments with digital display. 1090 x 630 mm miter gauge. Narrow and wide extraction hoods with quick-change function. Clamping shoe, sliding block, and manual quick-release clamp. Sliding carriage length 2150 mm (cutting length 2170 mm) - Quick-Scoring equipment packages - Scoring unit adjustable without tools from 2.8 to 3.6 mm - Miter gauge +45° - 45° - On/off switch on the sliding carriage. Dcsdpfevvkm Ujx Ah Usp Storage location: Nattheim

Condition: used, Universal circular saw Schneider type SLS 300, clamping cylinder right, clamping cylinder left, automatic swivel with digital display, motor power 11 kW, cutting height approx. 290 mm, roller conveyor right 5000 mm, roller conveyor left 5000 mm, length measurement: handwheel, length stop with digital display. Djdpfxextxh Re Ah Uocp

Condition: good (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 600 mm, cutting range round steel at 90°: 220 mm, For sale: 1 used CNC fully automatic aluminum circular saw incl. suction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm - Drive power 4.1 KW / 400 V / 50 Hz - Speed 3000 rpm. - Cutting speed 55 m/sec. - Blade dimensions 600 x 50 mm - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm Dsdpfx Aheuyyhas Uocp - Weight 650 kg Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg.

Condition: good (used), Year of construction: 1988, Ulmia table saw Type 1710 S make no. 7270 Year of manufacture 1988 With sliding table With slotted hole drilling table / equipment Swivel saw blade Table extension Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 203 kg Location: ex stock 54634 Bitburg - available immediately - Dsdpfx Ajr Elm Nsh Uocp Request more information

Condition: not inspected (used), for fast, exact cross-cutting of several timbers at the same time, which can be placed next to and/or on top of each other, max. travel approx. 3.3 m, total table length approx. 4.15 m, total table width approx. 0.85 m, max. clamping height approx. 160 mm, max. timber width approx. 220 mm, positioning drive with 2 electric disc brakes, positioning slide can be swivelled upwards, with 2 pneumatic clamping tongs with 4 spring-loaded clamping fingers each from above, 10 clamping tines from below, for self-assembly on a cross-cut saw Dcsdpeiqn D Djfx Ah Uep

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm Dedpfx Ajvwczyoh Ujcp - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: new, Year of construction: 2025, Closed and safe sawing area for more safety due to legally prescribed saw protection device Anti-twist protection of the wood due to stamped barbs in the rocker Stable, torsion-resistant steel frame Trolley for easy transport Shock, scratch and weather resistant due to high quality powder coating Phase inverter Dimensions and weights Djdpfxshkz Hie Ah Uocp Working height 700 mm Rocker support 740 mm Length approx. 1030 mm width/depth approx. 770 mm Height approx. 1095 mm Weight approx. 92,5 kg Drive Type of drive Electric motor with direct drive Electrical data Input power 5 kW Supply voltage 400 V Mains frequency 50 Hz Saw blade diameter 700 mm Cutting capacity Rocker roundwood 250 mm Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Catalogue number H0548 - New machine, in stock Dcodpfx Aedpdcvoh Ujp - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring saw speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm - Width: 3150 mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1992, Format circular saw Altendorf TKR 45, panel saw with scoring unit. Sliding table 1400 mm Main motor 5.5 kW Max. saw blade 350 mm Saw blade tilt and height adjustment hydraulically adjustable Cutting width right 1000 mm Scoring unit Dcjdpfx Ahexllc Es Usp The machine is in good condition. Immediately available.

Condition: new, CATALOG NUMBER RE036 2 axes – electrically controlled lifting and tilting of the main saw blade with electronic height and angle readout, control panel integrated into the machine body – Brand new machine, in stock – Documentation: DTR + CE – Cutting width at the rip fence: 1300 mm – Main motor power: 6 kW TECHNICAL SPECIFICATIONS - Saw blade tilting range: 0–46˚ - Main motor power: 6 kW - Cutting length on sliding table: 3000 mm - Main spindle speed: 3500/4500 rpm - Main spindle diameter: 30 mm - Main blade diameter: 300–400 mm - Max scoring blade diameter: 125 mm - Scoring motor power: 0.75 kW - Scoring unit speed: 8500 rpm - Scoring spindle diameter: 20 mm - Cutting width at rip fence (standard 1050 mm): 1300 mm - Cutting width using stops on auxiliary table: 215–3200 mm - Cutting height for 300 mm blade at 90°/45°: 90/60 mm - Cutting height for 350 mm blade at 90°/45°: 5–115 / 3.5–80 mm - Cutting height for 400 mm blade at 90°/45°: 25–140 / 15.5–95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm - Weight: 750 kg Optional equipment: – Angle guide with aluminum rail – Additional support table – Additional start/stop button on sliding table – Electronic digital cutting width readout on longitudinal fence – Electronic digital cutting width readout on auxiliary table Net price: 49,900 PLN Net price: 11,880 EUR (depending on the exchange rate, here calculated at 4.2 EUR) Dcsdjvvif Njpfx Ah Uop (Prices may change with significant exchange rate fluctuations)

Condition: new, Year of construction: 2025, Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding carriage made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces. The large dimensioned sawing unit made of grey cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground grey cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminium sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminium telescopic stop Angle adjustable Dedpfxscnxams Ah Ujcp With two professional folding fences Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminium sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm working length 1660 mm Cutting height max. 90° with scoring 100

Condition: excellent (used), CATALOG NUMBER 7644 Technical Data: - Max main blade diameter with scoring unit: 350 mm - Max main blade diameter without scoring unit: 450 mm - Cutting height with mounted blade: 100 mm - Main blade adjustable hydraulically: up/down + angle - Electric angle display - Electric height and lateral adjustment of scoring unit - Spindle diameter: 30 mm - Spindle locking - With sliding table - Cutting length on sliding table: 2800 mm Dedjwgdh Sopfx Ah Ujcp - Cutting width at fence: 1440 mm - With side carriage - With scoring unit - Max diameter of scoring blade: 120 mm - Scoring unit spindle diameter: 22 mm - Scoring unit motor: 0.75 kW - Main motor: 5.5 kW - 4 spindle rotation speeds - Electronic speed display - Extraction port diameters: 120 mm, 80 mm - Table dimensions: 1220 x 730 mm - Table dimensions with extension: 1230 mm - Table dimensions with extension: 2070 mm - Saw blade guard - Dimensions (L/W/H): 2940 x 3400 x 1420 mm - Weight: 1100 kg ADVANTAGES – German-made – With scoring unit – Not repainted – Used saw, in very good condition Net price: 29,900 PLN Net price: 7,120 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate changes, the price may change)

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 With sliding table Swivel saw blade Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Dcsdpfjr Elmwox Ah Ujp Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Catalog number: H0561 – new machine, in stock – CE certificate – Austrian production – professional – trolley on steel bars TECHNICAL DATA engine power S1 5500W (/750) voltage 400V / 50Hz table height 890mm extraction connector 100mm sliding table 3200x435mm Dcedpovwlfbjfx Ah Ujp extension table 1200x550mm max. cutting width with gauge 1300mm disc diameter 250-400mm (30) scoring blade diameter 120 x 20 x 3.2-4.2/2.2 mm rotational speed I: 3000; II: 4000; III: 5000 rpm Rotation speed of the scoring saw 8000 rpm Motor power of the scoring saw 750 W Blade tilt 0-45 ° Acoustic power level 90 dB (A) Acoustic pressure level 88.2 dB (A) Overall dimensions of the machine when unfolded L / W / H 3350 x 3600 x 900 mm Shipping dimensions 1350 x 2200 x 1170 mm Net/gross weight 930 / 1110 kg Features: - solid construction - with a large aluminum sliding table and boom, ideal for machining large elements and cutting large, heavy boards to size - cast iron work table (1100 x 700 mm) with table extension (900 x 830 mm) and table extension (610 x 600 mm) with solid steel construction – extension table (1200 x 550 mm) + cutting fence (1950 – 3300 mm) – scoring saw with separate motor – manually adjustable main saw blade angle 0°-45° (using angle indicator) – electric height adjustment of main saw blade and scoring saw Scope of delivery: LEUCO TCT main blade (Ø300 x 30 x 3.2 mm T72) LEUCO scoring saw blade (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – option Net price: PLN 24,300 Net price: EUR 5,750 depending on price EUR 4.20 (Prices may vary with higher fluctuations)

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Dcjdpfxev Erkao Ah Uep Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: excellent (used), Catalogue number 7789 TECHNICAL DATA - Maximum diameter of main blade without scoring unit: 400mm - Maximum diameter of blade with scoring unit: 350mm - Maximum cutting height for 400mm blade: 110mm - Main blade adjustable up/down and angled - Large blade guard - Spindle diameter: 30mm - Brake - With sliding table - Cutting length on sliding table: 3000mm - Cutting width at rip fence: 1420mm - With side table - Fence on side table adjustable at an angle - With scoring unit - Maximum diameter of scoring blade: 120mm - Spindle diameter for scorer: 20mm - Scoring unit motor: 0.75kW - Main motor: 5.5kW - 3 rotation speeds - Table dimensions: 1330x800mm; with extensions/enlargement: 2200x1500mm - Extraction outlet diameter: 100, 135mm - Machine dimensions (L/W/H): 3120x3560x1480mm Dcjdpfx Ajxpvmpeh Ujp - Weight: 1050kg Net price: 12,900 PLN Net price: 3,070 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Year of construction: 2022, Casadei Panel Saw Xenia 40, Year 2022 Robust steel and cast-iron construction ensures precision, smooth running, and durability Smooth-operating, precise sliding table made of anodized aluminum with a proven and long-lasting ball-contact system on hardened guides – 10-year warranty on wear of the carbide guide rails Six-year HOLZKRAFT warranty on wear of the tilting segments of the saw unit Cast-iron saw table Large support surfaces thanks to standard table extension and table widening Fold-down rip fence, manually adjustable with fine adjustment Angle-adjustable crosscut fence, extendable up to 3200 mm, with two flip stops Outrigger with material support roller Dedpexac R Ajfx Ah Uocp TECHNICAL DATA Dimensions and Weights Weight (net) approx. 661 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter (saw blade guard): 80 mm Setup Information Transport width: 1,150 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.9 kW Output power (motor): 7.0 kW Duty cycle drive motor: S6 Duty cycle duration drive motor: 40% Sliding Table and Table Crosscut frame length: 3,200 mm Saw Unit Cutting width with rip fence: 1,270 mm Max. crosscut width to the left of the saw blade: 3,200 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 140 mm Max. cutting height at 45°: 99 mm Saw blade diameter: 400 mm Saw blade speed: 3,700 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 8,500 rpm FEATURES Equipment Scoring unit Anodised aluminum sliding table Handle for sliding table Material roller on crosscut frame Saw rip fence with round bar guide Stops: professional flip stops Table widening Table extension Saw blade pendulum guard Location: ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Catalogue number: 7791 TECHNICAL SPECIFICATIONS - max diameter of main blade with scorer: 350mm - max cutting height: 105mm - main blade adjustable up/down + tilt - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on the sliding table: 1430mm Dcedpfxoxpvk Io Ah Uep - cutting width at rip fence: 1000mm - with side table - with scorer - max scorer diameter: 80mm - scorer spindle diameter: 20mm - main motor: 5.5kW - extraction port diameter: 100mm - table dimension: 115x625mm - table size with extension and widening: 2150x1105mm - blade guard - 3 blade speeds: 3200/4500/6000rpm - dimensions (L/W/H): 2300x3350x1520mm - weight: 746kg Net price: 11,900 PLN Net price: 2,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)