Used Cloos Glc for sale (52)

Condition: excellent (used), Year of construction: 2012, CLOOS GLC 403 Quinto welding machine. A total of nine Cloos 403 machines are available. Year of manufacture: from 2005 to 2012. Other models of the Cloos 503 welding machines are in stock Gbodpfx Ajtkunuoh Eew

Condition: used, Year of construction: 1994, Technical details: welding current - continuous: 40...400 A Length: 900 mm height: 1200 mm total power requirement: 13,8 kVA weight of the machine approx.: ca. 180 kg space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m MIG MAG Welding device -welding transformator as spare part donor - capacity 40A/15V up to 400A/34V - open circuit voltage -58V - characteristic constant - protection type IP23 - isolation type F Gedpfx Aeu Nwx Uoh Ejbw - water cooled Circuit board A5 missing! *

Condition: good (used), Year of construction: 1994, machine/vehicle number: 229, Offer 22437 Gsdpfx Ahep H Tavs Eebw Technical data: - Welding current max. 450 A / 36 V 60% ED - 350 A / 32 V 100% ED - Welding current adjustable in 2x 18 switch steps 60 - 450 A - 2 cycle + 4 cycle regulation , points , interval - 2 roller wire feed steplessly adjustable in separate - wire feeder case CLOSS , CK 68 C - intermediate package machine - wire feed approx. 6 running meters - hose package water cooled approx. 4 running meters - ground cable - pressure reducer - connection 400 V / 19 KVA - space requirement approx. W 490 x H 1200 x D 1100 mm - Weight approx. 180 kg

Condition: used, MIG MAG welding machine, shielded gas welding machine CLOOS Type GLC 357 N MIG MAG welding power source Serial No. 576 Year of manufacture: approx. 1985 Rated output: 350 Amps Output: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Infinitely variable adjustment range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function - External wire feeder type CK 72 ZK with 2-roll drive and 4.5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch Gedpfx Ahehubg Te Eobw - Water-cooled - Pressure gauge for gas cylinder - Welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg

Condition: good (used), Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 Gsdpewubqtefx Ah Eebw -Dimensions: 330/160/H330 mm -Weight: 4.2 kg

Condition: excellent (used), Year of construction: 2018, Very well maintained Quinto 603. Multiple machines of this type are available. Gedpfjw Exytex Ah Eebw

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Gedpfetkuk Rex Ah Eebw

Condition: good (used), Year of construction: 1993, Inert gas welding device, inert gas device -Max. Welding power: 350 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Gas valve -Hose package: 2.8 m -Dimensions: 1100/640/H1090 mm Godpfeb Uw Nrsx Ah Eebw -Weight: 190 kg

Condition: excellent (used), Year of construction: 2003, Cloos GLC 451 C welding machine. Year of construction: 2003 With welding package Gsdpfx Aetkurijh Esbw

Condition: used, Inert gas welding device, inert gas device -Max. Welding power: 320 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder Gbsdpfeb A Hhvsx Ah Esw -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg

Condition: used, Year of construction: 2007, operating hours: 42,000 h, functionality: fully functional, 2 identical systems consisting of: 1 cloos welding robot romat 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot Gbjdpew R T Twofx Ah Eew Gasnozzle sensing, seam tracking, point editor, CTMS, Manax C bow construction for robot in a fixed position Cloos welding machine MC 3 353 ( 350 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: on request . Subject to prior sale. Both systems together will be offered for a special price !!

Condition: excellent (used), Year of construction: 2017, operating hours: 28,400 h, Maximum working area: 10,000 x 4,000 x 3,000 mm Robot arm radius: Ø 4,430 mm Gbodpfx Aexu Udwsh Eow Welding processes: MAG / MIG / TIG Repeatability: +/- 0.1 mm Axes: 2 x 6-axis articulated robots Table type: 2 x rotary tilting tables incl. 2 x counter bearings Table load: 50 kN / 20 kN Horizontal stroke: 14,000 mm Vertical stroke: 1,500 mm – 5,000 mm Programming: Teaching method

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 5668430QC5A, travel distance X-axis: 10,000 mm, torque: 4,000 Nm, TECHNICAL DETAILS Gbodexgqy Eepfx Ah Eew Travel path X-axis: 10,000 mm Moment of inertia: 200 kg/m² Torque: 4,000 Nm Swivel moment: 10,000 Nm Clamping plate size: approx. 1,000 x 1,200 mm MACHINE DETAILS Power (welding wire feeder): 4 kW Power (Cloos QIROX-C QRC350): 40 kVA EQUIPMENT 2 welding positioners (left/right), Type: WPEK-25000N Rotary unit Welding robot, make: Cloos-Bauer, Type: BPF4001/2/4 Welding wire feeder, make: ESAP Extraction unit Rail-guided Separate welding units, make: Cloos, Type: GLC603 Quinto Separate control unit Corrugated sheet metal enclosure with 2 sliding doors

Year of construction: 2018, condition: ready for operation (used), A complete welding system with a robot and peripheral equipment is available. Welding stations: 2, robot travel path: 11000mm, max. workpiece diameter left/right: 2200mm, max. workpiece length left: 4000mm, workpiece length range right: 1000mm-5000mm, welding process: TIG, materials: aluminum/stainless steel, shielding gas: argon, overall system dimensions X/Y/Z: approx. 15350mm/5700mm/4000mm, control unit: Qirox QC2 Advanced. Including suction technology. Documentation available. An on-site inspection is possible. Gsdoxnz Upspfx Ah Ejbw

Condition: used, Cloos Romat 320 robot arm Gsdpfx Asxltxujh Eebw

Condition: ready for operation (used), Year of construction: 2019, Main Drive Max payload 15 kg Media Gbodexcb N Njpfx Ah Eow Power consumption 36 kVA This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Application Types Welding

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Gedpfx Aexvbu Ejh Ejbw Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: used, Year of construction: 2007, table diameter 4520 mm table load 35000 kg swivelling range 110 Grad total power requirement 44 kW weight of the machine ca. / t required space / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 Gsdpfx Ahormulve Eebw 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 The disc ring on the table is a device that is not included in the scope of delivery ----- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH - Turntable diameter: 4520mm - Weight: approx. 25,000kg (without superstructure) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load capacity: 35 tons (according to load chart) Ambient temperature Storage / transport 0 to 60'C Operation +4 to 35 "C Interfaces Central transfer point for control, power supply, earth connection ----- 2.3 Linear traversing unit, LVEB Type LVEB-120000N 4m Dimensions W x D x H 7,700 x 2,440 x 776 mm Weight 4,355 kg Travelling distance 4,000 mm Load of the carriage 120,000 N Drive unit Gear motor Precision bevel gear motor Manufacturer Stöber Type K402VF0250EK703V Power 4.21 kW Voltage UKE 140 V / 1000 rpm Current Rated current IN: 8.32 A Type of current Standstill current I0: 9.04 A Motor speed 3,000 rpm Gear ratio i = 25.28 ----- 2.4 Vertical traversing unit, VVEs Type VVEs-5m Dimensions W x D x H 2,000 x 1,960 x 7,150 mm Weight 9,500 kg Travelling distance 5,000 mm Max. moving mass 18,000 N Drive unit Gear motor Bevel gear motor with brake Manufacturer Stöber Type K713VF0790MQ30ED704B Power 4.8 kW Motor speed 2,000 rpm Gear ratio i = 78.83 (20181/256) ----- 2.5 Cross-travelling unit, QVEB Type QVEB-2m Dimensions W x D x H 1,270 x 4,100 x 756 mm Weight 1,950 kg Travelling distance 2,000 mm Load on the travelling beam 10,000 N Max. moving mass 18,000 N Drive unit Gear motor Precision flat geared motor Manufacturer Stöber Type FS202VQ0145ED402U Power 1.43 kW Voltage UKE 140 V / 1000 rpm Rated current IN 2.86 A Type of current Standstill current I0: 3.1 A Motor speed 3,000 rpm Gear ratio i = 14.65 (3180/217) ----- 2.6 Rotary indexing table Type CR-200kN Manufacturer Cloos Dimensions W x D x H 1,820 x 2,120 x 541 mm Weight 2,850 kg Drive unit Gear motor Bevel gear motor Manufacturer Stöber Type K814VG1540EK803U Power 6.7 kW Motor speed 3,000 rpm Gear ratio i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position 1,900 x 600 x 1,500 mm Weight 205 kg Footprint 500 x 515 mm N...

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11322 - 6759.470QC6, load capacity: 15 kg, arm reach: 1,700 mm, controller manufacturer: CLOOS, controller model: QIROX C, teach pendant manufacturer: CLOOS, input voltage: 400 V, input current: 44 A, type of input current: AC, • Year 2013 Gbjdpfx Ahewcyffs Eew • Ready to weld Aluminium and Steel • Model QRC 350 QIROX • Control cabinet QIROX C – QRC 350 • Linear track of 15 m • Laser camera POWER CAM of SERVO MOTOR CANADA • Touch sensor Quinto • Arc sensor • Wire Barrel • Wire drive unit CK 118 R K CDD • Welding torch MRW 500-35°-78/273 • CDD CLOOS DUO DRIVE • Welding machine QINEO PULSE 450 GLC 403 Quinto II with external cooling (Hot Countries) • Torch clean CMR 7 C DA with wire cutter

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, arm reach: 3,785 mm, type of input current: AC, total height: 6,000 mm, total width: 12,000 mm, total length: 64,000 mm, load capacity: 1,959 kg, Offered for sale is a powerful CLOOS Qirox welding robot system, available from ongoing production. Year of manufacture: 2001 Complete retrofit: 2010 (robot arm, control system, and key components renewed) Availability: From December 2025 Key Features: - Robot: QRC 410 with RIV5A Qirox control system - Laser-assisted seam tracking for precise welding and high repeat accuracy - Two workstations each equipped with a swiveling rotary-tilt table (360°): Table 1: Load capacity 1.5 t Table 2: Load capacity 2.5 t - Large gantry providing access to both workstations - Additional axis: 1200 mm vertical, robot movable - Required installation space (HxWxD): approx. 6 × 12 × 6.4 m Retrofit 2010 (excerpt from documentation): - Rotrol I (V4A) cooling module 500 W incl. cabinet preparation & cooling unit - PC coupling Rotrol side, RI option from V04 - 15" TFT display (RI option from V05) - Arc sensor - Software extensions: • Point editor in robot control system • Parameter interpolation (travel-dependent transition between parameter lists) - Fiber optic PHG cable extended to 15 m - External encoders for WPV 50 + 75,000 N - Base plate adapter R310 to Qirox Welding technology: - QINEO CHAMP 450 CW with integrated water cooling - Seam tracking unit - VSP 15 m, QWD-A wire feed drive, OMI or CAN-Bus (where available) - BSP 3.5 m, RPU Premium with 10 m cable - Integrated connection control incl. power supply Godexgudzepfx Ah Ejbw Included in delivery: - Welding robot - Gantry - 2x table - Fume extraction unit - Comprehensive accessories - Documentation Condition & Delivery: - Technically flawless, regularly serviced by Cloos customer service - The system is in active production until December and can be inspected while in operation. Afterward, it will be disassembled, loaded, and shipped upon request. Numerous additional photos and demonstration videos available Inspection by appointment possible Loading, transportation, and recommissioning can be arranged Price and further details on request. For inquiries or to schedule a viewing, we are always available. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Godpoxvbw Hofx Ah Eebw Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Cloos welding robot ROMAT 320 with ROTROL II control system incl. Gas nozzle sensor, arc seam tracking, hard disk, point editor, 16 I/O, programming pendant with 8 m cable base stand for robot mounting with robot accessories Welding machine Quinto II 403, wire feeder, mechanical cleaning, pressure amplifier, DUO drive wire feed 1 welding torch MRW 380, 1 torch hose package Gjdpfx Aoxghrroh Esbw initial equipment for steel 1.2 mm, torch test gauge torch holder with safety shut-off diagonal axis 1 safety for 2-station operation, robot standstill monitoring connection cable for robot control as well as manipulator control, length 5 m 2 start preselection panels incl. cable, 2 light barriers intermediate control integrated for the 2 L manipulators WPEK 5000, load capacity 500 kg, swivel radius approx. 800 mm Special price for disassembly by week 46

Condition: new, Year of construction: 2024, Training system consisting of: 1 welding robot Qirox QRC 350 including control unit, programming handset, 24 V buffering, computer interface (PC side cabinet), 2 GB flash drive Gas nozzle sensor, arc seam tracking, multilayer welding technology, spot editor, Qineo Next 452 with premium control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, Floor rail 20 kN, travel path 6 m, robot is mounted on a C-frame in suspended position. Gbedpocmbnyjfx Ah Eow 2 turning device with counter bearing TC 5 kN, load capacity 1000 kg, clamping length 3.0 m, interface control, 4 light barriers, 2 start preselection Delivery time: 6–8 weeks Warranty: 24 months

Condition: excellent (used), Year of construction: 2011, Cloos Qirox robot QRC 320 incl. control unit V 6, Offline laser ( instead of gas nozzle sensor for fast search process, arc seam search, spot editor Quinto II 603 welding machine (600 A pulse machine), wire feeder, 1 workpiece manipulator HWR 30000, 2 workstations, pick-up weight per station 2500 kg, face plate distance 4500, turning radius 750 mm Floor track with C stand, travel distance 4 m, for suspended arrangement of the robot Light barrier, start preselection Option: conversion from 320 to 350 ( enlargement of working area possible) Gbodpfx Aheizklne Esw

Condition: refurbished (used), robot mechanic for Exchange. Mechanic overhauled by Cloos. Gbodsd H T I Espfx Ah Esw Mechanic on stock.