Used Cnc Boring Machine for sale (65,189)

Condition: used, Year of construction: 2020, Vertical CNC machining center Manufacturer: Homag Type: Optimat BHX055 Year of manufacture: 2020 Technical specifications Workpiece length: 200 - 3,050 mm Workpiece width: 70 - 850 mm Workpiece thickness: 12 - 60 mm Milling spindle: 1 Main spindle power: 5 kW Max. speed: 18,000-24,000 rpm (depending on configuration) Fedpfe Aiubhex Am Ejgi Tool holder: HSK-F63 or ETP25 Tool changer: 4-position magazine Vertical drilling spindles: 13 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Dado saw: X-axis Control system: Homag powerTouch / Power Control PC 86 Software: WOODWOP 7.x Total connected load: 11.5 kW Compressed air requirement: 7 bar Machine weight: approx. 1,580 kg Installation dimensions (L x W x H): approx. 2,950 x 1,984 x 1,895 mm CE marking Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10641 Manufacturer: HERMLE Type: C 1200 V Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain TNC 430 Fsdpfo Ahmvuex Am Ejgi Storage location: Halberstadt Country of origin: Germany Machine-No.: 193XXXX X-Travel: 1200 mm Y-Travel: 900 mm Z-Travel: 500 mm Tool Taper: HSK 63 Tool changer: 30 Spindle Speed: 16000 RPM Weight Of The Machine Ca.: 14 t Further information: The machine can be viewed while it is powered on, subject to prior arrangement.

Condition: used, Year of construction: 2013, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact P 6001.20 Year of manufacture: 2013 Working area: 2,000 x 6,000 mm 1 x plasma torch with HiFocus 161i power source Fgedpfxs Ahx Sts Am Eji with automatic gas console and Contour Cut Extraction table 41126ä

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Fgjdjzc D Aaopfx Am Esi Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Condition: good (used), Deckel FP4 MK Milling Machine Technical Data: Travel distances X/Y/Z: 500 / 400 / 400 mm Spindle taper: ISO 40 Spindle speed: 50–2,500 rpm Digital position display: 3-axis Heidenhain TNC 113 Tool clamping: Hydraulic drawbar Fjdpfs Aggg Djx Am Esgi Drill chuck: 90 mm stroke Universal rotary table: Type 2038 Cooling: Coolant system installed Accessories: Including machine vice Machine weight: Approx. 1,700 kg

Condition: used, Year of construction: 2007, Morbidelli / SCM Author X5 44 EVO, manufactured in 2007. 5-axis CNC machining center with a console table and vacuum clamping system. Working area X × Y during milling: 4,400 × 1,780 mm Console depth: 1,500 mm Milling and drilling operations Tool magazine and automatic tool changer Separate control panel with screen and handheld device Vacuum pump Machine weight according to the nameplate: approx. 5,000 kg Xilog Plus 1.13.988, as shown in a screenshot from 2023. Fgodpfx Amo Ahzqae Eoi Expected availability from December 2026. Images from 2023 and April 2026; PC/software photos and video recordings from 2023. Scope of supply and viewing by appointment. Price upon request.

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Fgodpfswuz Ekox Am Esi Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008176, X axis working area: 3050 mm Fodpo Ahwxzefx Am Eegi Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 25 Total number of tool changer positions: 4

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Fodsz Iyvpjpfx Am Esgi

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Work in X, Y, Z axes Working area 3100 x 1340, Z axis = 180 mm Horizontal drills on X axis – 6 pcs Fgsdpfx Ams Ahwgnj Esi Horizontal drills on Y axis – 4 pcs Vertical drills on X axis – 8 pcs Vertical drills on Y axis – 6 pcs Two tool magazines: side – 11 positions and transfer – 14 positions Grooving saw on X axis Spindle 8 kW, air-cooled, 600–24,000 RPM, HSKF63 Becker Vacuum Pump 2.2 kW Option for dual-field operation X axis speed – 25 m/min (programmable) – 56 m/min (vector) Y axis speed – 50 m/min (programmable) – 56 m/min (vector) Z axis speed – 15 m/min

Condition: good (used), Year of construction: 1990, 1 used, well-maintained CNC tool milling machine, traveling column design, with CNC path control GRUNDIG Dialog 11 Table size 1600 x 675 mm Tool holder SK / ISO 40 Travel distances X-axis, longitudinal 1200 mm Y-axis, transverse 600 mm Z-axis, vertical 500 mm Table load 2000 kg Spindle speed range 20 – 6300 rpm Feed rate range, stepless 2 – 10,000 mm/min Rapid traverse in all axes 10 m/min Quill stroke 80 mm Drive power 100% ED 7.5 kW 40% ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Control cabinet weight 470 kg Fgjdehhuf Hjpfx Am Eei Accessories / Special features: • CNC tool milling machine suitable for tool and fixture manufacturing, training, and mold making • CNC path control GRUNDIG Dialog 11 • Screen graphics, dialog-guided input, 3D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets, even with islands, shifting and rotation of the coordinate system • Electronic handwheel • RS 232 interface • Swiveling vertical milling head +/- 90° • Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system • Quill adjustment 80 mm • Horizontal milling attachment • Full protection enclosure • Ball screw spindles in all 3 axes • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2014, Parts shown by hand not come. Fgjdpfxoz U Tiks Am Eoi

Condition: good (used), Year of construction: 2001, Ref. -No.: 10665 Manufacturer: GLEASON - PFAUTER Type: G 320 Fgedpfo Ahmwgox Am Eji Year of construction: 2001 Type of control: CNC Control: Siemens Numerik 840 Storage location: Halberstadt Country of origin: USA Machine length: 3700 mm Machine width: 2400 mm Machine Height: 2750 mm Workpiece Weight Max.: 380 kg Weight Of The Machine Ca.: 11,5 t Travel -X Axis: 230 mm Travel -Y Axis: 135 mm Travel -Z Axis: 200 mm Max table speed: 240 1 / min

Condition: used, Offered is a CNC portal machining center with multiple clamping. Equipped with a large clamping table, several workholding fixtures, numerous hose connections and protective curtains on the machining portal. Inspection possible by arrangement. Fsdj Agwqajpfx Am Esgi

Condition: used, Year of construction: 2020, 5-axis CNC machining center Manufacturer: Houfek Type: Scorpion CE21RA Fgodpfx Amo Aiubds Eoi Year of manufacture: 2020 Technical data - Workpiece size: 3200x2100x150 mm - Travel ranges X / Y / Z: 3900 / 2750 / 350 mm - Rapid traverse X / Y / Z: 70 / 70 / 35 m/min - Spindle: HSD ES 779 L 6P, 22 kW, max. 24,000 rpm HSK A63 - Drilling unit: 36 drilling spindles, grid 32 mm, stroke 70 mm, 1.7 kW (3 pcs.), drill chuck D = 10 mm (side screws) - Chain tool changer: 60 tools, max. length 180 mm, max. 100 mm, max. 3 kg, servo motor - Disc tool changer: 21 tools, max. length 150 mm, max. 150 mm, max. 5 kg, servo motor (additional controlled axis) - Vacuum table: Grid table (nesting), 8 zones, controlled via the control panel - Additional connections: pneumatic 4x pairs 6 mm (external clamping elements), vacuum 4x pairs 12 mm (templates, fixtures) - Machine accuracy: 0.1 mm / 1000 mm - Repeatability: 0.05 mm - Flatness and squareness X, Y, Z: 0.1 mm / 1000 mm - Electrical connection: 3/N/PE 400 V, 50 Hz, rated current 117 A, control voltage 24 V DC, IP 54 - Compressed air: min. 7 bar, approx. 300 l/min Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, table width: 400 mm, table length: 800 mm, overall weight: 5,300 kg, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, CNC Milling Machine HURON VX8 NVU TECHNICAL SPECIFICATIONS: - Date of manufacture: November 2021 - Power-on hours: approx. 9 758 h - X-axis travel: 820 mm - Y-axis travel: 510 mm - Z-axis travel: 510 mm - CNC control: HEIDENHAIN TNC 620 - Max. spindle speed: 10 000 obr/min - Table dimensions: 800 × 400 mm Fodpfx Amo Aifm To Eegi - Tool magazine capacity: 24 tools - Chip conveyor - EUROCOLD H2021P473 cooling unit - 3-jaw lathe chuck - 2 HILMA NC 160 machine vises - Machine weight: approx. 5 300 kg The machine is in very good technical condition, connected to power and available for inspection and testing on site by prior appointment. Professional loading is included in the price. Accessories, tools and clamping devices shown in the photos are included in the offer only if explicitly listed under equipment. Technical specifications are provided for reference only and may contain inaccuracies. The machine is subject to prior sale.

Condition: new, Year of construction: 2026, OPMT Light 5X 40V-I 5-axis CNC laser machining center for PCD/PCBN tools Condition: New machine CNC control: NUM Axes: 5 X-axis: 450 mm Y-axis: 450 mm Z-axis: 350 mm B-axis swivel range: ±125° Rapid traverse rate X/Y/Z: 30 m/min Machining speed: 20 m/min Positioning accuracy X/Y/Z: 0.005 mm Repeatability X/Y/Z: 0.003 mm Laser power: 100 W Max. tool diameter: Ø 200 mm Max. tool length: 350 mm Max. tool weight: 25 kg Tool holder: BT-50 / HSK-63 Work table: 620 × 500 mm Connected load: 25 kVA Operating voltage: AC 380 V ±10 % Fgodpfj Ahr Dtjx Am Eei Compressed air: ≥ 7 bar Dimensions (L × W × H): 2,400 × 1,600 × 2,600 mm Machine weight: approx. 4,500 kg

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Fgedpo Ahkyajfx Am Eoi Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC-Steuerung Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Fgsdpfx Ae Ahkw Hjm Eji Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: new, Year of construction: 2026, The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1500x3000mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Included with the Milling Machine Becker KVT 3.140 Vacuum Pump Manufacturer: TechnologieCNC Fgedetu S Sropfx Am Eoi Model: 1530 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in slow passages: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1500x3000x300mm - Hybrid table (vacuum+T-slot) Control: NK-105 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Dimensions: For transport - 365 / 210 / 220 Machine assembled and ready to work - 365 / 245 / 230 Hybrid table, i.e. vacuum table enabling non-invasive element fixing, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller A tool height sensor is included A central oil lubrication system for trolleys and guides as standard The drive is transferred via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Fjdpfj Afwinjx Am Eegi Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: good (used), Year of construction: 2004, Ref. -No.: 10634 Manufacturer: ANAYAK Type: P 3200 Year of construction: 2004 Type of control: CNC-Steuerung Fgodpfx Amo Ahmvqj Eji Control: Heidenhain Storage location: Halberstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 1400 mm Z-Travel: 750 mm Table-Size (Lxw): 3200 x 1400 mm spindle running time: 23.291 H Control: 83.301 H machine: 73.907 H Program run: 27.807 H

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2507, Used CNC bed milling machine / traveling column milling machine with automatic tool changer and swivel head. Manufacturer: TIGER S.p.A. (Italy) Fodpezffnusfx Am Eogi Type: TFA 5 RT Year of manufacture: 2002 Serial number: 2507 The "RT" designation at Tiger indicates a version with a rotary table or 5-axis machining capability. Heidenhain CNC control (probably TNC 426 or TNC 430) Automatic tool changer Tool magazine Tiger TFA 5 RT ISO 50 tool holder Swivel milling head Bed-type machine with a large working area Full enclosure Tool changer Weight 650 kg Connection 400 V / 50 Hz Power output 45 kW Maximum current 80 A Technical data X-axis travel 2,500 mm Y-axis travel 1,200 mm Z-axis travel 1,200 mm Table size 1,000 x 1000 mm Tool holder ISO 50 Spindle speed 2,500 rpm Main drive 45 kW Number of tool positions 60 Machine weight 12,000 kg

Condition: used, Mitutoyo Type: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture 2017 – including software & accessories For sale is a high-quality Mitutoyo QS250Z CNC Vision Measuring Machine from 2017, in very good condition. It is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics technology, and more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: 2D coordinate measurement Contour and profile measurement Measurement of distances, radii, angles, and diameters Measurement of holes, grooves, edges, and complex geometries Serial measurements with automated measuring programs Documentation and report generation via Mitutoyo software Measurement is performed non-contact using a high-resolution camera system with image processing. Ideal for sensitive or small components where tactile measurement is not suitable. Thanks to CNC control, automated measuring sequences are possible – perfect for recurring testing processes. Technical data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): approx. 150–200 kg Important note: “The table shown in the photos is not included in the sale.” Fgsdpoynkbajfx Am Esi Condition: used Scope of delivery: (See image) Mitutoyo QS250Z main unit Joystick box Software package: QS-ConfigDisk QSPAK FORMTRACERPAK-AP MiCAT Vision / Form Manuals & documentation Various electronic circuit boards (see images) Other accessories as shown (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1990, Ref. -No.: 10544 Manufacturer: DECKEL Type: KF 2 Year of construction: 1990 Type of control: N/A Control: N/A Storage location: Halberstadt Fgodpj Ahmu Eefx Am Eji Country of origin: Germany Power Capacity: 1,6 / 2,0 kW Tool Taper: 20 mm Ø Space requirements: 1600 x 1350 LxWxH (mm) Feed rate: 0-350 mm / min Vertical portal passage, clamping table - lower beam cross member: 300 mm Distance table - spindle nose with vertical milling spindle: 50 mm Distance table - spindle nose with horizontal milling spindle: 450 mm Machine Height: 1950 mm Weight: 2,1 t Pre-milling spindle: 80...1000 min-1 Collets: 20 O taper bushing: Morse 1 Touch lift: 12 O Speed of the milling motor: 1400 RPM Further information: - Optical testing device - Pre-milling spindle - Model milling device - Rotary table - Inclined spindle - Mirror image milling device - Reduction and enlargement device - Roller engraving devices - Machine vice hydraulic clamps - Auxiliary clamping table - Dividing head - Tool cabinet - Clamping claws - template bars - articulated light The machine can be viewed under power by arrangement.