Used Cold Buffet for sale (1,503)

Year of construction: 2025, condition: new, machine/vehicle number: 405899413, MARINI USM 600 MAX MOBILE COLD AND SOIL MIXING PLANT Year of manufacture: 2020 Condition: New Lrjdpfxjhd I R No Aacjw - Production capacity: up to 600 t/h - Cement: up to 10% - Water: up to 10% - additives: 5% - batchers: 4 - vibrators: 2 - can width: 3,2 m - Capacity: 10 m³ - Weighing system: individual load cell per batcher - Mixer type: continuous mixer - Outlet opening: with electric / hydraulic drive - Control: automatic and manual Input errors and mistakes in this offer are expressly reserved. Only the specific agreements in the order confirmation or in the purchase contract are decisive. more construction machines and mixing plant on our website Further information Purpose: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length Ljdpfx Asfg Rlboacorw •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis

Condition: used, saw blade diameter 350 mm cutting diameter 90 mm Lrjdpfjd Il Azsx Aacow stroke 160 mm mitter cutting - all-position ± 45 ° voltage 380 V weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,85 x 1,35 m - S/N: 4296 - pneumatic feed - coolant equipment

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: M30E/9002, Offer Number: M30E/9002 Machinetype: cold nut former Info: bushing cut-off Lodpfx Aswi T Uteacorw Make: LIAN SHYANG Type: LS-C-NF-14B6LS PKO Constr. year: 2007 diameter range: 16 mm number of dies: 6 number of stations (incl. cut off): 7 cutting length: 20 mm speed ppm: 120-140 PKO length (max): 18 mm press power: 100 to Location: Europe

Year of construction: 1975, condition: excellent (used), daylight width: 70 mm speed: approx. 15 m/min working direction: any Lrjdpop E Efvsfx Aacjw work roll diameter: 80 mm

Year of construction: 1991, condition: used, Volume: 15 hl Ledpsw Tml Ejfx Aacerw Periphery: Pump

Condition: good (used), Year of construction: 2002, machine/vehicle number: Egli V1, Make : EGLI Model : V1 Usage : Frozen Block cutter for butter and similar products High speed Cutter Electrics : 3~ / 400 v/50hz Air : 6 bar -8bar Safety Door with air operated actuator Lrodpjfmgv Hofx Aacew The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo .

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min Ljdpfxjt Eafnj Aacjrw total power requirement 1,8/2,2 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m SPECIAL PRICE!!! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: used, Year of construction: 1975, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 45 degrees: round 100 mm capacity 90 degrees: flat 150 x 110 mm capacity 45 degrees: flat 120 x 100 mm engine output 1,8 / 2,6 kW 500 mm weight 450 kg dimensions ca. 1100x710x1850 m Semi-automatic vertical cold circular saw with pneumatic clamping and feed device Lrodpjw Nrvbjfx Aacew 4 saw blade speeds (2 via motor / 2via gearbox: 11/22/44/88 rpm integrated coolant pump

Condition: excellent (used), functionality: fully functional, Specifications: Saw motor 1.1 / 1.4 kW Saw blade size 300 x 40 mm Saw blade speed 1,400 / 2,800 rpm Miter angle steplessly adjustable 45 - 90 – 45 degrees Lrsdpjxf Uamsfx Aacsw Cutting area profile, 90° Round / Square 80 / 70 mm

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any work roll diameter: 120 mm Lrsdpfxep E Egls Aacsw barrel length: 150 mm backup rolls: backup block/chain

Condition: used, Length: ca. 2.6 m Width: ca. 1.7 m Height: ca. 2.3 m Features: Cooling unit (Technobloc, type: ACN050U, output: 0.7 kW, refrigerant: R404a) Ljdpow Tmlljfx Aacerw

Condition: good (used), Year of construction: 1977, functionality: fully functional, saw blade diameter: 350 mm, rotational speed (max.): 35 rpm, Cold Circular Saw Eisele VMSIII-PV 038 Year 1977 with 1.6m roller conveyor Coolant system with pump Saw blade 315mm Power supply 400V 16A Motor power 2 / 2.6kW Automatic cycle: vice close, down/up, vice open Requires compressed air 4-6 bar for pneumatics Mitre cuts 30-90° possible Speeds: 17 and 34 rpm Ledovv Nvzspfx Aacjrw Max saw blade diameter 350mm Weight approx. 550kg

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm Ljdpfofg Rlcjx Aacsrw capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: used, mileage: 314,081 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 3,250 mm, overall weight: 3,200 kg, first registration: 09/2014, loading space length: 2,930 mm, loading space width: 2,050 mm, loading space height: 1,500 mm, emission class: euro5, color: white, driver cabin: day cab, number of seats: 2, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, Performance/Engine: 2,143 cm³, with turbocharger Transmission: 6-speed Axles: 4x2 Brakes: ASR, disc brakes Cab: tinted windows, electric windows, electric exterior mirrors, outside temperature display, audio system radio Refrigerated body: Cold Car, insulated bunker doors/ice, 3 doors on the left, 3 doors on the right, fixed partition wall Cooling unit: eutectic storage cooling, cooling down to -33°C Other features: power steering, immobilizer ID 117902 Ice refrigeration body Cold Car, insulated bunker doors/ice, 3 doors left, 3 doors right Electronic Stability Program (ESP9i) Front axle stabilizer Hill start assist Battery management Radio Heated and electrically adjustable exterior mirrors Over-windscreen storage 6-speed manual transmission ECO Gear Wheelbase 3250 mm 3.5 tonner Seatbelt warning for driver’s seat Gearshift indicator Service interval display ASSYST Adaptive brake light Daytime running lights Emission class Euro 5b+ N1 Engine OM 651 DE 22 LA 70 kW (95 hp) 3800/min Cruise control Spare wheel Driver airbag Smoker’s package Fabric upholstery Tunja black Weight variant 3,200 kg Video: Video: Plate cooling is a cooling system that uses eutectic plates to maintain an appropriate temperature level. The passive plates are connected to the power grid (220V) overnight. The freezing point of the eutectic solution is -33°C. The eutectic plates serve to maintain the temperature of already frozen products. We always have a wide selection of used refrigerated and ice cooling vehicles in stock. More offers can be found at Non-binding offer, sale only to commercial customers, errors and intermediate sale reserved Advertising and company logos on vehicles may have been digitally altered in photographs. Ledpfxeu Drzgo Aacjrw

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Lrsdpfjh A S Htjx Aacjw Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm Lsdpfx Aaop E Ed Recerw

Condition: new, Year of construction: 2025, Saw Diameter: 500 mm Lsdpsxdciajfx Aacjrw Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.

Condition: good (used), functionality: fully functional, Head swivels +/- 90° Pole-changeable motor 1.7 / 2.2 kW Saw blade size max.: 275 mm Cutting speed approx. 40 / 80 rpm Miter steplessly adjustable 90° left and 90° right Cutting capacity approx.: 90° Profile, square / round: 75 / 80 mm Estimated weight approx. 400 kg Lsdpfx Aajxc Dwpjcjrw Space requirement (W x D x H) approx. 0.7 x 0.85 x 1.75 m • 2 pieces of double round-column guided vices, laterally adjustable • Saw head swivels 90° to both sides Longitudinal cuts possible! See picture.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,38 t Ljdjfgpdlepfx Aacjrw dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right.

Condition: used, mileage: 290,405 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 3,250 mm, overall weight: 3,200 kg, first registration: 07/2014, loading space length: 2,930 mm, loading space width: 2,050 mm, loading space height: 1,500 mm, emission class: euro5, color: white, driver cabin: day cab, number of seats: 2, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, Performance/Engine: 2,143 cm³, with turbocharger Transmission: 6-speed Axles: 4x2 Brakes: ASR, disc brakes Cab: tinted windows, electric windows, electric exterior mirrors, outside temperature display, audio system/radio Refrigerated body: Cold Car, bunker/ice doors, 3 doors on the left, 3 doors on the right, fixed partition wall Refrigeration unit: eutectic plate cooling system, cooling down to -33°C Other features: power steering, immobilizer ID 117881 Ice cooling body: Cold Car, bunker/ice doors, 3 doors left, 3 doors right Electronic Stability Program (ESP9i) Front axle stabilizer Hill-start assist Battery management Radio Heated and electrically adjustable exterior mirrors Over-windscreen storage 6-speed manual transmission ECO Gear Wheelbase: 3,250 mm 3.5-tonner Seatbelt warning device for driver's seat Shift point indicator Service interval display ASSYST Adaptive brake light Lsdpfov Dy Ahsx Aacorw Daytime running lights Emissions class Euro 5b+ N1 Engine OM 651 DE 22 LA 70 kW (95 hp) at 3,800 rpm Cruise control (TEMPOMAT) Spare wheel Driver airbag Smoker's package Tunja black fabric upholstery Weight variant: 3,200 kg Plate cooling is a cooling system that uses eutectic plates to maintain an appropriate temperature level. The passive plates are connected to the power supply (220V) overnight. The freezing point of the eutectic solution is -33°C. The eutectic plates serve to maintain the temperature of the already frozen product. We always have a wide selection of used refrigerated and ice cooling vehicles in stock. You can find more of our offers at: Non-binding offer, sale only to commercial customers, subject to errors and prior sale. Advertisements and company logos on vehicles may have been digitally edited on photos.

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Lredpfxsd N H A Ns Aacow Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15+30 oder 30+60 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Lrjdjuay Drepfx Aacew SPECIAL PRICE!!! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Ljdpfx Asquzd Reacerw Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift Ljdpfxeuz If Ne Aacorw - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.