Cold store buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
Cold store door, cooling door -Schiebetuer -without Veriegellung Pass 1800 x 2500 mm Door 1880/2530 Przkem Door thickness 75 mm Transport dimensions 2700/2100/H100 mm Weight 226 kg more
15
Gastro profile Ltd. & co. KG Fischbach 11 35418 bus corner Opening hours: Mon-Fri: 09:00 to 13:00 and 14:00 to 17:00 SA: After agreement Cold store of the brand - manufacturer de Rigo New price about €17000 gross Year of build 2016 Technical data: W x D x H: CA. 4200 x 5400 x 2600 mm Power supply: V: 400 Description: This cold storage has a panel of 90 mm in thickness, the floor is made of non-slip, convoluted stainless steel covering. The door has a door heater, which however is not... more
5
Used cold room / Konfiskatkühlung GÜNTNER -Cold room with room divider - control: CAREL mastercella connected - refrigeration GÜNTNER, 2 insulated doors of EMS - with Konfiskat entry hatches was the cold room for cooling and storage of Konfiskat used. A tour is like possible by arrangement. More information on request. Bb9d27qbex more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbvrabzbhb Scotchman CPO 315 RFA NF Automatic Cold Saw --The roll feed type automatic cold saw excels over other hitch types at longer cuts. Equipped with a vise and pinch roller, the part is advanced until it hits a positive stop and saw operations commence. -- This saw is designed for cutting non-ferrous metals. For cutting of harder metals, a different high torque, lower RPM version would be needed. -- Rectangular cutting capacity: 3" x 3" (76mm x... more
6

Coldsaws KALTENBACH SKL450E Non Ferrous upstroking Saw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
2001
ready for operation (used)
Serial No. 122156 Blade size 450 mm Capacity 160 mm diameter, squares 145 x 145 mm, rectangular 320 x 50 mm. Saw head swivels 90 - 0 -90 degrees Input 415/3/50 3.7 kw Feed rate 0 - 3000 mm / min Djkb9wr Fitted with 3 m infeed roller tracking with measuring length stop, and 3 m outfeed roller tracking. Length 4' 2" Width 4' Height 6' 8" Nett weight actual. 1,100 Kgs / 1.08 Tons more
5

Cold Circular Saw Kaltenbach HDM 1430

Köln, GermanyGermany dealership location
6416 km
1994
used
saw blade diameter:1430 mm cutting diameter:1200 x 420 mm stroke: mm sawing motor:10/16 kW Kbrlt0d7 feed:0-400 mm/min more
1
Eisele KMS 90 Fully functional from an Ausbildungseerkstatt Saw blade diameter 275 mm Cutting capacity at 90 degrees: approx. 90 mm Cutting capacity at 45 degrees: approx. 90 mm Cutting capacity at 90 degrees: square Max 120 x 75 mm Cutting capacity at 45 degrees: square 80 x 75 mm Speed range 40 / 80 U/min Number of 2 speed drive motor 1.0 / 1.4 kW Motor speed 1.420/2,850 Rev/min Voltage 380 V / 50 Hz C0wznhq Machine weight approx. 150 kg more
4

Cold Circular Saw KALTENBACH HDM 800

More Kaltenbach Hdm 800
Mönchengladbach, GermanyGermany dealership location
6371 km
1970
used
saw blade diameter:800 mm cutting diameter:250 mm stroke: mm capacity 90 degrees: flat:500 x 170 mm capacity 90 degrees: square:220 mm feed speeds:1 - 1000 mm/min total power requirement:10 kW weight of the machine ca.:3,1 t dimensions of the machine ca.:2,1 x 1,2 x 2 m Ughchsddo more
5
hydraulic for cutting - cold saws for cutting saw -Double - cold saws links up to 45 ° right up to 45 ° angle adjustment-hydraulic-Vorschub hydraulic Cutting area -90 ° 640 x 210 mm -45 ° 410 x 210 mm Roller conveyor with stop rail 7000 mm Hhulromzy Foundation plate more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Nccjv MIDWEST CP 410-L-15-3 Cold Press (Hydraulic); Overall Platen size: "51" x 120", with 3 - Upper Platens: 39" x 51" each. -- Side loading on 120" side, upper platen with zone controls to allow use as 4' x 10' press. -- This press, has a 19-1/2" max. down stroke, with a 39-3/8" max. daylight adjustable load opening, that uses (3) down stroke hydraulic cylinders pistons for pressure control. -- This unit generates 15 tons of hydraulic pressure over t... more


cold store
daily

New machines via email!

Stay updated!
2

Coldsaws KALTENBACH Coldsaw, 220mm Capacity

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Blade size 710mm Capacity Rounds 220mm Automatic Yes Hydraulic Yes Input 380/420/3/50 ac 10 hp approx Speeds 6-26 Metres per Minute Stroke of feed vice 1000mm Feed rate 03-20mm per Second Fitted with 2 x Hydraulic Horizontal Clamps, Swarf Conveyor Length 11' / 3.35m C0nhgm9 Width 7' / 2.13m Height 6'8" / 2.03m Nett weight 3.2 ton / 3290 kgs more
2

Cold Circular Saw Kaltenbach RKT 760

Köln, GermanyGermany dealership location
6416 km
1994
used
saw blade diameter:760 mm cutting diameter: mm stroke: mm total power requirement:5 kW weight of the machine ca.:3,2 t dimensions of the machine ca.:2,3 x 2,15 x 2,1 m Ss07bw The cold circular saw RKT 760 has a maximum saw blade diameter of 760 mm, but it is also possible to use a saw blade in the size of 710 mm. This Kaltenbach saw has a saw blade feed speed of 0 - 1200 mm / min and is infinitely adjustable, the rapid retract fast has a feed speed of 3500 mm / min. The cutting speed with 710 ... more
Eisele KMS 90 C0nihtp Fully functional from an Ausbildungseerkstatt Saw blade diameter 275 mm Cutting capacity at 90 degrees: approx. 90 mm Cutting capacity at 45 degrees: approx. 90 mm Cutting capacity at 90 degrees: square Max 120 x 75 mm Cutting capacity at 45 degrees: square 80 x 75 mm Speed range 40 / 80 U/min Number of 2 speed drive motor 1.0 / 1.4 kW Motor speed 1.420/2,850 Rev/min Voltage 380 V / 50 Hz Machine weight approx. 150 kg more
3

Cold Circular Saw TRENNJAEGER UNI 16-10

Monheim, GermanyGermany dealership location
6405 km
used
saw blade diameter 520 mm cutting diameter 135 mm profile width 400 mm turning speeds 3000 U/min. Dc2gp2kd8 capacity 90 degrees: round 110 x 2,0 mm capacity 90 degrees: square 30 x 30 mm capacity 90 degrees: I 110 x 110 x 9 mm total power requirement 7,5 kW weight 0,5 kg range L-W-H 0,9 x 1,1 x 1,2 mm hydr. Height Adjustment more
8

TruStore 3030 with double towers TRUMPF TruStore 3030

Neuenstein, GermanyGermany dealership location
6666 km
2013
excellent (used)
Year: 2013 Tension: 400 V Frequency: 50 Hz Connected load: 13 kVA Compressed air commection: 7 - 14 bar Capacity per pallet: 3.000 kg Sheet format: 3.000 x 1.500 mm Dimension: approx. 7.022 x 6.181 mm Hjcuy9hbc System height: approx. 4.970 mm Total pallets: 29 places frontal on-/out stock cars with scissor Stock undercarriage to load for SheetMaster incl. safety device CELL-Server (warehouse management) more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Sszznc 50" x 244" End Loading, Segmented, Bag press with motorized daylight opening. -- (2) Individually actuated, 50" x 122", segmented platens. -- Single air bag per platen with approx., 50 PSI specific pressure. -- Motorized adjustable daylight opening from 9" to 56". -- Side loading with (2) rows of spring loaded pop-up rollers in lower platen for easy loading/unloading of the press. more
4
saw blade diameter 300 mm cutting diameter 95 mm Cipp7i2 capacity 90 degrees: round 95 mm capacity 45 degrees: round 95 mm capacity 90 degrees: flat 125 x 90 mm capacity 45 degrees: flat 95 x 85 mm saw blade turning speeds 20 + 40 U/min work height max. 900 mm mitre right / left total power requirement 1,6/2,1 kW weight of the machine ca. 240 kg dimensions of the machine ca. 620 x 580 x 1600 mm Condition: ready for operation Electric 380 Volt Cooling equipment Base unit Machine dea... more
3
Dt8imgp9s Used saw blade for circular saw Typ Peddinghaus LC 1250 special offer - as long as stocks last - subject to prior sale - 1 x segment saw blade D = 1224 mm number of teeth per segment Z6 condition approx. 50% from new 3 x segment saw blade D = 1225 mm number of teeth per segment Z6 condition approx. 60% from new 1 x segment saw blade D = 1230 mm number of teeth per segment Z6 condition approx. 70% from new 1 x segment saw blade D = 1230 mm number of teeth per segment Z5 condi... more
1
saw blade diameter 300 mm cutting diameter 90 mm stroke 100 mm cutting range max. 170 x 70 mm mitter cutting 90 - 30 ° turning speed range 10 / 20 / 40 / 80 U/min voltage 380 V total power requirement 2,0 kW M8z92 weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 1,00 x 1,70 m - [...]: 095-7412 - automatic feed (pneumatic) stepless adjustable - miter - coolant equipment more
2

Cold Circular Saw OMES MEC 300

Bremen, GermanyGermany dealership location
6424 km
used
saw blade diameter:max 300 mm cutting diameter:100 mm stroke: mm 9dcscfsb7 capacity 90 degrees: flat:130 x 100 mm vice: jaw width:200 mm saw blade turning speeds:40 + 80 U/min engine output:1,3 / 1,7 kW total power requirement:1,8 kW dimensions of the machine ca.:0,7 x 0,7 x 1,4 m weight of the machine ca.:ca. 400 kg more
2
saw blade diameter 400 mm cutting diameter 130 mm Iqgq93z capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 220 x 80 mm feed length 600 mm feed length: multiple 1800 mm cutting speed 10 / 20 m/min total power requirement 2,6 kW weight of the machine ca. t dimensions 2,47 x 1,17 x 1,96 m - adjustment of mitre cutting stepless +/- 60° with DRO - Accessories: roller track 1000 mm long with length stop more
1
Elect./Voltage: AIR POWERED Biczybtq TYLER 804 Air Pod Press; Overall Platen dimension of 50" x 100", with (4) individually controlled top platens - each 25" X 50". -- Side loading on 100" side. -- 0 - 50" Manually adjustable daylight. -- Pneumatic top pressure via 5-1/2" stroke air pods by (32) 8" Air Pods with maximum 50 PSI specific pressure. -- Spring loaded rollers in bottom platen for easy loading & unloading of stack. more
3

Cold Circular Saw WENIG FHC 370

Bünde, GermanyGermany dealership location
6460 km
2001
used
saw blade diameter 370 mm cutting diameter 115 mm capacity 45 degrees: round 110 mm cutting range rectangle 150 x 100 mm Capacy 45°: rectangle 100 x 100 m/min. turning speed range: 17 + 34 UpM total power requirement 1,5 / 2,3 kW weight of the machine ca. 300 kg dimensions of the machine ca. 1,15 x 0,7 x 1,9 m Electric 380 Volt Bbebxfhgcn Cooling equipment Base unit Little used miter cold saw for cutting left and right 45 °, pole-changing motor. Machine dealer with own stock of 2500 m²... more
5
hydraulic for cutting - cold saws for cutting saw -Double - cold saws links up to 45 ° right up to 45 ° angle adjustment-hydraulic-Vorschub hydraulic Cutting capacity 90 ° 650 x 240 mm Lh9xt Section 45° 440 x 240 mm -programmierbarer digital stop stroke length 8000 mm Stroke is hydraulically raised and lowered -2 x electrically powered runways Swiveling control panel more
5
Metal circular saw Kaltenbach Type HDM 750 Saw blade diameter 750 mm With various replacement blades Machine can be demonstrated under power. Cutting range 90 °: round 250 mm square: approx. 220 mm flat iron: approx. 450 x 170 mm cutting speed: 9/18 m / min Feed speed: 0-900 mm / min stepless Dimensions approx. 1050 x 1900 x 1560 mm weight: CA. 2.7 tons Accessories: Hgldlss2k Coolant system Various saw blades Further data according to photos more
3

Cold Circular Saw EISELE KMS II-061

Krefeld, GermanyGermany dealership location
6378 km
1981
used
saw blade diameter 275 mm cutting diameter 120 x 75 mm capacity 90 degrees: square max. 120 x 75 mm capacity 45 degrees: square max. 80 x 75 mm turning speed range 40 / 80 U/min no. of turning speeds 2 drive motor 1,0 / 1,2 kW motor speed 1420 U/min capacity 90 degrees: round 90 mm capacity 45 degrees: round 90 mm total power requirement 380 V / 50 Hz Yrq8lbkvt weight of the machine ca. 0,5 t dimensions of the machine ca. 1,5 x 1,5 x 2,0 m • Cold Circular Saw - Vertical • coolant • length s... more
6

Cold Circular Saw KALTENABCH RKT 631 HC

Göppingen, GermanyGermany dealership location
6699 km
1986
used
saw blade diameter 710 mm cutting diameter unbkt. mm stroke unbkt. mm total power requirement kW weight of the machine ca. t Cxsncmlzk dimensions of the machine ca. m more
1
Elect./Voltage: PNEUMATIC Dvho9kb FERGUSON 2.5 x 18' Cold Press - Pneumatic;31.5" x 218" End loading segemented air bag press with Fixed Daylight opening of 54". -- (3) Individually actuated, 31.5" x 48", 31.5" x 120", 31.5" x 48" segmented platens. -- Pods with approx., 50 PSI specific pressure. -- Equiped with: (2) Rows of pop-up rollers in lower platen for easy loading/unloading of the press. more
3
digital lenghtstop ELGO for coldsaw for example Kaltenbach, Eisele, Adige Dnlza0ulk 1. rollerway 3,20 m x 0,80 x 0,80 m with 3 m digital lengthstop, one side feet 2. rollerway length 2,50 m without feet more
5
Cold saws, metal cutting circular saws, metal cutting saw Bagdj3nsoq -Max saw blade ø 315 mm-with coolant system Blade speed 40/80 U/min Cutting range 90 ° flat 100 x 75 mm cutting capacity 45 ° flat 40 x 75 mm-schwenkbar Dimensions 1030/560/H1700 mm Weight 222 kg more
5
1 x used Katlkreissäge Manufacturer: Rurack Type: C 450 Year of construction: 1994 Weight: 1.3 to. Technical data: Digital Max 230 mm Bevel on both sides Bbisxv2yfa Leaf: 450 mm Adjustable stroke double-sided access hydraulic little went Terms of delivery: free loaded terms of payment: prior to pick-up more
3
saw blade diameter 350 mm Bwtgjcx cutting diameter 100 mm mitre joint cuts -/+ degrees 45 ° total power requirement kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,1 x 1 x 1,8 m • pneumatical clamping device more

Cold Rolling Machine GROB ZRM 12 NC-DR-A890

Düsseldorf, GermanyGermany dealership location
6394 km
2004
used
root circle diameter 79 - 230 mm Ht9eybb8o centre height 1215 mm roll head turning speed range 1400 U/min x-axis 2 x 95 mm feed speeds infinitely variable 0 - 18000 mm/min rapid speed 18000 mm/min workpiece spindle stepless 500 U/min required air pressure 6 bar total connected load 71 kW control SIEMENS 840D Dimensions (L x W x H) 10 x 4,5 x 3,4 mm Total weight, approx. 16 to Machine designed for operations on thin wall hollow parts with external/internal gears, internal gears, cluth disc... more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. 2q7cga 3-Section side loading Press. With (2) top platens in each of the (3) pressing sections, very well suited for high pressure pressing or bending and was previousely used in a skatebopard factory. -- (2) Platens are 26" x 88"; (4) platens are 26" x 96" with 4" added onto each end of (4) platens. This can be seen in the pictures. -- Each top platen equipped with (3) 8" dia. hydraulic cylinders that can handle up to 2,000 PSI line pressure which gener... more
5
saw blade diameter:400 mm cutting diameter:140 mm stroke: mm saw blade turning speeds:08/16/32/64 U/min capacity 90 degrees: round:140 mm capacity 90 degrees: square:120 mm :200 x 120 mm capacity 45 degrees: round:140 mm Bcmxt0v7k2 capacity 45 degrees: square:120 mm capacity 45 degrees: flat:140 x 120 mm :110 rechts mm capacity 60 degrees: square:100 rechts mm :100 x 100 rechts mm dimensions of the machine ca.:1,2 x 1,2 x 1,8 m total power requirement:2 / 2,6 kW weight of the machine ca.:0,8 t ... more
4
Bright cold light lighting system for macroscopic applications, lamps, luminaires, lighting -for ultra high speed films N7nceajr -Extrem high light output of up to 2.3 million lux per capita (20 cm working distance) -No thermal stress of illuminated objects more
5

Cold Circular Saw Kasto GKS 400

Köln, GermanyGermany dealership location
6416 km
1990
used
saw blade diameter:400 mm cutting diameter:140 mm stroke: mm Bccsqepqd8 total power requirement:5 kW weight of the machine ca.:1,6 t sawing motor:1,6 / 2,5 kW min. workpiece diameter:10 mm cutting length min.:10 mm minimum remnant length (90 ° cuts):100 mm cutting speed:11 / 22 m/min more
3

Cold Circular Saw HUVEMA HU 275 PCK

Krefeld, GermanyGermany dealership location
6378 km
2013
used
saw blade diameter 275 mm cutting width 70 mm Cutting height 85 mm Cutting height at 45° 70 mm cutting capacity - flat 95 x 60 / 90° mm cutting capacity - round 85 / 90° mm Oqbci7cb cutting capacity - square 70 x 70 /90° mm cutting capacity - flat 70 x 55 / 45° mm cutting capacity - round 70 / 45° mm cutting capacity - square 60 x 60 /45° mm saw blade turning speeds 60 + 120 U/min voltage 400 V / 50 Hz Motor output 1,0 / 1,4 kW machine weight ab. 250 kg Dimensions (L/W/H) 980 x 790 x 780 mm ... more
6

Cold Rolling Machine GROB ZRM 12 NC-DR-A890

Düsseldorf, GermanyGermany dealership location
6394 km
2004
used
root circle diameter 79 - 230 mm centre height 1215 mm roll head turning speed range 1400 U/min x-axis 2 x 95 mm feed speeds infinitely variable 0 - 18000 mm/min rapid speed 18000 mm/min workpiece spindle stepless 500 U/min required air pressure 6 bar control SIEMENS 840D total connected load 71 kW Cm87myfy Dimensions (L x W x H) 10 x 4,5 x 3,4 mm Total weight, approx. 16 to Machine designed for operations on thin wall hollow parts with external/internal gears, internal gears, cluth disc ... more
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. C0nhx9p TYLER 805 Air Pod Press; 98" X 62" overall platen dimension. -- Side loading on 98" side. -- Motorized adjustable daylight 6" to 60" in 4" increments. -- Pneumatic top pressure via 5-1/2" stroke air pods, 80 PSI specific pressure. -- (7) pop-up rollers in lower platen for loading & unloading. more
1
saw blade diameter:400 mm cutting range round:130 mm cutting range square:120 mm cutting range flat:315 x 40 mm saw blade feeds adjustable stepless:0 - 1200 mm/min. rapid return speed of the saw-blade: mitre equipment:180 Grad throat until the centre of tailstock:420 mm back gauge - adjustable by rack:150 mm total power requirement:1,7 / 2,6 kW Lutpt weight of the machine ca.:850 kg dimensions of the machine ca.:900 x 1100 x 1900 m 1 used cold circular saw KALTENBACH KKS 400 with following eq... more
4
Cold saws, metal cutting circular saws, metal cutting saw 22klw8hz Saw blade diameter max 250 mm Max diameter 80 mm Burr free cut Counter Water cooling dimensions 1200/800/H1450 mm Weight 534 kg more
5

Cold Rolling Machine GROB 95 M

Staufenberg, GermanyGermany dealership location
6540 km
1973
used
max. workpiece diameter:470 mm workpiece diameter:470 mm max. distance spindle nose and rollerhead carrier:2150 mm min. [...] nose / chuck:1950 mm max. length of teeth cutting:400 mm rollerhead dia. max.:115 mm no. of teeth (continued procedure):12 - 96 no. of tooth single indexing:12-96 feeds -stepless-:40 - 240 mm/min rapid traverse:1800 mm/min total power requirement:18,5 kW weight of machine approx.:10000 kg E2rwkygsm dimensions with soundproof cabinet:4000 x 2250 x 2000 mm Cold Rolling ... more
3
Bauhjahr: 08/2015 16 free programmable buttons dimensions: B: 675 x T: 570 x H: 985 mm electrical connection: 2800 W / 230 Volt fresh water connection: 3/8 in. 6 containers for protein pot circuit standard bucket elevator for 400 disposable cups of quick clean igen and filling automatic Becher and Cup detection automatic rinsing device of coin-operated vending standard MDS, EXECUTIVE and BDV EVA-DTS are supported data transfer via SD card or USB interface with acrylic glass front and lighted Fot... more
5
saw blade diameter 450 mm cutting diameter 10-160 mm stroke 5-1200 mm feed stepless 0-18 mm/sec total power requirement 7 kW weight of the machine ca. 2 t B2ov33oa dimensions of the machine ca. m Cutting lengths can be set from 5 to 1,200mm Sawblade feed, infinitely variable 0 - 18mm/sec Material feed speed 10 - 300mm/sec Accessories / Special Features: - Built-in coolant equipment. - Infinitely variable settings of feeds, hydraulic. - Complete Covering more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbuu8wuvm8 Used YAMAMOTO Single-opening, premium quality, cold press. -- 500 Tons Pressure Capacity. -- Daylight is 60". -- Press Platens are 54" x 108". -- Dual chain carry-thru with cylinder jump. -- (2) 14" pressure cylinders and (2) jack cylinders. more
6
Vintage Heavy cold Embossing Stand Roll Machine, Made in Germany, Ygfhsjdv Lots of accessories and spare parts, look pictures. for embossing single sheets. up to 80cm Pictures, book covers, posters, menu cards , Birthday cards , business cards, advertising etc. Fully Functionally! more
5
Cold saws, metal cutting circular saws, metal cutting saw -Max saw blade ø 275 mm-with coolant system Bbm0rfeiqv Blade speed 30/60 U/min Cutting range 90 ° flat 100 x 75 mm cutting capacity 45 ° flat 40 x 75 mm-schwenkbar Dimensions 1455/875/H1590 mm Weight 224 kg more
5

Cold Rolling Machine EX-CELL-O XK 351

Staufenberg, GermanyGermany dealership location
6540 km
1984
used
max. wheel diameter: mm rolling capacity max.: t workpiece diameter:aussen / ext. 60 mm gear width: mm max. module: workpiece length:1220 mm min. module: Etapu87 total power requirement: kW weight of the machine ca.:13,5 t dimensions of the machine ca.:3,43 x 2,2 x 1,88 m more
10
Here we offer a white cold heat test Chamber. Name: SB22/300/80 Cold heat mode: 75... + 180 C ° Climate operation: + 10... + 95 C ° Humidity range: 10... 98% r. H. Temperature rate of change: Cool down: approx. 3.1 K / min Heating: approx. 3.0 K / min Prüfraurn volume: approx. 300 litres External dimensions: height 1700 mm width 800 mm, depth 1620 mm, Prüfraurn dimensions: Height 680 mm, width 540 mm, depth 820 mm Weight: approx. 360 kg / power consumption: 5.8 kVA The port value is ... more


cold store
daily

New machines via email!

Stay updated!

to

to

Edit search
COLD STORE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close