Used Cold Store for sale (3,149)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA08, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) Gjdpfx Aisz Ipdcjhjuh F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges Gedpfx Aioz Iprtsheuh FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones Godpfx Aiezuygqshsuh • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, functionality: fully functional, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, CraneMasterStoreLinear S-DOWN 1530: A loading and unloading device offering an efficient connection between the machine and the storage system. It makes the automation of storage, logistics, and loading and unloading of material and cut parts, including the associated offcuts, even more efficient. It offers all the automatic functions expected of a CraneMaster system, such as efficient loading of material from the storage to the cutting machine's pallet, and simultaneous unloading of cut parts to the storage or to a discharge station. The system is recommended for manufacturing and service companies expecting the highest performance, with production ranging from low to medium or high volume. Additional Options: - Automatic sheet separation - Automatic sheet thickness measurement - Anti-collision system - Automatic grate cleaning system - Gripper adjustment system - Additional conveyor for cut parts - Independent control of suction cups Gsdezrfy Djpfx Aiheuh - Double the number of suction cups - Precise measurement of the weight of the storage tower eTower 240 sheet storage system – This is an automatic sheet storage system that works with the loading and unloading system of the CraneMasterStore or CraneMasterStoreLinear laser cutting machine. The eTower2 material storage system consists of a storage column, which also functions as a transport column, with an elevator moving within it. The elevator's task is to move shelves between the storage columns and the loading and unloading locations. In addition, the system is equipped with a movable external loading and unloading station.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS07, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets Godpez Inbysfx Aihouh - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: excellent (used), mileage: 337,403 km, power: 120 kW (163.15 HP), first registration: 08/2018, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 80 l, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 7, suspension: steel, number of seats: 2, total length: 6,900 mm, total width: 2,300 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 3,500 kg, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, onboard computer, power assisted steering, power mirror, seat heater, soot filter, traction control, Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Transmission Transmission: 7Gtronic, 7 gears, Automatic Axle configuration Tyre size: 195/75R16 Brakes: disc brakes Front axle: Max. axle load: 1850 kg; Tyre profile left: 70%; Tyre profile right: 70% Rear axle: Max. axle load: 3500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40% Weights Empty weight: 3.545 kg Carrying capacity: 1.455 kg GVW: 5.000 kg Functional Maximum cooling temperature: 40 °C Make of bodywork: Coldcar ice/ eiswagen Cooling engine: electric Wall thickness: 10 mm Environment Emission class: Euro 6d Maintenance, history and condition APK (MOT): New APK (MOT) upon delivery Technical condition: very good Visual appearance: very good Identification Registration number: 14-BLG-1 Gedpfx Aoz Dbxkoiheuh Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Adaptive Cruise Control - Climate control - Heated door mirrors - Immobilizer - Keyless Go - Leaf spring suspension - Multifunctional Steering Wheel - Particulate filter - Radio/Cd/Audio system - Rain Sensor - Side door - Spare wheel - Speed limiter - Standby 380V - Twin wheel axle = Remarks = Very nice and well-maintained Mercedes Sprinter 516 CDI BlueTEC Euro 6D GVW 5,000 kg Coldcar / Ice cream truck COC available Deep-freeze capability: -40°C 8 compartments GVW 5,000 kg / Payload 1,455 kg Internal dimensions: L 404 cm / W 200 cm / H 120 cm Cooling system works perfectly; tested down to -40°C 337,000 km (verifiable)

Condition: new, empty load weight: 7,214 kg, maximum load weight: 31,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,625 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, color: white, Year of construction: 2026, Equipment: ABS, Unladen weight: 7214 kg, permissible total weight: 39000 kg, certificate DIN EN 12642 (Code XL), cargo space (L W H): 13,625 mm x 2,480 mm x 2,700 mm, cargo space volume: 91 m³, air suspension, underrun protection, lift axle, electronic braking system EBS, bolted chassis, connection plug 1x15 and 2x7 pole, anti-splash guard, telematics system, tire pressure monitoring, you can find our entire vehicle range at [website address]. Would you like financing? With our Value Added Services, we offer you individual financing options, full-service and telematics services. We will be happy to advise you. Guodpfx Aioz R H Thjhoh

Condition: used, This listing is for BioCold BIO110FZSS Spark Free Underbench Laboratory Freezer The unit is in full working condition and ready for immediate use The BioCold BIO110FZSS is a 110 litre underbench laboratory freezer designed for general laboratory storage at approximately -20°C. It features a spark-free interior, reversible door, four removable solid baskets and an operating range of -18°C to -23°C. External dimensions are approximately 845 x 545 x 570 mm and weight is 39 kg Transparency Report and Technical Audit: Software and Media Disclosure: Guodpfx Asz D Hmgeiheh As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: new, Year of construction: 2026, overall weight: 420 kg, total length: 31,000 mm, total width: 16,800 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This Profiline TP pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our Profiline TP is a semi-automatic stretch wrapper with up to 32 storable programs that guarantee absolutely consistent results. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. As part of the programs, you can also set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 420 kg, this model is designed for loads of up to 1200 kg. Our Profiline TP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. If the wrapper wrapper is to be used at a different location in between, it can be easily moved by means of Gedpfx Ajz E Ik Njiheuh can be easily lifted and moved with a forklift truck via integrated cut-outs. This model is our recommendation if you are looking for a professional & robust pallet wrapper for larger quantities that takes up as little space as possible. Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: You will receive a 24-month warranty with this machine. On request, we can also offer you a suitable loading ramp, a photoelectric cell for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby fully eliminating the “human factor.” As space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system – these are the advantages of this machine, put in a nutshell! The electromagnetic brake allows you to precisely store the film tension for each program step (foot wrapping, upwards wrapping, head wrapping, downwards wrapping). Within the parameters of each program, you can also adjust the speed of the film carriage and turntable. Head wraps, foot wraps, and film overlap at the pallet end can each be programmed individually. This way, you can store customized programs for every packing scheme to achieve optimal wrapping results. Programs can be password-protected so that operators can only select from pre-set programs. Weighing 500 kg, this model is designed for loads up to 1200 kg. Our Profiline LP comes with a 1650 mm turntable as standard and can wrap pallets up to 2500 mm in height. Automatic pallet detection (via photoelectric cell) is standard, as are adjustable top and bottom wraps. Godpfx Aiez E Ilaehouh This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be optimally adapted to your needs. Would you like a higher mast, film pre-stretch, or an automatic film cut-off? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with options perfectly matched to your requirements. About us: We believe that business is made between people! A supplier delivers the goods you order – a partner does more: they help you find the best products, support you in achieving your goals, and stand by you in case of problems and challenges! That is our conviction. For over 40 years and through four generations, we have been the partner of mid-sized companies for all matters concerning 'stretching and sealing.' Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: used, Year of construction: 2007, Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skid's own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data Gedpfsz Hb Scsx Aihsuh - Manufacturer: KHS AG (Dortmund, Germany) - Model: Corvus - Year of manufacture: 2007 (filter housings 2006) - Machine type: cartridge filtration system (microfiltration), skid-mounted - Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each - Housing design ratings: max. 10 bar at up to 90 °C, max. 2 bar at 121 °C - Material: stainless steel - Overall dimensions: approx. 3,600 x 1,700 x H 3,750 mm Equipment - 4 CE-marked KHS cartridge filter housings - Pneumatically operated valve manifold with stainless steel piping - Pressure gauges and process instrumentation - Stainless steel control cabinet with Siemens PLC and pneumatic valve terminals - Stainless steel skid frame with mesh safety guarding Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel Guedpfxoz Hckmo Aihjh - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: new, Year of construction: 2012, functionality: unexamined, machine/vehicle number: Modelo Y15V # de Serie C12070192, screw diameter: 22 mm, displacement volume: 36 cm³, injection pressure: 1,417 bar, injection weight: 44 g, ejector stroke: 200 mm, plate length: 240 mm, plate width: 200 mm, plate height: 40 mm, total length: 1,200 mm, total width: 1,200 mm, total height: 2,400 mm, overall weight: 700 kg, heating capacity: 2 kW (2.72 HP), power: 2.2 kW (2.99 HP), type of input current: AC, input frequency: 60 Hz, input voltage: 220 V, I am selling 3 Guan Ming Y-15 V machines and 1 Y-25V machine, all new from old inventory. They have been stored in their original packaging since they were received from China in 2012 and have never been put into production. There are 3 machines with a capacity of 15 tons and 1 machine with a capacity of 25 tons. The Y-15V machines have a 22 mm screw and a maximum injection capacity of 44 grams. The Y-25V machine has a 30 mm screw and a maximum injection capacity of 103 grams. All 4 machines are located in Tepotzotlán, State of Mexico. They are sold without molds, accessories, or spare parts. Price plus VAT. Loading, crane, maneuvering, insurance, and transportation are the responsibility of the buyer. The machines are sold subject to inspection and testing by the buyer. Gusdpfxez Aby Uj Aihoh Payment must be made before the machine(s) are removed.

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Gsdpfx Aijz Ad Dcsheuh Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: good (used), functionality: fully functional, RIVACOLD UNIT + EVAPORATOR RIVACOLD Freezer Kit: Gjdpfx Aisz Aahkoheuh - REFRIGERATING UNIT TYPE RV4B0905 COPELAND SCROLL ZF18KVE REFRIGERATING COMPRESSOR - RIVACOLD REFRIGERATING EVAPORATOR RX50334 Dismantled by a professional refrigeration company. The unit contains no gas. The transport costs depend on the weight, volume and above all the distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require a telephone contact, so please ask about transport costs and other delivery methods to contact us by phone. Our contact details can be found in the seller's legal information. Payment in cash on delivery on site. We sell and export worldwide, thanks to our very large warehouse capacity we can also flexibly and quickly deliver larger quantities. Please contact us before purchasing. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, power: 36 kW (48.95 HP), fork carriage width: 1,470 mm, fork length: 1,200 mm, empty load weight: 4,350 kg, total length: 3,084 mm, drive type: Diesel, construction width: 1,350 mm, Rough terrain forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: very good Front tire type: Pneumatic Front tire size: 300-15 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 7.00-12 Rear tire condition: 80 - 100% Description: The MSI 25 is a versatile mast forklift and unique in its kind. It can be used in the wood and paper industry, in recycling, in logistics applications, etc. Whether in an industrial building, in the yard, or on light terrain, the hydrostatic transmission, in combination with the powerful engine and two large-diameter drive wheels, enables precise and smooth operation. This machine ensures daily productivity gains. For efficient maneuvering, the MSI 30 has a steering axle with an integrated cylinder, which gives it a very small turning radius. Thanks to the numerous available attachments, the MSI 30 is extremely versatile and suitable for lifting, loading, unloading, and storing long loads. It has a lifting capacity of 3.0 t. Side shifter, 3rd valve, 4th valve, front work light, heater, full cab, full free lift, CE certificate, joystick, rotating beacon, windshield wiper, seat. Gsdpjz Ntwksfx Aihouh

Condition: good (used), functionality: fully functional, mileage: 164,785 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, empty load weight: 2,356 kg, maximum load weight: 1,144 kg, first registration: 09/2026, next inspection (TÜV): 09/2028, loading space length: 3,350 mm, loading space width: 1,780 mm, loading space height: 1,950 mm, emission class: euro6, color: white, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, fuel: diesel, machine/vehicle number: MAPG210, Equipment: ABS, Bluetooth, USB port, air conditioning, airbag, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, navigation system, onboard computer, parking heater, power assisted steering, power mirror, sliding door, tire pressure monitoring, trailer coupling, truck registration, 9147 Solid paint, Arctic White MB 9147 A50 Front axle with increased load capacity AR3 Axle ratio I = 4.182 C6L Multifunction steering wheel CB8 Stabilization, Level II CL1 Steering wheel adjustable in inclination and height CW2 Deletion of vehicle lowering function D03 High roof D51 Partition, full-height with window E07 Hill start assist E1D Digital radio (DAB) E1E Navigation E1G Live Traffic Information E1U USB socket, 5 V E2N Control for Pro features in NTG6 E3M MBUX multimedia system with 7-inch touchscreen E43 Trailer socket, 13-pin ED4 AGM battery 12 V 92 Ah ES0 Jump start contact EW6 Pre-installation for Remote Services Plus EX9 3 years of free map data updates EY5 Mercedes-Benz emergency call system EY6 Breakdown management F3F Passenger-optimized gear selector console F49 Heated windshield F61 Interior mirror F68 Exterior mirrors, heated and electrically adjustable FR8 Rear view camera GD9 6-speed manual transmission, ECO Gear High Torque H12 Hot water auxiliary heater H21 Heat-insulating glass all around with band filter on the windshield HH9 Semi-automatic controlled climate control system Tempmatic HI1 Climate zone 1 (cold/comfort) IG4 Standard IG5 Basic IH6 Head unit ECE/ROW IK0 Complete vehicle IL1 Domestic market (Germany) IL5 Left-hand drive IR4 Wheelbase 3665 mm (code defining the base model) IT4 3.5-tonner J10 Speedometer, km/h J55 Seat belt warning system for passenger seat J58 Seat belt warning system for driver seat J65 Outside temperature display JA8 Crosswind assist JF1 Rain sensor JG0 Shift point indicator JI7 Service interval 60,000 km KB7 Main tank, 93 liters KL5 Fuel filter with water separator LA2 Headlamp assist LB1 Lateral marker lights LB5 3rd brake light LC2 LED light strip in the cargo area LE1 Adaptive brake light LX5 Europe M40 Generator 14V/200A MG5 Engine OM642 DE 30 LA 140 kW (190 hp) MJ8 ECO start/stop function MP6 Engine version Euro VI Gjdjz N Alqepfx Aihouh MS1 Cruise control OB1 Adjustment of the climate control system Q11 Longitudinal member reinforcement QA7 Trailer coupling for increased trailer load, 3.5 t QA9 Step on the rear door when a trailer coupling is installed RR0 Tires, optimized for rolling resistance RS3 Steel wheels 6.5 J x 16 RX5 Wheel manufacturer Maxion Wheels S22 Armrest for driver's seat, ISO-fix (child seat attachment system) S23 Passenger seat, double seat SA5 Airbag, driver SA6 Airbag, passenger SB1 Driver seat, comfort SK2 Seat occupancy recognition, driver seat T16 Sliding door, right T77 Grab handle, entry, cargo area sliding door at partition T86 Entry handle on rear corner pillar, right V94 Cable duct on side wall V95 Cable duct on rear portal VA7 Stowage compartment with net in rear doors VF7 Fabric Maturin, black W17 Window, front right, fixed in side wall/sliding door W54 Rear door, double-wing, 270 degrees W61 Window in tailgate/rear doors X30 Vehicle registration certificate, part 2 X99 Manufacturer Mercedes-Benz AG XC9 Certificate of Conformity (COC) documents XG7 Without increase/reduction in permitted weight to 3500 kg XM4 Acoustic package Z1N Approval N1 Z2E Country version EU-EFTA-UK Z4V Production location, Düsseldorf Z7K Fleet comfort package ZM0 Panel van

Condition: used, empty load weight: 6,346 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2022, next inspection (TÜV): 09/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 97 m³, suspension: air, tire size: 435/50 R19,5, color: silver, Year of construction: 2022, mileage: 159,123 km, Equipment: ABS, Unladen weight: 6346 kg, permissible total weight: 36000 kg, load securing with certificate, cargo space (L W H): 13,620 mm x 2,480 mm x 2,900 mm, tire size: 435/50 R19.5, certificate DIN EN 12642 (Code XL), cargo space volume: 97 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, lift axle at the front, electronic braking system EBS, tool box, bolted chassis, sliding tarpaulin, odometer, connector plug 1x15 and 2x7 pole, anti-spray, liftable roof (manual), telematics system, power curtain on both sides, you can find our entire vehicle range at . Would you like financing? With our value-added services, we offer you individual financing options, full-service and telematics services. We will be happy to advise you. Godpfez Shtysx Aiheuh

Condition: like new (used), Year of construction: 2020, operating hours: 20 h, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 630 mm, Thicknesser T45 by Martin with Spiral cutterhead Planing width approx. 630 mm Planing height adjustable electrically from 2.8 to 300 mm, reading via digital display with 1/10 mm accuracy and positioning control The control system also offers the possibility of incremental adjustment. Furthermore, 99 fixed values can also be stored as a program. Drive motor 10 kW with automatic motor brake Gjdpfoz R Nqqsx Aihsuh Spiralcutterhead Feed speed 6 + 12 m/min Rubberized infeed roller 2 pice Rubberized outfeed roller Planed machine table guided on four lead screws and guides for optimal stability Low-noise design with soundproof hood Dust extraction connection 160 mm Emergency stop at the front and rear Operating manual CE marking Dimensions approx. 1200 x 1300 x 1250 mm (L x W x H). Weight approx. 1200 kg. Transport throughout Europe can be arranged at a good price.

Condition: used, Heraeus Type: HT 7012 S2 Heraeus Shock Test Chamber Temperature Shock Test Cabinet, Water-Cooled Two-Chamber Design Warm Chamber: Gedpfozd R Azox Aihjuh The temperature control for the warm chamber ranges from +50°C to +220°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 11 K/min. Cold Chamber: The temperature control for the cold chamber ranges from -65°C to +70°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Temperature range, warm chamber: +50°C to +220°C. Temperature range, cold chamber: -80°C to +70°C. Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm. External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm. Rated power: 10 kW. Rated current: 25 A. Voltage: 3/N/PE AC 400 V +6/-10% 50 Hz. Refrigerant: R404A / R23. Weight: 1000 kg. For your safety as a buyer, please note the following information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. Refilling with refrigerants that comply with legal regulations. 3. Leak test with certificate. 4. After successful inspection, the chambers will undergo a test run, which is monitored with calibrated devices. Condition: used. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Heraeus Gjdpfjzd R Uwjx Aihsuh Type: HT 7012 S2 Temperature shock test chamber, water-cooled Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -80°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Weiss Type: TS 130 Weiss Temperature Shock Testing Chamber, Air-Cooled Specifications: Gedpfxjzp D A Ee Aiheuh Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover time: 10 seconds Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift basket (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on test chamber floor: max. 20 kg Cooling water pressure: min. 2 … max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Refrigeration cascade: water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Gedpfxozxggls Aihsuh Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, Weiss Type: SB2/500/80 Water-cooled climate testing chamber Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: Left side: ∅ 100 mm Right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information! Godpezd Ultsfx Aihsuh The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Espec Type: TSD-100 New evaporator installed in February 2026 100-liter usable volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate Guedjzizl Ropfx Aiheh 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.