Used Cold Store for sale (3,627)

Condition: new, Manufacturer: Behringer Eisele Type: VMS 350 Condition: NEW Machining cross section max. round at 90° 120 mm Machining cross section max. rectangle at 90° 170 x 100 mm Machining cross section max. round at 45° 120 mm Hfjdpfxsxwl Rgo Ad Dep Machining cross-section max. rectangular at 45° 120 x 100 mm Saw blade diameter 350 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 17 rpm / 34 rpm Machine head swivels 45-90-45-30° Total motor power 1.4/1.9 kW Width 900 mm Length x width x height 1050 x 900 x 1900 mm

Condition: used, Year of construction: 1988, saw blade diameter 0400 mm cutting diameter 140 mm cutting length 140 mm mitre joint cuts -/+ degrees +/-45° cutting capacity - square 130 x 130 mm cutting speed 5 - 30 m/min type of control konvent. Hodpsxu Nriofx Ad Defp voltage 380 V connected load 6 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,5 x 1,5 x 1,5 m Machine has angle cutting arrangement +/- 45°, is semi automatic without material infeed.

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Hfodpfxevbwfno Ad Dsp

Year of construction: 2015, condition: used, Used machine Year of manufacture: 2015 Info: Was a demonstration unit from Holz-Her and only went into production operation in 2019 Equipment and technical data: Automatic Panel Storage System STORE-MASTER 5110: - 30% to 50% space saving - Minimal distances between stacks (from 70 mm) = optimal space utilization - No panel damage; panel separation monitored by weight measurement - Fully automatic process (infeed/outfeed) as well as automatic loading of the machine - Adaptable to all panel formats (1.2 to 5.6 m), depending on option - Panel rotation by 90° - Low height of manipulator construction External dimensions: - Length: 8.5 m - Width: 7.5 m Panel formats: - Min. panel size: 1.2 x 0.6 m - Max. panel size: 3.2 x 2.1 m Hfjdpjwkbagofx Ad Dop - Max. lifting weight: 150 kg Lifting and stacking range: - Stack height: 1.8 m (max. 2.0 m) - Max. lifting height: 2.1 m Travel speed: - Horizontal: approx. 120 m/min - Vertical: approx. 45 m/min Manipulator suitable for slightly air-permeable, smooth materials such as coated chipboard, blockboard, raw MDF, raw HDF, raw chipboard (good quality) Vacuum capacity for the suction units on the manipulator: 100 m³/h for a material mix in the warehouse including e.g. MDF and raw chipboard Connected load: 6 kW Portal bridge with vibration damping, manipulator head with lifting device, as well as steel gripper arm, space-saving due to low structural design Articulated arm design with direct drive via steel band; thus maintenance-free and insensitive to vibration Electronic panel position measurement Panel rotation correction Panels are measured using sensors and neatly stacked Separation device for thin panels via integrated weight measurement Infeed and outfeed station Direct loading onto the machine Warehouse management software Previous list price: €110,000.00 Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1988, Saw blade diameter: 400 mm Cutting range round: 130 mm Hodpfxew Tk Ecj Ad Dsfp Rectangular: 305 x 40 mm Miter cut at 45° round: 130 mm Rectangular: 40 mm Cutting speed: 10 m/min Hydraulically infinitely variable feed speed: 0 - 1000 mm/min Saw drive: 380 V, 1.7 kW Weight approx.: 700 kg Space requirement without roller table: 1100 x 1000 x 1900 mm

Condition: used, Year of construction: 1999, 145 mm ja zwei Geschwindigkeiten cooling ja type 41103M00U2 mm 6791 volt 400 V Hfedpfx Aew Sykled Dep frequency 50 Hz

Year of construction: 2017, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21004 Specifications: Manufactured in 2017 Net weight: 114 kg Max pressure: 9.6 bar Extra hose set and nozzle Hfsdpjwzrp Hofx Ad Dsp Feeder replaced Works as it should Ready for delivery Own weight: 114

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Gearbox, of course, backlash-free! Type: KKS 400 H Hjdpfx Asxwnz Ied Defp Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Forklift available for loading.

Condition: good (used), Year of construction: 1999, saw blade diameter 450 mm cutting diameter 150 mm saw blade diameter möglich: 400 + 370 mm Saw blade 50 mm saw blade feed stepless ca. 0 - 1000 mm/min rapid return speed 3300 mm/min table rotating + / - 90 Grad cutting speed 7 - 43 m/min Hfedpfoxqrdmsx Ad Dep total power requirement 4 kW weight of the machine ca. 1050 kg Overall size 1020 x 1350 x 2000 mm Semi-automatic cold circular saw, made by Kaltenbach, type KKS450H, with Siemens S7 PLC control for cutting speed and sawing height, feed roller conveyor, discharge roller conveyors with hand crank, remote control and digital display. Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . Hfodpexwkdxefx Ad Djp .

Condition: used, mileage: 340,632 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 3,665 mm, overall weight: 3,500 kg, first registration: 07/2013, emission class: euro5, color: red, driver cabin: day cab, number of seats: 2, Equipment: ABS, airbag, central locking, electronic stability program (ESP), Performance/Engine: 2,143 cm³, with turbocharger Hedpfx Aexv Hcbjd Dsfp Axles: 4x2 Brakes: Disc brakes Cab: Electric windows, outside temperature display Refrigerated body: Cold Car, bunker doors/ice doors, 5 doors on the left, number of doors on the right: 5 doors Refrigeration unit: Copeland, eutectic plate cooling system, cooling down to -33 °C Other equipment: Power steering, immobilizer ID: 1187643 -33 °C Front axle with increased load capacity Electronic Stability Program (ESP9i) Heavily reinforced rear axle stabilisers under frame Reinforced stabiliser on front axle Lockable glove compartment Overhead storage above windscreen 6-speed manual transmission ECO Gear Wheelbase 3665 mm 3.5-tonner Driver's seatbelt warning system Automatic driving light switch-off to parking light Adaptive brake light Engine version EEV Engine OM 651 DE 22 LA 70 kW (95 hp) 3800 rpm Front passenger seat adjustable Driver airbag Smoker package Video1: Video2: Plate cooling is a refrigeration system that uses eutectic plates to maintain a suitable temperature level. The passive plates are connected to the power grid (380V) overnight. The solidification point of the eutectic solution is -33°C. The eutectic plates serve to maintain the temperature of already frozen products. We constantly have a large selection of used refrigerated and ice cooling vehicles in stock. More of our current range can be found at Non-binding offer, sale only to commercial customers, subject to prior sale and errors Advertising and company logos on vehicles may have been digitally edited in the photos

Condition: used, Year of construction: 1989, cutting diameter 260 mm serial number 109967 Hfjdpfx Adspxri Ue Dep volt 380 V frequency 50 Hz weight of the machine ca. 500 t

Condition: ready for operation (used), empty load weight: 1,350 kg, total length: 1,960 mm, total width: 1,170 mm, total height: 1,070 mm, additional equipment features: CNC full automatic, Full automatic circular saw Automatic CNC positioning of sawblade = automatic turntable, up to 180° left and right Equipped with: 1 - workpiece storage unit (green) + auto rollerconveyor, length 7 meter Hodpjxpki Ejfx Ad Dsfp 2 - auto feed-in by pulling workpiece to sawblade, max single movement of 2000 mm - repositioning is possible for longer lengths 3 - auto feed-out of cut workpiece, max movement of 1000 mm 4 - unloading table with chains Automatic zero point recognition Automatic programmed controlled processing of cutting sequences Storing of programs with different sawing tasks Dia saw / abrasive - disk: max 425 mm Turningspeeds: 6 > 30m/min Power needed / motorpower: 5,5 kW

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 013531, An efficient and economical lamination process is realized with the SMARTLAM CHK hot-cold transfer press system (Twin Stack series). Hfsdpfx Adjxwdmas Djp The SMARTLAM CHK is a twin-stack system that offers higher efficiency and increased output compared to conventional single-stack systems. By using two presses—one for heating and one for cooling—cycle times and energy consumption are significantly reduced. Depending on the material and laminate structure, up to 4 cycles per hour can be achieved with the SMARTLAM when processing 10 laminate layers per level. It is possible to place multiple laminates side by side in a single cassette. In alternative short-cycle test operation, approximately 1–2 cycles per minute can be achieved with one laminate layer per cassette (without vacuum and without a pressurized preheating phase).

Condition: used, Year of construction: 2010, Overview This cold glue labelling machine was manufactured in 2010 by the Italian company Kosme S.r.l. The model Extrafix 504/6 SC2 E3 is designed for labelling of glass beer bottles using cold glue technology. The machine was in production until January 2025, is now stored and ready for shipment, and remains in good operational condition. Technical data  Capacity: 6,000 bottles per hour Formats: 0.33 L (long-neck bottles) Neck finish: 26 mm crown cork Label Type: Cold glue (paper labels) Status: Stored, ready for shipment Condition: Previously in production until January 2025 Hfsdpfxoxn T Nfs Ad Dep

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm Hfsdpfx Asvmtdked Dsp work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). The price is an already reduced special price. For an additional charge at cost: 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Hedpfx Adjxpd D Nj Dofp Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: used, Year of construction: 1977, miter ja Hfjdpovxlthefx Ad Djp clamping ja kW mechanical Senkung weight of the machine ca. 500 kg

Condition: used, Year of construction: 1981, turning speeds 40/80 U/min 0025 voltage 380 V clamping ja kW Hjdevu Hlkopfx Ad Djfp miter ja weight 700 kg

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Hsdpfx Adof Dwa Ue Dsfp Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Hfjdpfx Asd N Sm Dod Dep Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2003, saw blade diameter max. 300 mm Hodjud Tq Tepfx Ad Dsfp speed setting 2 Stufen inkl. 120 mm weight 450 kg

Condition: used, Year of construction: 2001, volt 400 V weight Stück 490 kg 2 miter ja 175 mm Rund Hfjdpsu T Sfbsfx Ad Dsp

Condition: used, Year of construction: 2001, saw blade diameter 400 mm miter . Kühlung weight of the machine ca. 1 t number 4 Stück Hodpfx Ajlug Tujd Djfp +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1999, cutting diameter max 400 mm mit Sägeblättern Hfedpfxew Sygmo Ad Dop weight of the machine ca. 1,4 t