Used Duro for sale (24)

Condition: used, RÖHM 3-Jaw Chuck, Used Type DURO-T315 - without jaws - Klsdpewm D Rtsfx Agqel

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck Kledpfev Tlryox Agqel -Manufacturer: Röhm, three-jaw chuck type DURO-S chuck size Ø 160 mm -Passage: Ø 42 mm -Bolt circle: Ø 83 mm -Mounting: Short taper 4 / cone 56 - 62 mm short taper flange with Camlock fastening -Dimensions: Ø160 x 115 mm -Total weight: 9.6 kg

Condition: good (used), 3-jaw power chuck with safety pin RÖHM Duro 400 Diameter 400 mm Spindle mount DIN 55027 size 11 Weight approx. 105 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Klodpfxswxprto Agqjl

Condition: used, Technical details: diameter: 260 mm width: 125 mm weight of the machine approx.: 50 kg revolution per minute: 4700 U/min Merkmale: neuwertig automatisches spannen Spannbereich außen 120mm Spannbereich innen 50mm Flanschenaufnahme innen Ø170 x 6mm * Klodpfxsu Nlius Agqjl

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 107.44.00.072, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 20 m/min, workpiece weight (max.): 500 kg, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron UCP 800 Duro – 5-axis CNC machining centre Klsdpfx Agewww Rhsqsl We offer for sale a precise 5-axis CNC machining centre Mikron UCP 800 Duro from the renowned Swiss brand GF Machining Solutions. The machine is perfect for machining complex parts, moulds, dies, and components that require the highest precision and surface quality.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. Kodpfxex D Ux Tj Agqoll The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Control ON: 30,064 h Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: used, 1 set of soft top jaws, chuck jaws RÖHM Type: Duro 160/3 Suitable for 3-jaw wedge bar chucks Ksdpfsxpqz Uox Agqoll Chuck diameter: 160 / 180 mm Jaw length: 84 mm Jaw width: 39 mm Height without step: 95 mm Height with step: 99 mm Slot width: 8 mm Step width: 18 mm Hole spacing: 32 mm Holes: Ø 9 mm (for M8 bolts) - 1 set of steel top jaws - used, machined jaw set Base jaw dimensions L x W x H: approx. 84 x 39 x 99 mm Weight: approx. kg Multiple sets of top jaws available under stock number 62056 Top jaws compatible with RÖHM, FORKARDT, SCHUNK, or SMW

Condition: used, Power chuck, 3-jaw wedge bar lathe chuck, type presumably Duro 1802W-411592 Chuck No. K W-411592 Outer diameter: 180 mm Inner diameter: 45 mm Thread connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 5000 rpm Max. clamping force: 3000 daN Base jaw dimensions (L x W x H): 64 / 74 x 20 x 29 mm Klsdpexcbmhofx Agqsl - 1 set of chuck jaws consisting of base jaws and reversible hard top step jaws - 1 set of chuck jaws consisting of base jaws and reversible soft top step jaws - 3 sets of soft top jaws Weight: 21.5 kg Good condition Additional sets of top jaws available under stock number 62056

Condition: excellent (used), Year of construction: 2016, 207 USED JAC DURO 450/11 Semi-Automatic Bread Slicer. Year of manufacture: 2016. TECHNICAL DATA: - Slice thickness: 11 mm - Power supply: 230 V - Maximum bread width: 420 mm Kjdpfx Asxrnn Rjgqell - Maximum bread height: 150 mm - Bread slice size: 10-11 mm EXTERNAL DIMENSIONS (in cm) - Width: 75, - Depth: 65, - Height: 115. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2016, operating hours: 7,278 h, functionality: fully functional, clamping force: 550 kN, screw diameter: 32 mm, displacement volume: 96 cm³, injection pressure: 2,127 bar, Dr. Boy 55 A DUROPLAST (only 7,278 h) Klsdpfx Ajybqn Tsgqel Year of manufacture: 2016 Operating hours: 7,278 hours Screw: 32 mm Duroplast Injection pressure: 2,127 bar Shot volume: 96 cm³ Clamping force: 55 t Tie bar spacing: 360 x 335 mm Min. mould installation height: 250 mm Max. platen opening: 650 mm Dimensions: 3,200 x 1,200 x 2,000 mm Weight: 2,430 kg Connection: 11 kW DUROPLAST granulate injection unit, single core pull control, air blast device, prepped for 4-circuit tool heating, etc.

Condition: used, functionality: unexamined, Test height 320 mm Projection 150 mm Klodjuihh Rspfx Agqol

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0032703, Accessories: - Reference plate 63.3 HRC - Reference plate 58.5 HR30N - Test weights 150, 100, 60, 45, 30 kgf - Preload weight - V-anvil - Spirit level - Diamond indenter - Steel ball indenter 1/8" - Steel replacement balls 1/8" - Dust cover - Operating manual The diamond indenter is slightly damaged below the tip (minor chipping – see photos). Kjdpfox E U U Hex Agqoll

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 199583, clamping force: 1,800 kN, screw diameter: 35 mm, injection pressure: 1,595 bar, ejector force: 80,000 N, opening stroke: 1,050 mm, TECHNICAL DETAILS Clamping force: 1,800 kN Platen size (H x V): 880 x 830 mm Minimum mold height: 300 mm Maximum opening stroke: 1,050 mm Maximum ejector stroke: 180 mm Ejector force: 80 kN Injection unit Screw diameter: 35 mm Shot volume: 154 cm³ Maximum screw speed: 320 rpm Injection pressure: 1,595 bar Injection rate: 151 cm³/s Nozzle stroke: 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,720 x 1,350 x 2,020 mm Net weight (incl. control cabinet): 11.7 t Klsdpfxsxuqh Ss Agqel EQUIPMENT ENGEL ecodrive SHV2 (servo-hydraulic drive) Quick-clamping system Core pull control Thermoset package ENGEL Viper 40 robot integrated with RC200-A03 control ROTOFEEDER BMC50 with frequency converter and dedicated programming interface Microcomputer CC200 with 15'' TFT color touchscreen

Condition: used, Year of construction: 2008, OMAX 60120 P3060V 30HP (22kW) 4100 Bar EnduroMAX - machine including crank pump 30HP (22kW) 4100 Bar EnduroMax - working table 3656 mm x 1956 mm - X - Y axis travel 3200 mm x 1575 mm - air cushion (allows material to be cut while submerged) - control computer compatible with Windows 10 and OMAX Layout&Make Premium software - premium software - integrated diamond orifice head - OMAX 300kg abrasive feeder Full overhaul of the machine performed in 2024 (year of production 2008) Ksdjtmp T Djpfx Agqell Possibility to equip the machine with additional accessories for an extra charge.

Condition: used, Year of construction: 2006, (2006) Arburg 420 C 800-350 DUROPLAST Ksdpfxeuy Sdte Agqsll Clamping force: 80 ton Screw dia: 40mm Weight 3400 kg Machine used for Bakelite production (DUROPLAST)

Condition: excellent (used), Year of construction: 2006, Wolpert 930, year of manufacture 2006 Klsdjx N Ry Hspfx Agqol

Condition: excellent (used), Year of construction: 2006, Wolpert Vickers 432-SVD, year of manufacture 2006 Kljdpsx N Rygsfx Agqol

Condition: excellent (used), Wolpert DIA TESTOR 7521 Kljdsx N Rw Eepfx Agqel

Condition: excellent (used), Year of construction: 1975, For sale - Hardness tester Wolpert Testor HT2001, year of manufacture 1975 Klsdpsx N Rvnofx Agqsl

Condition: excellent (used), Furniture rollers, furniture dog plastic castors, furniture transport trolleys, transport rollers, platform trolleys, transport trolley wheels, heavy-duty trolleys, table trolleys, assembly trolleys, complete wheels, tires with rims, -Manufacturer: Kettler Segers complete bike, unused Kjdpjhbtc Hjfx Agqsll -Tires: Kettler Duro HFR 3.00-4 -Rim: without bearing, inner Ø 26 mm -Quantity: 22 pieces -Price: per piece -Dimensions: Ø 253 x 80 mm -Weight: 1 kg/piece

Condition: like new (used), 1 set of used, hardened, reversible hard top jaws Manufacturer: SMW-Autoblock Mounting on base jaws type: BERG, FORKARDT, KITAGAWA, RÖHM, SMW-Autoblock, SCHUNK Base jaw types: MFG- SFG- FGB Size: 400–500 Dimensions: Width: 45 mm Height: approx. 75 mm Length: 130 mm L-spacing: 60 mm F-slot: 18 mm Q-slot N: 30 mm Thread: M16 mm Application: wedge bar chucks, power chucks Kjdehlhbgepfx Agqoll FORKARDT manual chuck F400 – F500 FORKARDT power chuck ø 500 mm KTNCV; SMW-KNCS; SCHUNK-THW500, Roto S, RÖHM-Duro, BERG-KHNC KITAGAWA-QJ21-QJ24 New price: >380.00€

Condition: good (used), Year of construction: 2008, Steuerung: Fagor CNC8055 Aufnahme: VDI30 Späneförderer Werkzeugwechsler: Sauter Revolver 8Fach Z-Achse: 810mm X-Achse: 280mm Spitzenweite: 1000mm Drehfutter: Röhm Duro, Durchmesser 200mm Drehdurchmesser über Schlitten: 230mm Drehdurchmesser über Bett: 460mm Spindeldurchlaß: 56mm Spindeldrehzahl: max. 3100 U/min. Werkstückgewicht max.: 570kg Antriebsleistung: 18kw Maschinen Abmessung: Länge 3660mm – Breite 1870mm Gewicht Maschine: 2900kg Kledpfx Agoim H Uneqel

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1110 000026 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS Working surface: 1,000 x 800 mm System: DMG Heidenhain Mill Plus Rotating table (4th axis): available X-travel: 1,250 mm Y-travel: 880 mm Z-travel: 800 mm Spindle Spindle mount: SK50 Max. spindle speed: 8,000 rpm Spindle motor power: 28 kW Pallet changer Number of pallets: 2 pieces Ksdpfx Aevwb Huogqsll Pallet size: 1,000 x 800 mm Tool magazine Number of tools: 120 pieces

Condition: ready for operation (used), functionality: fully functional, turning diameter: 420 mm, turning diameter over bed slide: 432 mm, center width: 2,032 mm, TECHNICAL DETAILS Max. turning diameter (over bed): 432 mm Max. turning diameter (over support): 420 mm Center distance: 2,032 mm Control system: Haas Klodevwb Ncjpfx Agqel