Used Cold Stores for sale (2,792)

Condition: ready for operation (used), functionality: fully functional, number of drawers: 16, total height: 2,570 mm, total width: 3,500 mm, total length: 5,850 mm, 16 positions semi-automatic storage rack for sheets, L3250x2550mm Positions 1, 12, 13, 14, and 15 have a pad of 25 cm, positions 2 to 11 have a pad of 8 cm. Kledey N S Tuopfx Anyou External dimensions approx. L5850xW3500xH2565mm (hydraulic drive)

Condition: ready for operation (used), functionality: fully functional, total height: 2,200 mm, total width: 3,350 mm, total length: 30,000 mm, load capacity per storage section: 2,500 kg, support length: 15 mm, 6 modules of 15-position storage racks in line, the first section with pads of 19cm, the other 5 with pads of 15cm, load capacity per frame 2,500 kg. Ksdsy N S Sdjpfx Anyslu Loading-unloading opening: +/-950mm for glass sheets 3250x2550mm. Total space required for the complete system: approx. L30 meters x W3,350mm x H2,200mm.

Condition: used, Year of construction: 1979, saw blade diameter 300 mm cutting diameter 100 mm Kodpfx Anjy N D Nneyolu saw blade turning speeds 40 / 80 U/min capacity 90 degrees: square 90 mm capacity 90 degrees: round 100 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t

Condition: used, Year of construction: 1976, functionality: fully functional, Cold former double stroke, cold press Max. dimensions for standard bolts: M12 x 150 mm Max. wire cutting length: 180 mm Kodpfsy N N Iisx Anyslu Max. output: 105 pieces/min The machine can be viewed whilst powered on. Weight: 10 t

Condition: used, Year of construction: 2021, Overview This rotary cold glue labelling machine was manufactured in 2021 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, primarily in the beer industry. It is equipped with one cold glue labelling aggregate and is prepared for the installation of an additional unit. The system features a mechanical bottle table drive (control cam system) and a Krones glue pump for consistent label application. Technical data Capacity: approx. 5,000 bottles/hour Speed range: approx. 1,000 – 6,000 bottles/hour Formats: 0.33 L / 0.5 L glass bottles Application: Labelling of glass bottles (beer) Configuration: Rotary machine with 1 cold glue labelling aggregate (prepared for 2nd unit) Label positions: Body / wrap label, neck / chest label Utilities: 400 V / 50 Hz / GND / N Scope of Delivery Labelling machine | GERNEP | Labetta 4/3/8 480 1A | 2021 | Rotary cold glue labeller with 1 aggregate (prepared for second unit) Glue system | Krones | Glue pump Control system | GERNEP | Touch panel Kljdpsyzcyvefx Anyeu

Condition: used, Year of construction: 2019, Overview This rotary cold glue labelling machine was manufactured in 2019 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly in the wine industry. It is equipped with two cold glue labelling aggregates for the application of body, neck ring and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise label application. Technical data Capacity: approx. 5,000 bottles/hour Speed range: approx. 1,000 – 5,500 bottles/hour Formats: 0.75 L Bordeaux (H=309 mm, Ø74 mm) 0.75 L Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) 1.0 L Schlegel (H=309 mm, Ø89 mm) 0.75 L Burgunder (H=297 mm, Ø82 mm) Application: Labelling of glass bottles (wine) Configuration: Rotary machine with 2 cold glue labelling aggregates Label positions: Body (front), neck ring, back Utilities: 400 V / 50 Hz / 3 Phase / N / PE Scope of Delivery Labelling machine | GERNEP | Labetta 4/3/12 784 2A SD | 2019 | Rotary cold glue labeller with 2 aggregates Glue system | Krones | Glue pump Control panel | GERNEP | Touch panel Klsdpfx Aoyzcycjnysu

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Kasto V 315 M with CE Saw blade 315 mm with 3 sharp spare blades Kledpfoy Rt H Ejx Anyju 2 speeds, 1.8 kW drive Cutting range: round 110 mm, flat 150 mm Mitre cuts right / left Coolant system + minimum quantity lubrication Length stop Condition: very good, no play in the drive Of course, can be inspected under power Free loading from D - 88433 Schemmerhofen

Condition: reconditioned (used), Year of construction: 2026, CARLO SALVI DL 560 RF Refurbished like new Closed cutoff New mechanical parts New electrical system CE compl. with Inverter, PLC and remote assistance Supplied with conveyor belt and control process Brankamp Full revised by H.B.R. srl Technical details: Number of dies: 1 Klsdpjy Rzgasfx Anyeu Number of punches: 2 Diam. raw material min/max: 2 - 5 mm. Max length under the head: 60 mm. Max length cutoff: 75 mm. Hole depth: DIN 7338B Diam. head max.: 10 mm. Speed max: 440 pz./min. Forza max. taglio: 1.500 daN Forza max. di stampaggio: 11.000 daN Peso netto macchina: 6.000 kg. Potenza motore: 9 Kw Occasione da non perdere! Come on in HBR to look the machinery! Visit our Company!

Condition: good (used), Kaltenbach cold circular saw KKS Maschnr.6995Saegeblatt Ø 350 mm-speed 130 m/min-weight total 1200 kg Kledjd Tp Nlopfx Anysu

Condition: used, Kaltenbach KKS 400 Technical Specifications Saw blade diameter: 370 mm Cutting diameter: 115 mm Stroke: - mm Cutting area at 90 degrees, flat: 300 x 35 mm Cutting speed: 11 / 15 / 22 m/min Klodexhdvvopfx Anyou Total power requirement: 1.4 kW Machine weight approx.: 850 kg Space requirement approx.: 1100 x 1100 x 1600 mm

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3515 104 114, saw blade diameter: 350 mm, cutting range round steel at 45°: 100 mm, cutting range round steel at 90°: 100 mm, total length: 800 mm, total width: 1,250 mm, overall weight: 350 kg, cutting range square steel at 90°: 90 mm, The KASTOdisc U 10 is a robust semi-automatic vertical cold circular saw, suitable for precise metal cutting in workshops and medium series. Featuring two speeds and an adjustable feeder, it offers flexibility and high-quality cuts, while the pneumatic clamp stabilizes the material. Ksdpswxcuzsfx Anyjlu

Condition: used, Year of construction: 2011, Overview This rotary labelling machine (cold glue + self-adhesive) was manufactured in 2011 by Germany GERNEP. The machine is designed for high-speed labelling of glass bottles, particularly in the spirits industry. It combines cold glue and self-adhesive labelling technologies, allowing flexible application of multiple label types including body, back, neck ring and additional labels. The machine is equipped with 2 cold glue aggregates and 2 self-adhesive labelling units (HERMA). Technical data Capacity: approx. 12,000 bottles/hour Speed range: approx. 3,000 – 18,000 bottles/hour Formats: 700 ml / 750 ml / 1,000 ml glass bottles Application: Labelling of glass bottles (spirits) Configuration: Rotary machine, 2 cold glue units + 2 self-adhesive units (HERMA) Label positions: Body (front), back, neck ring, additional labels Utilities: 400 V Scope of Delivery  Labelling machine | GERNEP | Labetta 6/4/22 1056 2A 2SK SD | 2011 | Rotary labeller with cold glue and self-adhesive units Self-adhesive units | HERMA | 2 units, up to 70 m/min Control system | B&R | Touch panel control Kedpfx Aoyy Ad Sjnyjlu

Condition: used, Year of construction: 1972, 1 used, well-preserved hydro-pneumatic semi-automatic cold circular sawing machine for cutting aluminum, non-ferrous metals, wood and plastic Technical data: max. saw blade diameter 370 mm Cutting diameter 120 mm Cutting range at 90 degrees: flat 260 x 60 mm Cutting range at 90 degrees: square 105 mm Cutting range at 45 degrees: flat 200 x 45 mm Cutting range at 45 degrees: square 90 mm 0° cut - longitudinal cut: yes 2 speeds 1500 / 3000 m/min Drive cable 1.7 / 2.6 kW Machine dimensions L x W x H 1000 x 1000 x 1700 mm Machine weight 700 kg Accessories / Special features: - Semi-automatic operation: After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released. - Stepless feed - Pole-changing motor - 1 saw blade - Mitre cut on both sides Kodpfxebwl Emo Anyelu - Longitudinal cut 0° - Spray lever device Special accessories: - 1 roller table right with heavy stop 3500 mm and scale - 1 roller table left, approx. 3500 mm Special accessory price: € 1,500.00 plus VAT. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1974, Offer 26003 Technical Data: - Saw blade diameter: up to 370 mm - Cutting capacity at 90°: - round: 110 mm - square: 100 mm - rectangular: 280 x 40 mm or 240 x 85 mm - Cutting capacity at 45°: - round: 110 mm - square: 100 mm - rectangular: 220 x 40 mm - Mitre adjustment left and right: each 0 - 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 380 V / 1.2 / 1.8 kW - Saw blade feed rate hydraulically, steplessly adjustable Kljdpfxsy Nlnxe Anyou - Coolant system - Required space approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

Year of construction: 2008, condition: ready for operation (used), A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible. Kodpfx Anjy Nm Umoyolu

Condition: new, dimensions of saw-blade 350x32x4 mm vice 180 mm 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm Kledpoy Dh Nnsfx Anyou output 2,2 kw weight 225 kg

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Hettich CombiDancer Infrared Vortex-Evaporator with PoleStar Cold-Trap System (2005) For sale is a complete Hettich CombiDancer high-speed evaporation system (Hettich AG, Switzerland) — a premium parallel evaporator for rapid, gentle, and reproducible solvent evaporation, from light volatile ethers to high-boiling solvents such as DMF and DMSO. Decommissioned from a chemistry laboratory in fully functional condition with no known faults. Formally decontaminated (written certificate included). Never used in a biological or isotope environment. Highlights • Complete, ready-to-run system: CombiDancer + PoleStar cold-trap + diaphragm pump + rotary vane pump • 3–10× faster than conventional rotary evaporators; no sample balancing, no rotating parts in the chamber • Accepts large tubes, HPLC vials, Falcon tubes (15/50 ml), Eppendorf tubes, scintillation vials, microtiter/deep-well plates • Three independent heating zones (halogen IR, compartment heater, heated shaker plate) • PoleStar freezes solvents to –45 °C; rotary vane pump reaches 0.01 mbar for high-boiling solvents • Original paper manuals (CombiDancer & PoleStar) included CombiDancer Specs • Vacuum chamber: V4A stainless steel, Ø 360 × 180 mm • Vortex: 200–1,000 rpm • Temp: 20–80 °C • Vacuum: DN25 • Gas fittings: 2× 6 mm Swagelok • RS232 (VP, CT, PC) • 230 VAC / 1,800 VA • 765/930 × 695 × 470 mm / 78 kg PoleStar Cold-Trap Specs • Capacity: 3.3 L • Cooling: –45 °C • Vacuum: 0.01 mbar • Vessel: aluminium FEP-coated • Coil: V4A stainless steel • 230 VAC / 660 VA • 520 × 430 × 530 mm / ~45 kg Pumps Included • Vacuubrand PC2003 VARIO + CVC 2000 controller (oil-free diaphragm, auto vapor sensing) • Vacuubrand RZ 6 (rotary vane, deep vacuum) Scope of Delivery • CombiDancer unit • PoleStar cold-trap • both vacuum pumps • mobile cart • original manuals Kljdpfx Ansy Nmi Reyou • decontamination certificate Typical Applications • Analytical chemistry / SPE • combinatorial chemistry / HTS • pharma R&D • natural product & botanical extract workflows • food, cosmetics & life sciences

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. Klodpeykrtpefx Anyou If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Gearbox, of course, backlash-free! Type: KKS 400 H Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Kedpfsy Iycbjx Anyolu Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Forklift available for loading.

Condition: refurbished (used), Year of construction: 1980, For sale is a Kaltenbach cold circular saw The machine has been technically and optically refurbished Gearbox naturally free of play! Type: KKS 400 H Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Kljdjy Iybdopfx Anyou Forklift available for loading.

Condition: used, functionality: fully functional, very robust gearbox, motor 1.0 / 1.8 kW Saw blades: 360 mm Slow-running model with 6 cutting speeds: 8 / 10 / 12.5 m/min 16 / 20 / 25 m/min Kljdpfx Ajy Iv Hisnysu Test cutting at our facility with the following specifications: Cutting capacity at 90 degrees with blade size 360 mm: Round profile: 110 mm Solid round material: 80 mm Flat profile: 200 x 80 mm Weight approx. 560 kg

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of technical data to list, so I have uploaded several photos with the basic specifications for you to get an overview of the saw’s capabilities. This is a rare model equipped with a feeder (individual lengths) from 0-2000mm, and for repeat operations from 2000-9999mm. Automatic zeroing before cutting. The CNC saw head features automatic rotation of +/-60 degrees, two types of lubrication (emulsion and direct spray application). You can select between ejection of cut pieces via a small parts ejector or by a chain ejector with a drop-down function for longer and heavier sections. The safety fence assembly with IC barriers and numerous spare parts are included with the saw (not shown in the pictures as it is not currently mounted). All original documentation is provided and corresponds to the machine's serial number, ensuring straightforward installation without guesswork. Kledpeyk Inpjfx Anyeu Explanation of the issue: the saw is connected to electrical power and every individual function (of which there are many) works perfectly. The problem occurs during automatic operation, most likely due to program parameter issues (it uses the Windows platform). I have not found a suitable programmer willing to learn on my machine. Possible solution: I have contacted the saw manufacturer and they referred me to their authorized service provider, whose contact details I can supply to the prospective buyer. Estimated repair costs in Serbia range from €3000 to €5000; if you are closer to Germany or the Czech Republic, the expenses are significantly lower. Therefore, there are two price categories: if you purchase the machine as is, the listed price applies; if I resolve the issue, the price will be considerably higher. The listed price includes professional dismantling and loading onto the truck (a significant cost factor that is far from negligible); transportation is at the buyer’s expense. I hope this clarifies the current condition of the machine to some extent. Wishing you a successful purchase.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Aktionspreis 2026 Inkl. base frame !!! Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Ksdpfsfmck Hsx Anyjlu Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts

Year of construction: 2004, condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Saw blade diameter 350mm Cutting range round 90°/ 45° 100/ 100mm square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Shortest remaining piece length in automatic mode at 90° 260mm Working height 950mm Dimensions WxDxH 1530x1348x1890 mm Weight 980kg Kodpskfvhkefx Anyolu Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Year of construction: 1997, condition: excellent (used), A used very good condition cold circular saw from EISELE equipped with 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant device and documentation. Speed: 17/ 34 rpm Cutting range: Round 90°/ 45° r. l./ 30° r. 130/ 130/ 105mm. square 90°/ 45° r. l./ 30° r. 120x120/ 100x100/ 90x90mm rectangle 90°/ 45° r. li/ 30° r. 200x100/ 140x100/ 100/100mm Pneumatic connection 7 bar working height 900mm Machine dimensions WxDxH 865x1332x2175mm Weight 460kg Klodpfxokfp D To Anyou Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted