Used Cronosstech Spb 150 for sale (130)

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 1,550 mm, working width: 1,550 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Easily removable bent parts thanks to a hydraulically opening top roll * Very easy operation with movable control panel * Lower roll positions are easily read via two digital displays * Welded steel frame construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with roller bearings * Hydraulic synchronisation system for parallel movement of shafts Fgjdpoxbzr Ujfx Ah Usi * Extended shaft ends to allow mounting profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Specially ground and polished rolls for custom work * Bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic synchronisation system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 550 mm, roller (top) diameter: 550 mm, side roll diameter: 450 mm, roller length: 3,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 70 kW (95.17 HP), warranty duration: 12 months, Equipment: emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The bottom and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overloading * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Easy roll position reading via three digital indicators * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft * Very user-friendly operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT Fgsdpjxbzptsfx Ah Usi * NC and CNC control for automation * Top crane (elevator) for support when bending large diameters * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 8 kW (10.88 HP), STANDARD EQUIPMENT Welded steel construction body Three-roll drive by motor Shafts made from special high-strength, hardened, and ground material Horizontal and vertical working positions Hardened standard roll sets Movable control panel separate from the body Fsdpfxew Smi Ie Ah Usgi Manually adjustable mechanical side guides with 3-way movement Precise bending with motor brake Digital displays (2 units) OPTIONAL EQUIPMENT Pipe and profile bending roll sets Optional 2-axis hydraulic side guides Automation with NC control TECHNICAL SPECIFICATIONS Roll Shaft Diameter: 100 mm Roll Diameter: 315 mm Working Speed: 7 m/min Motor Power: 7.5 kW Length: 2000 mm Width: 1450 mm Height: 1700 mm Weight: 3650 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 5 kW (6.80 HP), STANDARD EQUIPMENT Welded steel construction body Three rollers with motor drive Shafts hardened and ground from special high-strength material Horizontal and vertical working position Hardened standard rolls Movable control panel separated from the main body Manually adjustable mechanical side supports movable in 3 directions Precision bending with braked motor Two digital indicators OPTIONAL EQUIPMENT Rolls for bending pipes and profiles Optional 2-axis hydraulic side supports Automation via NC control TECHNICAL SPECIFICATIONS Upper shaft diameter: 80 mm Fgjdpfxow Smibj Ah Uji Lower shaft diameter: 70 mm Roll diameter: 245 mm Working speed: 7 m/min Motor power: 4.75 kW Length: 1500 mm Width: 1000 mm Height: 1400 mm Weight: 1645 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 4 kW (5.44 HP), STANDARD EQUIPMENT Welded steel construction body Three-rolls driven by motors Hardened and ground shafts made from special high-strength material Horizontal and vertical working positions Hardened standard rolls Movable control panel separate from machine body Three-way adjustable mechanical manual side supports Precise bending with braked motor Digital displays (2 units) OPTIONAL EQUIPMENT Rolls for pipe and profile bending Optional two-axis hydraulic side supports Automation with NC control TECHNICAL SPECIFICATIONS Upper Shaft Diameter: 60 mm Lower Shaft Construction: 50 mm Roll Diameter: 180 mm Working Speed: 6 m/min Motor Power: 3.75 kW Length: 1200 mm Width: 850 mm Fgedpfx Ahsw Smhwj Uoi Height: 1200 mm Weight: 955 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, roller length: 2,550 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulically actuated body-mounted pistons. Fsdpfxow Smfcj Ah Uogi * Protected against overload. * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven). * The positions of the rolls can be easily read through three digital display gauges. * The hydraulically opening head and automatic upward-lifting shaft allow easy removal of the bent workpiece. * Very user-friendly operation with a mobile control panel. * Welded steel construction body. * Rolls made from SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680). * Dual-speed operating system. OPTIONAL EQUIPMENT * Automation with NC and CNC control consoles. * Upper crane (hoist) for support in large diameter rolling. * Hydraulic side supports for large diameter rolling. * Hydraulic plate ejector system. * Ground and polished rolls for special applications. * Infinitely variable speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 10/12 mm Bending: 12/16 mm Upper & Lower Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 3,100 mm, sheet thickness (max.): 20 mm, STANDARD EQUIPMENT * Lower, top and side rolls move up and down linearly via pistons hydraulically attached to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * The position of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 12/16 mm Bending: 16/20 mm Top & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Fodpfsw Smdfox Ah Usgi Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, roller length: 4,100 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * Lower and side rolls are connected to the body by hydraulic pistons and perform vertical linear movement * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (3 roll motor drive) * Roll positions are easily read via three digital indicators * Hydraulic opening head and automatic upper shaft lift allow easy removal of rolled parts * Easy operation using a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operating system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports to assist with large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-bending : 10/12 mm Fjdpfsw Smc Iex Ah Uegi Bending : 12/16 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2250 mm Height : 2350 mm Weight : 22000 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 2,550 mm, sheet thickness (max.): 25 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls are hydraulically actuated and move linearly up and down via body-mounted pistons * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roller motor drive system) * Positions of the rolls can be easily read via three digital displays * The hydraulically opening head and automatically upward-moving shaft make it easy to remove the bent workpiece * Extremely easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone rolling system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support in large diameter rolling * Hydraulic side supports for large diameter rolling * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Rolling Length: 2550 mm Pre-bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Fodpfx Ajw Smb Rsh Usgi Weight: 12,800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, roller length: 3,100 mm, sheet thickness (max.): 30 mm, STANDARD EQUIPMENT * The bottom, top, and side rolls move linearly up and down via hydraulic cylinders connected to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor drive) * The positions of the rolls can be easily read via three digital displays * Thanks to a hydraulically opening head and an automatically lifting shaft, bent workpieces can be easily removed * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 – 320 – 350 – 380 – 400 – 460) * Electronic balancing system (Ø500 – 550 – 580 – 620 – 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet extraction system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 – 320 – 350 – 380 – 400 – 460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Bending Capacity: 25/30 mm Top & Bottom Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Fodpfxsw Sl T So Ah Uogi Weight: 20,200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 460 mm, roller (top) diameter: 460 mm, side roll diameter: 380 mm, roller length: 4,100 mm, sheet thickness (max.): 25 mm, power: 38.5 kW (52.35 HP), STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls driven by hydromotor and planetary gearbox (all three rolls are motor-driven) * The position of the rolls can be easily read via three digital displays * Thanks to the hydraulically opening head and automatically lifting shaft, the bent workpiece can be easily removed * Very easy operation with a movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control automation * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending Thickness: 16/20 mm Fgodpfow Sl I Nox Ah Uji Bending Thickness: 20/25 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2300 mm Height: 2350 mm Weight: 29,500 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT - Highly suitable for bending light and medium sheet, aluminum, or stainless materials - Highly suitable for bending round materials and materials of various diameters - Bottom and side rolls are hydraulically driven up and down with direct linear movement - Protected against overloading - The top roll is driven by an electric motor and planetary gearbox. The bottom roll is driven by a cardan coupling system. Two rolls are driven - Position of the rolls can be easily read with three digital indicators - The hydraulically opening head allows easy removal of the bent workpiece - Very easy operation with a movable control panel - Welded steel construction body - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Conical bending system - Hydraulic balancing system for parallel movement of the rolls - Complies with EU safety standards and has CE marking - User manual OPTIONAL EQUIPMENT - Remote support with NC control - Top crane (lift) for supporting large diameter bending - Hydraulic side supports for supporting large diameter bending - Ground and polished rolls - Dual speed adjustment system - Stepless speed adjustment - Hydro-motor driven rotation - Ejector system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg Fodow Slxzspfx Ah Uegi

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Particularly suitable for bending light and medium gauge sheet, aluminium or stainless steel materials - Ideal for round and various diameter material bending applications - Lower and side rolls move vertically through direct hydraulic linear motion - Protected against overloading - Top roll is driven by an electric motor and planetary gearbox. Bottom roll is driven by a cardan coupling system. Two rolls are drive-powered Fgjdpfx Asw Sllhjh Uoi - Roll positions are easily read via three digital displays - The hydraulically opening head allows easy removal of the bent workpiece - Very easy operation via a mobile control panel - Welded steel construction body - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Cone bending system - Hydraulic balancing system for parallel movement of the rolls - Compliant with EU safety norms and carries the CE mark - User manual OPTIONAL EQUIPMENT - Remote service via NC control - Top crane (hoist) for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Dual Speed Adjustment System - Infinitely variable speed adjustment - Hydromotor-driven rotation - Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 6100 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet metal, aluminum, or stainless steel materials Highly suitable for bending materials into round and various diameters Lower and side rolls move up and down hydraulically via direct linear motion Protected against overload Upper roll driven by electric motor and planetary gearbox. Lower roll driven by cardan coupling system. Both rolls are driven Positions of the rolls easily readable via three digital displays Bent workpiece can be easily removed thanks to the hydraulic opening head Very easy operation with mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Cone bending system Hydraulic balancing system for parallel movement of the rolls Conforms to EU safety standards and bears the CE mark User manual OPTIONAL EQUIPMENT Remote assistance with NC control Overhead crane (elevator) support for large-diameter bending Hydraulic side supports for large-diameter bending Ground and polished rolls Dual-speed adjustment system Infinitely variable speed adjustment Rotation driven by hydromotor Extractor system Fgodow Slkkepfx Ah Uoi TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 2,050 mm, sheet thickness (max.): 22 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic cylinders * Protected against overloading * All rolls are driven by hydromotor and planetary gearbox * Folded parts are easily removed thanks to the hydraulically opening head * Very easy to operate with movable control panel * Lower roll positions are easily read via two digital indicators * Welded steel body construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Bearing-supported conical bending system * Hydraulic balancing system ensures parallel movement of shafts * Extended shaft ends for mounting profile and pipe bending rolls OPTIONAL EQUIPMENT * Upper crane (hoist) for support in large diameter bending * Hydraulic side supports for assistance in large diameter bending * Ground and polished rolls for special applications * Rollers for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16/20 mm Bending: 20/22 mm Top & Bottom Roll Diameter: 300 mm Side Roll Diameter: 280 mm Motor Power: 11 kW Fgsdpfxsw Slg Ss Ah Uei Bending Speed: 5 m/min Length: 4100 mm Width: 1500 mm Height: 1550 mm Weight: 7400 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 2,550 mm, sheet thickness (max.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons Fgsdpfxjw Slf Uo Ah Uoi * Equipped with overload protection * All rolls are driven by hydromotors and planetary gearboxes * Hydraulic opening head allows easy removal of curved parts * Very easy operation with movable control panel * Lower roll positions can be easily read using two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Bearing-mounted conical bending system * Hydraulic balancing system provides parallel movement of shafts * Extended shaft ends to allow mounting of profile and pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special operations * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 12/16 mm Bending: 16/18 mm Upper & Lower Rolls: 300 mm Side Rolls: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 3,100 mm, sheet thickness (max.): 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls driven by hydromotor and planetary gearbox * Hydraulically opening head for easy removal of bent parts * Very easy operation with mobile control panel * Lower rolls positions easily read via two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile- and pipe-bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Rollers for profile bending * Infinitely adjustable hydraulic speed control * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 10/13 mm Bending: 13/15 mm Fsdpfx Ahew Sld Rj Uegi Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Weight: 9050 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Fedpsw Slctjfx Ah Usgi Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system Fgjdow Slcgopfx Ah Uji - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Fgjdpjw Slbvefx Ah Usi Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: new, Year of construction: 2024, pressing force: 100 t, table width: 800 mm, table length: 800 mm, Equipment: safety light barrier, COUNTRY OF ORIGIN : TURKEY WARRANTY PERIOD : 24 MONTHS DELIVERY TIME : READY STOCK FOR 100/40 TONS COLUMN HYDRAULIC PLASTERING PRESS TECHNICAL SPECIFICATIONS TYPE 4 COLUMN COLUMN SHAFT DIAMETER Ø 90 mm - 4 pcs. Induction chrome plated shaft CAPACITY (RAM) 100 TONS CAPACITY (POT) 40 TONS DISTANCE BETWEEN COLUMNS 800 x 800 mm USEFUL USABLE AREA 800 x 1100 mm PARALLEL TOLERANCE 120 micron/mt. Steepness TOLERANCE 60 micron/mt. STROKE (BOOT) 600 mm STROK (POT) 200 mm MIN. spacing 100 mm MAX. SPACING 700 mm WELD TENSION REMOVAL Stress relief by vibration WELDING APPLICATION - EN ISO 15614-1/2017 welding application certificate accredited by WPQR and WPS accredited by TÜRK-AK. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) Proportional Speed Application The system is designed as a proportional speed feature. By entering different speed and stop values at different points of the pressing process, the effect of material and mold deformations on the work done is minimized. MAX. working pressure 250 Bar TOTAL MOTOR POWER 15 kW- IE3 Fsdpfevkvu Tex Ah Ujgi MAIN PUMP 23 cm³ - VICKERS MOVABLE TABLE FAST DESCEND SPEED 150 mm/sec. - Proportional Adjustable MOVABLE TABLE PLOWING SPEED 15 mm/sec. - Proportional Adjustable MOVING TABLE RETURN SPEED 150 mm/sec. - Proportional Adjustable POT TABLE FORWARD SPEED 30 mm/sec. - Proportional Adjustable POT TABLE RETURN SPEED 70 mm/sec. - Proportionally Adjustable MAIN CYLINDER INNER DIAMETER Ø 220 mm - Ck45 POT CYLINDER INNER DIAMETER Ø 140 mm - Ck45. AUXILIARY ACCELERATING CYLINDERS Ck45 - 2 pcs. APPROXIMATE HEIGHT OF PRESS 3900 mm APPROXIMATE WIDTH OF PRESS 1110 mm APPROXIMATE DEPTH OF PRESS 1110 mm LOWER TABLE HEIGHT FROM THE GROUND 1100 mm HYDRAULIC UNIT VICKERS COOLING SYSTEM (with fan) CIESSE LEVEL INDICATOR DONALTSON AIR FILTER CIESSE RETURN FILTER DONALTSON OIL AND HEAT INDICATOR DONALTSON VALVES USED EATON FILTER POLLUTION WARNING ELECTRONICALLY CONTROLLED AUTOMATIC LUBRICATION - (CAN BE SET ON THE SCREEN) RAM STROKE CAN BE ADJUSTED FROM THE SCREEN POT STROKE CAN BE ADJUSTED FROM THE SCREEN RAM TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN POT TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN SYSTEM ERROR INFORMATION CAN BE SEEN ON THE SCREEN PRESS STATUS INFORMATION CAN BE SEEN ON THE SCREEN MOLD MEMORY CAN BE SET FROM THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION CAN BE SEEN ON THE SCREEN LINEAR DISTANCE DIAGRAM NOVATECHNIK or TURCK PLC APPLICATION DELTA TOUCH PANEL SCREEN DELTA 7'' SWITCHGEAR SIEMENS - SCHNEIDER SAFETY PLC PILZ PNOZ MULTI BEAM BARRIERS LEUZE - 2 tk. APPROX. WEIGHT 5.5 TONS

Condition: new, Year of construction: 2025, throat depth: 280 mm, ram adjustment: 85 mm, table height: 755 mm, drop-through hole in table: 190 mm, table width: 540 mm, table length: 740 mm, stroke adjustment: 100 mm, pressing force: 80 t, ram bore: 40 mm, power: 7.5 kW (10.20 HP), punching force: 80 t, Equipment: safety light barrier, A TYPE ECCENTRIC PRESSES GENERAL FEATURES  Steel construction body,  Stress relief will be applied to the body and welded parts with vibration.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 8 slides  Parts such as ram, connecting rod, claw are cast steel, GS52  High strength solid crankshaft – 4140  Inside of connecting rod will be bronze, (Zr14)  With spare table,  With hydraulic fuse  Ratchet apparatus table-ram adjustment  Automatic central lubrication,  Pneumatic pedal with ratchet and double hand control with time adjustment,  With electric counter,  PLC application and touch screen – DELTA  Electrical switchgear materials – SIEMENS-SCHNEIDER  Double coil safety valve – GPA, TOPAIR  Locked position switch and panel,  OPTIONAL FEATURES  CE application  Finger protection beam barriers – SICK, LEUZE, KEYENCE Fgjdovxtgiopfx Ah Uji  Security PLC (Controls the entire electrical system, valve, double and pedal) – PILZ  Safety wedge,  Protective enclosures will be within the scope of CE.  Speed Control Application  Automatic Lubrication System BODY A TYPE MONOBLOCK BODY TYPE A SERIES Capacity 80 Tons Throat Depth 280 Mm Table-Ram Distance 400 Mm Slide-Table Distance 420 Mm Wall Distance 470 Mm Ram Adjustment 85 Mm Press Width 1000 Mm Press Depth 1735 Mm Press Height 2300 Mm Front Anchor Dimension 720 Mm Side Anchor Dimension 1040 Mm Table Hole Diameter 190 Mm Table Size 540 / 740 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 370 / 230 Mm Floor Table Dimensions 755 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/Min. Motor Power 7.5 KW Motor Speed 1450 RPM Weight 4,500 Kg ROLL UNCOUNTER AND ROLL DRIVER WILL BE PRICED EXTRA IF REQUESTED. IT IS NOT INCLUDED IN THE PRICE OF THE PRESS.

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 750 mm, table length: 1,000 mm, stroke adjustment: 140 mm, pressing force: 130 t, ram bore: 55 mm, punching force: 130 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD EQUIPMENT • Steel Construction Frame • Gear Unit Operating in Sealed Oil Bath • Four-Sided Bearing Alignment • Nodular Cast Iron Connecting Rod and Crank Bearings • Crankshaft and Drive Shafts Manufactured from 4140 Tempered Steel • Centralized Fully Automatic Grease Lubrication System • Pneumatic Clutch and Brake System • CE-Conformant Safety Standards • Dual-Base Safety Valve • Manually Adjustable Stroke • Photocell Safety Light Curtain • PLC Control System • Touchscreen LCD Panel (for 150-300 ton models) • Dual-Hand Safety Pedal Control System • Mechanical Safety Fuse System • Hydraulic Safety Fuse System (for 200-300 ton models) • Emergency Reverse Motor Motion • Complies with Occupational Health and Safety Regulations • Anti-Vibration Mounts • CE Certified • Models Available from 20 Tons to 300 Tons • 24-Month Warranty • Country of Origin: Turkey TECHNICAL SPECIFICATIONS CECP 130 C-TYPE MONOBLOCK FRAME Capacity: 130 Ton Throat Depth: mm Fodpsvtyvgofx Ah Uogi Table-to-Ram Distance: 475 mm Ram Adjustment: 80 mm Press Width: 1600 mm Press Depth: 2000 mm Press Height: 3000 mm Table Hole Diameter: 220 mm Table Dimensions: 750 x 1000 mm Die Tie Rod Hole Diameter: 55 mm Ram Face Dimensions: 350 x 550 mm Table Height from Floor: mm Stroke: 20 – 140 mm Strokes per Minute: 45 spm Motor Power: 7.5 kW Motor Speed: 1400 RPM Weight: 6,000 kg • As a manufacturer, technical specifications may be modified upon request.

Condition: new, Year of construction: 2025, throat depth: 370 mm, table width: 700 mm, table length: 1,200 mm, pressing force: 300 t, power: 30 kW (40.79 HP), punching force: 300 t, warranty duration: 24 months, Equipment: safety light barrier, C TYPE ECCENTRIC PRESSES GENERAL FEATURES - Steel construction frame - Stress relief on the frame and welded parts by vibration - Table-to-table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy Fjdpfow E Rkqjx Ah Ujgi - Ram supported by 4 guides - Parts such as ram, connecting rod, and slide block are made of cast steel, GS52 - High-strength one-piece crankshaft – 4140 - Bronze bushings in the connecting rod (Zr14) - Equipped with spare bolster table - Table-to-ram adjustment by ratchet gear (motorized for 150 tons and above) - Manual central lubrication - Pneumatic foot pedal with locking and time-controlled dual hand control - Electric counter - PLC application and touchscreen – DELTA - Electric switching components from SIEMENS-SCHNEIDER - CE application OPTIONAL - Finger protection light barriers – SICK, LEUZE - Safety PLC (controls entire electric system, valves, dual control, and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Lockable limit switch and control panel - Safety block - Protective guards in accordance with CE regulations TYPE C TYPE MONOBLOC FRAME Capacity 300 Ton Throat Depth 370 mm Table-to-Ram Distance 530 mm Slide-to-Table Distance 650 mm Distance Between Walls 470 mm Ram Adjustment 150 mm Approx. Press Width 2000 mm Approx. Press Depth 2700 mm Approx. Press Height 3200 mm Front Anchor Size 940 mm Side Anchor Size 1440 mm Table Hole Diameter 260 mm Table Size 700 / 1200 mm Die Mounting Hole Diameter 60 mm Ram Size 780 / 400 mm Table Height from Ground 810 mm Stroke Adjustment 20 / 200 mm Strokes per Minute 38 spm Motor Power 30 + 2.2 kW Motor Speed 1450 RPM Approximate Weight 13,200 kg

Condition: new, Year of construction: 2025, throat depth: 350 mm, drop-through hole in table: 250 mm, table width: 1,100 mm, table length: 700 mm, stroke adjustment: 190 mm, pressing force: 250 t, ram bore: 60 mm, power: 22 kW (29.91 HP), punching force: 250 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD HARDWARE Below are the technical specifications and general features for the 250-300 ton C-type eccentric press you inquired about. - Welded steel construction frame - Stress-relieved and welded components by means of vibration - Parallelism and rigidity tolerance between tables in compliance with ISO and DIN standards - Pneumatic clutch and brake combination - OMPI (Italy) - Components such as ram, connecting rod, worm gear, in steel casting GS52 - High-strength solid crankshaft – 4140 grade - Connecting rod lined with bronze (Zr14) - Spare bolster plate - Mechanical interlock safety device - Ratchet mechanism for bolster/table adjustment - Manual central lubrication system - Pneumatic pedal with lock and dual control, adjustable timing - Electric stroke counter - PLC integration and production line display – DELTA - Electrical switchgear components by SIEMENS and SCHNEIDER - CE conformity - Finger protection light curtains – SICK, LEUZE, KEYENCE - Safety PLC (oversees all electrical systems, valves, dual and pedal systems) – PILZ - Dual solenoid safety valve – GPA - Locked position switch and control panel - Mechanical safety wedge - CE-compliant protective enclosures TECHNICAL SPECIFICATIONS Fgjdevtyy Sjpfx Ah Uoi Type: C-TYPE MONOBLOCK FRAME Capacity: 250 Tons Throat Depth: 350 mm Table-to-Ram Distance: 520 mm Table-to-Guide Distance: 630 mm Frame Width: 520 mm Ram Adjustment: 150 mm Press Width: 2000 mm Press Depth: 2500 mm Press Height: 3100 mm Front Mounting Holes: 930 mm Side Mounting Holes: 1430 mm Table Bore Diameter: 250 mm Table Dimensions (W x L): 700 x 1100 mm Die Tie Rod Hole Diameter: 60 mm Ram Face (W x L): 670 x 380 mm Table Height from Floor: 810 mm Stroke: 20 - 160 mm Strokes per Minute: 40 spm Motor Power: 22 + 2.2 kW Motor Speed: 1450 RPM Weight: 12,000 kg *As a manufacturer, technical specifications are subject to change upon request. OPTIONAL EQUIPMENT (NOT INCLUDED IN PRICE) - 8-point slide adjustment & hydraulic safety system - Speed control - Automatic lubrication system