Used Cross Cutter for sale (7,195)

Condition: like new (used), Year of construction: 2019, Ref: 11072 . 2019 Horizon RD-4055 Dual Cylinder Rotary Die Cut System Like new, ex demo condition - ONLY 5,000 on the counter! Efficient production with new separator and card stacker for labour saving operation. Features: • Die cutting, waste separation and stacking in one pass for efficient production. • A wide range of applications can be processed such as business cards, greeting cards, labels and light packages. • Maximum 6,000 sheets can be processed. • 21-up round corner business card production can processed at 126,000 cards per hour. • Simple and easy operation without relying on a skilled operator. • Uniquely designed servo motor controlled ‘Repeat-cut’ feature allows multiple-up cuts from a single up die to minimize die cost. • Ruggedly constructed yet compact compared to normal die cutters. • Various delivery options are available to process a wide range of applications. • Die-cutting and Kiss cutting can be performed simultaneously by using a die which has two different blade heights, ideal for making stickers and labels. • Creasing can be achieved to avoid image cracking. Suitable for boxes, pocket folders and greeting cards which require additional folding processes after die cutting. • Repeat-cut enables the running of multiple up imposed applications with a smaller die to reduce die cost (Up to 8 repeats) Equipped with: TOUCH PANEL: Both setup and control can be done through the intuitive touch screen. After mounting the upper and lower die, the system can be set up by simply inputting sheet size and product size. The graphical illustrations on the screen are simple and easy to understand. FEED SECTION: Vacuum belt feeding enables superior feeding with easy setup and operation. An ultrasonic sensor is used for double feed detection on a wide range of substrates. The optional code reader BR-N4055 enables job separation for easy handling. TRANSPORT SECTION: Sheets are registered by vacuum belt and position is firmly secured with gripper rollers for accurate and consistent register. Servo motor driven gripper rollers ensure the die cut position without effecting processing speed. The optional alignment detection sensor ADS-N4055 detects the alignment error for additional quality control. DIE CUTTING SECTION: Rigid magnetic upper roller and solid lower anvil cylinder ensure high quality die cutting. Uniquely designed die cutting section enables easy and quick die setting. Specification: Sheet Size (Before processing): Max. W400 x L550 mm or W15.740" x L21.650" Min. W200 x L275 mm or W7.875” x L10.830” Processed Material: Normal paper, Coated paper, Cardboard Material Thickness: 127.9 to 400 gsm Die Cutting: Max. 0.5 mm or 0.019” (In case of blade height: 0.8 mm or 0.031”) Max. 0.3 mm or 0.011” (In case of blade height: 0.6 mm or 0.023”) Creasing: Max. 0.4 mm or 0.015” (In case of blade height: 0.8 mm or 0.031”) Ncjdeymmqzepfx Acnsu

Condition: excellent (used), Year of construction: 1985, Ref:11083 . 1985 COMO 220 MC2 Guillotine. Swedish built heavy-duty guillotine for accurate cutting of paper and heavier substrates. Refurbished 2010 and upgraded to computer programme. Comprising; Right side table to facilitate rear loading of cutting bed Central air table Steel side tables Computer programme cut control, with keypad input of data Twin cut control buttons Variable pressure clamp control Swift knife change system and adjustment Powered variable speed back gauge I.R. light beam guarding to UK HSE spec. 2 x HSS knives Including knife change tools and accessories. Ncsdpfjy Awy Hjx Acnou Specification: Cut width, Max: 220 cm Cut depth, Max: 220 cm Clamp opening :18.5 cm Electrics: 415V, 30A, 50Hz

Condition: excellent (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 08/2027, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2026, Breadcrumb Crusher Hommel Rotormat 2000 Super "the universal crusher" Stainless steel design High-performance Connection: 400V, 16A CEE plug Dimensions: 690 x 650 x 1550 mm (W x D x H) Used machine, cleaned Comes with warranty We have many other machines in stock! Nedpsy Hwc Aefx Acnjcu

Condition: used, Year of construction: 1980, Used machine Condition: various small defects Ncsdjw I U Nhspfx Acnsu without chains Equipment and technical data: Stroke left/right: 150 mm, Top/bottom stroke: 150 mm Motor: 1.5 kW Can be used as a spare parts carrier Availability: short term Location: Flörsheim

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Colour: Grey Weight: 1.600 kg Nedpfx Asyf H H Hocnjcu - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 595001 3 16 - Main motor power [kW]: 6.5 - Voltage [V]: 400 - Current consumption [A]: 15 - Fuse [A]: 20 - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SCM internships in excellent condition Nodpfxet Hkq Rj Acnocu

Condition: like new (used), quantity 18 set Assorted Frömag grooving cutters, sold as a set -> 6x 6P9 - 15° Ø18-20 - A61 -> 2x 6P9 - 15° Ø17-18 - A60H / A60 -> 1x P59 - 15° - A-SO-60 -> 2x P59 - 15° - A51 Ncedpfx Acjzf Np Ajnju -> 3x 4P9 - 15° Ø13-15 - A40 -> 1x 4P9 - 15° Ø12 - A40 -> 1x 3P9 - 15° Ø13-15 - A30 -> 2x 6 - Ø18-20 Individual purchases also available—just ask

Condition: used, quantity 23 Set Various grooving cutters for sale as a set Hünnema: -> 1x GH7 - 15° Ø18-20 -> 4x 6P9 - 15° Ø18-19 - A54W -> 1x 5P9 - 15° Ø15-17 - A34 WGW: -> 4x 5P9 - Ø13-15 - W50 TGW: -> 4x 4P9 - Ø13-15 - W50 -> 1x 5P9 - Ø16-17 - W53 Ncedpfxjzf Npij Acnou -> 8x 6P9 - Ø18-19 - S54

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Well-maintained condition With 3 tool positions Swiveling table for the production of studio windows and segments for arches Precise angle display via encoder with 1/10 degree resolution Nodpfx Acozalmzenecu The automatic splinter guard remains in the tool cutting plane for every angle setting Automatic length compensation via a special guide rail and compensation stop Quick-release mechanism in the 90-degree position Automatic splinter guard change over the entire swivel range of +/- 65 degrees Cut-off saw: Spindle arrangement: top Three-phase motor: 3 kW Spindle diameter: 30 mm Speed: 2800 rpm Protective and extraction hood with extraction nozzle: 100 mm Slitting spindle: Power: 7.5 kW Speed: 4000 rpm Useful length: 300 mm Spindle diameter: 50 mm Max. tool diameter: 400 mm 2 x 100 mm stroke for 3 tool positions Protective and extraction hood with extraction nozzle: 180 mm Automatic brake with speed monitoring With length stop system LA-2000, battery-powered With LED display with display accuracy up to 0.1 mm With laser Weight: 850 kg Dimensions: 2250 x 1880 x 1800 mm Availability: short notice Location: Röllbach

Year of construction: 2022, condition: used, Used machine Ncodsyq T I Iopfx Acnou Window joint cutter Features and technical data: - Power input: 1900 W - Output power: 1220 W - No-load speed: 7800 rpm - Milling disc max.: 170 mm - Cutting depth: 0–55 mm - Cutting height/joint width from 4.7 mm - Cutting height adjustment in 2 mm increments - Minimum distance to lower support surface: 2.5 mm - Swivels 180° - Spindle thread: M 14 - Weight: 4.5 kg - Sound pressure level LpA: 99 dB(A) - Sound power level LWA: 110 dB(A) Availability: short-term Warehouse location: 63934 Röllbach

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Equipment and technical data: - Designed for all window tooling systems up to 400 mm tool diameter - The machine can be stopped in just a few seconds thanks to the standard braking systems (foot brake for slot spindle, automatic electronic safety brake for saw) Ncodpfx Acjxymfdonju - The protective covers for the slot spindle and crosscut saw are designed to allow easy and straightforward tool changes without having to remove the covers themselves - The crosscut saw can be conveniently adjusted from the operator's position using a quick adjustment feature. A six-position turret head allows for rapid changeover to different dimensions - The 40 mm slot spindle can be precisely adjusted in height using an ergonomically positioned handwheel with 0.1 mm graduations - The robust roller table, combined with hardened and ground guides, can be easily moved with minimal effort - Slot spindle motor: 5.5 kW - Slot spindle speeds: 3000/4500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm - Slot spindle height adjustment: 100 mm - Extraction port: 120 mm - Crosscut saw motor: 2.2 kW - Crosscut saw speed: 2950 rpm - Saw blade mount: 30 mm - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm - Pneumatic tool clamping - With Festo-LAS fence Weight: approx. 600 kg Availability: short term Location: Röllbach

Condition: used, Weinig Powerlock L=240 Z=2 head with rebate cutter below Type 536, diameter 93 mm 536.095.04 Nodjzdq Htjpfx Acnocu Centrolock reversible knife system Z2 Mounting: PowerLock HSK Length: 240 mm Price: 425 Euro

Condition: good (used), Laksa KU130 Bowl cutter Stainless bowl cutter, 130L capacity bowl, six blade assembly, with discharge arm, mitsubishi touch screen hmi controls, modified to run on an AC motor with Allen Bradley Powerflex753 inverter drive, with manual, 3Ph Ncsdpfxowaan Ie Acnju

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Ncedpfezdn H Rox Acneu Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: Njdpfx Ajzdnxgjcnjcu The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Fill 3D Ultrasonic Cutter Here we offer a Fill 3D ultrasonic cutting system. FILL 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasound-actuated cutting systems. Your advantages: Ergonomic loading and unloading Simple creation of cutting programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic cutter with low space requirements and simple kinematics. The Siemens CNC 840 D control system allows the cutting device to be programmed like a machine tool. Tool corrections or path changes can be easily carried out directly on the machine. As standard, the machine is equipped with a 20 kHz ultrasonic cutting unit. However, it can also be equipped with alternative systems. The cutter is equipped with a separate rotary axis to allow cutting of tight radii and to save other axis movements (5 + 1 axes). Technical data: Machine data Part length max. 1,000 mm Part width max. 900 mm Part height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control Siemens Sinumerik 840D sl Technical data overall system: Fill 5-axis guided CFRP cutting system Type: SM - 03 Electricity: Supply voltage: 3 x 400 V AC Supply frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Nsdpfxozdy Iao Acnjcu Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3,920 mm Width: approx. 3,400 mm Height: approx. 3,500 mm Weight: Total weight: approx. 1,500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Type: Fill 5-axis guided CFRP cutting system Type: SM - 03 Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2023, Overview The Duplo DC-618 Slitter Cutter Creaser is a compact yet highly capable all-in-one finishing solution designed specifically for today’s digital print environment. Professionally refurbished by Glendale engineers and presented in exceptional condition, this 2023 model (first installed in 2024) offers a rare opportunity to purchase one of Duplo’s most popular and versatile multifunction finishing systems at a significant saving over new. Designed to eliminate white borders and toner cracking commonly associated with digitally printed applications, the DC-618 combines precision slitting, cutting and creasing in a single automated process. Capable of processing up to 6 slits, 30 cuts and 20 creases in one pass, the system delivers fully finished applications at speeds of up to 23 sheets per minute. Nedpfx Aezgunyecnscu This refurbished DC-618 has been prepared to a working ‘as new’ standard and benefits from several new rollers, feed belts, covers, guides and replacement drive components including gears and cogs where required. The machine is supplied complete with PC, monitor, keyboard, mouse and updated software, ensuring it is production ready for immediate installation. Ideal for business cards, greeting cards, brochures, invitations, postcards, tickets and other full-bleed applications, the DC-618 provides exceptional automation, fast setup and highly accurate finishing performance. Key Features Fully automated slitting, cutting and creasing in one compact system Processes up to 6 slits, 30 cuts and 20 creases in a single pass Produces full-bleed applications without white borders or toner cracking Output speeds up to 23 sheets per minute Rotary slitting system with precision guillotine cutter Adjustable depth creasing system for optimised fold quality across varying stock weights Integrated CCD barcode reader for automatic job recall and setup Registration mark reading system compensates for image shift ensuring accurate finishing User-friendly Windows PC interface with unlimited job storage Colour LCD control panel with storage for up to 250 jobs onboard Oversize feed tray and stacker supports sheet lengths up to 750mm Card stacker for efficient collection of business cards and smaller finished pieces Jobs can be edited while running to minimise downtime and improve productivity What’s Included Refurbished Duplo DC-618 Slitter Cutter Creaser Windows PC with monitor, keyboard and mouse Updated operating software New rollers and feed belts Replacement covers and refurbished drive components where required Fully tested and production ready system Why Choose this Duplo DC-618 Professionally refurbished by Glendale engineers One of Duplo’s best-selling multifunction finishing systems Excellent solution for short-run digital print finishing Highly automated setup reduces operator intervention and changeover time Exceptional versatility for a wide range of commercial print applications Compact footprint combining multiple finishing devices in one system Reliable, accurate and easy-to-use production workflow

Condition: excellent (used), Catalogue number 7940 TECHNICAL DATA - Max. saw blade diameter: 500mm - Spindle diameter: 30mm Ncodpfx Ajywtr Uocnju - Blade guard included - Hydraulic blade feed - Cutting height: 140mm - Main motor: 4.4kW - Table size (L/W): 570x870mm - Table height from base: 750mm - Roller tables: 2 pcs - Infeed roller table: 1170mm – Outfeed roller table: 1210mm - Sliding roller width: 600mm - Overall dimensions (without roller tables) L/W/H: 1040x820x900mm - Weight: approx. 570kg ADVANTAGES – Made in Germany – 2 roller tables – Pneumatic saw blade stroke – Used saw in perfect condition Net price: 13,900 PLN Net price: 3,300 EUR (based on exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7937 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW Nsdpfx Aoy Tw Skscnjcu - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Catalogue No.: 7858 ADVANTAGES – Polish production – for cross-cutting packages or round timber – unpainted – mobile, on wheels – used saw, in very good condition TECHNICAL DATA guide bar length: 2100 mm cutting length: 1900 mm Ncodjy Tw Apjpfx Acnju automatic lubrication of the cutting system damping and tension system in the head manual guide bar feed electric motor: 7.5 kW transport dimensions (L/W/H): 1900x900x2710 mm total weight: 205 kg Net price: 28,900 PLN Net price: 6,880 EUR (based on exchange rate 4.2 EUR) (Prices may change in the event of significant fluctuations)

Condition: used, Manufacturer: Seydelmann Model: K324AC8VA Year: 2018 Condition: Used Serial number: S8-00324-0256-18 Stock number: 3328 Bowl: 325 liters, 2 speeds Knife speed: 6 variable adjustable speeds Mixing: 2 mixing speeds, reverse Control: Auto-Command 1500K Vacuum pump: Elmo Rietschle L-BV5, 200 m3/h Compressed air: 6 - 10 Bar Water: 4 - 6 Bar Power: 3 x 400V, 50Hz, 157kW Dimensions: 2600 x 3650 x 1700 mm Weight: 4300 kg Includes discharge unit and BW200 lift. With water meter. Ncodpozdc Nuofx Acneu

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) Nodpfx Acoif Ek Ronocu (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool Ncsdpfxefnlkwo Acneu • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Bore diameter 40 mm weight ~ 100 kg Marking Ohne oder MEC Lot (approx. 25 pieces) of various milling cutters and milling cutter combinations, primarily for MEC feed or without markings. Nsdpfx Ajzfaw Rscnjcu

Condition: excellent (used), NET PRICE €9,500 DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Increase of the working area to: 300 x 260 mm Spindle speed: Vertical/Horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool shank: S20 x 2 (Deckel standard) Arbor travel: 60 mm Feed rate X/Z-axis: 5 – 500 mm/min Feed rate control: stepless Rapid traverse: X/Z-axis: 1200 mm/min Feed rate Y-axis: manual Ncedpfx Acsxyc N Ejnsu Fixed rotary table: 600 x 210 mm Swiveling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data is non-binding! Features: For horizontal machining, the milling head is swiveled by 90 degrees and moved backwards. 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 Stepless feed rate in X/Z-axis The machine was partially overhauled by a specialist company a few years ago. Equipment: 2-axis digital readout HEIDENHAIN Fixed rotary table Chip tray Machine light Machine feet Further accessories on request! Condition: good to very good, from a training workshop. Spindle play: X 0.05mm Y 0.15mm Z 0.2mm New machines weekly Subscribe to the profile & don't miss anything