Used Package Cross Cut Saw for sale (30,865)

Condition: used, functionality: fully functional, cutting height (max.): 1,200 mm, cutting width (max.): 1,200 mm, cutting length (max.): 6,000 mm, Package cutting saw for packages up to 1200 mm in height and 1200 mm in width, with powered infeed rollers. Lsdpfezxbg Tex Akqjru Includes a guide rail in like-new condition. Tagliopacchi for packages up to 1200 mm in height and 1200 mm in width with motorized infeed rollers.

Year of construction: 2025, condition: new, functionality: fully functional, new mobile package cutting saw, Holtec Piccolo Ledpfxeh Imuvo Akqsru ideal for making initial, final, and cross cuts on packages of lumber chain set with STIHL chain, type Rapid Super 0.404", for extremely fine surfaces and double-sided, adjustable guide rails (four-way reversible) electric motor, 5.5 kW high cutting capacity for packages up to 1.10 m x 1.10 m and roundwood diameter up to 1.30 m bar length: 1.60 m 400V, 50 Hz 1 year warranty immediately available from stock

Year of construction: 1990, condition: used, A mobile package crosscut saw for sawn timber is offered. Guide bar length: 1200mm, guide bar type: STIHL, chassis: manually movable, control: manual. Equipped with STIHL guide bar, robust chassis with pneumatic tyres, CEE plug with cable, protective guard. Weight: approx. 250kg, overall dimensions X/Y/Z: approx. 1500mm/800mm/2500mm. Inspection by arrangement is possible. Lodpjzyq Tfsfx Akqjru

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, For industrial sale, a fully automated saw for cutting lumber packages and structural elements – a complete technological line for formatting packages to a specified length. The device is designed for use in sawmills and wooden structure manufacturing plants, where process efficiency, consistent cutting length, and package stabilization during cutting are crucial. Inspection and testing are possible at Delfina 20, 98-354 Siemkowice, POLAND. Operating parameters: • Max. package: 1300 × 1300 mm (width / height) • Max. input package length: 6000 mm • Max. cutting length: 3000 mm • Min. cutting length: 600 mm • Max. package weight: 8000 kg • Cutting accuracy: ±2 mm The minimum package cross-section is determined by the extreme position of the hydraulic clamps – cutting packages with smaller dimensions is permissible. Cutting module: • Main motor 11 kW • HIWIN linear guides with increased load capacity • GB TITANIUM guide + STIHL chain • Automatic guide lubrication system The rigid construction of the unit ensures stable operation and consistent cutting length. Package stabilization: • System of 6 hydraulic clamps (top + side + front and behind the cutting line) • Package support on vertical rollers • Elimination of package movement during saw entry Process automation: • Intelligent package strapping system • Automatic determination of strapping locations • Option for automatic initial cutting • Buffer for cut packages Transport and handling: • Transverse loading conveyor • Transverse unloading conveyor • Automatic package pickup after cutting Waste removal: • Belt conveyor for waste (~10 m) • Hydraulic tilting rollers of the cutting module (protection against large waste jamming) Automation: Lrsdpfxexn Rt Uo Akqeu • Siemens PLC controller • Yaskawa servo drive and inverters • 21–22” operator panel • Remote service and diagnostics Additionally: • Winter package – heating of the control system • Transport to the customer – included in the price • Installation – included in the price • Commissioning – included in the price • Operator training – included in the price

Condition: excellent (used), mobile chop saw, 11 kW guide rail, 1.3 m cutting length planer chain for 1.3 m cutting length Lrsdpfxoz Aac Is Akqeu

Condition: used, Year of manufacture: 2002 Colour: Green Weight: 400 kg - Year: 2002 - CE marking present: Yes - Serial number: 2002/15/20 - Main motor power [kW]: 3.0 - Max. cutting height [mm]: 170 - Max. saw blade diameter [mm]: 420 - Arbor saw blade diameter [mm]: 40 - Table length [mm]: 720 - Table width [mm]: 540 - Spindlespeed: Manual Lrsdpfx Aks Abr U Rjqju - Max. spindle speed [rpm]: 2710 - Max. spindle speed [rpm]: 2710 - Voltage [V]: 400 - Current consumption [A]: 6.4 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport weight [kg]: 400kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2012, BANDSAW TEBA 310 -CE marking -Year of manufacture 2012 -Maximum cutting capacity 310 mm -Conventional / Semi-automatic Ledpfoz Di Slsx Akqjru -Miter cutting device -Coolant system -Cutting speed / Infinitely adjustable -Total power 3 kW -Saw blade dimensions 3990x27x0.9 mm -Approx. 20 spare saw blades Dimensions: L x W x H 1.7 x 1.2 x 1.9 meters / Weight approx. 1100 kg Errors and omissions excepted.

Condition: used, Holtec package cross-cut saw - hydraulic lowering of the saw blade Lodoxzr Efepfx Akqsru - length measurement - hydraulic package ejection

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8384, total length: 144,400 mm, total width: 4,400 mm, total height: 4,000 mm, used Holtec miter saw, in operation until recently. Lrjdpfx Akezp Rn Ueqju

Condition: used, Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: - Cutting height: max. 120 mm - Feed length: max. 5,500 mm - Cutting width: max. 700 mm - Saw blade diameter: max. 700 mm Lrjdpfx Aszryvaekqou

Condition: excellent (used), Catalog number: 7937 TECHNICAL DATA - max. disc diameter: 500mm - spindle diameter: 30mm - pneumatic top pressure - disc guard Lrjdpozrnt Hsfx Akqju - pneumatic disc extension - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - diameter of dust extraction nozzles: 120mm - table dimensions (length/width): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table + guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall dimensions of the machine (without table) (length/width/height): 1200x640x1280mm - weight: approx. 500kg ADVANTAGES – Polish-made – original technical documentation – 2 roller tables – pneumatic disc stroke – used saw, in perfect condition Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in exchange rates)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4360x900x1450 mm Lrjdpfx Akjyk H Uhjqeu Weight 560 kg Total power requirement 10 kw

Condition: used, Year of construction: 2017, Optimized miter saw Lrjdpfx Ake Ad Igheqeu Manufacturer: Salvador Type: SuperCut 500 Year of manufacture: 2017 Technical data - Saw blade diameter: 500 mm / 450 mm - Maximum feed rate: 200 m/min - Working height: 900 mm - Compressed air consumption: 400 Nl/min - Compressed air supply: 6 bar - Minimum connection power: 14 kW - Extraction speed: 45 m/s Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Catalog number 7940 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - blade guard - hydraulic blade feed - cutting height: 140mm - main motor: 4.4kW - table dimensions (length/width): 570x870mm - table height from base: 750mm - roller tables: 2 pcs - infeed roller table: 1170mm - outfeed roller table: 1210mm - sliding roller width: 600mm Lredpoztzc Djfx Akqsu - overall machine dimensions (without roller tables) (length/width/height): 1040x820x900mm - weight: approximately 570kg ADVANTAGES – German-made – 2 roller tables – pneumatic blade stroke – used saw, in perfect condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical Lodpfjw Hl Aqox Akqeru 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, In operation from 09/2024 to 03/2025. Infeed package lengths: 2.00m to 4.50m. Shortest length of finished packages: approx. 0.60m. Length accuracy: +/- 1mm. Capacity: approx. 350 m3 per shift. Lrodpfx As Adryrskqeu Consisting of: Infeed roller conveyor, 4.5m long, 1.3m wide Mosca KOV-111-16 strapping machine with timber insert Buffer chain conveyor, 4.2m Variocut package capping system with 15kW saw motor Cart system, 4m long, with chain conveyors at the infeed and outfeed Extension of outfeed chain conveyor: 3.2m Control system

Condition: good (used), Year of construction: 2009, programmable optimization system with slide valve. Lsdpfx Aoz Ic Rvekqsru

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm Ljdpfx Akjfv Hphoqjru ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: excellent (used), IM Very good condition. Lrodjxcllujpfx Akqsu

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 537, workpiece width (max.): 1,440 mm, workpiece height (max.): 1,500 mm, Equipment: CE marking, TECHNICAL DETAILS Lrodezxchxjpfx Akqju Max. workpiece width: 1,440 mm Max. workpiece height: 1,500 mm MACHINE DETAILS Voltage: 400 V Current consumption: 15.5 A Fuse rating: 16 A Main motor power: 8.0 kW Power: 8.0 kW Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,500 x 1,850 mm Machine weight: 300 kg Shipping packages: 1 unit EQUIPMENT CE marking

Year of construction: 2025, condition: new, functionality: fully functional, 1 new Holtec portable band sawmill, model KAPPSTAR HF122 A robust all-rounder for cutting lumber and logs Suitable for crosscuts, end cuts, and mitre cuts Package dimensions up to 1.30 m x 1.30 m Log diameter up to 1.60 m Electric motor, 11 kW STIHL chisel chain for cutting lumber or STIHL raker chain for cutting logs Double-sided, adjustable guide rail (four-way reversible) Bar length: 1.90 m 400 V, 50 Hz 1 year warranty Lsdeh Imu Dspfx Akqeru

Condition: used, Year of manufacture: 2006 Colour: White Weight: 2.570 kg - Details: - └ Description: Includes chalk system, Liège scrap pieces; installation dimensions: 15,200 x 2,800 x 1,800 Ljdpfxjz Spr Ae Akqjru - Year: 2006 - CE marking present: Yes - Serial number: 552 - Max. saw length [mm]: 7000 - Min. saw blade diameter[mm]: 500 - Max. saw blade diameter [mm]: 550 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 7000 - Output table length [mm]: 6300 - Options: Automatic pusher system - Transport weight [kg]: 2570kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 201, saw blade diameter: 800 mm, cutting height (max.): 300 mm, cutting width (max.): 550 mm, total length: 2,000 mm, overall weight: 1,000 kg, total width: 2,300 mm, total height: 2,000 mm, working height: 940 mm, input voltage: 400 V, saw drive: 11,000 W, saw blade bore: 40 mm, operating pressure: 8 bar, Ideal cross-cut saw for the timber trade or sawmills. Solid and robust machine, well suited for beams and laminated beams, for packaged goods but also individual pieces. Can be integrated into a cantilever rack due to its compact frame construction. Saw blade emerges from below, stably guided. Safe two-handed operation with large protective hood. Entire machine virtually maintenance-free. Pneumatic clamping cylinders right and left. Completely workshop-tested and ready for use. Saw blade included. Ledpfxjudwzcj Akqeru

Condition: used, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Year of manufacture: 2012 Colour: Grey Weight: 1.500 kg - Year: 2012 - Documentation available: No - CE marking present: Yes Lsdpfoyna Ezjx Akqoru - CE certificate present: No - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 - Input table length [mm]: 7850 - Output table length [mm]: 2400 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 Lrjdpefhbuysfx Akqsu 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018