Package crosscut saw, panel saw

TA Technology OBS1300-A

Condition: like new (used), Year of construction: 2016, power: 200 kW (271.92 HP), overall weight: 7,500 kg, MEBOR multi-blade line with two drums, model VC700, manufactured in 2016. In very good working condition! Almost new. The multi-blade line includes: Blodey Sganspfx Aknsn 1. Automatic feed conveyor with automatic positioning rollers. 2. Loading ramp. 3. Unloading table with left/right sorting.

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher Bljdeya Dc Iepfx Aknjn - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: used, Year of construction: 2013, turning diameter 660 mm turning length 1500 mm control FAGOR centre height 330 mm spindle passage 82 mm number of spindle speeds 30-2000 U/min bed width 390 mm rapid speed X/Z 4 - 8 m/min tailstock quill diameter 75 mm Main spindle capacity 15 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 3800 x 1800 x 2150 m First commissioned in 2015, very good condition - FANUC Series 18i TB Control, Manual Guide i Function - Central control panel for machine and CNC control on the pedal arm 45 ° swiveling - 12-fold tool turret - Fanuc drive with 30 kW (50% ED) - Chip conveyor Bledpfx Asub Uu Ijknjn - Bezel - 3 jaw chucks

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated side board processing line with singulation, trimmer for end trimming, 2 stacking machines, additional discharge, and end trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at a joystick: - Boards are conveyed laterally using a 4-strand overhead chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer Nlewsy Uzhfj D A Tmcob Bljdpfoy Uzldjx Aknon - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick assesses: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box, with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats, with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - trimming length 505 mm for the underlying vibration channel - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - automatic lowering of the finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee processed, packaged, and strapped approximately 15,000 boards of side lumber 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping plant has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. A video of the process can be shown via WhatsApp!

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Bsdpfx Asth Taaskneln Inspection is very welcome.

Condition: used, Forma chop saw IDC000125 - manufacturer: Forma - infeed table - outfeed table Bledpfx Akevzw Agonon - width: 350 mm - height 150 mm - complete with saw dust suction system

Condition: used, Year of construction: 2016, machine/vehicle number: IDC000246, saw blade diameter: 700 mm, cutting height (max.): 225 mm, power: 13.5 kW (18.35 HP), Wood Optimizing Cross-Cut Saw Manufacturer: WEINIG / WEINIG DIMTER OptiCut S60 Year of Manufacture: 2016 (fully serviced in 2026) Professional optimizing cross-cut saw for precise and efficient wood processing. Applications: Pallet manufacturing Wooden packaging production Furniture manufacturing Sawmills and carpentry workshops Technical Specifications: Max. cutting height: 225 mm Saw blade diameter: 700 mm Saw motor: 13.5 kW Positioning drive: 5.1 kW Bodpfx Akszkim Ssnjln Material length: 400–6300 mm Material width: 40–300 mm Material thickness: 15–225 mm Finished length: 80–4800 mm Features: Automatic measuring and positioning Automatic feeding with 9-row cross conveyor Laser length detection Pneumatic workpiece clamping Touchscreen control Positioning accuracy up to ±1 mm Workpiece weight up to 250 kg High productivity and reliable WEINIG quality

Condition: used, Year of construction: 2021, functionality: fully functional, power: 90 kW (122.37 HP), cutting height (max.): 165 mm, cutting width (max.): 1,350 mm, BOARD EDGER AND MULTI RIP SAW VR 1300 S with servo controlled blade positioning • Production year: 2021 • Main motor: 90 kW • Max. board width: 1350 mm • Max. cutting height: 165 mm • Servo-controlled fast blade positioning • 4 movable saw units with lasers • 3 fixed laser guides • 10" touchscreen control with MEBOR software • Additional 500 mm multi rip saw head with spacers Machine is sold with infeed conveyor. Outfeed conveyor is not included. Blodpfxoz D S Ddj Aknon

Condition: used, Year of construction: 2010, Technical details: weight of the machine approx.: 1400 kg dimension machine xH: G= 6,6 x 0,9 x 3,8 m total power requirement: 0,75 kW Bedpfsu Nun Hex Aknjln Made of sturdy sheet steel construction. This is a scraper belt conveyor. Drop-in width: F1= 480mm; Drop-in length: 750mm Ejection: height H = 3200mm Infeed (underfeed to the machine): height = 300mm + superstructure B= 370mm = 670mm and width F= 580mm and length A= 2230mm The chip conveyor is to be positioned stantionary. *

Condition: excellent (used), Double-sided machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting - Electronic Programmer "CNI" NC 400 - Built-in command and electric cabinet - Max. distance between the horizontal heads mm 3200 approx - Movable and adjustable right side of the machine (according to the width of the panels) - No. 2 motorized conveyoring belts (HP 0.25 x 2 motors) - No. 1+1 dowels storage tanks for the automatic feeding to the nozzles - No. 6+6 horizonal inseritng nozzles (Glue injectors and dowel drivers) - High-pressure Glue-feeding system Blodpfx Akew Ug A Hsnen - Total installed power KW 5 ca.