Joinery machine

Schmidler S4

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 20518, We offer this used Schmidler S4 carpentry machine, year of manufacture 2000. Manufacturer: Schmidler Model: S4 Year of manufacture: 2000 Machine type: carpentry machine - 4-strand cross conveyor (inclined, ascending) - Infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cut-off saw - Saw blade diameter: 710mm - Swivel angle: 360 degrees - Tilt: 0-65 degrees - Scrap wood pusher - Marking pin horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Powered outfeed roller conveyor - Pneumatic push ruler - Transport & measuring system - Conveyor belts need to be replaced - Controls: sema btl Maximum workpiece dimensions: Height: 300mm Width: 400mm Total length: approx. 21m Infeed roller conveyor Pgsdpfey Ewxzsx Abzen Outfeed roller conveyor with push ruler and deposit rods Machine used, operational. Conveyor belts need replacement. Machine can be viewed by appointment. Available immediately. If you have any questions or would like more information, feel free to send us a message or call us.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Pgedpfofi Tg Hex Abzjn Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: new, measuring length bis 5700 mm Tube length 6000 mm Pedpfx Abjfv Atljzogn numbers of toolholders 7 Rohr Edelstahl dimensions 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor!

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min Pedpfx Asidmptobzjgn feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: ready for operation (used), Year of construction: 2017, Number of boring spindles 4 St. Working width 230 mm Working height 160 mm Feed motor 11 kW Feed speed 60 m/min. Control Memory Plus Pgedpfx Aoyhfhnjbzon

Condition: ready for operation (used), Four-sided planer / construction timber planer Maximum width: approx. 55 cm Maximum height: approx. 14 cm Immediately available Location: Austria, near Grieskirchen Podpfxow Dn Uqe Abzegn

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 11470, functionality: fully functional, workpiece width (max.): 450 mm, Hundegger K2 in very good condition, overhauled, rebuilt, and commissioned by Hundegger. Since then, it has only run for about 20 hours and was professionally dismantled and stored in a heated hall. Podpfjwhpavex Abzsgn

Condition: ready for operation (used), Year of construction: 1990, MARKON Log house drilling machine with undercutter year 1990 manufacture Markon Lathi / Finland Length = 3550mm Width= 1500mm Height= 2910mm Engine power Drilling unit: 6 x 3 kW moulder: 1 x 5.5 kW Dimensions of the log to be pushed Height max 250mm Height min 130mm Width max 250mm Width min 60mm Length min 600mm Tool sizes and speeds Drill max diameter 40 mm Moulder max diameter 250 mm Drill length 325 mm Drill mounting arm diameter 20h7 mm Drill rotation speed 2880 rpm Moulder: rotation speed 2880 rpm AIR Suction openings dia. 160 mm 2 suction openings Drill unit suction opening diameter 90 mm Suction openings 6 pcs Air speed at the suction opening 30 m / s Air consumption 8460 m3 / h Pgodpfxjfw Rt Ro Abzen electrical connection Total power 380 V 24 kW Compressed air connection Minimum pressure 6 bar Drilling unit air demand / stroke "48 1 Total air demand ~ 2200 1 / min incl. 3,5 meter roller conveyor + 12 drillings

Condition: used, Year of construction: 1980, machine/vehicle number: GUS 71 Typ 26.813, Full frame saw from Wusterer & Dietz including: Frame saw Saw tensioner Riving knife Podpfx Ajv Ummbsbzsgn Frame roller conveyor 4-strand puller Viewing by appointment.

Year of construction: 2013, condition: used, Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Pjdpfor Am Sqex Abzjgn Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 motorized translating roller conveyor * 1 motorized roller conveyor for panel stack unloading Technical features: * Type: KR210-2 * Number of axles: 6 * Admissible nominal load: 210 Kg * Machine weight: 1267 kg * Sound level: 75dB * Installed power: 25.8 KW * Panel dimensions - Min\max length: 300\3000 mm * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: 90 kg