Used Ctx for sale (124)

Condition: used, Year of construction: 2002, turning diameter 400 mm turning length 635 mm control Heidenhain Eltropilot greates pass round over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm drive of main spindle 21 kW max. torque on the spindle 240 Nm main spindle speeds: 25-5.000 turning speed range - C-axis 100 U/min feed power in the axis x + z 3,5 / 7 N Dcsdpfx Aey I A U Hockoh rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min total power requirement 44 kva weight of the machine ca. 6 t

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 313154, spindle bore: 79 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,500 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: GRUNDIG, controller model: ELTROPILOT, input voltage: 400 V, input frequency: 50 Hz, input current: 64 A, nominal power (apparent): 44 kVA, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, Equipment: documentation/manual, GILDEMEISTER CTX 400 E CNC Lathe - Swing diameter over bedway cover: 570 mm - Swing diameter over cross-slide cover: 420 mm - Cross travel (X-axis): 220 mm - Longitudinal travel (Z-axis): 635 mm - Main spindle headstock diameter: 170 mm - Spindle diameter in front bearing: 120 mm Dsdsy I Tcuepfx Ackech - Chuck diameter: 200/250 mm - C-axis speed: 100 rpm - Holding torque: 200 Nm - Indexing accuracy: 0.04° - Including 12-station tool turret, with 6 driven positions - Tailstock diameter (front): 80 mm - Tailstock travel: 515 mm - Tailstock taper: MT 4 The machine is equipped with a tailstock, tool holders in the tool turret, and a three-jaw chuck, diameter: 200 mm. Attention: The item must be collected bindingly between 24.08. and 27.08.2026 by prior arrangement. FCA D-61352 Bad Homburg – loaded onto truck

Condition: good (used), Year of construction: 2013, Main and counter spindle C-axis on main and counter spindle 2 x 12-position turret VDI 40 Y-axis Chuck flushing device Tool monitoring Brankamp Coolant system 980 liters with belt filter Djdpfxoy Ivyie Ackoch Conveyor belt Oil mist separator Chip conveyor without bar feeder

Operating hours: 68,816 h, condition: ready for operation (used), functionality: fully functional, overall weight: 5,500 kg, total length: 4,500 mm, total width: 1,950 mm, total height: 1,750 mm, torque: 263 Nm, turning diameter: 290 mm, bar diameter (max.): 72 mm, bar passage: 72 mm, chuck outer diameter: 200 mm, feed length X-axis: 212 mm, feed length Z-axis: 640 mm, quill diameter: 80 mm, quill stroke: 100 mm, rapid traverse Z-axis: 15 m/min, rapid traverse X-axis: 10 m/min, rotational speed (max.): 5,000 rpm, rotational speed (min.): 25 rpm, swing diameter over bed slide: 500 mm, swing diameter over cross slide: 290 mm, turning length: 640 mm, type of input current: three-phase, machine/vehicle number: 310142, Equipment: documentation/manual, Basic Data Manufacturer: Gildemeister Dedpjy Tx Awjfx Ackech Type: CTX 400 Machine No.: 310142 Year of Manufacture: Not specified, presumably early 1990s Control System: Gildemeister EPL / Grundig Operating Hours: 68,816 h Weight: 5,140 kg Dimensions L x W x H: 4,527 x 1,940 x 1,730 mm Connection: 400 V / 50 Hz Power: 45 kVA Turning Data Minimum Spindle Speed: 25 rpm Maximum Spindle Speed: 5,000 rpm Maximum Torque: 210 / 263 Nm Turning Diameter: 290 mm Turning Diameter over the Way Rest: 500 mm Turning Diameter over the Facing Slide / Facing Guide Cover: 290 mm Turning Length: 640 mm Bar Diameter / Spindle Bore: 72 mm Chuck Outer Diameter: 200 mm Axes / Travels Feed Travel X-axis / Facing Travel: 212 mm Feed Travel Z-axis / Longitudinal Travel: 640 mm Rapid Traverse X-axis: 10 m/min Rapid Traverse Z-axis: 15 m/min Y-axis: Not available / leave blank Tailstock Quill Diameter: 80 mm Quill Stroke: 100 mm Quill Taper: MK 4 Maximum Quill Pressure: 800 daN Tool Holder Tool Stations: 12 Tool Holder: VDI 30 Powered Tools: Not available / do not enter C-axis: Not available / do not enter

Condition: ready for operation (used), Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, chuck outer diameter: 325 mm, controller model: Fanuk Series 21I-TB, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter over cross slide: 350 mm Max. turning diameter: 465 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. spindle speed: 3,500 rpm Max. torque: 630 Nm Spindle bearing diameter: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Quill stroke: 150 mm Rapid traverse X/Z axis: 30 m/min Number of tool turret positions: 12 Tool holder: VDI 40 MACHINE DETAILS Control: Fanuk Series 21I-TB Dedpfx Acoy Hg S Hokoch Drive power: 33 kW

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,752 h, functionality: fully functional, Equipment: documentation/manual, We are offering this ready-to-use GILDEMEISTER CTX 200 series 2 CNC turning and milling center, year of manufacture 2001. Manufacturer: GILDEMEISTER Type/Model: CTX 200 series 2 Dedpfxsyu Uytj Acksch Contrary to the photo, the machine is sold with a three-jaw chuck and not a collet chuck; various VDI20 toolholders are included as well. The short bar feeder has not been in operation for a long time, so its condition is unknown. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Original accessory case for DMG CTX machines, from Horn. Dcodey Ucbyspfx Ackoh

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Dedpfx Acsv Ehawekech Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: new, Accessory case for DMG CTX beta/gamma TC. Dodpfxsy Ub Sdo Ackech

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 02280000301, turning diameter over cross slide: 565 mm, turning length: 1,300 mm, turning diameter: 440 mm, spindle bore: 90 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 315 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 45,000 W, rapid traverse X-axis: 60 m/min, rapid traverse Z-axis: 45 m/min, rotational speed (min.): 20 rpm, rotational speed (max.): 4,000 rpm, total height: 2,230 mm, total length: 5,742 mm, total width: 2,730 mm, feed length X-axis: 315 mm, feed length Z-axis: 1,350 mm, quill travel distance: 150 mm, quill stroke: 150 mm, swing diameter over cross slide: 565 mm, turning diameter over bed slide: 840 mm, overall weight: 10,700 kg, swing diameter over bed slide: 680 mm, swing diameter over top slide: 680 mm, Equipment: documentation/manual, rotational speed infinitely variable, NO DEALER INQUIRIES – Dealer inquiries will not be answered. For sale is a DMG GILDEMEISTER CTX 520 linear – a robust, proven CNC lathe currently in production. Dedpfx Acjypkv Hjkoch Inspection and demonstration under power are possible at any time by appointment. The machine is sold as seen. Additional photos and videos of the machine can be sent to you by email upon request.

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center from the manufacturer DMG, type CTX beta 800, built in 2009. Available immediately. The machine is in good condition and fully functional. Technically sound and ready for immediate use. Technical data: Machine type: CNC turning center Manufacturer: DMG Type: CTX beta 800 Year of manufacture: 2009 Control: Heidenhain 4290 Dcedpfx Aceyq Hq Nekoh Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer support technically sound and fully functional Inspection under power possible by arrangement Service and maintenance reports available large accessory package powered tools from WTO further documentation and images available upon request If interested, please write or call. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 850 mm, turning diameter: 410 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 850 mm, spindle motor power: 28 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, quill travel distance: 800 mm, CNC Siemens 840D WORKING AREA: Maximum rotating diameter: mm 700 Maximum machining diameter: mm 410 X-axis travel: mm 300 Z-axis travel: mm 850 SPINDLE: Spindle nose: mm 170 h5 Bar capacity: mm 76 Chuck diameter: mm 315 P ower (40 / 100% ED): kW 28 / 20 Maximum torque (40 / 100% ED): Nm 315 / 225 Maximum spindle speed: rpm 5.000 Peak torque speed: rpm 900 FEED RATES: Rapid traverse X-axis: m/min 30 Rapid traverse Z-axis: m/min 30 Indexing accuracy: 0.025° TOOL TURRET: Number of driven tool stations: 12 VDI 40 DIN 69880 tool shank diameter: mm 40 Dcjdpfx Aoy S Db Nsckoh Power (40% ED): kW 12 Maximum torque (40% ED): Nm 36 Maximum speed: rpm 4.000 TAILSTOCK: Tailstock travel with automatic movement: mm 800 Tailstock taper: MT 5 Maximum tailstock force: daN 800 Machine weight: kg 6.100 Machine equipped with: • Tool presetting system • Set of static tool holders - No. 1 axial driven tool holder • No. 1 radial driven tool holder • Autoblok self-centering chuck Ø 315 mm • High-pressure pump • Operation and maintenance manuals and CE declaration

Condition: good (used), General Information: Model: Gildemeister CTX 400 Series 2 Dcodpjy Ixxbefx Ackjh Year: approx. 2000 Control: Heidenhain CNC Pilot Configuration: C-axis with driven tools Technical Specifications: Max. turning diameter: ~400 mm Max. turning length: ~600 mm Swing over bed: ~570 mm X-axis travel: ~220 mm Z-axis travel: ~635 mm Spindle: Spindle speed: up to 5000 rpm Spindle power: approx. 21–28 kW Bar capacity: ~79 mm Turret & Tooling: 12-position turret VDI 30 tool holders C-axis for milling/drilling operations Rapid Traverse: X-axis: ~20 m/min Z-axis: ~24 m/min Condition & Maintenance: The machine has recently undergone a complete hydraulic overhaul Brand-new hydraulic pump installed Full service completed in February 2026 Current status: The machine is showing an X-axis alarm Therefore, it is offered for sale as-is in current condition Additional Information: Machine can be inspected on site Known as a solid and reliable turning center suitable for medium-sized parts Ideal for turning operations with additional milling capability (C-axis )

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister lathe Color: Pink Rose Dcjdpfxoy A Imqo Ackjh 3 axes X, Z, C Type: CTX 400 Series 2 CNC Heidenhain With conveyor With driven tooling With documentation

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister Lathe Color: White 3 axes X, Z, C Model: CTX 400 Series 2 CNC Heidenhain With chip conveyor Dodpfxsy A Ilyo Ackoch With driven tooling With documentation

Condition: ready for operation (used), Year of construction: 2005, operating hours: 19,229 h, functionality: fully functional, machine/vehicle number: 8043943123C, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Turning diameter: 465 mm Turning length: 1,050 mm Swing diameter: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Spindle speed range: 3,500 rpm Rapid traverse X/Z: 30 m/min MACHINE DETAILS Control: Siemens 840 D Number of tool positions: 12 positions Dedoy D I Ttopfx Ackjch Tool holder: VDI 40 Weight: 7,500 kg Operating hours Spindle hours: 19,229 h Power-on hours: 81,347 h Note: The machine can be inspected under power upon request.

Condition: good (used), Year of construction: 2004, Gildemeister CTX 510 Control: Siemens 840 D with Shop - Turn Year of manufacture: 2004 Travel X / Z: 300 / 1050 mm Turret: 12 stations Tool holder: VDI 40 Spindle speed up to: 3,500 rpm Bar capacity: 90 mm Quill travel: 150 mm Tailstock Coolant pressure: 20 bar Chuck size: 315 mm Spindle hours approx.: 14,000 Dcjdpsy N S E Rsfx Ackjh * Batch sizes of 0 - 5 have been produced on the machine * Programming was carried out directly at the machine

Condition: used, Year of construction: 2004, operating hours: 9,203 h, functionality: fully functional, machine/vehicle number: 8040939522C, total height: 2,276 mm, total length: 6,205 mm, total width: 2,214 mm, overall weight: 12,000 kg, For sale is a high-quality CNC turning machine, type Gildemeister CTX 620 Linear, manufactured in 2004. The machine underwent a comprehensive overhaul and technical refurbishment in 2025, with various components being replaced. This overhaul, performed by DMG Used Machine, cost €60,000 alone. Here is a brief overview of the work carried out during the overhaul: Djdjy I U Ulepfx Ackoch - Retrofitting of a steady rest (SMW) (clamping range 90-350mm) - Replacement of the energy chain (Z-axis) - Replacement of all components in the energy chains X and Z (cables, hoses, fittings, etc.) - Repair of the tailstock The machine has a 12-position tool turret VDI 50 (Duplomatic), 6 tool holders for driven tools, and a 400 mm chuck (KH400). Control system: Heidenhain. The machine is still occasionally used for production. Inspection is possible at any time, and the machine is connected to power. OTHER MACHINES ARE ALSO AVAILABLE FOR SALE; please inquire.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,395 h, travel distance X-axis: 380 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 2, This 3-axis Gildemeister CTX 620 linear was manufactured in 2007. A horizontal turning machine, it includes tool holders and a tail stock. Consider the opportunity to buy this Gildemeister CTX 620 linear horizontal turning machine. Contact us for more information. Siemens 840D with shopturnSpindle with integrated motorTailstockChip conveyorSpray gunAutomatic doorHollow clamping cylinder SMW 121 mmSMW Autoblok 400 BHD-FL ø 118 hollow Additional equipment • Tool holders (as shown in pictures) will follow • Tailstock will follow Dcodpsx Stlqofx Ackoh Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter in front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis: 10/10 m/min Turret: Number of tool stations: 12 Of which driven tool stations: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-position turret, VDI 50, including 6 driven tool stations in turret, manufacturer SAUTER, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Extraction unit, manufacturer LTA • Various tool holders VDI 50 • CE-compliant In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 line-commutated return module, 1 control insert for 1 axis, 1 controller module for 2 axes inverter servo drive, 1 Simodrive power module for 1 axis motor. Total repair cost: EUR 17,000.00 net Important note: On this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995), the positioning of the C-axis does not function and the driven milling unit rotates but does not engage. Otherwise, the machine is in perfect condition. A demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Dsdpfxsx Sx Hte Acksch

Condition: good (used), Year of construction: 2017, functionality: fully functional, Description: The machine is in good technical condition, and a test run is possible by prior arrangement. Equipped with Siemens Shopturn system, including a bar feeder, and supplied in full configuration. Dcedpfoy Rgafjx Acksh BASIC PARAMETERS Max. turning diameter in working area: approx. 410–500 mm Max. length: 800 mm Distance between spindles: approx. 1020 mm Swing over bed: approx. 700 mm Practical application: ideal for shafts, flanges, and housings up to approx. 800 mm Travels (axes) X: approx. 480 mm Y: approx. 100 mm Z: approx. 800–845 mm B axis: approx. 110° (5-axis machining) C axis: 360° (indexing + interpolation) These features make it a true turn-mill center (not a conventional lathe) Spindles Main spindle speed: approx. 5000 rpm Power: approx. 25–34 kW Through bore: approx. 76–87 mm Sub-spindle speed: approx. 6000 rpm Milling spindle (main difference compared to a standard lathe) Speed: up to 12,000 – 20,000 rpm Power: approx. 19–22 kW Taper: HSK-A63 or Capto C6 Capabilities: milling, drilling, tapping, 5-axis simultaneous operations Tool System Magazine: 24–48 tools Live tools: yes (fully integrated) Control system: Siemens 840D sl + CELOS (most common) Weight and dimensions Weight: approx. 10,000 kg Dimensions: approx. 6.5 × 2.7 × 2.0 m

Condition: excellent (used), Hello, I have for sale a DMG GILDEMEISTER CTX 310 V3 CNC LATHE with driven tools. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control system: Heidenhain Data Pilot 4290 Country of origin: Germany Year of manufacture: 2003 - Total machine operating hours: 9,144 h Machine specifications: - Turret: 12 tool positions for VDI-30 holders + TurnPlus attachment - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Hydraulic tailstock - Through-spindle - Max turning diameter (X-axis): 190 mm - Max turning length (Z-axis): 455 mm - Cooling system - SMW AutoBlock three-jaw hydraulic chuck - Spindle bore diameter: 50 mm - Chip conveyor - Full programming manual - Mechanical and electrical documentation - Machine weight: 3.8 t - Loading included in the price Dodpfx Ajy Rb H Hockjch The machine has undergone a full service inspection. 100% operational. Connected and ready for work. Stal-Com has been engaged in sales, service, and training on DMG group CNC machines for 19 years. We specialize in all models of Gildemeister lathes as well as Deckel Maho machining centers. Every machine undergoes a meticulous technical check. Apart from Polish customers, our machines are also purchased by clients across Europe and parts of Asia. Each machine can be inspected in operation, as we also provide machining services. After purchasing a machine from us, we conduct operator training and can also set up production of parts at the customer's facility. We cooperate on a long-term basis with many companies, supplying them with further machine tools.

Condition: excellent (used), For sale: GILDEMEISTER CTX 410 V3 CNC LATHE with driven tools TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2006 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 positions for VDI-30 tool holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Driven tools Dodpjy Rb Ecsfx Ackjch - Tailstock - Max turning diameter (X-axis): 320 mm - Max turning length (Z-axis): 600 mm - Coolant system - Hydraulic collet chuck on the main spindle (can be replaced with 3-jaw chuck) - Main spindle with through-hole (bore diameter: 66 mm) - Finished parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a complete inspection. Fully operational and ready to work—currently connected and available for demonstration. About the company: Stal-Com has been trading, servicing, and providing training on DMG Group CNC machines for over 20 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. Every machine undergoes a thorough technical inspection. We supply not only customers in Poland, but also across Europe and parts of Asia. Each machine can be inspected live in production, as we also provide subcontract machining services. After purchase, we provide operator training and can help set up production at the customer’s facility. We work with many clients under long-term partnerships, supplying additional machines as needed.

Condition: excellent (used), Year of construction: 2007, For sale: CNC LATHE GILDEMEISTER CTX 410 V6 with driven tools, Y-axis, sub-spindle TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V6 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2007 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 stations for VDI-30 tool holders (all stations driven) - Max spindle speed: 5000 rpm - C-axis on both spindles - Driven tools - Y-axis - Sub-spindle - Max turning diameter X-axis = 320mm - Max turning length Z-axis = 600mm - High-pressure coolant system - Hydraulic 3-jaw chuck 250mm on the main spindle - Hydraulic 3-jaw chuck 200mm on the sub-spindle - Main spindle through-hole (bore diameter 77mm) Dcodpfx Acey Rbz Dskjh - Parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 6 tons - Loading included in the price The machine has undergone a complete inspection. 100% operational. Connected and ready for operation. Stal-Com company has been dealing with the sale, service, and training on DMG group CNC machines for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers from Poland, but also from all over Europe and parts of Asia. Every machine can be inspected in operation, as we also provide CNC machining services. After purchasing a machine from us, we offer operator training as well as on-site production setup. We have long-term cooperation with many companies to whom we supply additional machine tools.

Condition: excellent (used), Year of construction: 1995, Equipment: documentation/manual, FOR SALE: CNC LATHE GILDEMEISTER CTX400 TECHNICAL AND VISUAL CONDITION: Very good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX400 Control: Heidenhain 1190 Country of origin: Germany Djdpfey Rbr Nsx Ackech Year of manufacture: 1995 Machine specifications: - Turret: 12 tool stations, VDI-30 tool holders - Max. spindle speed: 5000 rpm - Hydraulic tailstock - Parts catcher - Max. turning diameter X-axis: 290 mm - Max. turning length Z-axis: 600 mm - Coolant system - Three-jaw hydraulic chuck 200 mm - Spindle bore: 66 mm - Through-spindle - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5.5 tons - Loading onto truck included in the price The machine has undergone a full technical inspection. 100% operational. Connected and ready for work. Stal-Com has been selling, servicing, and providing training on CNC machines from the DMG group for 17 years. We specialize in all models of Gildemeister lathes as well as Deckel Maho machining centers. All machines undergo a thorough technical inspection. Besides Polish customers, our machines are purchased by clients throughout Europe and parts of Asia. Each machine can be inspected under power during production, as we also provide machining services. After purchasing a machine from us, we offer operator training and can help set up part production at the customer's site. We work with numerous companies on a long-term basis, supplying them with further machine tools.