Used Gildemeister Ctx 410 for sale (252)

Condition: used, Year of construction: 2006, operating hours: 37,695 h, functionality: fully functional, Equipment: documentation/manual, CNC lathe – Gildemeister CTX 410 with C-axis (used) Machine data Model: Gildemeister CTX 410 Year of manufacture: 2006 Control system: Siemens 840D (ShopTurn) Spindle hours: approx. 37,695 h Max. spindle speed: 5,000 rpm Max. turning length: 635 mm Spindle bore: 65 mm Tool turret: 12-station Tool holder: VDI30 Condition: used, functional Accessories Chip conveyor with coolant pump Bar loader included, but never connected IFM oil mist extraction system Röhm 3-jaw chuck Maintenance / Service The machine was recently realigned by a DMG technician (turret and spindle). The following components were replaced: Door switch Foot pedal for chuck Various relays New NPU New PLC Location 24222 Schwentinetal Transport / Collection Collection only Transport and loading are to be arranged by the buyer Terms of sale Sale exclusively to businesses / entrepreneurs Dodpfx Akoz Nxcxo Aocp No sale to consumers Sale is made with exclusion of any warranty for defects No guarantee or warranty of suitability Inspection and functional testing possible by appointment Price net. VAT can be shown separately.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10715 Manufacturer: DMG GILDEMEISTER Type: CTX 410 Year of construction: 2003 Type of control: CNC Control: Heidenhain CNCPilot 4290 Storage location: Halberstadt Dsdpfe Ahplasx Ak Aocp Country of origin: Germany Serial no.: 013xxxxx spindle running time: 23.100 H Operating hours: 68700 H Further information: Including chip conveyor, transport securing equipment, documentation and accessories. The machine has been cleaned and can be inspected under power.

Condition: used, Year of construction: 2005, operating hours: 55,500 h, functionality: fully functional, machine/vehicle number: 01360004031, CNC lathe Gildemeister CTX 410, year of manufacture 2005 – spindle 2026 replaced, with bar loader magazine Condition: good, well-maintained, technically overhauled Year of manufacture: 2005 Location: West Saxony Price: upon request Technical data: Manufacturer: Gildemeister Drehmaschinen GmbH, Bielefeld (Made in Germany) Type: CTX 410 Machine no.: 01360004031 Control: Heidenhain CNC PILOT 4290, NC software TurnPlus Max. spindle speed: 5,000 rpm Tool turret: 12-station, with driven tools Connection power control: 4.4 kVA, 230 V / 150 W Operating hours & maintenance: Total operating hours: approx. 55,500 h Spindle 2026 completely replaced – only approx. 116 spindle hours (practically new) Guideway of X-axis replaced in 2025 Tool turret replaced in 2025 Equipment: Bar loader magazine LNS Quickload Servo II Dedpozwwagjfx Ak Aocp Integrated chip conveyor Tailstock Handheld control unit (handwheel remote control) Work area lighting Description: For sale is a CNC lathe Gildemeister CTX 410, year of manufacture 2005, with Heidenhain CNC PILOT 4290 control (NC software TurnPlus) and a 12-station tool turret with driven tools. The machine has a total of approx. 55,500 operating hours, but has undergone a major technical overhaul: the main spindle was completely replaced in 2026 and has only approx. 116 operating hours, and the guideway of the X-axis and the tool turret were replaced in 2025. The machine is also equipped with an LNS Quickload Servo II bar loader magazine for automated production. Overall condition is good and well-maintained. Inspection and test run at the location in West Saxony possible by arrangement. Price: upon request Other machines available from site clearance Takeover of the location negotiable

Condition: excellent (used), For sale: GILDEMEISTER CTX 410 V3 CNC LATHE with driven tools TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2006 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 positions for VDI-30 tool holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Tailstock - Max turning diameter (X-axis): 320 mm - Max turning length (Z-axis): 600 mm - Coolant system - Hydraulic collet chuck on the main spindle (can be replaced with 3-jaw chuck) Dcjdpjzu Dfqsfx Ak Ajp - Main spindle with through-hole (bore diameter: 66 mm) - Finished parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a complete inspection. Fully operational and ready to work—currently connected and available for demonstration. About the company: Stal-Com has been trading, servicing, and providing training on DMG Group CNC machines for over 20 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. Every machine undergoes a thorough technical inspection. We supply not only customers in Poland, but also across Europe and parts of Asia. Each machine can be inspected live in production, as we also provide subcontract machining services. After purchase, we provide operator training and can help set up production at the customer’s facility. We work with many clients under long-term partnerships, supplying additional machines as needed.

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Dcsdjv Epzvopfx Ak Ajp Accessories: Chip conveyor Tool holders, chuck jaws

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 01360000541, turning length: 600 mm, turning diameter: 320 mm, spindle bore: 87 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,300 mm, total length: 4,000 mm, total width: 2,000 mm, quill diameter: 120 mm, quill stroke: 150 mm, overall weight: 5,000 kg, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT 4290, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 44 kVA, tailstock quill stroke: 580 mm, operating hours of spindle: 22,794 h, GILDEMEISTER CTX 400 C CNC turning machine - Swing diameter: 505 mm - Swing diameter over X-axis: 365 mm - Bar capacity: max. 65/75 mm - Spindle diameter in the front bearing: 130 mm - Chuck diameter: 200/250 mm - Drive power: 21 kW Dodpfx Ako Afutds Ajcp - incl. C-axis - Speed: 200 rpm - Positioning accuracy: 0.04° - Ball screw X/Z: 32 x 10 mm - Feed force X/Z: 4/6 kN - incl. 12-position tool changer - Number of driven tool stations: all 12 - Shank diameter: VDI 30 - Tool disk, axial tool mounting: pitch diameter: 340 mm - incl. tailstock, tailstock travel: 580 mm - Center height: MK 4 - incl. additional driven VDI 30 tool holders – compatible with the machine - with chip conveyor and documentation The machine is equipped with a tailstock, a 3-jaw chuck, diameter: 200 mm, and a 12-position tool turret, VDI 30. FCA D-94227 Zwiesel - loaded onto a truck.

Condition: excellent (used), Year of construction: 2009, operating hours: 29,770 h, functionality: fully functional, CNC turning and milling center with SIEMENS Shop Turn control, LNS Quick Load Servo 3 bar feeder, chip conveyor. Dcodpo Aicchofx Ak Aep Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2011, operating hours: 7,541 h, functionality: fully functional, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 2,067 mm, total length: 5,671 mm, total width: 2,721 mm, overall weight: 8,000 kg, spindle diameter: 250 mm, Equipment: documentation/manual, Main spindle: 25 kW, 5000 rpm, SMW Autoblock chuck diameter: 250 mm, bar diameter: 65 mm. Dcjdoz Dpm Nepfx Ak Aop Counter spindle: ISM52, 20 kW, 6000 rpm, SMW Autoblock chuck diameter: 210 mm. Turning and milling spindle (B-axis): HSK63A, 18000 rpm, external/internal coolant with high-pressure flushing at 20 bar. Direct axis measurement. Tool magazine for 24 tools. Chip conveyor, extraction system with filtration. The delivery includes various HSK63A tool holders. Direct sales to end users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: excellent (used), Year of construction: 2000, GILDEMEISTER DMG-CTX 400 twin CNC lathe with twin spindles and a single turret, year 2000 Includes workbench and its contents, and one tool cabinet with its contents. Dcedpo Ah Hywofx Ak Aep

Condition: like new (used), Year of construction: 2019, operating hours: 44,087 h, functionality: fully functional, machine/vehicle number: 02620000651, overall weight: 6,360 kg, Equipment: documentation/manual, Gildemeister/DMG Mori CTX 2500/700 CNC Turning Machining Center (2019) – used and operational The machine is operational and in good condition, and is available for any testing. Dcedpfx Akjzxxh Us Ajp Year: 2019 Technical details: Serial No.: 02620000651 Driven spindles: Rated speed: 4,000/5,000 rpm Net weight: 6,360 kg Total operating hours: 44,087 h Spindle hours: 27,832 h Cooling unit Chip conveyor Coolant treatment system Control system Manufacturer: DMG Mori Model: Ergoline Tool turret 14 positions For driven tools Condition: very good, operational Ready for immediate delivery The machine runs without any problems. The machine is available at H.B.R. srl – Calolziocorte (LC) – Italy. You can inspect and test the machine with your own staff.

Condition: used, Year of construction: 2004, CNC turning machine Gildemeister Type/Model CTX 520 linear Condition Used Year of manufacture 2004 Operating hours 86,490 Spindle hours 12,970 Dedpfx Akjzn Ih Nj Ascp Technical data Working area max. turning diameter: 680 mm Turning diameter over X-axis: 565 mm Chuck diameter: 250/315 mm Spindle bore: 107 mm Spindle speed C-axis (main spindle): 400 rpm Travel in X-axis: 315 mm Travel in Z-axis: 1350 mm Number of tools: 12 Tailstock stroke: 1200 mm Tailstock force: 14 kN Taper: 5 MK Quill stroke: 120 mm Coolant system Capacity: 250 l Pump capacity: 1.7 kW Flow rate at 6 bar: 20 l/min Connected load: 65 kVA / 100 A Operating voltage: 400 V Dimensions and weight Weight approx. 10,000 kg Dimensions approx. 5760 x 2600 x 2210 mm Equipment: - Chip conveyor without pump - Machine feet Inquiry item: Transport costs in individual offer

Condition: good (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, 1 used CNC lathe Dcsdpfezh Ea Nex Ak Ajp Manufacturer: Gildemeister Model: CTX 200 Control: Heidenhain Elekto Pilot 1190 Year of manufacture: 1997 Operating hours: approx. 38,000 hours Swinging diameter over bed: 440 mm Swinging diameter over slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5000 rpm Turret: 12 stations Tool holder: 20 VDI Machine dimensions L x W x H: 2800 x 1651 x 1771 mm Machine weight: approx. 3000 kg Accessories: Coolant system Tailstock Documentation -- Used machine, no warranty -- -- Subject to prior sale and errors --

Condition: used, Year of construction: 2002, functionality: fully functional, CNC lathe Gildemeister Type: CTX 420 V6 Linear Year of manufacture: 2002 Serial number: 02260000631 Control system: Siemens PowerLine Technical data: Working area: Max. swing diameter over X-axis guide 680 mm Swing diameter over X-axis guide 565 mm Chuck diameter 200/250 mm Travel in Z-axis 260 mm Travel in X-axis 635 mm Spindle head: Spindle head (flat flange) 170 main spindle, 140 counter spindle Spindle diameter in the front bearing 120/90 mm Spindle bore 79/57 mm Main drive: Power of the AC main drive (100% duty cycle) 25 kW Torque max. 270 Speed range 25-5000 rpm Counter spindle Drive power AC 25 kW Torque max. 7000 Nm Speed range 35-7000 rpm Tool carrier Number of tool stations 12 Tool interface according to DIN 69880 Cylindrical shank diameter 40 mm Indexing time 30 ° 0.15 sec. Number of driven tools 5 Drive power 13.2 kW Torque 28 Nm Speed max. 4500 rpm C-axis, main spindle/counter spindle Dedpfxoz I T Avo Ak Aecp Speed range 0-250 rpm Torque 200/120 Nm Speed during point positioning 0.025 degrees Y-axis, vertical travel +/- 40 mm Hydraulics Capacity, total approx. 25 l Pressure max. 80 bar Pressure for clamping device max 70 bar

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 01190000341, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16 to November 26. TECHNICAL DETAILS General Information Machine number: 01190000341 Operating hours: 57,730 h Control system: Heidenhain CNC Pilot Electrical Data Operating voltage: 400 V Frequency: 50 Hz Connected load: 58 kVA Rated current: 100 A Working Area Turning length: 1,000 mm Maximum diameter over the machine bed cover: 680 mm Maximum diameter over the guide cover: 455 mm Cross travel: 320 mm Longitudinal travel: 1,097 mm Main Spindle Spindle diameter: 220 mm Spindle head diameter at the front bearing: 140 mm Spindle bore: 107 mm Chuck diameter: 400 / 500 mm Speed range: 4–2,800 rpm C-axis Speed: max. 100 rpm Dodpfx Aez Uwzwsk Ascp Feed and Rapid Traverse Feed force X-axis: 8 kN Feed force Z-axis: 15 kN Rapid traverse X: 24 m/min Rapid traverse Z: 30 m/min Tool Turret Tool turret: 12-station Clamping Device 3-jaw chuck: Forkardt Chuck diameter: 300 mm EQUIPMENT 12-station tool turret Tool holders in the tool turret 3-jaw chuck by Forkardt Work table Documentation Chip conveyor Extraction system

Condition: good (used), Year of construction: 2012, functionality: fully functional, Center distance (mm) 450 Turning diameter (mm) 500 Turning length (mm) 300 Turning diameter (mm) 200 Bar passage (mm) 52 Spindle speed (rpm) 6000 Spindle power (kW) 15-20 Travel in X-axis (mm) 190 Travel in Z-axis (mm) 335 Rapid traverse rate (m/min) 30 Tool positions 12 Tool holder VDI30 Number of turrets 1 Number of driven tools 12 Weight (kg) 3800 Dimensions (L×W×H) (mm) 4260 x 1710 x 1820 Spindle hours (h) 20000 Dcsdpfoz At Abox Ak Asp Manufacturer DMG Year of manufacture 2012 Control system Siemens 840D sl with ShopTurn

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02260002571, The Gildemeister CTX 420 Linear is a powerful and highly precise CNC universal lathe (or turning-milling center) designed for demanding series and mass production. It is particularly characterized by its linear motor technology in the X-axis, which, compared to conventional ball screw drives, ensures extremely high dynamics, rapid positioning, and wear-free operation. Equipment: -Single spindle, three-jaw chuck, 11-position tool turret, automatic tailstock, chip conveyor Dcodpfx Aoz N Etkok Aop Control: -Heidenhain Accessories: -Work bench, under-mounted telescopic drawer cabinet (7 drawers) Contents: Hand tools, analog/digital measuring instruments, indexable inserts Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailor-made financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the best solution. Upon request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and on-time process so that you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors!

Condition: good (used), Year of construction: 1998, - Heidenhain CNC Pilot control system - Accessories included - Powered tooling - Counter spindle Work area Dsdpfx Akj Afhifs Ascp Max. turning diameter 160 mm Swinging diameter over bed 440 mm Swinging diameter over compound slide 210 mm Turning length 350 mm Main spindle Spindle bore 56 mm Max. spindle speed 5,000 rpm Drive power 7.5 kW Number of spindles: Main spindle C-axis Travel distances X-axis 160 mm Z-axis 350 mm Tailstock travel 350 mm Tailstock Arbor diameter 80 mm Tailstock travel 350 mm Tailstock mounting MK 3 Feeds Rapid traverse X 20 m/min Rapid traverse Z 30 m/min Space requirement approx. 2,800 x 1,800 x 1,800 mm Machine weight approx. 3,400 kg

Condition: good (used), Year of construction: 1993, functionality: fully functional, travel distance X-axis: 212 mm, travel distance Z-axis: 640 mm, total height: 1,730 mm, total length: 4,530 mm, total width: 1,940 mm, overall weight: 5,200 kg, Gildemeister CTX 400, CNC turning machine. The machine is in good, well-maintained condition. Manual included. Machine with EPL2 programming. Travel distances: Z-axis = 640 mm X-axis = 212 mm Max. turning diameter over the bed: 500 mm Data: Dedpfx Aj Ad H Ukjk Aocp - Year of manufacture: 1993 - CNC control: EltroPilot L2 - 12 tool stations - Spindle power: 22 kW - Rapid traverse X-axis: 10 m/min - Rapid traverse Z-axis: 15 m/min - Speed range: 25 - 5000 rpm - Chip conveyor GB 25L 38L (discharge height 1100mm, belt width 225mm, feed height 250mm) - Double foot switch - Machine weight (with chip conveyor): approx. 5.15 tons - Dimensions with chip conveyor (W x D x H): 4.53 x 1.94 x 1.73 m The machine can be inspected at any time. The sale is only to business customers and is without guarantee or warranty. You will receive an invoice with the currently applicable VAT. The machine can be loaded.

Condition: excellent (used), Year of construction: 2006, operating hours: 8,513 h, functionality: fully functional, machine/vehicle number: 8042942323C, We are offering this refurbished Gildemeister CTX 310 V4 CNC SIEMENS 840 D SHOPTURN CNC turning and milling center, year of manufacture 2006. Serviced and prepared for transport Extensive tool accessories included, such as tool cabinets and measuring devices Year of manufacture: 2006 Weight: 3950 kg Maximum spindle speed: 6000 rpm Connected load: 26 kVA Max. connection current: 35 A Current: 38 A Djdoyvfq Sepfx Ak Aecp Mains voltage: 400 V Frequency: 50/60 Hz Control voltage: 230 V Control power consumption: 150 W Internal voltage: 24 V If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2007, CNC turning machine Gildemeister Type/Model: CTX 520 linear Condition: Used Year of manufacture: 2007 Technical data Max. turning length: 1300 mm Max. swing over bed: 680 mm Max. swing over cross slide: 565 mm Spindle head according to DIN, flat flange: size 220h5 Spindle diameter in front bearing: 150 mm Spindle bore: 107 mm Max. chuck diameter: 315 mm Tool system: disc-type revolving tool holder VDI40 Number of turning turrets: 12 Driven tools: 12 Longitudinal travel: 1350 mm Cross travel: 315 mm Tailstock quill/travel: MK 5 / 1200 mm Total connected load: 65 kVA Voltage: 400 V Frequency: 50 Hz Main spindle speed: 4000 rpm Feed rate, longitudinal: 3000 rpm Feed rate, longitudinal slide: 0.025 - 45,000 mm/min Feed rate, cross slide: 0.025 - 60,000 mm/min Rapid traverse, longitudinal/cross: 45 / 60 m/min Cutting force, longitudinal/cross: 10,000 N / 5,000 N Dcsdpoz Ng R Dsfx Ak Aep Space requirement: approx. 43 m² Weight: approx. 10,000 kg Requested item: Transportation costs will be provided in a separate quote.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 400 V3 with driven tools and C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 2000 Dsdpfxotpuh Aj Ak Ajcp _ Machine parameters: - head: 12 - tools for VDI 30 holders (every second socket driven) - max. rpm 5000/min. - max. turning length in the Z axis: 640 mm - max. turning diameter in the X axis: 290 mm - C axis - driven tools - BERG KH 200 spindle holder - max. shaft diameter Fi-65 mm - finished part collector - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: used, Year of construction: 2001, turning diameter 400 mm turning length 549 mm control HEIDENHAIN Eltropilot swing over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm Dcodo Ah Eb Topfx Ak Aep main spindle bore 79 mm main spindle speed 25 - 5000 U/min main spindle drive 21 kW max. torque on the spindle max. 240 Nm 120 mm c-axis, speed 100 U/min C-axis Haltemoment 200 Nm C-axis resolution < 0,04 ° sub spindle bore 56 mm sub spindle speed 25 - 5000 U/min sub spindle drive 9 kW max. torque on the spindle max. 72 Nm 90 mm c-axis, speed 100 U/min C-axis Haltemoment 150 Nm C-axis resolution < 0,04 ° feed power X/Z axis 3,5 / 7 Nm rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min tool turret 1 x 12 Stationen number of driven tool stations 12 speed of driven tools 4.000 U/min total power requirement 44 kVA Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle, 3 collets, chip conveyor, coolant with band filter device

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in good technical condition. Swinging diameter over the bed: 500 mm Distance between centers: 780 mm X-axis travel: 200 mm Y-axis travel: 80 mm Control system: Siemens 840 Total operating hours: 26,501 h Max. turning length: 500 mm Maximum turning diameter: 200 mm Turning diameter over the bed (max): 500 mm Distance between centers: 780 mm Maximum spindle speed: 6000 rpm Workpiece weight: 45 kg Weight: 4500 kg Dodpo Abxwfefx Ak Aecp Filtration system Includes a CNC Spacesaver SS 2500 bar feeder (2018) Inspection in operation is possible by prior arrangement.

Year of construction: 1997, condition: used, X-axis travel: 220mm, Z-axis travel: 635mm, swing diameter over bedway cover: 570mm, swing diameter over cross-slide cover: 420mm, main spindle nose diameter: 170mm h5, main spindle diameter at front bearing: 120mm, main spindle bore: 79mm, drive power at 100% duty cycle: 21kW, max. torque: 240Nm, spindle speed range: 25-5,000rpm, C-axis speed: 100rpm, holding torque: 200Nm, counter spindle nose diameter: 120mm h5, counter spindle diameter at front bearing: 90mm, spindle bore: 56mm, chuck diameter: 140mm, drive power at 100% duty cycle: 9kW, max. torque: 72Nm, spindle speed range: 25-5,000rpm, travel: 575mm, rapid traverse speed: 24m/min, Z-axis feed force: 7kN, X-axis feed force: 3.5kN, X-axis rapid traverse speed: 20m/min, Z-axis rapid traverse speed: 24m/min, X/Z ball screw dimensions: 32x10mm, length: 3565mm, width: 1700mm, height: 1700mm, weight: 4.7t, operating hours: 79,630h, the machine is currently not operational due to damage to the tool turret, an on-site inspection is possible. Djds Agwqtjpfx Ak Aocp

Condition: ready for operation (used), Year of construction: 2005, operating hours: 48,000 h, functionality: fully functional, turning length: 1,080 mm, turning diameter: 600 mm, spindle speed (max.): 2,500 rpm, total height: 2,140 mm, total length: 5,300 mm, total width: 2,160 mm, overall weight: 9,000 kg, spindle diameter: 530 mm, Equipment: documentation/manual, Gildemeister CTX 620 — это тяжёлый токарно-фрезерный ЧПУ-станок, предназначенный для обработки крупных и сложных деталей. Станок оснащён гидравлическим патроном 21″, системой управления Siemens Sinumerik 840D, а также осью C, осью Y и приводным инструментом, что позволяет выполнять на одном станке токарную обработку, фрезерование, сверление, нарезание резьбы и другие операции. Большая рабочая зона, высокая жёсткость конструкции и мощный шпиндель позволяют выполнять как тяжёлое черновое точение, так и точную чистовую обработку деталей большого диаметра и длины. CTX 620 особенно хорошо подходит для серийного производства, где важно сократить количество установок детали и обеспечить стабильную точность обработки. Djdpfxoz Ehgqj Ak Ascp