Used Gildemeister Gdm 90 for sale (235)

Condition: used, Parts donor We are dismantling the CNC lathe GILDEMEISTER Type GDM 42/2A CNC control unit Eltropilot EPL 2 Machine no. 4.5733 Year of manufacture: 1989 Machine not operational – electrical issues Standard turning diameter: 185 mm Max. swing diameter: 400 mm Cross slide travel (X-axis): 190 mm Gsdpfodzqm Rex Ahnebn Longitudinal slide travel (Z-axis): 450 mm Spindle bore: 52.7 mm Spindle passage in draw tube: Ø 42 mm Max. feed rate X and Z: 3000 mm/min Spindle speed: 40–6300 rpm, stepless Spindle drive motor power: 22 kW Power supply: 400 Volt, 50 Hz, 45 kVA - Hydraulic 3-jaw chuck FORKARDT Ø 200 mm - 12-position tool turret, VDI 40, every second station powered - Powered tool stations at 6 positions - Electrical cabinet placed beside the machine Footprint (complete machine) L x W x H: 5000 x 2500 x 2100 mm Total weight of the unit: approx. 5.7 tons In good condition Transport dimensions: Required space for basic machine L x W x H: 3000 x 2300 x 1900 mm Weight of basic machine: approx. 4.8 tons Required space for electrical cabinet L x W x H: 2500 x 550 x 2000 mm Weight of electrical cabinet: approx. 450 kg Without chip conveyor Main motor missing Individual parts available on request

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Gsdpfx Aeuyx Hzohnjbn

Condition: used, CNC control, numeric control, from GILDEMEISTER GDM 65/2A Gsdpfx Aheh Ecnaenebn GILDEMEISTER type Eltropilot EP20 GD-2A year of manufacture 1989 Order: 150 299 Ser. No.: 0.854.183 Mains connection: 220 VAC 50 Hz Rack with 20 module places - 11 Built-in modules Dimension W x H x D 480x 260 x 220 mm Weight approx. 7 kg The control comes from a lathe Gildemeister GDM 42/2A. Further components from the Gildemeister can be found under stock no: 60343, 60346, 60347

Condition: ready for operation (used), Gildemeister VAP4 / VAP 4 AES 1 / 0.881.051-2 card SN 5899090, used, normal signs of use, 100% functional, scope of delivery as per photos Gjdpfxetztfgj Ahnobn

Condition: used, Year of construction: 1998, operating hours: 10,463 h, turning diameter over cross slide: 455 mm, turning length: 1,000 mm, turning diameter: 680 mm, spindle bore: 107 mm, travel distance Z-axis: 1,000 mm, Equipment: documentation/manual, Gildemeister CTX600E Heidenhain CNC Pilot 3190 control Between centers (TDC): 1000 mm Turning diameter over bed: Ø 680 mm Turning diameter over cross slide: Ø 455 mm X-axis travel: 320 mm Z-axis travel: 1097 mm Turret: 12 positions Driven tools: Yes Tool holder: VDI 50 C-axis: Yes Main spindle power: approx. 30 kW Spindle speed range: 4 – 2800 rpm Spindle bore: Ø 107 mm Max. chuck diameter: 500 mm X-axis feed force: 8 kN Z-axis feed force: 15 kN Rapid traverse X: 24 m/min Rapid traverse Z: 30 m/min Tailstock Quill diameter: 120 mm Quill stroke: 120 mm Taper: MK5 (6) Quill force: 14 kN Dimensions & weight Weight: approx. 9,000 kg Length: 4300 mm Width without guard: 2000 mm Width with guard: 2450 mm Gsdpfxjyl Sa Sj Ahnsbn Height: 2200 mm Note: The information on this page has been obtained and compiled to the best of our knowledge and belief, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The shown price is excluding VAT (VAT deductible for businesses).

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (max.): 22,000 rpm, controller model: Heidenhain 4290, Submitting a bid obligates the buyer to collect the machine by June 24, 2026! The machine will be dismantled on June 17, 2026, and then stored temporarily. The Z1 linear guide was recently renewed, and the S2 revolver drive was recently replaced. TECHNICAL DETAILS Turning length: 600 mm Turning diameter over cross slide: 410 mm Spindle speed: 22,000 rpm Tool turret: 12-position Tool holder: VDI 40 MACHINE DETAILS Control system: Heidenhain 4290 Operating hours Total operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h EQUIPMENT Large accessories package Powered tools from WTO Note: The seller can offer transport of the machine within Europe for an additional fee (offer upon request). Gbodpfszcpwcox Ahnjn

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gbjdpfx Ajza D Rfshnon Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: ready for operation (used), Year of construction: 2001, operating hours: 42,400 h, functionality: fully functional, travel distance X-axis: 800 mm, spindle speed (max.): 5,000 rpm, turning length: 300 mm, spindle bore: 79 mm, controller model: Siemens 840D, TECHNICAL DETAILS Turning length: 300 mm Travel range X-axis: 800 mm Travel range Z-axis: 300 mm Speed range main drive: 20 - 5,000 rpm Speed range C-axis: 0 - 100 rpm Spindle bore: 79 mm Torque main drive: 200 Nm Torque at the spindle: 240 Nm Torque clamping device: 28 Nm Rapid traverse X-direction: 100 m/min Rapid traverse Z-axis: 45 m/min Gjdpfx Aszb Efgohnobn Tools and tool magazine Number of positions in the tool magazine: 12 Speed of powered tool max.: 6,000 rpm Tool holder: VDI 40 Clamping area in the work area (W x H): 340 x 430 mm Number of T-slots according to DIN 650: 7 MACHINE DETAILS Control model: Siemens 840D Power main spindle: 27 / 20 kW Total power consumption: 50 kVA Electrical version - voltage/frequency: 3~ / 400 V / 50 Hz Interface: yes Spindle operating hours: 42,400 h Power-on hours: 93,728 h Dimensions & Weight Machine dimensions (L x W x H): 3,200 x 3,950 x 2,800 mm Chip conveyor dimensions (L x W x H): 3,400 x 1,150 x 2,180 mm Machine weight: 8 t EQUIPMENT High-pressure coolant system (capacity: 500 l) Chip conveyor with oil mist separator / industrial filter IFM 1000CTV Workpiece loading and unloading device with 20 stations Power chuck (225 mm) Hydraulics 6x various turning tool holders 2x various tool holders (rotating)

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Gedpfx Aexrg S Ijhnebn Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Gbjdpfx Aoq T I Izohnon Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: ready for operation (used), Gildemeister 852.14.00-00.21 card (851.75.00-00.21), used, normal signs of use, 100% functional Gsdpfx Ahoi D U S Uonsbn

Condition: ready for operation (used), Gildemeister 851.75.00-03.26 card (570 127/137), used, normal signs of use, 100% functional Godpfx Ahsi D U S Ronsbn

Condition: ready for operation (used), Gildemeister 852.14.00-01.34 bus adapter, serial number as per photo, used, normal signs of use, 100% functional Gbsdpfsi D U Tcex Ahnsn

Condition: ready for operation (used), Gildemeister 9.635.839 High Board 25-355 , serial no. according to photo, used, normal signs of wear, 100% functional Gedpfx Asi D U Tgjhnobn

Condition: ready for operation (used), Gildemeister VD030K AES2 card + Gildemeister 0.88.630-0 SI0ADP additional board, used, normal signs of use, 100% functional, scope of delivery as per photos Gsdpfx Ahotztftsnjbn

Condition: ready for operation (used), Dataram DR-717 32K x 17 card (Gildemeister) , serial no. according to photo ,used, normal signs of wear, 100% functional Godpfx Aji D Un Rjhnebn

Condition: used, Year of construction: 1998, swing diameter max. over bed cover 570 mm swing diameter over face slide 420 mm control Heidenhain CNC PILOT Gbjdpfxszcfc Is Ahnen longitudinal stroke 635 mm face stroke 220 spindle bore 79 mm centre distance 1000 mm chucking diameter 250 mm tailstock taper MT 4 feed speed longitudal 0,025-24.000 mm/min. feed speed face 0,025-20.000 mm/min. power feed longitudinal 7.000 N Feed Force Face 3.500 N total power requirement 44 weight of the machine ca. 5,7 t dimensions of the machine ca. 7,5 x 4,0 x 1,7 m Accessories: - 3 clamping jaws - various tool holders

Condition: used, Year of construction: 2000, control Heidenhain turning length 1.000 mm Gbjdey A Tdbspfx Ahnjn turning diameter over bed 500 mm turning dia. over slide 290 mm centre distance 1.500 mm x-axis 260 mm z-axis 1.000 mm spindle bore 70 mm spindle tunring speed 3.000 U/min spindle motor 12 kW Number of working hours ca. 64.469 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 of which 6 stations are driven - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) - Complete programming manual - Mechanical and electrical documentation Gjdpfx Ahszcd Hlenebn - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: not inspected (used), Year of construction: 2001, operating hours: 31,782 h, functionality: unexamined, overall weight: 5,500 kg, Without tools Gbjdpfxozbqg Ns Ahnon

Condition: ready for operation (used), Year of construction: 1993, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, number of axes: 2, Horizontal turning machine manufactured in 1993. This Gildemeister CTX 400 is in good condition and fully functional, featuring EPL 2 control. It comes with an extraction hose/pipe connected to the side enclosure. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details. - Manufacturer: Gildemeister- Model: CTX 400- Year of Manufacture: 1993- Condition: Good / Fully functional- Control: EPL 2- Attached Equipment: Extraction hose/pipe visible connected to the side enclosure Gsdpfx Aezb E E Tjhnjbn Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1991, travel distance X-axis: 212 mm, travel distance Z-axis: 640 mm, number of axes: 2, Horizontal turning machine manufactured in 1991. This Gildemeister CTX 400 features a reliable EPL 2 control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details. Gjdpfx Aszb Ewcshnsbn - Manufacturer: Gildemeister- Model: CTX 400- Year of Manufacture: 1991- Condition: Good / Fully functional- Control System: EPL 2 Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 455 mm, turning length: 1,000 mm, spindle bore: 107 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 4 rpm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 3 m/min, Equipment: documentation/manual, rotational speed infinitely variable, The machine is currently still in operation but will be decommissioned due to the operator’s retirement. Available from week 30. Gbodpozbik Tefx Ahnen

Condition: good (used), General Information: Model: Gildemeister CTX 400 Series 2 Year: approx. 2000 Control: Heidenhain CNC Pilot Godey Ixxbjpfx Ahnobn Configuration: C-axis with driven tools Technical Specifications: Max. turning diameter: ~400 mm Max. turning length: ~600 mm Swing over bed: ~570 mm X-axis travel: ~220 mm Z-axis travel: ~635 mm Spindle: Spindle speed: up to 5000 rpm Spindle power: approx. 21–28 kW Bar capacity: ~79 mm Turret & Tooling: 12-position turret VDI 30 tool holders C-axis for milling/drilling operations Rapid Traverse: X-axis: ~20 m/min Z-axis: ~24 m/min Condition & Maintenance: The machine has recently undergone a complete hydraulic overhaul Brand-new hydraulic pump installed Full service completed in February 2026 Current status: The machine is showing an X-axis alarm Therefore, it is offered for sale as-is in current condition Additional Information: Machine can be inspected on site Known as a solid and reliable turning center suitable for medium-sized parts Ideal for turning operations with additional milling capability (C-axis )

Condition: excellent (used), Year of construction: 2012, operating hours: 14,901 h, functionality: fully functional, DMG MORI / GILDEMEISTER CTX beta 1250 TC 4A Gbsdpfozbg Txox Ahnsn CNC turning/milling center DMG CTX beta 1250 TC 4A, manufactured in 2012. The machine is equipped with a Siemens 840D / ShopTurn 3G control system and features a main and counter spindle, B-axis, Y-axis, upper milling spindle, and a lower turret. Current operating hours are approximately 14,901 hours, and current spindle hours are approximately 5,000 hours. The machine is still connected to the utilities and can be inspected by appointment. Condition: Exceptionally Good / Superbly Maintained Technical Specifications Process: Turning / Milling / Complete Machining Machine Type: CTX beta 1250 TC 4A Year of Manufacture: 2012 Weight: approx. 16,000 kg Power: 85 kVA Control System: Siemens 840D / ShopTurn 3G Main Spindle / Counter Spindle: 1 x FNC 250 each, up to 5,000 rpm Main Spindle: Hainbuch SpannTop nova Modular 80 HS Internal Clamping Device: Diameter 77 mm GS Partial Internal Clamping Device: Diameter 67 mm x 700 mm Coolant System Pressure: 8 / 20 / 40 / 80 bar Short Bar Loader Magazine: IRCO ILS-RBK 100/16 Upper Milling Spindle: HSK-63A, 24-position disc magazine Travel Ranges Upper Unit: B-axis +/-110 degrees, Y-axis +/-100 mm, X-axis 450 mm, Z-axis 1,200 mm Lower Turret: VDI 40, 12 tool positions, X-axis 195 mm, Z-axis 1,200 mm Additional: Turret collet chuck SMW SLU-X-2-ZS 8-101 mm Footprint: approx. 9,200 x 2,600 mm including exhaust filter system, chip conveyor, and bar storage Video recordings + extensive photo collection available upon request via WhatsApp.