Used Curing Chamber for sale (2,396)

Condition: excellent (used), Feutron Type: 3702/06 Water-cooled climatic test chamber Technical data: Test chamber nominal volume 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width 2970 mm Height 2370 mm Depth 1530 mm Rear wall Minimum insertion dimensions: Width 2970 mm Height 2390 mm Depth 1550 mm Test chamber: Width 2000 mm Height 1000 mm Depth 1000 mm Double-leaf door, clear width Width 2000 mm Height 1000 mm Heated viewing window, 2 pieces Width 500 mm Height 600 mm Feed-through opening, 1 side panel left ∅ 75 mm Temperature range: -40...100°C Climatic range: 10...95°C Temperature difference, temporal ≤ ± 0.5...± 1.0 ΔN/K Change rates measured in the supply air without load Cooling up to 2.0 on average K/min Heating up to 2.0 on average K/min Humidity range: 10...95 %r. F. Humidity difference, temporal ≤ ± 3.0 %r. F. Dew point range, temporary down to -5... 95°C Refrigeration system: water-cooled semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Air conditioning and dryer refrigeration system air-cooled /hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical mains connection: 400V 3/N/PE.AC,50Hz Mains plug: CEE 5-роlig, 32 A, with 5.0 m cable Max. simultaneous power requirement 10.0 kW Supply line fuse: 3x 25, Char, C A Degree of protection IP20 Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone. Djdsk E Hnqjpfx Afnocc

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled Dsdpsrivfcsfx Afnecc The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, door hinge on the left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch temperature test chamber, water-cooled Performance data: With temperature change rate of 25 K/min Dsdpstz Rqmofx Afnocc Test chamber dimensions Height 750 mm Width 580 mm Depth 615 mm External dimensions Height 1775 mm Width 780 mm Depth 1895 mm Temperature range -72°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 Temperature homogeneity in space ± 0.5 to ± 2.0 Temperature change rate cooling 25 K/min Temperature change rate heating 25 K/min Heat compensation at -20 °C 8000 W Heat compensation at +20 °C 8000 W Test volume: 270 liters 2x lateral feed-through ∅ 125 cm 1x side feed-through ∅ 50 cm Cabinet is water-cooled Test room lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal power: 26 KW Rated current: 44 A Refrigerant: R-452A and R-23 Weight: approx. 980 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Dcodpfx Aew R Rt Isfnec Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Dedpfxswc Nvge Afnocc Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Dcjdpfx Afewgaykonjc Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber 600 Liter with Simcon 32-net Chamber is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratories, R&D, and quality assurance. Device description: For sale is a professional temperature chamber from manufacturer Vötsch Industrietechnik, model VT 7060 with SIMcon 32-net controller. This high-performance unit is suitable for a wide range of demanding environmental simulations, from material testing and electronics tests to long-term climate stress tests. Technical data (summary): Model: Vötsch VT 7060 Internal volume: approx. 600 liters Temperature range: –70 °C to +180 °C Temperature deviation when stabilized: Temporal: ±0.1 K to ±0.5 K Spatial: ±0.5 K to ±2.0 K Temperature change rate (without test specimen): Heating: 4 K/min Cooling: 3 K/min Control: SIMcon 32-net with touch panel Interfaces: RS232, optionally RS485/422 1 × port, NW 50 mm, left 1 × port, NW 125 mm, left 2 × ports, each NW 125 mm, right External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Dodpfxewybb Ns Afnjcc Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 404A and R 23 Weight approx. 675 kg For your safety as a buyer, please note the following: The following steps are carried out on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Shipping / Collection: Collection preferred Shipping via freight carrier on pallet possible Europe-wide. (Shipping costs according to expenditure) Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Dcjdpfx Ajxugq Asfnoc Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg Dcsdpfoxuqk Hsx Afnjc - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring/Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Dcjdpfsw Strcex Afnoc Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Liebisch KEA 300 Constanzo Functional condensate water test device for material and coating testing Description: This device is designed for performing condensate water or water vapor tests in accordance with common standards (e.g., DIN EN ISO 6270). It is ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. Dodpfexlzm Tjx Afnocc The design is robust, low-maintenance, and perfectly suited for research, laboratory, and quality control applications. Technical specifications: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Nominal power: 1,400 W Chamber dimensions: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Controls: None / manual operation Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data; specifications may be updated!) If you have any further questions, feel free to contact us by phone.

Condition: excellent (used), RS simulators Here we offer a temperature test cabinet. Air cooled Dcedpsgl Acrsfx Afnoc Temperature range: -50°C to +100°C Test chamber dimensions: Width 520 mm x height 520 mm x depth 500 mm External dimensions: Width 820 mm x height 1750 mm x depth 1300 mm current consumption: 13,5 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 800 kg Type: TS 150/45 (50) Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, information are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Weiss climate test chamber. Weiss climate test chamber water-cooled (refrigerant converted to R-452A) Temperature test Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Minimum temperature -42°C Maximum temperature +180°C Temperature change rate, cooling 4 K/min Temperature change rate, heating 3.2 K/min Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ±1.5 K Climate test: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r.h. Temperature deviation, temporal ± 0.1 to ± 0.3 K Temperature homogeneity, spatial ± 0.5 to ±1 K Humidity deviation, temporal ± 1 to ± 3 % r.h. Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4.1 kW Rated current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight Approx. 515 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate Dcedpfx Aoq U Sdcjfnjc 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, White Type: TS 130 Temperature shock test chamber water-cooled Specification: Temperature range hot chamber +60°C … +220°C Temperature range cold chamber -10°C … -80°C Switch between hot and cold chambers 10 sec. Temperature stability ±1 K Dcedpfx Afjvwckhsnec Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge) without....approx. 1820 mm with....approx. 1850 mm Depth (without and with test chamber door) without....approx. 900 mm with....approx. 1155 mm Dimensions of the lifting basket (test room) height 450 mm, width 500 mm, depth 600 mm Volume 130 liters Test room load max. 20 kg Test room floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device approx. 65 dB(A) Water-cooled cooling cascade Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current 26.0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) More We will be happy to answer any questions you may have over the phone.

Condition: good (used), CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Control: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Dcsdpfxevitmds Afnec Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: C-40/60 CTS small climate chamber air-cooled Test volume: 60 liters Temperature range: -40 °C / +180 °C Humidity range 10% to 98% relative humidity +10 °C to +90 °C in the temperature range +5 °C to +89.5 °C in the dew point range Dcjdpfx Aju Hlb Esfnec Dimensions (WxDxH): Inside: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal voltage: 230V 1/N 50 Hz Output: 3.3 kW Rated current: 13 A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate Dcodpfeu U Ixmex Afnjc 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2022, condition: excellent (used), Dycometal Type: CCK -40/1500T Climate chamber water-cooled Volume liters 1500 Internal dimensions height 1000 mm width 1000 mmm depth 1500 mm External dimensions Height 2200 mm Width 1293 mmm Depth 3400 mm Thermal test Minimum temperature -40°C Maximum temperature +150°C Thermal gradient cooling 2.0 K/min. Thermal gradient during heating 3.5 K/min. Temperature stability ±0.1°C to ±0.3°C Temperature uniformity ±0.5°C to 1.5°C Dcsdpfx Afou N Uugsnjc Climate test Temperature range +10°C to +90°C Humidity range 10% to 98% %RH Dew point range +6.5°C to +86°C Humidity stability ±1%RH to ±3%RH Water-cooled condenser Nominal voltage 400 V 3N~PE 50 Hz Output 16.1 kW 27.5 A Refrigerant R-452A Weight: 1120 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Espec Type: TSD-100 100 liters of usable space for larger test specimens up to 30 kg. Complies with all current international standards. Water-cooled Temperature range hot chamber: +60 °C to +200 °C Dsdjugl H Sspfx Afnscc Temperature range cold chamber: 0 °C to -70 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile version 2 stainless steel test baskets Cable gland Ø 100 mm Refrigerant: R404A 1kg R23 Power supply: 400V 3Ph 50Hz Max. Current consumption: 32A Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you Thermotron environmental test chamber. Thermotron Environmental Test Chamber Water Cooled Working volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to + 180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx 400 kg Internal dimensions width 610 mm x depth 610 mm x height 610 mm Outer dimensions width 890 mm x depth 1240 mm x height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating capacity in minutes -65º to 71ºC: 17 Heating power in minutes -65º to 180ºC: 43 Heating power in minutes -40º to 85ºC: 16 Electrical requirements in full load amplifiers 230/3/60: 19 Electrical requirements in full load amplifiers 230/1/60: 25 Electrical requirements in full power amplifiers 220/1/50: 27 Dedpfx Afomhfr Isnocc Cooling capacity in minutes 85º to -40ºC: 32 Cooling capacity in minutes 71º to -65ºC: 54 Cooling capacity in minutes 180º to -65ºC: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Type: SM-8-8200 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), pure engineering Type: pureGMC18 System for manual weighing processes Climatic chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specially designed for the gravimetric determination of particulate emissions in exhaust gas analysis and fulfills the normative requirements of the environmental authorities. All necessary climate control components are integrated. In combination with the HEPA filter, a contamination-free and precisely and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-decoupled granite for low-vibration installation of an ultra-microbalance Dcjdpfx Afslddmzsnsc Ionization device against static charge Flow protection for shielding the load cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with sockets, earthing bolt Advantages: Meets normative requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation pureGMC18 Temperature 22°C ± 1 K Humidity 45%r.H ± 3% Dimensions W/D/H 1,800/800/1,980 mm Clean room class 5 (ISO14644-1) Power supply 400V, 15A 50/60 Hz Weight: 650 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: as good as new (ex-display), Year of construction: 2018, Zwick / Roell Type: EC76G 1-1-2-0 361763 Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range - 80°C to + 250°C Traceable test results and perfect integration of the temperature chamber into the test system. Temperature control chambers: width 600 mm x height 1000 mm Temperature control chamber for the AllroundLine Dcsdpfx Ajlguwwjfnec Cooling using LN2 (liquid nitrogen) (-80°C external connection, not included) Voltage: 400/230 16A 3N〜50/60Hz Power: 4500W Weight: 180 kg Condition: unused Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber water cooled Temperature range -70°C to + 180°C Temperature deviation temporal ±0,1 to ±0,5 K Temperature deviation in time ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 450 mm Height 750 mm Outer dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test chamber volume 190 litres Dcjdpshh H Hisfx Afnsc Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on-site: 32 A slow-blow Sound level at 1m distance (free field measurement) < 69dB (A) lateral feed-through 50 cm / 125 cm Cabinet is water cooled Refrigerant: R 404A and R 23 Weight approx. 460 kg Type: VTS 7018-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Here we offer Vötsch shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -80°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Feedthrough ∅ 67mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Dodpsigg Hnefx Afnjcc Type: VT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: Temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation temporally in useful chamber center ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -65°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Operating hours: 27.903 hrs. Weight: 1000 kg For you as a buyer, the following information for your safety! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant Dcjdpfxoi Az Ege Afnoc 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: HT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.