Used Cutting Shear for sale (14,964)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer. Dcodszizkyopfx Ak Aep

Condition: good (used), Year of construction: 1995, sheet thickness (max.): 6,040 mm, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf Dodpfx Ako Ahyv De Ajcp

Condition: good (used), Year of construction: 1988, machine/vehicle number: 802107, Offer 26307 Dsdpfxezw Di Io Ak Aocp Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable, motorized 0.5 - 3° - Cutting gap adjustment by hand - Number of hydraulic clamping devices 18 pcs - Motorized rear stop 10 - 750 mm - Front angle stop + support arms - Number of strokes per minute, depending on cutting angle and cutting length 9 - 17 - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space requirement including rear stop, excluding front support arms approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - including: - Foot switch - Cutting line illumination

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, input voltage: 380 V, input frequency: 50 Hz, laser power: 6,000 W, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, finger protection, fume extraction, nozzle changer, safety light barrier, Pipe Size:7500mm/24ft, 9000mm/30ft, 12000mm/40ft Max. Acceleration: 1.0G Repeat Positioning Accuracy: ±0.03mm / ±0.0012in Positioning Accuracy: ±0.05mm / ±0.002in Pipe Weight Capacity: ≤260Kg / ≤573lbs Round Pipe Processing Range: Φ15mm - Φ230mm / Φ0.6in - Φ9.1in Dsdew I In Rjpfx Ak Ajcp Square Pipe Processing Range: 15×15mm - 230×230mm / 0.6×0.6in - 9.1×9.1in Laser Power: 3-20KW Bevel Cutting: Optional (Multi-functional option available)

Condition: used, Year of construction: 2003, operating hours: 53,000 h, machine/vehicle number: 672164914, control type: CNC control, controller manufacturer: Fanuc, laser type: CO₂ laser, laser source manufacturer: Panasonic, laser power: 2,500 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, pipe diameter (max.): 300 mm, pipe length (max.): 3,000 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,300 mm, working width: 1,500 mm, working height: 300 mm, travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, workpiece weight (max.): 750 kg, type of input current: AC, type of cooling: water, overall weight: 15,000 kg, total length: 9,000 mm, total width: 2,500 mm, total height: 2,500 mm, year of last overhaul: 2025, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, We are offering this used Mazak Spacegear MK2 2.5 kW 2D/3D laser cutting machine, manufactured in 2003. Manufacturer: Mazak Model: Spacegear MK2 Machine type: 2D/3D laser cutting machine Laser power: 2.5 kW Year of manufacture: 2003 If you have any questions or require further information, please feel free to send us a message or call us. Dcjdpfe Ahxbnjx Ak Aep

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: D08L/7603, Offer Number: D08L/7603 Machinetype: straightening and cutting machine Make: DEITERS Type: DaE Dcodpfjwi S Nvjx Ak Aop Constr. year: 1977 diameter range: 1-8 mm cutting length: 3000 mm speed - meters/min: 13-56 Location: In our warehouse

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/8493, Offer Number: D08L/8493 Machinetype: straightening and cutting machine Make: STOLLBERG Type: UDARA10 Constr. year: 1980 Dcodpfx Aezd U S Hok Asp diameter range: 3-10 mm cutting length: 1000 mm speed - meters/min: 22-71 Location: In our warehouse

Condition: excellent (used), functionality: fully functional, laser type: fiber laser, laser source manufacturer: Bistronic, laser power: 500 W, laser wavelength: 1,070 nm, table length: 12,001,200 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, overall weight: 3,080 kg, total length: 2,050 mm, total width: 2,500 mm, total height: 2,000 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, the machine is running well, the only reason that we sale out the machine is that the x and Y stroke are to short. machine is under power. Dcjdpfx As Afzlask Aep

Condition: new, Year of construction: 2026, functionality: fully functional, number of straightening rollers: 2, sheet thickness (max.): 1 mm, number of blades: 6, type of input current: three-phase, warranty duration: 12 months, total width: 1,700 mm, total length: 2,300 mm, total height: 1,800 mm, product width (max.): 1,250 mm, number of feed rollers: 2, SLITTING AND ROLL FORMING MACHINE YF-S Dcjde Afd Idjpfx Ak Aop

Condition: used, functionality: fully functional, Year of construction: 2000, machine/vehicle number: 152018, control type: CNC control, degree of automation: automatic, actuation type: electric, laser power: 2,500 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2026, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, The laser beam output power is 2.5 kW. The machine can cut sheets up to 10 mm thick. Additional equipment includes a sheet loading device and a device for unloading cut parts. The machine is in operation, and its functions and cutting quality can be demonstrated. Djdpfx As Ahxvzsk Ajcp The facility where the machine is installed can be rented, allowing production to continue without relocating the laser, which significantly reduces costs. A gas station with a nitrogen tank and oxygen cylinders is located near the facility. The facility covers an area of 1250 m2.

Year of construction: 2013, condition: used, Working area: 6000x2000mm, max. material thickness: 100mm, max. positioning speed: 35,000mm/min, machine height: approx. 1518mm, operating hours: 24,472h. Equipment: Kjellberg HiFocus 161i plasma power source, axis control: digital, maintenance-free DC servos with IRC, linear guides in X and Y directions, helical gearing on all axes, gantry-type CNC cutting machine, complete guide unit with accessories and cable drag chains, dual-side driven gantry bridge, sharp angles and corners, high contour accuracy, sectional under-table extraction system, gas control: automatic gas console, cutting technology: Contour Cut Speed, measuring system: IRC 2500 (incremental encoder). An on-site inspection is possible. Dsds Ahq Nropfx Ak Aecp

Condition: used, Year of construction: 1995, CNC portal flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm 8 x oxy-fuel torches, type ALFA Dedpfxjyay Dhs Ak Ascp 8 x Omnilift 200 Without rail system Without table Without filter 31126ä

Condition: used, Year of construction: 2015, CNC laser cutting system, fiber laser 3kW Manufacturer: Microstep Type: FIBERLAS MSF 4001.20BL Year of manufacture: 2015 With drilling unit + tool changer Complete system consisting of: Dcedpfxezhtp Eo Ak Aep - Cutting system, - IPG fiber laser source, - HIGHYAG cutting head and - KEMPER extraction system. Laser IPG Ytterblum Laser System YLS-3000-CUT-Y14 Rated power: 3,000 W (3kW) Operating mode: CW / modulated Power consumption: approx. 9 kW max. (8.3 kW typical) at 3,000 W Cooling: IPG air-water chiller Operating hours: approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Focus diameter: approx. 300 µm with 200 µm optical fiber Weight: approx. 6.2 kg Extraction system KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER KemTex ePTFE membrane filter Testing: IFA-tested, welding fume class W3 (high-alloy steels) Availability from 10/2026 31126ä

Condition: excellent (used), Technical specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel St40: 0.5 - 8.0 mm Maximum cutting capacity stainless steel: 4.0 mm Cutting gap adjustment with sheet thickness display Cutting angle adjustment: 0.5° - 2° Motor-adjustable parallel stop: 1050 mm Sheet support device Angle stop for 90° cuts Dcodps Ahta Tsfx Ak Asp Motor power: 11.5 kW Dimensions (length x width x height): approx. 3900 x 2150 x 2350 mm Weight: approx. 7.8 tons Condition: Overall, very good condition; retrofitted in 2026 Blades sharpened The machine cuts paper The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, total length: 4,300 mm, total width: 3,000 mm, total height: 2,500 mm, Year of manufacture: 1988 Colour: Grey Weight: 13.700 kg - Year: 1988 - Serial number: 15322 - Drive system: Conventional - Drive type: Hydraulic - Configuration: Guillotine - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None Dsdjyym Ihspfx Ak Aocp - Finger guard: Fixed - Transport dimensions: 4300mm x 3000mm x 2500mm (l x w x h) - Transport weight [kg]: 13700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Offer without obligation Paper Cutting machine complete flow line Make: POLAR Type: 137-XT Dcodpfx Ao Ahrzqok Asp Format: 137 cm Built: 2007 Mach.-Nr.: 7741406 total cuts 4,4 mill · digital program-automatic · color Touch-Screen display · cutting-table with air-cushion · 2 large sidetables · 2 center air corners · Polar Transomat TR 130 EL 4 - age 2007 · all tables chromed with air-cushion · safety-system Price under request Available immediately. More pictures and video is available.

Condition: used, Empty weight: 12.500 kg Dimensions (LxBxH): 725 x 287 x 178 cm Serial number: 152040 Control system: Mazatrol L32B X-axis: 2685 mm Y-axis: 1270 mm Z-axis: 100 mm Indexing table: yes Cutting capacity: 25 mm Dcjdpjz R S Tbofx Ak Ajp Maximum workpiece dimensions: 2,500 × 1,250 × 25 mm Maximum load: 615 kg Nominal laser power: 4,000 W Laser type: CO₂ – YB-L400A 8M Machine weight: 12,500 kg Includes Donaldson exhaust system Length: 7,250 mm Width: 2,875 mm Height: 1,780 mm Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: like new (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 1872509, overall weight: 1,000 kg, We offer a well-maintained high-pressure water pump UHDE HP 19/15-S. Year of manufacture 2007. Condition is as new. Dcedpfx Ae Ahw Erok Aop

Condition: like new (used), functionality: fully functional, Laser power ≤ 6000 W Wavelength 1064 nm Dsdo Ahzpcjpfx Ak Ascp Laser class 1 Supply voltage 400 V, three-phase Rated current 16 A Frequency 50 Hz Fuse 16 A, slow-blow Duty cycle 100% ED (continuous operation) Protection class IP40 Cooling: Internal air circulation Compressed air: 8 bar, less than 100 liters/min The RayCutter systems were specifically developed for the following materials: PKD: Polycrystalline diamond, for example for cutting blades. CBN/PCBN: Cubic boron nitride for extremely hard cutting tools. CVD diamond: Synthetically produced diamond. MKD: Monocrystalline diamond. Hard metal and diamond-coated tools: depending on machine configuration and machining process. Typical applications include cutting tool contours, producing precise cutting edges, relief angles, bevels, and complex tool geometries.

Year of construction: 2022, condition: used, Max. cutting capacity: 3100mm cutting length with a max. sheet thickness of 6mm and a tensile strength of up to 450N/mm². Stroke rate: 10-45strokes/min. Ram stroke max.: 210mm. Working pressure max.: 18MPa. Blade clearance: 0.05-0.60mm. Cutting angle: 0.5-3°. Backgauge range: 10-750mm. Equipped with a backgauge and front sheet supports with rollers. Overall dimensions X/Y/Z: approx. 4045mm/3770mm/1750mm. Inspection possible by prior arrangement. Dcedpfx Ako Ah Txws Aep

Condition: ready for operation (used), Year of construction: 2018, Komax Wire Kappa 310 Automatic Cable Cutting and Stripping Machine Year of manufacture: 2018 Cable cross-section, stranded conductor: 0.02-6mm² Max. outer diameter: 10mm Length accuracy: ±(0.2%+1mm) Cable length range: 1mm-700000mm Max. cable transport speed: 4.0m/s Quantity range: 1-99999 Max. stripping lengths: Full stripping: Side 1: 100mm Side 2: 40mm Partial stripping: Side 1: 999.9mm Side 2: 999.9mm Multiple stripping: Side 1: 999.9mm Side 2: 999.9mm Dimensions: 465mm x 460mm x 385mm (W x D x H) Weight: approx. 25 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers. Dedo Ah Rhmjpfx Ak Aecp The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Year of construction: 1993, condition: used, Automatic cut and strip machine designed to process various types of wire. Dsdpfxs Ah Sk De Ak Aocp

Condition: good (used), functionality: fully functional, machine/vehicle number: 5461866, cutting width (max.): 760 mm, overall weight: 1,040 kg, type of input current: three-phase, total width: 1,520 mm, total height: 1,400 mm, total length: 1,750 mm, input voltage: 400 V, cutting height (max.): 110 mm, input frequency: 50 Hz, Cutting width: 760 mm Insertion depth: 760 mm Cutting height: 110 mm Cjblvszvxdwotrrgohd Dcodpfe Ah S Absx Ak Aep Table height: approx. 900 mm Machine dimensions (W×D×H) approx. 1,520 × 1,750 × 1,400 mm Press pressure 150 – 2,500 daN (continuously adjustable) Machine weight: approx. 1,040 kg

Condition: good (used), Year of construction: 1978, working width: 3,100 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge: 700 mm, overall weight: 6,000 kg, total length: 3,400 mm, total width: 2,200 mm, total height: 1,800 mm, cutting length (max.): 3,100 mm, throat depth: 300 mm, Cutting length 3100 mm, cutting capacity steel 6 mm, motor 15 KW, working high 800 mm, back gauge 1000 mm motorised, footpedal, 2 frontarms, fingerstop, pneumatic back support, cutting angle adjustable, dimension 3400x2200x1800 mm, weight ca. 6000 kgs Dodpfx Aks Ah T Sme Aecp

Condition: excellent (used), For sale: Hypertherm Powermax 800 D plasma cutter in very good condition. /////Price stated is for 1 unit/////. Hypertherm Powermax 800 plasma cutter Djdpfxjz Sb I Dj Ak Ajcp Plasma cutter description: The Powermax800 plasma cutting system uses an inverter power supply to provide smooth DC output voltage, ensuring excellent cutting and grooving quality for mild steel, stainless steel, aluminum, and other metals. The Powermax800 power supply provides a constant output current with a variable range from 20 to 50 amps, ensuring optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and pierce metals up to 1 inch (25 mm) thick.