Used Cutting Taps for sale (15,102)

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 18 h, actuation type: electric, controller manufacturer: Trotec, laser type: CO₂ laser, laser source manufacturer: Trotec, laser hours: 10 h, laser power: 120 W, laser wavelength: 10,600 nm, working length: 1,016 mm, working width: 610 mm, working height: 305 mm, feed rate X-axis: 259 m/min, feed rate Y-axis: 259 m/min, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, type of cooling: air, warranty duration: 24 months, Equipment: CE marking, emergency stop, We are offering this virtually new Trotec Speedy 400 engraving and cutting machine with a factory warranty. It is located in a sufficiently dust-free environment with the correct temperature and humidity. Machine data as of October 1, 2026: - Total machine operating time: 18 hours and 8 minutes - Total laser source operating time: 9 hours and 21 minutes - Total registered travel distance: 241,066 meters Model: Speedy 400 Manufactured: March 2026 Country of origin: Austria Mains voltage: 230 V AC Frequency: 50/60 Hz Rated power: 2100 W Wiring diagram: 8086_Speedy400_wiring Laser type: CO₂ Laser power: 120 W Wavelength: 10.6 µm Pilot laser power: ≤0.99 mW Pilot laser wavelength: 655 nm New price: €76,040 If you have any questions or would like more information, please send a message or call. The pick-up date will be arranged in consultation. Two industrial fans for air extraction can also be included. Dwodpfx Ajz Il Aueb Noc

Condition: used, Year of construction: 2001, saw blade diameter: 150 mm, type of input current: three-phase, Startrite SC160 professional panel saw / sliding table saw, manufactured in 2001. Fully working and available to view/test by arrangement. Features include: • Large sliding table • Sliding crosscut table and adjustable fence • Rip fence • Main saw blade diameter: 150 mm minimum • Blade angle adjustment up to 45° • Professional workshop machine • 3-phase supply Dwsdpfxsz Nl Hks Ab Nec • Substantial, heavy-duty machine The machine is in used workshop condition with normal signs of use and cosmetic wear, as shown in the photographs. Collection from Tamworth, Staffordshire. Buyer to arrange suitable collection and transport. Please study all photographs carefully. Further information available on request.

Condition: used, The REMS Magnum pipe threader is suitable for pipes from 1/4" to 2". The following threading dies are included: - 3x: R1/2 - 3/4 - 5x: R1 - 2 The unit has been function-tested and comes with an electrical inspection carried out by a professional electrical company. Dsdpfjz Nlfgox Ab Newc

Year of construction: 2016, condition: good (used), functionality: limited functionality, The machine has been disassembled. It was in working order before disassembly. I have a video recording from before the disassembly. Sold as is, with no warranty or guarantee. Dwjdoz Iw I Ajpfx Ab Nsc

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Dwjdowwz Dljpfx Ab Noc Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. Dedpfxowwzude Ab Njwc With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: refurbished (used), Year of construction: 2016, operating hours: 4,155 h, functionality: fully functional, repeat accuracy: 0.076 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 300 mm, type of input current: three-phase, input voltage: 415 V, sheet thickness aluminum (max.): 300 mm, input current: 50 A, year of last overhaul: 2026, total length: 4,575 mm, total width: 2,285 mm, product height (max.): 300 mm, input frequency: 50 Hz, Water Jet cutter, Ward Jet Emerald E1530 1500mm x 3000mm cutting bed Dedpfx Absz Ihduj Newc Hypertherm HP 30 High pressure pump Clemco Abrasive Hopper type 2452. 200 litres New grills and recent service XL Touch screen control system WR_XL , with aux screen Ward jet and Sigma nest Software Fully serviced and ready to work. 1000lts aux cooling water tank, circulation pump and heat exchanger Service toolkit and spare parts Cutting capacity - 300mm

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Drive power: 15 kW EQUIPMENT Control system Suitable for secondary shredding The seller has a suitable conveyor belt in stock as an optional extra. Dsdpfx Absz Ngbvj Njwc

Condition: used, Year of construction: 2002, functionality: fully functional, Tapping Machine HAGEN & GOEBEL type HG-6 Year of construction: 2002 Spindle travel: 50 mm External spindle cone: B12 Rotation: from 355 to 1800 RPM Rotation right / left Throat depth: 120 mm BILZ Quick Attach Dsdsz Nxxyjpfx Ab Njwc Voltage: 380 V Width: 400 mm Depth: 600 mm Total height: 800 mm Weight: approx 100 kg

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting Dodouc Sifopfx Ab Njwc ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, automatic laminated glass cutting table for glass sizes : 3710 x 2600 mm max. glass cut : 3700 mm laminated sheet thikness : 33.1 - 88.12 - 1010.4 float glass thikness : 3 - 10 mm min. squaring : 110 mm max. squaring : 2750 mm min. breaking : 60 mm min. separation : 60 mm work table height : 900 mm Djdpfx Absz Nft De Nowc machine dimension : 5000 x 3500 mm including loading table BAVELLONI REV 372 R with integrated loading arms max. loading glass size : 3710 x 2600 mm machine dimensions : 3500 x 4250 mm total dimensions for both tables work space : 7000 x 5000 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm glass thikness : 2,3 - 19 mm Dedpfx Abez N Dqus Nswc This table has NO option for low e deletion

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, automatic tiltable float glass cutting table for half jumbo sizes workable dimension : 3760 x 2760 mm 5 tool store the pc is supplied complate with CR ROM drive , 3,5" modem and network card , color monitor and windows with straight and shaped optimisation possibl for vinyl cut and digitalization with laser for templates glass thikness : 3 - 19 mm acceleration speed : 150 m/min cutting tolerance : 0,15 mm breaking bars : 2 + 1 Dwedpfxsz Imnfs Ab Nec workable table height : 900 mm machines sizes : L x w x H = 6000 x 2275 x 2250 mm installed power : 5,6 Kw weight : 2500 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, Well-maintained plasma cutting machine with a 6,000 × 2,000 mm working area, Kjellberg plasma source, and Donaldson Torit DCE extraction system. Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Machine type: Plasma cutting machine Year of manufacture: 2016 Working area: 6,000 × 2,000 mm Plasma source: Kjellberg HiFocus 161 neo Cutting range, sheet thickness: 1–30 mm Extraction system: Donaldson Torit DCE Condition: Good Djdpfxez Hykkj Ab Newc Maintenance: Serviced annually by MicroStep Location: Rottweil The seller can assist with loading.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Dsdpfx Abez D D N Ee Njwc Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Condition: excellent (used), Year of construction: 2021, operating hours: 700 h, functionality: fully functional, cutting width (max.): 3,200 mm, table height: 800 mm, overall weight: 1,610 kg, total width: 4,000 mm, total height: 800 mm, total length: 7,000 mm, table width: 3,200 mm, table length: 3,200 mm, Equipment: safety light barrier, Are you looking for a Zund cutting table in perfect condition? Due to changes in our production processes, we are offering our exceptionally young and fully equipped Zünd G3 3XL-3200 for sale. Featuring a massive working area of 3200 mm x 3200 mm, this machine is the ultimate production tool for processing wide-format textiles and XXL flatbed materials. With only 700 production hours on the clock, the system is in absolute mint condition. Equipped with an extended table and a professional unwinding system, this setup is fully optimized for a highly efficient, continuous, and tension-free roll-fed workflow. Dedez Inc Repfx Ab Nowc Key Specifications & Configuration: • Working Area: 3200 mm x 3200 mm (3XL-3200) – Accommodates materials up to 3.2 meters wide! • Extended Table: Ideal for seamless material advance, easy weeding/offloading, and uninterrupted production. • Unwinding System (Roll Feed): Industrial textile unwinder ensuring perfectly tension-free and straight material feeding directly from the roll. • Software: Includes Zünd Cut Center (ZCC) software license. Included Modules and High-End Tools: • DRT (Driven Rotary Tool): Driven rotary tool specifically designed for reliable, fast, and wrinkle-free cutting of various textiles (such as banner material, polyester, canvas, and mesh). • Registration System: Integrated camera system for precise registration mark recognition and automatic contour compensation. Machine Condition: The machine is in absolute mint condition and has only operated in a clean production environment. It has been fully maintained according to factory guidelines. The Zünd is currently still installed under power and can be demonstrated fully operational for serious inquiries. Decommissioning, transport, and installation are at the buyer's expense and risk (assistance in contacting certified Zünd technicians can be provided).

Condition: used, Year of construction: 2018, functionality: fully functional, Working area: 3000 × 1500 mm Design: Downdraft / fume extraction table Plasma source: Hypertherm Powermax65 Dedpoz Iniqefx Ab Nswc Max. current: 65 A Plasma source power supply: 400 V / 3-phase Compressed air: min. ±5.9 bar CNC plasma cutting machine with automatic torch height control

Condition: used, Year of construction: 2024, functionality: fully functional, This is a cutting machine manufactured by Scharfen, model ES 300, year of manufacture 2024. The machine has been inspected in our in-house workshop and is fully functional. This machine was an incorrect purchase; it turned out that a miter cutting machine was required. Therefore, it was only used for a short period. You will receive an invoice with VAT shown. The list price of the machine is €4,082 net / €4,857.58 gross. Our offer price is €2,932.77 net / €3,490 gross. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning. Inspected & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Dwjdpoz Ilm Tjfx Ab Nec Technical data: W x D x H: approx. 580 x 635 x 420 mm Blade: 300 mm diameter, hollow ground, hard chrome-plated stainless steel, long cutting life. Cutting thickness setting: 0-25 mm (infinitely adjustable) Cutting length: 250 mm Cutting height: 210 mm Noise level: less than 70 dB (A) Grinding device removable Voltage: 400 V three-phase or 230 V single-phase Power: 0.6 kW Weight: approx. 51 kg Serial number: 2241096 Year of manufacture: 2024 Condition: used, inspected, fully functional Additional information: Large storage area for sheets Quick and easy to clean Extremely robust and low maintenance 100% stainless steel Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200711, compressed air connection: 6 bar, type of input current: AC, Equipment: documentation/manual, Bührs (W+D) BB700 16K inserting system with Müller Apparatebau cut-sheet front end, built 2008. Currently in daily production at our site in Barnstaple, North Devon, UK. Viewing under power available by appointment. MACHINE DETAILS - Model: Bührs BB 700 16K, serial no. 200711, built 2008 - Speed: up to 16,000 mailpieces per hour (single page) - Total mailpieces: 25,932,497 (September 2026). Individual feeder counts available on request. - Feeders: 8 insert stations (7 x RF2 rotary, plus RF2K friction feeder on station 8) and envelope feeder - Envelope sizes: C4, C5 and DL - Integrity: Lake Image Systems camera reading system (v02.06.27) with 4 cameras fitted for full matching: one on the Müller front end, two on insert stations and one on the envelope station. Capacity for up to 8 cameras. Lake camera PC runs Windows XP; standalone operation recommended. - Software: W+D BSC 3.0 (03_03_24_00), Inserter 03_02_63_00, Bührs IBC controller 2.4.2.0 - Delivery conveyor included - Power: 400/230 V three-phase + N + PE, 50 Hz, 11.4 kVA total load, 25 A max fuse (BB700 plate rated 5 kW) - Compressed air: 6 bar filtered, 945 Nl/min MÜLLER FRONT END (model / serial) - Cut sheet feeder: 6687c / 54787 - Transport unit: 6995c / 57255 - Spacer: 6975c / 57230 - Accumulator C4: 6999c / 61322 - Accumulator C5: 6895c / 55307 - Folders: 6826c / 58116 and 6822c / 57630 - Exit transports: 6989c / 57997 and 6815c / 58037 CURRENT CONFIGURATION The line has been modified from the original OEM layout (original June 2011 W+D drawing included in the pictures for reference only): - One RF2 feeder station added (original: 6 x RF2 + 1 x RF2K) - Müller front end reconfigured with folders and a C5 accumulator added - Turnover belt section, MT100 mailtable, distance module and eject gate removed. Output leg now approx. 3.5 m (originally 7.5 m). - Power and air figures are taken from the original drawing, which included the removed modules, so actual demand is likely to be lower. Please confirm as-installed dimensions on site before planning installation or transport. SERVICE AND MAINTENANCE Dwsdpfx Aboz Iy Tne Njc - Annual service by BW Converting, most recently August 2026, including a rebuild of the crossover section - Accumulator EPROM upgrade fitted January 2026 - Maintained in-house by our own engineering team, with daily safety checks and weekly, monthly and quarterly PMs against documented checklists - Full CMMS maintenance history available from August 2024 - All manuals available, in physical and digital copies REMOVAL Collection only. The buyer is responsible for decommissioning, removal and transport. We do not arrange decommissioning or delivery.

Condition: used, Year of construction: 2021, with swiveling saw blade, 45° to the right and left used in top condition low operating hours function tested partially refurbished Manufacturer: Rinaldi Type: TMA 42 AD Year of manufacture: 2021 Machine no.: 215783 CE type-tested Motor kW: 1.5 pneumatic Roller table length, right: 3000 mm with electronic digital display Roller table length, left: 4000 mm Stop flaps, number: 1 Dwsdpfx Asz I Udnsb Nsc 2-hand safety circuit Protective guard Cutting height mm: 160 Cutting width mm: 205 Blade diameter mm: 420 Dust extraction connection mm: None Space requirement approx. L x W x H mm: 800x900x1600 Weight approx. kg: 230 Total connection value approx. kW: 1.5 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without warranty

Year of construction: 1995, condition: ready for operation (used), working width: 1,550 mm, inner diameter: 152 mm, rotational speed (distance/time): 13,000 mm/min, The machine cuts from roll to DIN A4 or A3 size sheets, stacking 100 sheets per box, as required in the office supplies market. The machine's output at 7-up across the 210 mm width is: in 1 hour: 250 A4 boxes filled with 100 sheets each. Dsdpoy Ed Hfofx Ab Njwc Possible materials: photo papers, inkjet films, OHP transparencies, self-printable business card cartons, PVC sheets for bookbinders as covers for brochures, matt-coated laser films for labeling, felts, and much more! The machine is still in daily operation, and can therefore be inspected and tested. We would handle dismantling, packing, and loading onto truck or into sea container at our cost... EXW.

Condition: used, Year of construction: 2016, Bystronic BySprint Fiber 3015 + ByTrans 3015 Extended – Laser cutting machine with loading and unloading system Working area: 3000 x 1500 mm Dwedpfx Abjz Itl Dj Nsc Laser power: 4000 W - ByTrans 3015 loading and unloading system - ByVision CNC control with touchscreen - Handheld control unit - Fiber 4000 laser source - Cutting parameter assistant - Automatic nozzle cleaning - Automatic nozzle changer with 40 positions - Operator protection in the cutting area and loading/unloading area - Extraction system - Extraction device for sheet separation - Compressed air connection - Year of manufacture: 2016 Included packages: - Material specification package - Package for part tolerances & cutting surface quality - Package for cutting gas supply & cutting quality

Year of construction: 1995, condition: used, Foam cutting machine, as shown in the pictures. Stored in a warehouse – under a roof. Disassembled. Sold without any warranty or guarantee. If you have any questions, I can send more pictures and dimensions. Dwodpfxjz Iy Dgo Ab Nsc

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: NS-HG Type: Heavy pipe machine Beveling function: Optional Power range: Round pipe processing: 50mm~560mm Square pipe processing 50mm~560mm Chuck maximum Dodpfxsww Upzs Ab Njwc 30r/min Machine weight: 29t Power specification: 380VAC, 50Hz Optional loading rack: Three-chuck chain automatic loading rack Optional unloading rack: Three-chuck chain automatic unloading rack Standard: System 5000A, including nesting, supports servo (beveling) Zero tail material rear card hollow dust removal Optional: Weld detection, safety fence (light curtain), radiation-proof glass

Year of construction: 2020, condition: new, The Sapphire is the optimal solution for the heavy industry, handling material thicknesses up to 200 mm. It enjoys great popularity in a variety of production facilities – often those operating in three shifts – as well as in all applications where stability, efficiency, and process reliability are particularly important. Thanks to its high-quality equipment, the system is a versatile tool for the highest demands and a helpful instrument for process optimization. Having been deployed in over 400 industrial facilities worldwide, the Sapphire cutting system proves its worth every day. Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Extraction table 3000 x 6000 mm - Extraction system PFC 6 incl. extraction ducts - Delivery, assembly, and commissioning Key features • High dynamics and precision in automated 2D & 3D cutting of sheets, tubes, and profiles • Sheet metal processing up to a material thickness of 200 mm Dwjdpof Ak N Rofx Ab Njc • Extensive cutting data library for ideal user-friendliness • Designed for the highest demands under the most challenging conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2,000-7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeatability: DIN-EN 28206 Height of work table: 740-760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%