Used Dc Servo Controller for sale (49,100)

Condition: used, Bosch Bdjdpfozdir Nsx Afasi Type: SCARA SR8 SCARA SR8 pivoting arm robot with control unit Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have by telephone. Written orders can be placed by email or fax.

Condition: used, Stäubli Stäubli RX 60 robot with CS7MB RX60 control unit Manual Control Operator Type: Stäubli RX60 robot Control unit: CS7B RX60 Lifting weight (nominal load – kg): 2.5 kg Total weight: 44 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Bdedpfszditmjx Afaei We would be happy to answer any further questions you may have over the phone.

Condition: used, Fanuc Type: M-420I A A05B-1040-B201 / R-J3IB A05B-2474-B250 Fanuc robot with control unit Bedpfx Aezdit Tefaodi Fanuc robot M-420I A The M-420iA series is the latest generation of FANUC Robotics' high-speed family of industrial robots. Based on a simple and reliable design, the M-420iA offers sophisticated motion control and consistent performance with high productivity. The series is supported by an intelligent robot controller. The M-420iA is a four-axis, servo-driven, modular robot designed for high-speed packaging and material handling. M-420iA - 4 axes of motion, 40 kg payload. Programming teach pendant Large work envelope with a horizontal reach of 1855 mm Repeatability of +/- 0.5 mm at full speed and full payload throughout the entire work envelope. Linear motion speeds up to 4200 mm/s. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Stäubli Type: RX90 Bsdpfxjzdiu Sj Afasdi Controller: RX90 - CS7 Industrial robot Description: Axes: 6 Controller: CS7 Payload: 6 kg, and 12 kg at reduced speed Reach: 985 mm Approximate weight: 360 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA Bdsdpozd Uh Iefx Afasi The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Features Voltage, current, watt, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Köhler Type: HK 500 Salt spray chambers: Versatile testing options, from salt spray tests to fully automatic alternating tests Simple operation thanks to a graphical menu Customer-specific designs for many applications Easy operation via a touchscreen Internal dimensions W x D x H (without hood): 1080 x 675 x 580 mm External dimensions W x D x H: 1940 x 900 x 1220 mm Bsdpfezd Umksx Afajdi Test chamber volume: 500 liters Chamber temperature: Ambient temperature +5 – 60°C Humidification temperature: Ambient temperature +5 – 75°C Power connection: 230V, 1 phase, 50/60Hz, 2000W Compressed air: 4.5 – 8.0 bar / 3 Nm³/h Salt solution reservoir: 140 liters Material: Stainless steel (Completely overhauled and converted by the manufacturer to a Comfort control system) - Renewal of all electrical components - Renewal of all hose connections 400 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine approx.LxWxH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Bjdpfezd Sg Isx Afaodi Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

Condition: used, Mitsubishi Type: RH-3FH5515-1D1-S15 + CR751-03HD1-0-S15 Mitsubishi Industrial Robot Payload (kg): 3 Degrees of Freedom: 4 Speed (mm/s): 7200 Repeatability (mm): 0.01 Cycle Time (s): 0.44 Max. Reach Radius (mm): 400 Operating Range J1 (degrees): 264 Operating Range J2 (degrees): 282 Operating Range J4 (degrees): 720 Stroke of Z-axis (mm): 180 Controller Type: CR751-D Bodpezd Tutefx Afasdi Protection Class: IP20 Power Supply: 1 Phase (VAC) 200-253 Power Consumption (VA): 500 Product Dimensions & Weight Width (mm): 130, Height (mm): 511.5, Depth (mm): 580 Weight (kg): 14 Condition: used Scope of Delivery: (See Image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Mitsubishi Type: Melfa RV-3SB Industrial 6-axis articulated arm robot 6-axis articulated arm robot RV-3SB Maximum payload: 3.5 kg Weight: 38 kg Robot controller CR2B-574-S312 Teach pendant R46TB with color/touch display Bjdpfx Ajzd T Uasfajdi Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Bdodpozdy Iasfx Afaoi Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Weiss   Type: WK3-340/70   Weiss Climate Testing Chamber, Air-Cooled   Control Panel »Touch Panel« All control and operating commands can be initiated by simply touching the function symbols on the »Touch Panel« control panel.   Adjustable Feet To compensate for uneven floors and ensure sufficient ventilation of the machine section, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber.   Feedthrough installed as standard R1: 125 mm L1: 85 mm   Volume: 335 liters   Test chamber dimensions:   Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Data for temperature tests:   Minimum temperature -72°C Maximum temperature +180°C   Temperature deviation, over time ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K   Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min   Data for climate tests:   Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH   Temperature deviation, over time ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, over time ± 1 to ± 3% RH   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power 4.9 kW Fuse, to be provided by the customer: 16 A slow-blow   Refrigerant: R-452A/R23   Weight Approx. 585 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components Bdsdpsziiwusfx Afaei 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, specifications are subject to change!)   We will be happy to answer any further questions you may have over the phone.

Condition: used, Vötsch Type: VCS³ 7034-5 Vötsch Climate Testing Chamber, Water-Cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Data for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side opening: 50 mm Bdjdpfxeziyx Ns Afaei Side opening: 125 mm Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Rated power: 9 kW, Rated current: 20 A Fuse, on customer's side: 63 A slow-blow Refrigerant: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, TDK-Lambda Type: GEN10-240 Bodpfszg Exvsx Afaedi TDK-Lambda GEN10-240 | Power supply, DC, 1 channel, 2U, 10V/240A, 2,400W, RS232, RS485 in a 19-inch housing Technical data: Manufacturer: TDK-LAMBDA Power supply type: Programmable laboratory power supply Display type: LED x2 Number of channels: 1 Output voltage: 0...10V DC Output current: 0...240A Max. power: 2.4 kW Mounting: 19" rack Output voltage resolution: 1.2 mV Output current resolution: 28.8 mA Ripple and noise (regulated): ≤8 Vrms, ≤60 Vpp Input connector type: Terminal block Manufacturer series: GEN Operating temperature: 0...50°C Dimensions (width x height x depth): 423x43.6x432.8 mm Parameter display: 4 digits Software: LabVIEW Documents & Downloads Data sheet: Operating manual Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Vötsch   Type: VCS³ 7027-10   Vötsch climate testing chamber, water-cooled With a temperature change rate of 10 K/min   Data for temperature testing: Temperature range: -72°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K   Temperature change rate Heating: 10 K/min Cooling: 14.5 K/min   Data for climate testing: Temperature range: +10°C to +95°C (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) Temporal temperature deviation in the center of the usable space: ± 0.2 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours)   External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters   Side opening: 50 mm Side opening: 125 mm   Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse, on customer’s side: 63 A, slow-blow   Refrigerant: R404A/R-23   Weight approx. 835 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone. Bdsdpfjzh Huuex Afaei

Condition: used, Epson Type: G20-A01SR / RC180 Epson SCARA robot with Epson robot controller Epson SCARA G20 Long arm with high force The G20 manipulators are suitable for very high payload capacities, such as heavy components or packaging units with high weight (up to 20 kg). Epson G20 Max. payload: 20 kg, Reach: 850 / 1,000 mm, Z-stroke: 180 / 420 mm Epson controller RC180 Condition: untested / defective replacement! Condition: used Bjdpfjzh U S Usx Afaedi Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Stäubli Type: RS 60 / Controller CS8 C Stäubli RS60 robot with CS8 C controller for demanding pick-and-place applications. Payload: 2 kg Axes: 4 Description: Working range: 600 mm Inner radius: 166 mm Repeatability: +/- 0.01 W x H x D: 810 x 976 x 710 mm Weight: 70 kg Condition: used Scope of delivery: (See image) Bjdpezdyq Usfx Afaedi (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Mitsubishi Mitsubishi Industrial 6-Axis Articulated Arm Robot RV Series Industrial Robots Compact and powerful, offering flexible automation and high reliability. The RV series provides a highly dynamic 6-axis articulated arm robot for the highest level of quality. Type: RV-3SDB-S15 Number of axes: 6 Maximum lifting capacity: 3.5 kg Bdjdpfx Ajzdyuajfasi Reach radius: 642 mm Weight: 38 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: used, IPG Ytterbium Bodpfozdyyvex Afasdi Type: YLP-C-1-100-20-20 IPG Ytterbium fiber laser with controller IPG Ytterbium fiber laser Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2018, operating hours: 7 h, ABB IRB6700-205/2.80 + IRC5 controller + TPU DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all aspects of industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Bjdpfx Afoz Taczoasdi

Condition: excellent (used), 3HAC025338-002 Main Servo Drive Unit, DSQC 617 D6_2E2C2B, 20% discount when ordering more than 1 unit. Bdsdpfxoz Tac Ij Afaji DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, ABB Multimove 2*IRB1200-5/0.9 + IRC5 Multimove controller + TPU, as new Bjdoz Tadlspfx Afajdi DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, providing comprehensive service for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), Year of construction: 2013, ABB IRC5 Controller, 20% discount when ordering more than one unit. Bdedez Tafcspfx Afaji DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), Year of construction: 2020, operating hours: 200 h, ABB IRB360 Picker + IRC5 Compact controller, 2nd generation + TPU, as new DEVELOPMENT OF GSG ROBOTICS Bsdjz Taggspfx Afaedi GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: ready for operation (used), Indramat MAC071B-0-PS-2-C/095-A-0 motor, serial number: 11041, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bdedpfx Aez Tbcisfasi

Condition: ready for operation (used), Rexroth / Indramat MHD093B-035-PG0-AA motor, serial number 287096, SN: 093-10540. Professionally and completely overhauled and tested. 100% functional. Scope of delivery as shown in the photos. Bsdoz Tbc Nopfx Afaedi