Used Debarking for sale (125)

Condition: reconditioned (used), B., VK26M (1974 series) with motorized discharge table: - Main engine - Feeding table ( driven ) - Output table - Control cabinet Including infeed and outfeed table, workshop inspected * - debarking capacity: 10cm - 61cm diameter - 4 main decision makers - 4 cutting blades Nodpfx Afsfn Iu Iozscl - Rotor speed =235 rpm / min - Rotor öppning=65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( length of wood ) Dimension ( without infeed and outfeed table ) L= 9840mm Entry table: 3540mm x 1000mm x 1900 Main engine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Item 1 1 Content: Disassembly of machinery, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material of blade shafts on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: Piece V-belt for rotor drive Pos 4 1 Gear oil Pos 5 1 Material: Abrasive + Colours Pos 6 4 Valonkone piece peeling knife Pos 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta-start for 30 kw main motor with 3-phase delta start for 11 kW geared motor with start for 4 kw gear motor supply with start for 4 kw gear motor output Main Starter Emergency STOP

Condition: refurbished (used), Complete set of debarking knives for Valonkone VK26M consisting of: 4 pre-cutters Njdpeq A Ic Aefx Afzjcl 4 main cutters *Incl. metal box

Condition: reconditioned (used), Year of construction: 1974, Valonkone VK26M (1974 series) with outfeed table: - Main machine - Feeding table ( driven ) - outfeed table - switch cabinet IMMEDIATELY available from stock Including infeed and outfeed table, workshop inspected * - Debarking capacity: 10cm - 61cm diameter - 4 main cutters - 4 cutting knives - Rotor speed =235 rpm / min - Rotor opening = 65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( wood length ) Dimension ( without infeed and outfeed table ) L= 9840mm infeed table: 3540mm x 1000mm x 1900 Main machine VK26M : 2530mm x 2200mm x 2350 Ncedpfx Aetwrp Djfzel Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Pos 1 1 Content: Machine disassembly, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material blade axles on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: piece of V-belt for rotor drive Item 4 1 Gear oil Item 5 1 Material: Abrasive + paints Item 6 4 Valonkone piece peeling blade Item 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta start for 30 kw main motor with 3-phase delta start for 11 kw geared motor with start for 4 kw geared motor infeed with start for 4 kw geared motor output Main starter Emergency STOP

Condition: used, Spepdiscs 15" Ncjdsuk Sk Hjpfx Afzjl

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. The debarking rotor bearing is new.. The machine has been overhauled. Ncjdpfx Asxhdtzefzol 6-month warranty

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, round log debarker Valon Kone VK-820-C-3R, Type 820-RE/480/480-12/9-79-RHP-RS/3 Complete with a feed conveyor, feed speed up to 110 m/min Ncodpfxoxg Ttho Afzsl Manufactured in 2005 Serviced in 2023, not in use since

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, For sale on behalf of a customer is a Segem ERT 100. The machine was operational until removal. The rotor bearing was replaced in September 2023 (approx. 2000 hours). Njdpfoxhf N Djx Afzjcl

Condition: new, functionality: fully functional, - New ball slewing ring Ncjdpfx Afowt Ry Uszol - Outer diameter 1100 mm - Inner diameter 878 mm - Height 50 mm - 8 x M16 mounting holes - Renowned German manufacturer - Suitable for VK 26 models - Available immediately

Condition: new, Year of construction: 2025, - Dimensions 600 x 3,000 mm - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out Ncodpfou Rpibex Afzsl

Condition: as good as new (ex-display), functionality: fully functional, Debarking machine Valon Kone 26 MX - About 6000m3 debarked with the machine - Built as a prototype - Frame extended and additional support rollers added for debarking longer material - Debarking input automatic - Equipped with two frequency converters to adjust the speed - Ready for OmronSysac or other measuring device - Platform/undercarriage built in 1991 Ncedpjuhcf Iofx Afzjl - Crane Epsilon 21TM/year -91 - Renovated in summer -23 - Machine/plant weight: 27 tons - Length: 15 m - Combination length 22m when transported. Also included: Scania 143 - Year 1991 - Air suspension on rear axles - Robson - Registered as a work machine Aggregate: Stamford 250 kw/Perkins 2000 series 340 hp - Hours of use, about 4000h - Perfect condition

Condition: used, Valon Kone VK450 with infeed conveyor. Nedpfx Afjvt S R Ajzjcl

Condition: used, Valon Kone VK26M Ncsdovgtz Nspfx Afzjl With infeed and outfeed conveyors.

Condition: ready for operation (used), The machine has received a new rotor, with spare parts and documentation, without electrics and controls, an on-site inspection is possible. Ncodpforuq Dfex Afzjl

Condition: reconditioned (used), functionality: fully functional, The VK550 two-rotor machine can be equipped with 480 mm or 620 mm rotors (alternatively, one rotor can be a reducer). It comes complete with a feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Ncsdpfxjwfp Sao Afzel

Condition: reconditioned (used), VK 450 The debarker has been completely refurbished Ncsdpjq Hr N Iofx Afzsl

Condition: good (used), Year of construction: 2000, functionality: fully functional, Cambio 500 debarking line consisting of: Nsdpfx Afewxdimozjcl Infeed centering. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Tilting trough for long timber. Spare parts.

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Nsdpfx Asw Emhfefzjcl Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Nsdpfx Aetk N Dkjfzscl

Year of construction: 1989, condition: excellent (used), the subject of the sale is a feeder and a receiver for the sagem debarker. 100% functional Ncjdpfjlx Nu Usx Afzel

Condition: excellent (used), debarker cross feeder 4 x 5 m longitudinal feeder 13 m x 90 cm chain width 50 cm Nodpfxjv Ikqks Afzecl

Condition: good (used), log diameter 100-660mm Ncjdpfx Ajv Ap Sisfzel transverse and longitudinal feeder included

Condition: new, Year of construction: 2025, functionality: fully functional, For sale: NEW debarker with reducer for root swellings. Year of manufacture: 2025 Technical specifications: Log diameters: 15-60 cm Log length: 100-300 cm Installed power: 60 kW Additionally: -> Log handling on the roller conveyor, Ncsdpfx Afswxvv Sjzel -> Hydraulic ejection of debarked logs, -> Hydraulic centering pressure system. -> Horizontal bark conveyor included. -> All-season operator's cabin.

Condition: like new (used), Debarker with hydraulic infeed Njdpfx Ajrwwxajfzecl

Condition: used, Debarker bezner 40-140. Working. Video by request. Nodowkkbtjpfx Afzecl

Condition: excellent (used), functionality: fully functional, I will sell a HAWA debarker Very good condition Ncedpfxswnzq Tj Afzel