Used Deep Drilling Machine for sale (65,015)

Condition: good (used), Year of construction: 2002, Drilling and Milling Machine Manufacturer: KNUTH Type: TBF 500 Year: 2002 with coordinate table Spindle taper: MK4 Spindle speeds: 125-2500 rpm Motor power: 1.1 kW Table travel: X 500 mm, Y 160 mm Max. installation height: 300 mm Spindle stroke: 130 mm Table size: 200 mm x 730 mm Csdpjy Spubofx Al Rjrc Machine dimensions: Width 1000 mm, Depth 800 mm, Height 1800 mm, Weight approx. 350 kg In good condition.

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Crsdpjnzt A Hsfx Al Rsc Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Csdpfsfbt Huex Al Rerc Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Crjdpfx Aloyqxxrs Rec Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: used, Year of construction: 2022, functionality: fully functional, ZAFFERANI AZV MILL 1000 – Year 2022 Vertical CNC Drilling/Milling Machine Working area: 200 x 1000 mm Minimum glass dimensions: 500 x 300 mm Maximum glass dimensions: 3400 x 3210 mm Thickness: 3-25 mm Minimum hole diameter: 8.5 mm Power: 8 kW IN PERFECT CONDITION Credsy Ulvgopfx Al Rsc

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Crodpfoy Tt Rpsx Al Roc Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: excellent (used), Year of construction: 1998, Frame dowel and slot mortising machine from Hofmann HT 200 U with angle adjustment Specialized drilling machine for stair construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Angled doweling and baluster/rail drilling are easily possible due to the swiveling drilling unit. Motor with pole-change switch, two speeds Motor output 1.5 / 1.8 kW, 1400 / 2800 rpm Motor can be started via a practical handle switch Precision drill chuck with two inserts: 16 mm and M10 thread Table size approx. 1100 x 240 mm Csdpfoyfta Tsx Al Rsrc Linear laser for precise workpiece positioning Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of working height, allows doweling on two levels without repositioning Desired drilling heights for each drilling level can be set with a handwheel and digital counter; switching between levels is pneumatic and is operated from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, positionable at the front and back of the table 2 swiveling workpiece supports 2 side stops, can also be used as front support Mobile base Extraction port 80 mm 4 used but good drills: 9, 12, 16, 19 mm Few touch-ups on the paint, excellent condition, see original photos A used swiveling slot mortising machine in this condition is very rarely available. CE mark Operating manual Dimensions: approx. 1200 x 1200 x 1200 mm (LxWxH), weight 310 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available in our warehouse – see “more offers from this supplier.”

Condition: used, Year of construction: 1993, Number of drilling spindles: 8 pcs Pitch: 32 mm Drill chuck: Clamping surface, drill shank: 10 mm Operation: Foot pedal Drilling direction: from above, fixed Cjdpfxeza Hlfe Al Rerc Number of material clamps: 2 pcs Type of material clamping: pneumatic Design: stationary Location:

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm workpiece height max / mm - throat (max) 1000 mm Crjdpfevmtlhox Al Rsc - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Credpfowkba Hjx Al Rsc - 2-jaw drill chuck for up to 20 mm shank diameter - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm - Precision indexing rail 12 mm - Central locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: - Number of drilling spindles: 21 pcs. with 32 mm spacing - Drilling direction: Bottom and end face - Swivel range: 0-90 degrees, adjustable by handwheel - Pneumatic material clamps: 3 pcs. - Passage: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Diameter of dust extraction: 120 mm - Includes a variety of stops (see pictures) Availability: short notice Location: 63934 Röllbach Cjdpfx Aley Tczkj Rorc

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: Cjdpfxjw I Uy Ts Al Rjrc 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 110001, For sale: SACEM drilling and milling machine for machining large parts. The machine is fully functional and is currently used in production, primarily for finishing operations. The machine is particularly suitable for machining large, unwieldy parts. Weight: 10 t Voltage: 380 V, 50 Hz Power consumption: 20 kW Compressed air: 3.5 - 6 bar Spindle speed: 4 - 1600 rpm Feed rate: 3 - 2500 mm/min Tool holder: SK40 Drilling depth / spindle stroke: 800 mm Travel distances: x: 900 mm y: 900 mm z: 1200 mm Codpfx Alexbn A Tj Rorc Clamping area: 1000 x 1200 mm Maximum workpiece weight: 4000 kg Accuracy: 0.02 mm Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required. • Sale only within Germany or the EU. Sales/transfer conditions: • Disassembly, removal, and transportation are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Crodpfxjyilgdo Al Rec Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2016, total height: 2,350 mm, total length: 4,300 mm, total width: 1,880 mm, Colour: Grey Empty weight: 1.310 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Main motor power [kW]: 5.5 - Number of controlled axes [pcs]: 1 - Working range X [mm]: 3050 Cedpfoxy Rk Rox Al Rjrc - Working range Y [mm]: 900 - Working range Z [mm]: 60 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Max. spindle speed [rpm]: 18000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 35 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 12 - Max. drilling depth [mm]: 60 - Manual operation: Yes - Control: SCM Xilog - Software: Xilog Plus - Saw unit present: Yes - Spindle speed control: Continuously adjustable - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2006, total width: 1,100 mm, total length: 3,100 mm, total height: 1,700 mm, Colour: Grey - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 466 - Main motor power [kW]: 1.1 - Number of spindles [pcs]: 3 - Max. height adjustable [mm]: 120 - Table length [mm]: 3100 - Table width [mm]: 700 - Voltage [V]: 400 - Current consumption [A]: 2.8 - Fuse [A]: 16 - Power [kW]: 1.1 - Transport dimensions: 3100mm x 1100mm x 1700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Credex Ig H Tepfx Al Rec

Condition: used, functionality: fully functional, spindle mount: MK 2, quill stroke: 120 mm, Gillardon column drilling machine, drill press Credpfx Aloh N Svls Rec In good used condition. Manufacturer: Maschinenfabrik Wilhelm Gillardon II Bretten i. Baden According to the information on the attached label, the drilling machine is powered by a motor from VEM Elektromotorenwerke Thurm. Electric motor: Three-phase asynchronous motor, type KPER 80 K 4. VEM Motors Thurm GmbH D Zwickau 3 speed ranges via belt drive. Quill stroke approx. 120 mm, drilling spindle with Morse taper 2. Weight approx. 150 kg / approx. 1380 rpm MK2 drilling column Power consumption 0.75 kW – mains connection 380 V, 50 Hz. Inspection under power possible by prior appointment. Price €390 net ex location, plus packaging costs. All technical details are subject to possible typographical errors/mistakes. Sale exclusively within EU countries.

Condition: good (used), vertical or horizontal drilling 18 drills divided into 2 units of 6 each Cederfufdjpfx Al Rorc spacing 32mm 2 pneumatic clamps

Condition: used, Year of construction: 1970, taper MK 4 feeds: ja Cjdpfjxzu Dqsx Al Rjrc weight of the machine ca. 1,5 t

Condition: used, Year of construction: 2021, gebraucht 2021 3965 prompt, Zwischenverkauf v Taiwan 15600 € 1 12480 € 42 mm MK 4 280 - 1.100 mm 44 - 1.500 (12) U/min Stahl: M 25; Guss: M 38 1880 mm 870 mm Crodpfx Aljw Np Nxe Rjc 2210 mm 1800 kg 470 - 1.270 mm 0,05 - 0,15 (3) mm/min 2.2 kW 260 mm 280 mm 1.725 x 715 x 180 mm 0,75 kW 635 x 520 x 415 mm 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2017, gebraucht 2017 3901 China 8490 € 1 6790 € 32 mm MK 4 300 - 1.000 mm 32 - 2.500 (16) U/min 1760 mm 800 mm 2080 mm 1600 kg 530 - 1.000 mm 2.2 kW 240 mm 250 mm 0,75 kW 0,10 - 1,25 (8) mm/U box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Csdpfxjwiqlps Al Rjrc Details:

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm * Spindle support: 550 mm * Internal high-pressure coolant Travel distances * X: 5,000 mm * Y: 3,500 mm * Z: 2,350 mm * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Table Crsdpfey R N Ilex Al Rec * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Cedpfx Aleza A Ezs Rsrc Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Crsdpfx Ajza A Ebel Roc Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Cedpoza A Dwefx Al Rerc Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Total power requirement: 4 kW Machine weight approx.: 4.6 t