Used Deep Drilling Machine for sale (65,808)

Condition: used, Year of construction: 1982, Technical details: bore capacity in steel (diameter): 28 mm throat: 300 mm bore stroke: 150 mm drill capacity in cast iron: 30 mm spindle taper MT: MK3 spindle speed:: 200; 300; 500; 800; 1250; 2000 / 6 step U/min feed: manuell mm/U Distance spindle/table max.: 50 - 600 mm table clamping surface:: 330 x 300 mm table rotating: nein ° drill table adjustment: 550 (Handkurbel) mm column diameter: Ø 125 mm total power requirement: 1,5 kW weight of the machine ca.: ca. 300 kg dimension machine xH: 0,7 x 0,45 x 1,87 m Djdpfx Aju Idkbohneuu Equipped with RÖHM Supra 3 - 16mm quick-action chuck Machine vice *

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Djdpfxju Idkzo Ahnouu Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: used, Year of construction: 1966, Technical details: bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 - Drilling capacity in GG 22: 80mm at feed rate 0.5 - Horizontal travel of the drilling head: 1640mm Duodpfxeu Id Dbo Ahnsu - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Condition: used, Year of construction: 1960, Technical details: workpiece height max.: 600 mm Arm length: ca. 700 mm Dedex Afn Nspfx Ahnjuu bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 23 mm workpiece height max.: ./x. 2 mm drill capacity in cast iron: Ø 26 mm spindle taper: MK 3 bore spindle stroke: 135 (manual/automatic) mm range drill spindle revolution per minute: 7step U/min feed range: mm/U Table dimensions: 1200 x 500 mm table surface area: 1070 x 400 mm total power requirement: 3,55 kW weight of the machine ca.: 1,4 t Dsdpjv Ay T Djfx Ahnsuu dimension machine xH: 1,7 x 1,2 x 2,2 m Jib Length Arm: -vertical adjustment: 450mm and horizontal adjustment: 610mm -swiveling 360°, hydr. lock Right/left rotation for thread cutting with automatic switchover Operation via control panel Coolant tank with pump *

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 16 mm throat: 250 mm bore stroke: 125 mm spindle taper MT: MK 2 spindle speed:: 350 - 2000 / 8step U/min table clamping surface:: 280 x 355 mm table rotating: ja ° drill table adjustment: 520 vertical mm distance table - lower edge spindle: max. 600 mm column diameter: 110 mm total power requirement: 1,1 kW weight of the machine ca.: 272 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: -Drill chuck 13 mm -twist drill 10 mm with 45° countersunk cut Dodpfx Aeu Idhmjhneuu -machine vice *

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting Duedpfxeu Idhye Ahnju *

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification Djdpeu Ng Hnsfx Ahnsuu - central coolant device The machine is including accessories see pictures! *

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: Dsdpfx Ahsvc Aytensuu - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D. *

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 horizontal adjustment of the boring slide: 700 mm vertical adjustment of arm: 600 (motorisch) mm swivel range of the arm: 90° rechts/links Grad Djdpfx Ajvhbpqohnsuu distance table - lower edge spindle: min./max.: 200 / 1120 mm spindle taper MT: 4 bore spindle stroke: 420 (manuell-automatisch) mm range of revolutions per minute - continous: 20 - 2000 / 3 step U/min feed: 01, / 0,2 / 0,3 / 0,4 / 0,8 / 1,2 mm/U column diameter: 250 mm base plate surface area: 1100 x 600 mm total power requirement: 4,6 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,8 x 0,8 x 2,5 m Tool ejection via expulsion wedge Equipment: Coolant system with pump (without feed) Drill cube L: 760 x W: 500 x H: 510mm / horizontal surface 760 x 500mm and vertical surface 760 x 510mm Machine ilumination *

Condition: used, Year of construction: 1986, Technical details: bore capacity in steel (diameter): 18 mm throat: 250 mm bore stroke: 100 mm drill capacity in cast iron: Ø 23 mm spindle taper MT: MK 2 spindle speed:: 400 - 630 - 1000 - 1600 - 2500 U/min feed: manuell mm/U Distance spindle/table max.: 75 / 605 mm Dusdewiwwfjpfx Ahnju table clamping surface:: 250 x 250 mm column diameter: Ø 90 mm total power requirement: 0,55 kW weight of the machine ca.: ca. 170 kg dimension machine xH: 0,4 x 0,8 x 1,8 m

Condition: used, Technical details: bore capacity in steel (diameter): 30 mm throat: 260 mm bore stroke: 160 mm spindle taper MT: MK3 feed steps: 0,1; 0,2; 0,3 mm/U und manuell Dsdpfxova Higo Ahneuu spindle speed:: max. 1800 stufenlos U/min Distance spindle/table max.: 750 mm table clamping surface:: L: 280 x B: 355 mm table rotating: nein ° clamping table - swivable: 360 Grad drill table adjustment: vertikal: 600 mm column diameter: 130 mm threading: Nein / no total power requirement: 1,1 kW weight of the machine ca.: 570 kg dimension machine xH: 0,9 x 0,9 x 1,9 m This machine has 2 tables. Drilling table LxW: 370 x 500 mm Attachment table: LxW: 420 x 750 mm Clamping surface = 320 x 600 mm, transverse displacement (X-axis) 250 mm possible Ejection of tool via ejector wedge accessories: vice machine base *

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm Dsdpfxjvpfzyj Ahnouu column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *

Condition: used, Year of construction: 2017, machine/vehicle number: 17.018.011, Weight: 4,950 kg, travel ranges: X/Y/Z: 11 mm, drilling capacity: connection power: 7.5 kW, spindle speed: 3,000 rpm, current draw: 32 A, with a 12-position tool changer, 10 pneumatic clamps distributed along the entire bed length, with various fixtures and conveyor elements, operator terminal, control cabinet, safety fence with access door, machine footprint: 300x14,000 cm. Dsdpfx Aoy T Nz Dehnsuu

Condition: new, Technical specifications: Dujdpfxswhd Afo Ahnsu Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Thrust: 260 mm Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm X travel: 380 mm Y travel: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: - Cross table - Thread tightening spindle - Thread cutting device - Rotatable table - Height-adjustable protective cover - Spindle guard with limit switch

Condition: new, Radial drilling machine with hydraulic clamping and thread cutting device. Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Thread cutting steel Ø: 40 mm Thread cutting cast iron Ø: 50 mm Diameter of the column: 320 mm Projection (min/max): 330 - 1650 mm Travel of the spindle head (horizontal): 1320 mm Distance spindle nose - base plate (min/max): 465 - 1405 mm Travel height of the cantilever: 670 mm Clamping surface cube table: 630 x 500 x 500 mm Base plate size: 2550 x 970 x 200 mm Spindle holder: MK 5 Spindle stroke: 270 mm Speeds: (12) 37 - 1253 1/min Feed rates: (3) 0.06 / 0.10 / 0.20 mm/rev Motor power, approx.: 3.7 kW Max. total height: 2790 mm Weight, approx.: 3300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping - A special lifting safety device prevents the arm from dropping abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury, even if the threaded nut is excessively worn. Duodpfeuxrtfox Ahnju - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard equipment: - Tapping device - Coolant device incl. pump - Machine light - Cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - Protective device for spindle - CE

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Duedpfx Ahsp Atipensu Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: new, Infinitely variable pillar drill with fully-fledged tapping unit. Equipped with digital speed display as standard. Drilling table adjustable via rack and swivels around the column. Motor protection. Technical data: Drilling capacity: 40 mm Thread cutting: M 24 Spindle: MK 4 Drilling depth: 150 mm Spindle speeds, infinitely variable Range A: 65 - 540 1/min Range B: 245 - 2000 1/min throat depth: 265 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size: 560 x 470 mm / 14 mm Base plate size: 685 x 485 mm Dimensions, approx. (W x D x H): 580 x 950 x 2000 mm Connected load: 1.7 kVA Weight, approx.: 370 kg Equipment Duedeqfdywopfx Ahnou - Gearbox reduction gear - Large machine table - Digital speed display - Stepless speed adjustment - Thread cutting device - Table clamping and height adjustment from the front - Drilling depth stop - Overload protection Scope of delivery: - Coolant device - Two MK 3/2 reducing sleeves - LED machine light - Height-adjustable protective cover with micro limit switch - Operating instructions - CE/IEC conformity

Condition: new, Technical Specifications: Tool Holder: MT 3 Drilling Capacity: 25 mm Drilling Depth: 120 mm Throat: 250 mm Speed Range, Continuous: 0 - 2000 rpm Table Size: 470 x 420 mm Column Diameter: 100 mm Motor Power: 0.75 kW Weight, Approx.: 200 kg Duodpfevnrgajx Ahnju Dimensions (W x D x H), Approx.: 630 x 850 x 1760 mm Features: - Continuous speed adjustment with digital display - Height-adjustable spindle guard with micro limit switch - Base plate with T-slots - Emergency Stop Push Button - Star Grip - CE

Condition: new, Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting capacity: M 12 Spindle: MK 3 Drilling depth: 135 mm Infinitely variable spindle speeds: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Power supply: 400 volts, 50 Hz Equipment: - Thread cutting device - Digital display for speed as standard - Coolant device - LED machine light - Continuously variable speed adjustment - 24 V electrics - Base plate with T-slots - Drilling table adjustable via rack and worm gear and can be swiveled around the column - Emergency stop button - Full motor protection - Star grip - CE compliant Dsdpfx Ahjd R Acbenouu

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter Djdpfx Ahod R Nv Isneuu - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German Documentation and German Service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Dujdpfx Ahed Sd Tvoneu Delivery: - Table clamping and height adjustment from the front - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle Duedpfjda Nqxsx Ahnju in stock, available now

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Technical data: Drilling capacity: 30 mm spindle: MK 3 drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Mains connection: 400 V Weight, approx.: 230 kg Equipment: - Stepless speed adjustment with digital display - right / left rotation - T-slot stones - 24 V electrics - Height adjustable spindle protection device with micro limit switch Dujdpfsp Duagsx Ahneu - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: - Machine light - emergency stop pushbutton - full motor protection - star grip - CE

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm Dedpfxopxmlij Ahnouu number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle