Dental unit buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
Collet holder, tool holder, tool holders, milling cutter holding fixture, milling tool-SK40-clamping sleeves 28 mm full-price-10x-Available Weight 15 kg Prub9e more
3
380 Volt power requirement 1,0 kW turning speeds 850 - 8.000 U/min Ieizbwr weight of the machine ca. 35 kg. more
6
travels: - X - lengthwise 1,120 mm - Y - cross 345 mm - Z - vertical 400 mm Mujpx clamping surface 1,600 x 400 mm table load 1,500 kg spindle holder SK 50 - electromechanical tool clamping system swivelling milling head spindle speeds 18 steps 28 to 1,400 rpm infeeds: X - Y 18 steps 16 to 800 mm / min Z - 18 steps 5 to 250 mm / min rapid traverse X and Y - 3,150 mm / min rapid traverse Z - 1,000 mm / min coolant device electrical data 380 V / 18.5 KW weight approx. 4,100 kg doc... more
6
The head of the double reel can turn motor, so that on the one hand a coil can be inserted, while on the other hand continue (swing operation). The Dibalex band directional machine was 2012 being retrofitted. Technical data double reel H 5005 MD: Vsauum Built in 1994 Federal load per page: 5,000 kg Flange inner diameter: 450-530 mm Outer diameter: normal 1500-1580 mm, maximum: 1800 mm Band width: 160-500 mmBandgeschwindigkeite: 6.0-34.0 m / min Rotary way: 180 ° Total we... more
4
Mobile suction unit manufacturer Einhell Motor: 230 Volt, 550 Watt air power: 1150 m3/h Volume: 65 l Location: Off the shelf 54634 Bitburg Bafpscq2mi more
5
Finish aggregate, buffing, modular units, sizing unit, double end, edge banding machine, according to the scraper for edging machine br / br / -HOMAG Finish unit for cleaner job with buffing for disposal of glue residues on PVC edges br / motor 1.1kW br / speed 2840 U / min br / br -Side adjustable / height adjustable br / -1x aggregates available br / -Price piece br / -dimensions 350/350 / H500 mm br / weight 32 kg Wtar7yxfn more
4
FANUC A06B-6059-H003 AC spindle servo unit, with A16B-1100-0200 / 22B and A20B-0008-0242/02 02A, serial number according to the photo, used, low wear, 100% functional 9fdmtompo more
3
welding power 320 A 83ozattlj welding power ED 60% DC 320 A welding power ED 100% - 250 % voltage 400 V weight 87,0 kg range L-W-H 1.100 x 465 x 748 mm more
6
output: ca. 4 KW voltage: 380 V Bjqv2bmwk tank capacity: Nr.2: 120 l weight: Nr.2 = 209 kg weight: Nr.1 = 335 kg dimensions of hydaulic: Nr:1: L:1,0xB:0,9xH:1,2 m dimensions of hydaulic: Nr:2: L:1,05xB:0,6xH:0,95 m more


dental unit
every day

New machines via email!

Be informed!
3
diameter 0 mm Df9welz2e Shank diameter 53 mm Head diameter 69,3 mm length in total 128 mm Conus 30 Grad thread M 47 x 1,5 links daylight max. 32 mm weight of the machine ca. t dimensions of the machine ca. m more
4
grinding wheel diameter 100 mm power requirement 2,4 kW 9tk9j3yae speeds 1000-13500 U/min weight ca. 20 kg range L-W-H 500-300-400 mm more
3
BUG 623-56-54-E-000-36 kw - converter to supply the - intermediate circuit of the power modules - BUS 62 X - 2 x available-price item Qkreaqn8z more
3
FANUC A06B-6050-H203 velocity control unit, with map A16B-1200-0520/06A, used, very good condition, 100% functional M7ldt2 more
4
welding power 25 - 350 A (stufenlos) welding power 100 % ED 260 A welding power 60 % ED 300 A Mdyrz more
3
output: 3,5 kVA current: 7,8 A voltage: 400/440 V Cooling capacity: 6000 W flow temperature ,max.: 20-30 °C temperature range: 19°- 20° °C Yqkgsf8tt weight of the machine approx.: 130 kg dimensions L x W x H: 0,45x0,6x1,15 m 2 units available water pressure max. 10bar filling weight max. 1,5 kg coolant R134a connection tube each 1/2" watertroughput 25l/min with 7,5 bar on sale as is! more
4
liter capacity 250 l/min tank capacity 2800 l Coolant high preasure pump 40 bar Coolant high preasure pump 38,80 l total power requirement 22,00 kW Liebn weight of the machine ca. 1,50 t dimensions of the machine ca. 3,30 x 2,00 x H2,00 m Unit for max. 3 machines. 1x pump 250 l/min 3x High-Pressure-Pump 38,8l/min - 40bar more
3
Configuration: online or offline, pinfed transportation Speed: up to 150m/min. Rx8ct80sd Additions: set-up and format change automatically, stacker up to 700mm more
3
Hydraulic power unit hydraulic pump hydraulic pump max pressure 80 bar-liter 22 l / min hydraulic valve hydraulic tank hydraulic filter weight 101 kg Qk9d8hvzy more
4
FANUC A06B-6063-H215 #H510 spindle servo unit with A06B-6059-K032 unit adapter, used, good condition, 100% functional caution: Please separately request costs for shipping and handling! ATTENTION: Please inquire for charges for packing and transport separately! 9fdmj7g2n more
4
welding power 5 - 250 A (stufenlos) Sr2pv0 welding power 100 % ED 175 A welding power 60 % ED 200 A more
2
welding current - continuous: 250 A height: 800 mm Length: 900 mm protection class: IP22 total power requirement: 11,5 kVA weight of the machine approx.: ca. 147 kg space requirements of the machine approx.: B:0,55xL:0,9xH:0,8 m Welding Rectifier MIG MAG ait cooled - burner -hose package -pressure reducer - earth cable and pliers Mm9jxcbb This welding unit will be offered as is with a defect wire feed! [...] more
3
diameter 0 mm Shank diameter 0 mm Head diameter 0 mm length in total mm Conus Grad daylight mm weight of the machine ca. t dimensions of the machine ca. m 2gcqpqb29 more
4
Digitalanzeige Werkzeugspanner Ausfahrbare Pinole DRO Aumomatic tool clamping Extendible quill Bafnlezam0 Technische Daten / technical details: laengs automatisch / X-travel longitudinal 1120 mm Tquer / Y-travel cross 345 mm Tsenkrecht / Z-travel vertical 400 mm Tischgroesse / table size 1600x400 mm Spindelaufnahme / spindle taper SK50 Drehzahl / spindle speed 28-1400 UpM /rpm Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehoer und Beschreibung der Maschine sind unverbindlich... more
3
Siemens 6RB2120-0DF01 power unit, used, low wear, 100% functional, included with com. photos D2uhftwa3 more
4
welding power 30 - 400 A (stufenlos) welding power 100 % ED 300 A welding power 60 % ED 370 A Ytu7txsvw more
4
tank capacity: 800 l overpressure : zul./max.=ca.100 bar motor: 5x hydraulic pressure storage plant aggregate= LxWxH=2,48x1,73x2,13m oil tank :LxWxH=2,0x1,1x0,5m 5 motors ( from 3,8 up to 66 kW) coolant : nitrogen Y39jnws [...] more
3
Machine type MIG/MAG welding unit make MERKLE type RedMIG 2800 K Plants no. 69248 Supply voltage 3 x 400 volts Setting range 25-280 ampere Duty cycle 30% ED with 280 ampere 60% ED 210 amp Power setting 14 gears Cooling transformer by built-in fan Cooling TIG torch Run portable compact system Wire Feed toothed 4-roll drive DV 26 Securing 16 ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 80 kg Age 7 years Bahbyebjyv State factory held tested well with... more
3
specific output 20.2 liters/min operating pressure max. 4 bar Bextsjl tank capacity approx. 160 liters tank capacity at centre of filling level indication approx. 140 liters pump: - Rickmeier R25/16 FL-Z-DB more
5
Filter regulator, On-off valve, service unit, Water br / br / connection 3/8 "br / -2 units available br / -Price per piece br / -Abmessung 65/60 / H190 mm br / -weight 0.5 kg Ma9sj more
2
Siemens 6SE7090-0XX84-0AA1 control unit, used properly, completely overhauled and tested with 12 months warranty, 100% functional Blcffklq more
5
weight max. 20 t max. wheel diameter 360 mm range L-W-H 2.000 x 700 x 800 mm Syxqf0phm more
6
feed pressure: 60 bar Tptes7ckl drive power: 22 kW liter capacity: siehe Typenschild l more
3
Braking unit z axis from one scm record 120 Spare part number according to the spare parts list 2784750002 H L9vfqmcl features reclaimed second hand part, springs, gaskets, brake pad new! 6 months warranty more
2
weight 1 kg taper MK 4 9wustbi8p different center points. price per piece. more
5
Filter regulator, On-off valve, service unit, Water br / br / port "br / br maker Festo / type LF-D-5M-MAXI br / -1 units available br / -Price per piece br / -Abmessung 70/70 / H220 mm br / -weight 1.1 kg Xzejxttwg more
1
grinding wheel diameter unbek. mm 09pjkq2l power requirement unbek. kW total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6
Omron CQM1H-CPU51 programmable controller CPU unit, lot no.. 0930, used, properly completely overhauled and tested 100% functional with 12 months warranty, 9e7h7glk0 more
4
feed pressure: 2 bar Sw9ox9v2 liter capacity: 86-89 l/min total power requirement: 1;8 kW weight of the machine approx.: 100 kg space requirements of the machine approx.: L:.2;1xB:0;75xH.0;29 m as good as new swarf basins available. From manufacturer DMG usable for example parts such as machining centers or CNC lathes. The swarf basins are including 3 pieces coolant pumps (1,9 / 2,0 bar; 50/60Hz; 400V - 1,85A; 0,6/0,9 KW) swarf basins are mobile pump capacity for volume flow = 86-89 l/min more
3
offer consists of: Bcp9fy7i klicker for almost all horizon machines more
6
compressed-air driven high-pressure power unit operating pressure 700 bar max. pressure regulable inlet pressure 4 to 7 bar pump capacity 0.6 litres/min Grbdc2ma3 control by pneumatically operated remote control - hose length 6,000 mm space requirements width - 500 x depth - 370 x height - 450 mm   more
4
Filter regulator, On-off valve, service unit, Water br / br / port 1 "br / -1 units available br / -Price per piece br / -Abmessung 115/115 / H210 mm br / -weight 3.4 kg Xzekkv88i more
6
workpiece diameter 100 mm height 60 mm length 100 mm total power requirement 16 kW weight of the machine ca. 4 t 8w3k3tbur dimensions of the machine ca. 1,8x 2,5 x 2,5 m Plasma Welding cell with: - OTC/Daihen AX-MH31-BEFN Robot Manipulator - OTC DA 300 P Unit - Almega Robot Control Unit AXCSN1-C000 / software - OTC/Daihen Plasmamodul "plasmaBox-MIG" - Protective cabin with rotating table for workpieces and Siemens Automation - Siemens Simatic Panel and - Daihen Handkeyboard more
4
Mitsubishi K7PRFE printer interface unit, serial number according to the photo, with cable, in imitation leather handbag, used, normal wear, 100% functional, included with com. photos Dygsl92 more
4
Roll lenght: 1200 mm roll diameter: 95 mm Mnfiosrv total power requirement: 1,5 kW weight of the machine ca.: 2,0 t dimensions L x W x H: 4,3x1,5x0,45 m 4 roller conveyor available rolls are driven via motor (380V; 2,15A mit 1400 U/min) rolls are adjustable more
4
Hapv3rbmach.no. : 82990103 serial no.: 990418413 more
4
table length:900 mm table width:520 mm Lw9xt Thickness:60 mm dimensions of the machine ca.:900 x 520 x 60 m weight:750 kg One used clamping system vb DockLock 1x ground plate 900x520x60mm 1x Enerpac Turbo Pneumatic/Hydraulic Booster 1x plate Alu 800x600x20 mm 1x plate Alu 600x330x40 mm 1x plate Alu 500x400x40 mm 1x plate Alu 500x200x40 mm 6x plates Alu 400x400x40 mm more
5
Steuergeraet for electric forklifts, electric motor, DC motor, drive motor, drive motor br / br / br maker Nikki / -type 2E0002-06 br / -type 22710 FU460 br / -dimensions 140/100 / H35 mm br / -weight 0.3 kg Vrey03 more
6
liter capacity max. 250 l Gvcfco container volume 350 l Dimension coolant reservoir 1100 x 840 m total power requirement 4,1 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,1 x 0,9 x 2,1 m more


dental unit
every day

New machines via email!

Be informed!

to

to

Change search
DENTAL UNIT
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close