Used Depth Bars for sale (20,125)

Condition: reconditioned (used), complete tie-bar set (4) for DEMAG ET 330 Ledpfjfwctasx Abneac

Year of construction: 1990, condition: good (used), machine/vehicle number: 3-201065, Material passage in the supply pipe max .: 65 mm Ljdpfx Aedlm Dhjbneac for material lengths up to: 3000 mm Feed force infinitely adjustable up to max .: 550 N. Charging time approx .: 30 s elec. Connection / power requirement: 380 V / 1.5 kW Space requirement: 5810 x 920 x 1515 mm Weight: 1200 kg

Year of construction: 1998, condition: ready for operation (used), for material Ø: 6 - 80 mm for bar lengths: 100 - 915 mm Shooting table size: 945 x 800 mm Working height: 1400 mm height adjustable: +/- 200 mm elec. Connection: 220V Space required: 3420 x 1150 x approx. 1500 mm Weight: about 300 kg Ledpodtywwofx Abnsac

Condition: good (used), Year of construction: 1998, Baujahr 1998 Spindelstunden 52’000h Lajdpfotth Hgex Abnjc Stangendurchlass 40mm Fanuc Series 18i-T Späneförderer Toolsetter integriert 12Stationen 1Spindel, X und Z Achse Kurzstangenlader Spannzangenfutter F48

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam – similar, but not a Dynajet, Oertzen, Falch, etc. - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfecting. The following models are available: - TORPEDO MINI-E 3.8 M 230 Volt/50 Hz Powersteam, 8 l/min at 150 bar - TORPEDO MINI-E 5.8 T 400 Volt/50 Hz Powersteam, 8 l/min at 200 bar - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg Lasdpsfh Skaefx Abnsc - Includes 10 m high-pressure hose, spray gun, lance, and flat spray nozzle 25°.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, rotational speed (max.): 8,000 rpm, spindle speed (max.): 8,000 rpm, turning length: 134 mm, spindle motor power: 2,200 W, bar diameter (max.): 12 mm, turning diameter: 12 mm, Equipment: documentation/manual, - Max diameter: 12 mm - Max machining length: 134 mm - Main spindle speed: 8000 rpm - Spindle power: 2.2 kW - Counter spindle speed: 7000 rpm Lajdpfx Ajy Ru H Hjbnsc - Rotating guide bush - Fanuc controller - Iemca CH112 bar feeder Machine is currently under power and available for test cuts.

Condition: ready for operation (used), Year of construction: 1971, functionality: fully functional, We are selling our VDF Boehringer M 670 machine Lsdpfx Aoy Ecdpobneac

Condition: excellent (used), Year of construction: 2013, IRCO Profimat bar feeder Year of manufacture: 2013 Bar length: 3 m Laodexxq Uaopfx Abnec Bar diameter: 75 mm

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck Lasdpfsb E N Txjx Abnjc -Mouth size: Ø 290 mm -Recess inlet: Ø 268 mm -Bolt circle: Ø 168 mm -Mounting hole: Ø 21/31 mm -Mounting hole spacing: 148 mm -Through hole: Ø 70 mm -Weight: 43.5 kg

Condition: used, Used Bibby approximately 400 litre capacity 316 stainless steel vertical reactor. Unit bolted dished top and welded dished bottom heads. Approximately 750mm diameter x 950mm straight side. Internal rated 3.46 bar/full vacuum design pressure at 100 deg.c. External 316 stainless steel jacket rated 6.6 bar/full vacuum design pressure at 100 deg.c. Unit has top entry stainless steel agitator with Lightnin model LS25V drive. Unit is mounted on side support lugs. Specifications: Capacity: 105 gal Laedpjykn Rwsfx Abnoc Type of stainless: 316 Internal Pressure: 3.5 PSI Internal Temperature: 212°F Jacket Pressure: 95.8 PSI Diameter: 29.528" Straight Side: 37.402" Type Of Heads: bolted dished top, welded dished bottom Legs/Lugs: side support

Condition: good (used), Year of construction: 1998, Bar feeder Breuning IRCO ILS RBK 7212 Technical data: Type: ILS RBK 7212 Year of manufacture: 1998 Lsdpfx Aoy Ez Exjbneac Connection: 400 V Power: 1 kW Material diameter: approx. Ø 12–72 mm Bar length: up to approx. 720 mm (short bar feeder) Automatic feed Scrap piece ejector present Control panel with controller Accessories: Comprehensive set of guide channels (various diameters) Additional pusher rods Documentation available Various spare parts (see photos)

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: VBM, Manometer 0-10 bar, unused, original packaging -Type: 1/BM 20 M 20x1.5 260 Ø -Item No.: 13301-B44-01 -Number: 9x pressure gauges available Ledoyfmr Aspfx Abneac -Price: per piece -Cardboard dimensions: 310/310/H70 mm -Weight: 4.6 kg/piece

Year of construction: 2013, condition: excellent (used), For sale: 1 used H-beam crane traverse Manufacturer: SMV Scheunemann Type: 13-0163 SHTS60 Year of manufacture: 2013 Own weight: 4,105 kg Combined 60-ton and 28-ton load lifting points Ljdsit T N Aspfx Abnsac Dimensions L x W x H: 5,900 x 2,700 x 1,200 mm Can be inspected at our warehouse in 09599 Freiberg.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. Ljdpfow A Rv Ijx Abnsac 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Condition: used, Year of construction: 2007, Article: bar loading magazine Manufacturer: FMB Type: Minimag 18 Yob: 2007 Bar feeder was used on a cam-controlled long turning lathe Strohm M125 Two identical models are available for sale Please, contact us for getting more information and pictures on mail(at) or Lasdpfxoyttm Ae Abnoc *

Condition: used, Year of construction: 2007, Article: bar loading magazine Manufacturer: FMB Type: Minimag 18 Yob: 2007 Bar feeder was used on a cam-controlled long turning lathe Strohm M125 Two identical models are available for sale Please, contact us for getting more information and pictures on mail(at) or Laodpeyttmvsfx Abnsc *

Condition: excellent (used), Year of construction: 2001, I sell the bar conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Brand: CEFLA Laodpfst Rr Hbjx Abnjc Model: TR3000/133/RE/RU Total length 2,60m Band width 1450mm Feeding with electric motor 0,26kW / 0,35HP Fully working. Available immediately.

Condition: excellent (used), Year of construction: 2010, I sell the Finnrose bar conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Total length 4,20m Ljdpfx Ajt Rr Huobnoac Band width 1650mm Feeding with electric motor 0,37kW / 0,55HP Fully working. Available immediately.

Year of construction: 2000, condition: like new (used), Brand: IEMCA Model: CNC BOSS 542 / 44 Year 2000 Capacity: For bars from 5 to 42mm Maximum length: 4400mm Hexagonal bar diameter: 4.4mm - 36mm Laedpjiqx Uysfx Abnec Storage capacity: 28 bars of 10mm diameter Advance speed: 750mm/sec. Return speed: 800mm/sec.

Condition: excellent (used), functionality: fully functional, bar length: 1,615 mm, bar diameter (max.): 80 mm, reverse speed: 1,000 mm/s, overall weight: 580 kg, workpiece weight (max.): 250 kg, The bar feeder was purchased in 2019 and was connected to a DMG Mori NLX 2500 / 700. The bar feeder was hardly used. TECHNICAL DETAILS Connector: Harting Material Cross-Sections Round: 5 to 80 mm Square: 5 to 50 mm Hexagonal: 5 to 60 mm Bar Lengths Bar length: 500 to 1,615 mm Short bar length: 90 to 500 mm Performance Data Magazine capacity: 250 kg Bar changeover time: 30 s Feed rate: 0 to 500 mm/s Return speed: 1,000 mm/s MACHINE DETAILS Connection voltage: 230/400 V Control voltage: 24 V Power consumption: 2 kW Dimensions & Weight Weight: 580 kg Bar pusher travel: max. 1,710 mm Loading axis height: 905 to 1,252 mm Lajdpoy A Rlpofx Abnjc EQUIPMENT Short bar kit Handheld control unit Remote control Safety covering Fixed protective grilles

Condition: used, Year of construction: 1996, Victor Vturn-20 CNC turning centre, 10 station tool holder, Fanuc Series 0-T CNC, swarf conveyor, fitted air bench, with Hydrafeed Multifeed MLI bar feeder, serial no. 2766 (1996) Lsdpfxeyhw U Ds Abnoac

Condition: ready for operation (used), Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible. Lsdpfx Aoy D Tn Aebnoac

Condition: used, Year of construction: 2005, SPACESACER SS2101 rod feeder year 2005 used - efficient Lodpfjwcgdnox Abnjac

Condition: used, Machine designed for inserting plastic bars into the slots of aluminium profiles. The drive system consists of four motorized rotors, preventing the bars from jamming during the insertion process. The AS 242 L thermal break profile bar insertion device has been designed to efficiently insert plastic bars into aluminium thermal break profiles, ensuring smooth flow, precise alignment, and reduced cycle times. Laedpfx Ajy Idxmebnjc No. 2 motors, 0.75 kW – 400 V – 50 Hz Operating pressure: 7 bar Bar feed speed: 100 m/min Bar guide travel: transverse 7 – 256 mm, vertical 0.5 – 140 mm Working capacity (bar height): Minimum 10 mm – Maximum 60 mm Automatic ejection of the bar tail Push-button for partial insertion of the bars into the lower profile The transverse adjustment of the bar guide is carried out via a single control equipped with a decimal position indicator. The vertical adjustment of the bar guide is carried out via two independent controls, each equipped with a decimal position indicator. Bar stop can be excluded via push-button control Machine dimensions: 1020 mm (width) x 825 mm (depth) x 1400 mm (height) Machine weight: 235 kg

Condition: used, 2 clamping plates, 1 pair of clamping rails with T-slots Clamping block, press table, auxiliary table with T-slots Length per clamping rail: 900 mm Width per clamping rail: 295 mm Thickness per clamping rail: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All sides machined surfaces Net weight per clamping rail: 240 kg Ledpfxjxf Uwlj Abneac Net weight of both clamping rails: 480 kg Good condition