Used Dimter for sale (51)

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Bjdpfx Agow Sy T Holscu

Year of construction: 2005, condition: ready for operation (used), This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine. Additional equipment • Includes approx. 70 cutter heads Z4 • Several hundred new serrated-back knife blanks Machine Benefits Bcsdsyaihpopfx Aglou Qualitative Machine Benefits • Groove guidance and hydraulic nuts Technical Machine Benefits • Working range (wxh): 230 x 120 mm • Number of spindles: 5 • Variable feed speed: 4 – 30 m/min • Spindle power output: bottom (infeed): 4 kw / right / left: 7. 5 kw each / top: 7. 5 kw / bottom (outfeed): 4 kw

Year of construction: 1997, condition: ready for operation (used), overall weight: 10,500 kg, total height: 2,000 mm, This Grecon Dimter FDL-F 205/600/500 was manufactured in 1997. It is designed for woodworking applications, offering robust performance and reliability. Ideal for handling a variety of wood processing tasks efficiently. Contact us for more information about this machine. Additional equipment • Press (Face Press): Pressing Pressure 6 - 12 t and power consumption of 52 kW • Compressed Air Consumption: 350 NL/min for milling machine, 500 NL/min for press • Suction Volume: 10600 m³/h • The machine ensures fast transport cycles with precise alignment • Includes a hydraulic pressing system for continuous jointing • Features integrated dust extraction and suction systems Machine Benefits Technical Machine Benefits • Feeding & transport: conveyor belt with a speed of 75 m/min and power of 11 kw / feeding & transport: conveyor belt with a speed of 75 m/min and power of 11 kw / threading station max feed speed: 120 m/min, power consumption 22 kw • Workpiece dimensions: length: 150 - 2000 mm / width: 50 - 205 mm / height: 35 - 50 mm 60 / final length: 3000 - 00 mm • Milling machine: turbo milling combination with power consumption of 63 kw / milling spindle motor: 22 kw, 3000 rpm / chipper motor: 55 kw, 2880 rpm Dimensions Bedpfxeyabawj Agljcu Machine Depth 18500 mm

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, Hydraulic finger jointing press (Keilzinkpresse), cycle press for finger joint connections, pressing force 10 t. For wood width 80–300 mm and thickness 18–80 mm. OPTIONAL: with 300 l hydraulic unit and 5.5 kW motor, manufacturer GOD, with electrical installation. Bcedpfjt Sc Swox Agleu

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, ### Weinig Dimter OptiCut 350 – Optimizing cross-cut saw The Weinig Dimter OptiCut 350 is a high-performance Optimizing cross-cut saw widely used in the woodworking industry for precise cut-to-size operations with simultaneous material optimization. This machine ensures high-speed, accurate cutting, maximizing raw material efficiency while minimizing waste. Year of manufacture: 2005 Technical condition: Very good --- Technical Specifications: 1. Input material length: - Maximum length: 6,200 mm - Minimum length: 500 mm 2. Material width: - Maximum width: 300 mm - Minimum width: 40 mm 3. Material thickness: - Maximum thickness: 100 mm - Minimum thickness: 15 mm 4. Cutting speed: - Maximum cutting speed: 250-350 cuts per minute - Feed speed: up to 200 m/min 5. Cutting tool: - Saw blade rotational speed: approx. 3,000 RPM 6. Control system: - CNC control with an advanced PLC system for precise cutting process management. - Optimization data input to maximize material utilization and minimize waste. - Touchscreen interface for easy machine operation and parameter input. 7. Optimization system: - Equipped with a defect recognition system (manual or automatic defect marking) to eliminate defective sections during cutting. - Length optimization function based on production requirements (e.g., minimizing waste, maximizing output of specific lengths). 8. Material feeding system: - Automatic feeding system for seamless material input. - Integrated conveyors and transport systems for efficient material flow through the machine. 9. Waste management: - Automated waste removal and sorting system to separate defective wood fragments. - Number of ejectors: 9 unit 10. Cutting accuracy: - High precision cutting with an accuracy of ± 0.5 mm, depending on wood parameters and machine settings. 11. Power supply: - Standard power supply: 400 V, 50 Hz --- ### Additional Features: - Automatic defect marking: The operator can mark defects on the wood (e.g., knots, cracks), and the machine automatically optimizes the cutting process to avoid these sections. - Safety features: Equipped with modern safety systems, including lock sensors and protective covers. --- Applications: Bcedpfev Dm U Rsx Aglsu The Weinig Dimter OptiCut 350 is ideal for woodworking industries, especially in facilities producing structural wooden components, furniture parts, and solid wood processing plants. Thanks to its optimization capabilities, this machine significantly increases productivity and efficiency while reducing material waste.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Wood finger-jointing line Weinig Grecon ProfiJoint Year of manufacture: 2013 Technical condition: very good Technical data: Working width: 40–150 mm Working height: 18–50 mm Working length: 6100 mm Milling unit: Infeed material length: 150–700 mm Material width: 40–150 mm Material thickness: 18–50 mm Jointing options: horizontal and vertical joints Milling spindle power: 18 kW Scoring cutters Hydraulic end press Grecon PJ7/6100: Bjdpfx Aeyf N Sljglscu Maximum finished element length: 6100 mm Saw blade diameter: 350 mm Cutting unit power: 2.2 kW The machine underwent a complete overhaul and modifications in 2022 and operates in automatic mode. Only one operator is required for operation. Installation, commissioning and operator training available at an additional cost.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Wood finger-jointing line Weinig Grecon ProfiJoint Year of manufacture: 2013 Technical condition: very good Technical data: Working width: 40–150 mm Working height: 18–50 mm Bodpfx Agsyf N Itsljcu Working length: 6100 mm Milling unit: Infeed material length: 150–700 mm Material width: 40–150 mm Material thickness: 18–50 mm Jointing options: horizontal and vertical joints Milling spindle power: 15 kW Hydraulic end press Grecon PJ7/6100: Maximum finished element length: 6100 mm Saw blade diameter: 350 mm Cutting unit power: 2.2 kW Installation, commissioning and operator training available at an additional cost.

Condition: used, Year of construction: 1999, functionality: fully functional, mount diameter: 50 mm, type of input current: three-phase, tool diameter: 50 mm, tool length: 330 mm, input frequency: 50 Hz, Tool presetting device WEINIG Opticontrol Swing diameter: 0 - 300 mm Tool length: 0 - 330 mm Shank diameter: 50 mm Bcsdpfx Agoxwnvrslsu

Year of construction: 1998, condition: ready for operation (used), spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, This Weinig Unicontrol 10-5 was manufactured in 1998. A robust used window manufacturing machine, it features a working width of 40-220 mm and motor powers up to 15 kW for various machining units. It includes advanced features like a synchronization device, electronic height adjustment, and an automatic turning system for efficient one-man operation. If you are looking to get high-quality milling capabilities, consider the Weinig Unicontrol 10-5 machine we have for sale. Contact us for more information. • Capacities • Working width: 40–220 mm • Working height (longitudinal machining): 40–100 mm • Working height (cross machining): 40–100 mm (counter wood height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter • Feed (cross machining) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 clamping claws • Length stop: with scale and reading magnifier for frame or sash outer dimensions • Counter: pneumatically clocked, 4 positions (not for studio windows), up to wood height max. 80 mm • Double part package: single or double part feeding, with cross separation and retention system • 1st piece (lying on the stop) wood width: 55–90 mm • 2nd piece wood width: 130 mm • Feed (longitudinal machining) • Motor power: 2.2 kW Bjdpfex S Sk Ejx Agljcu • Feed speed: 4–18 m/min (infinitely variable via frequency converter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Machining units • Crosscut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool swing: max. 400 mm • Axial adjustment: pneumatic against 4-fold turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool swing: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tools: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero swing circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For crosscut saw and profiling/sawing units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 210 mm • Tool clamping length: 160 mm • Axial adjustment range: 90 mm • Radial adjustment range: 100 mm • Length tenoning and slotting spindle (640 mm tool clamping length, instead of 320 mm spindle) • Motor power: 15 kW • Spindle speed: 2925 rpm • Number of tool positions: 8 x 80 mm

Condition: used, Milling spindle Milling spindles for finger joint cutters Finger jointing machine Bcsdpfx Aeqwgrpoglju various lengths various models In stock at www.joema-shop.com Manufacturers: GreCon, Sauter, DIMTER

Condition: excellent (used), functionality: fully functional, Grecon Dimter OptiCut 304R Optimizing Cross-Cut Saw Minimum input wood length: 500 mm with loading onto support table Minimum input wood length: 900 mm with loading via cross chain conveyor Bodpfx Agox Up Nqjlscu Maximum input wood length: 6300 mm Wood width min./max.: 40-200 mm Wood thickness min./max.: 15-80 mm Maximum wood cross-sections: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Saw blade diameter: 400 x 30 mm Saw blade rotational speed: 4200 rpm Maximum feed rate: 230 m/min Cutting modes: - Fixed length cutting - Lumber length optimization for maximum yield - Defect removal with chalk defect marking

Condition: repair required (used), functionality: not functional, Dimter HK 400 finger-jointing line Finger-jointing plant for timber packages Wood input lengths: 800-6000 mm Milling height: 285 mm (300 mm) Colour: blue Needs repair, sold as is in its current condition Bsdpovi Hw Njfx Aglscu The plant has already been dismantled and is stored in the warehouse in Achern A lot of material for little money All technical documentation available We will also provide technical support and answer all your questions.

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm over 1 application roller - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 spare parts dimter in stock equipment in stock accessories in stock Bsdpfx Ascht Nyoglscu

Condition: used, Year of construction: 2004, Automatic optimization cross-cut saw (push-type saw) Dimter type OptiCut 700 for cross-cutting wide timbers according to defects (fluorescent chalk) and lengths. Without vacuum lifter. Bcedpfex Eblvsx Agleu cutting height: Max. 120 mm cutting width: max. 700 mm input length: max. 5,300 mm

Condition: ready for operation (used), Year of construction: 2003, This DIMTER S50 Opticut was manufactured in 2003. A robust optimizing cross-cut saw, it features a processing length of 5 m and a saw blade diameter of 500 mm. A new Movidrive converter was installed in 2018, enhancing its performance. If you are looking to get high-quality cutting capabilities, consider the DIMTER S50 Opticut machine we have for sale. Contact us for more information about this machine. Bcodpfjx D Hxrjx Agleu Application Types Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine. Bedpfx Ajx D I Nreglscu Application Types Pressing / Laminating

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Cycle press for finger joints Finger joint press Bcjdpot Sc T Iefx Aglju Pressing force 10 t Wood width 80-300 mm Wood thickness 18-80 mm OPTIONAL with hydraulic unit

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 6305/7, pressing force: 15 t, working height: 905 mm, total length: 1,900 mm, pressing force 15 t line consisting of : feed rollers with servo drive press 15 t inclusive hydraulic unit feed rollers with servo drive saw >>without electrical equipment Bcsdpfx Agjg T Spaolsu

Condition: new, Year of construction: 2023, Application combs 15 mm Application combs 20 mm finger joint profile 15 mm finger joint profile 20 mm Bcsdpfx Agjiacbpelsu delivery time 3 days

Condition: like new (used), spare parts + accessories Rex + Kupfermühle + GreCon + Dimter + Cook Bolinders various in stock Kupfermühle Rex Bjdslifbdjpfx Agljcu Dimter Grecon Cook Bolinders

Condition: used, Year of construction: 2001, Electrical cabinet for Dimter OptiCut 602R Electrical schematics available Bjdpfx Aoxp Uxwsgljcu Parts list available

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrical system new Siemens S7 control Completion upon order Cross-cut saw with chalk line detection Wood cross-sections 430x30 / 300x150 / 200x200 mm DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW Bsdpfx Aov Diy Ajgljcu SEW servo drive 11.00 kW with inverter

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Bcodpev T Aqyjfx Aglou Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: good (used), Year of construction: 1998, Optimizer GreCon Dimter OPTICUT 204 R - year of production 1998 - full optimization - cutting to a dash - width measurement - possibility of cutting aluminum TECHNICAL PARAMETERS: - max. cutting length 4,000 mm - min. element 200 mm - max. cutting height 100 mm - max. cutting width 260 mm - disc diameter 500 mm - engine power 9 kW - feed speed max. 160 m / min - acceleration 2 m / s2 - optimization in terms of length and value - pneumatic pressure of the material - three ejectors - dump tables - Rotary table - total length of 2000 cm Transport dimensions: - length 1300 cm - width 245 cm Bsdsh Hfknjpfx Aglocu - height 220 cm - weight 3500 kg

Condition: excellent (used), Year of construction: 2005, Weinig Dimter OptiCut S 90 optimizer with 2 ejectors – after technical review – German production – year of manufacture 2005 Bcsdpsi Apgmefx Aglsu TECHNICAL PARAMETERS: max. length of cut material 4500 mm max. width 360mm max. height 160mm automatic length measurement optimization in 4 quality classes total power 13 kW blade motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500mm OptiCom Assist control receiving conveyor 5600 mm two ejectors total length 13 m component marking printer cutting accuracy +/- 0.5 mm transport dimensions (length / width / height) 600 / 240 / 190 cm weight ~ 1800 kg