Used Dimter for sale (55)

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Gedpeypvdijfx Aa Ajir Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Grecon Ultra microstrip line - German production - year of production 2001 - for soft and hard wood - DTR TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm width of elements min/max 40/205 mm height min/max 20x80 ratio min length / max width 2:1 initial length min/max 3000/6100 mm power of disc engine 5,5 kW blade spindle diameter 30 mm milling cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min nozzle diameter 250 and 100 mm extraction demand 6150 m3/h 30m/s Giedpfx Aaerf Ty So Ajr transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Condition: repair required (used), functionality: not functional, Finger-jointing line Dimter HK 400 for only fifteen thousand seven hundred EUR. Finger-jointing plant for timber packages. Wood input lengths: 800 - 6000 mm. Milling height: 285 mm (optionally 300 mm). Colour: blue. Requires repair, sold as-is in its current condition. The plant has already been disassembled and is stored at the warehouse in Achern. Lots of material for little money. All technical documentation available. We will also provide you with technical support and answer all your questions. Gedpfx Aaevi Hw Ne Aeir

Condition: like new (used), functionality: fully functional, operating hours: 5 h, Hydraulic cylinders in various sizes in stock. More available upon request or also in the jöma shop. These black-painted units were in operation for a maximum of 1–5 hours on a prototype patent press. Gsdpfer Hnfcsx Aa Asir

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Gisdpfjyvgiaex Aa Aor Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Gsdpjv T Aqyefx Aa Asir Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Finger joint press Cycle press for finger joint connections Finger jointing press Pressing force 10 t Wood width 80 - 300 mm Wood thickness 18 - 100 mm Gsdpfx Aet Sc T Iea Ajir OPTIONAL with hydraulic unit

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 6305/7, pressing force: 15 t, working height: 905 mm, total length: 1,900 mm, pressing force 15 t line consisting of : feed rollers with servo drive press 15 t inclusive hydraulic unit feed rollers with servo drive saw Gedpfx Aaog T Spao Asir >>without electrical equipment

Condition: ready for operation (used), Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm. Gisdpfsm Habdex Aa Aer

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Condition: used Gjdpewtgcxsfx Aa Aeir

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Gisdpfsw Uf Tksx Aa Ajr Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: used, Year of construction: 1999, functionality: fully functional, mount diameter: 50 mm, type of input current: three-phase, tool diameter: 50 mm, tool length: 330 mm, input frequency: 50 Hz, Tool presetting device WEINIG Opticontrol Gsdpfexwnvrsx Aa Aoir Swing diameter: 0 - 300 mm Tool length: 0 - 330 mm Shank diameter: 50 mm

Condition: used, Milling spindle Milling spindles for finger joint cutters Finger jointing machine various lengths various models In stock at www.joema-shop.com Gisdpfoqwgrpex Aa Aer Manufacturers: GreCon, Sauter, DIMTER

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm over 1 application roller - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 Godpfscht Nysx Aa Asir spare parts dimter in stock equipment in stock accessories in stock

Condition: good (used), Year of construction: 1998, Optimizer GreCon Dimter OPTICUT 204 R - year of production 1998 - full optimization - cutting to a dash - width measurement - possibility of cutting aluminum Gedpfjh Hfknjx Aa Ajir TECHNICAL PARAMETERS: - max. cutting length 4,000 mm - min. element 200 mm - max. cutting height 100 mm - max. cutting width 260 mm - disc diameter 500 mm - engine power 9 kW - feed speed max. 160 m / min - acceleration 2 m / s2 - optimization in terms of length and value - pneumatic pressure of the material - three ejectors - dump tables - Rotary table - total length of 2000 cm Transport dimensions: - length 1300 cm - width 245 cm - height 220 cm - weight 3500 kg

Condition: excellent (used), Year of construction: 2005, Weinig Dimter OptiCut S 90 optimizer with 2 ejectors – after technical review – German production – year of manufacture 2005 TECHNICAL PARAMETERS: max. length of cut material 4500 mm max. width 360mm max. height 160mm automatic length measurement optimization in 4 quality classes total power 13 kW blade motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500mm OptiCom Assist control receiving conveyor 5600 mm two ejectors total length 13 m component marking printer Gsdei Apgmopfx Aa Aoir cutting accuracy +/- 0.5 mm transport dimensions (length / width / height) 600 / 240 / 190 cm weight ~ 1800 kg

Condition: like new (used), spare parts + accessories Giedpfx Aslifbdea Aer Rex + Kupfermühle + GreCon + Dimter + Cook Bolinders various in stock Kupfermühle Rex Dimter Grecon Cook Bolinders

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrical system new Siemens S7 control Completion upon order Cross-cut saw with chalk line detection Wood cross-sections 430x30 / 300x150 / 200x200 mm Gijdev Diy Aspfx Aa Aor DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible Gisdpfx Aaju Atmuo Aer To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Type: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cut saw line with 1 x OptiCut 450 Gjdpswya Syofx Aa Aeir and F 100 feeding system with LuxScan CombiScan+ C 200 and curvature measurement The line was in operation until 2024, has been professionally dismantled and can be viewed.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2301.14, Sawn timber length cross cut line, timber width 20 - 300 mm, height 10 -100 mm Giodpfew Rr Dbjx Aa Asr

Condition: good (used), Paddle ejector for sorting belt Length: approx. 600 mm Gedjqmizdjpfx Aa Ajir Working height: 850 mm Drive: Rexroth servo more available also other length

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture crosscut saw control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Gjdpsncc Icsfx Aa Aoir Machine ran without problems until dismantling Transport can be organized

Condition: good (used), reciprocating cross-cut saw For cutting glue laminated beams to length machine length 2200 mm Machine width 1200 mm Gjdpfx Aajg E Iqfo Asir working height 850 mm without control

Condition: good (used), Sorting plant, sorting conveyor belt, sorting behind an optimizing saw. Conveyor belt length: approx. 8,000 mm conveyor belt width: approx. 250 mm working height: without feet Giodpfeg Ufnxox Aa Ajr Drive: without motor 5 pcs. pneumatic buffers Belt is disassembled, because of transport, cables and hoses have to be made new.