Used Disc Separator for sale (13,494)

Condition: like new (used), Year of construction: 2007, operating hours: 3,892 h, functionality: fully functional, total width: 2,550 mm, total length: 10,000 mm, total height: 4,000 mm, overall weight: 6,500 kg, fuel: diesel, type of input current: three-phase, input voltage: 400 V, Komptech Hurrikan - Air separator Diesel engine and electric motor Engine power: 53 kVA Voltage: 400V, 63A Chassis: Single-axle trailer Weight: 6.5 tons Operating hours: 3892 hours Djdpfx Aho Aarqiehskw Machine has undergone a complete overhaul.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Djdjzvlm Espfx Ahhokw Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE Dedpfxey N Rlvj Ahhjkw The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: used, Year of construction: 2006, functionality: fully functional, total length: 6,150 mm, total width: 2,470 mm, total height: 2,065 mm, overall weight: 13,000 kg, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, # STADLER STT 5000 Ballistic Separator – Year of Manufacture 2006 – Shafts Renewed in 2025 For sale is a regularly maintained and well-preserved ballistic separator from the manufacturer STADLER, type STT 5000, year of manufacture 2006, from our existing commercial waste sorting plant. The machine was used for the mechanical separation of various waste and recyclable material fractions and was permanently integrated into our stationary sorting line. ### Technical Data - Manufacturer: STADLER - Type: STT 5000 - Year of Manufacture: 2006 - Overall Length: approx. 6,150 mm - Overall Width incl. Motor: approx. 2,470 mm - Overall Height: approx. 2,065 mm - Overall Weight: approx. 13,000 kg - Number of Paddles: 6 - Paddle Length: 5,050 mm - Motor Power: 11 kW - Design Capacity: 12 t/h - Design Volumetric Flow: 80 m³/h ### Maintenance and Repair The ballistic separator was regularly and carefully maintained throughout its service life. Necessary repairs and the replacement of wear parts were carried out continuously. Major maintenance measures: - December 2025: All shafts of the ballistic separator were completely renewed. The investment costs amounted to approximately €80,000. A corresponding invoice is available. - 2024: All paddles were renewed. The machine is equipped with paddle coverings made of sheet metal. - Regular maintenance: The screen segments with a grain size of 50 mm are regularly replaced. These extensive measures ensured continuous investment in the maintenance and preservation of the machine. Corresponding invoices and maintenance records can be provided upon request. ### Sale Due to Plant Modernization Dkodps Ahpa Ejfx Ahhsw The sale is due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible by prior appointment. ### Dismantling and Loading We will personally assist the buyer on-site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation and records of the maintenance work carried out can be provided upon request. Price on request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Dsdjvyuy Hepfx Ahhekw Magnet power 2,2 kW; Material flow rate 1.8 m/s; Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Condition: used, Year of construction: 1978, el. cabinet. Documents are available. Capacity: app. 15-20.000 ltr/h Suitable for wine, beer Djdpfx Ae Ahluqshhskw

Condition: excellent (used), Year of construction: 2014, Bone Separator Make: Baader Model: 601 Rated at upto 800kg raw material per hr Built 2014 Little use 5mm drum Dkjdo Ah Sl Eopfx Ahhow Ex fish factory

Year of construction: 2021, condition: like new (used), We are offering a Senro optical sorter, manufactured in 2021, for sale. The machine has been used for a limited number of hours. It consists of an infeed conveyor, which transports the product to the sorting machine. The sorting machine is equipped with an air bar containing nozzles that use air pressure to propel the product to be sorted across the bar. Dkodezw I Hdspfx Ahhjw The hopper can be equipped with either NIR detection or visual detection. Cameras are still installed. Price negotiable; indicative price €50,000. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2014, (1) Manual sorting conveyor; R&K; Serial No.: 100008/2014; Approx. 19,664 x 10,462 x 4,035 mm; 2 x 2.2 kW; 400 V; IP 5 (1) Permanent magnet MD 1000x600x230F; Magsy; Serial No. 189; Year of Manufacture: 2014 Dkodpfx Ao Ahhkgjhhjw (1) Metal detector MN 5.2 D 1000/300; Mesutronic; Serial No.: 2016 - 1001 - D; 100-240 V; 1.25 A; 50/60 Hz; IP54 (1) Conveyors, multiple units; Procomac; 2.2 kW; 400 V; IP55 where specified Technical Details: 100-240 V; 1.25 A; 50/60 Hz; IP54

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: DLM 705, overall weight: 8,000 kg, The machine is in good overall condition. Price is negotiable after inspection. Dkodpfx Aez Aquzohhew

Condition: used, Year of construction: 2008, Control system: Beckhoff, operation: touchscreen. Equipment: extraction system, milling and sawing separation, shuttle/loading system, enclosed machining area, safety enclosure with viewing windows, emergency stop switch, start/stop push buttons, three-color signal tower, pneumatic air preparation unit, Ruwac industrial vacuum cleaner. The system is operational and was shut down at the beginning of the year. Inspection possible by arrangement. Dodpfxe Ahi Tvj Ahhokw

Condition: refurbished (used), Year of construction: 1973, functionality: fully functional, rotational speed (min.): 4,800 rpm, Separator WESTFALIA type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, for citrus and tropical fruits for pectin capacity: 300-13.000l per hour with 4,800 rpm Dimensions and weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Djdpfx Ahjtqf Dbshskw Weight: 2350 kg Technical Data: Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the centrifuged material: Heavy liquid: 1.0 kg/ dm3 Solids: 1.45 kg/ dm Test books, tools, drawings available!

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, first registration: 10/2014, total length: 8,440 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R 22.5, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes Dkedpfxs Ah Tido Ahhsw - Hydraulics - PTO - Tipping hydraulics = More information = General information Year of construction: 2014 Axle configuration Tyre size: 385/65R 22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Axle 2: Tyre profile left: 30%; Tyre profile right: 30% Axle 3: Tyre profile left: 60%; Tyre profile right: 60% Weights Empty weight: 5.500 kg Carrying capacity: 33.500 kg GVW: 39.000 kg

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2015, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 8,960 mm, color: other, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes = More information = General information Year of construction: 2015 Dkodpfx Ahe Ah Th Ijhsw Registration number: ON-19-YF Axle configuration Tyre size: 385/65 Make axles: BPW Tyre profile: 50% Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg; Steering Weights Empty weight: 8.200 kg Carrying capacity: 32.800 kg GVW: 41.000 kg Functional Tail lift: AMA, slider lift Maintenance APK (MOT): tested until 01/2027

Condition: like new (used), Year of construction: 2014, Pilot Crystallizer Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development. Including: 2 tanks, 5 liters each, for water and fat-phase ingredients. 1 buffer tank, 20 liters. High-pressure pump, up to 75 bar. 3 crystallization cylinders, named A1 + A2 + A3. 2 pin mixers, named C75 + C150. 1 rework melter, C heat. 1 resting tube, named B200. The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping. The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor. The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube. A temperature sensor is located after each unit. The capacity is variably adjustable, up to 50 liters per hour. Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser. There are 3 independent cooling circuits (for each crystallizer). The tanks are double-jacketed, with an agitator and temperature sensors. The entire unit is built on a frame and is mobile. The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems. The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves. All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss. An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump. Dodpfx Ahsz Iy Hzohjkw

Condition: like new (used), Year of construction: 2026, Cyclone separator / extraction system in a robust, welded design Dedpfx Ahjztzmvehjkw optional: rotary valve fan piping steel frame please specify the required air flow rate in m³/h when requesting a quote.

Condition: used, Year of construction: 2023, machine/vehicle number: 8102046714, Used Atlas Copco Oil-Water Separator OSC 1250 For compressors with a free air delivery (FAD) of up to 75 m³/min The OSC 1250 is used and in good condition. The scope of delivery includes 4 new filter bags (see photo). Technical Data: Flow rate (with dryers and filters): Max.: 1,250 l/sMin.: 608 l/sFlow rate Dsdpfx Aez D Udyjhhskw (without dryers and filters): Max.: 1,563 l/sMin.: 839 l/s Residual oil content at outlet: max. ≤10 mg/l Connections: Condensate inlet: 2 x ¾" Water outlet: ¾" Test connection: ¼" Dimensions: Width: 800 mm Height: 960 mm Length: 850 mm Weight: 91 kg Visit our showroom in Erlangen, Germany.With over 450 m² of exhibition space, you will find a wide selection of both used and new compressors.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2005, total length: 9,060 mm, total width: 2,520 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,450 mm, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lifting axle - Air suspension - Disc brakes = Notes = Nice 2005 Van Hool 20FT tipper chassis, SAF axles with disc brakes (Intradisc), ABS, 2 x lifting axle, ADR (EXII, EXIII, FL, AT), tiltable up to 20 degrees, 24V, unladen weight: 5,200 kg, max. weight: 39,000 kg, 385/65-R22.5 tires (L: 8/17/8mm; R: 7/10/7mm), Dutch registration = Further Information = General Information Year of construction: 2005 Registration number: OH-71-VY Axle Configuration Tire size: 385/65-R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lifting axle; Max. axle load: 9000 kg; Tire tread left: 50%; Tire tread right: 45% Rear axle 2: Lifting axle; Max. axle load: 9000 kg; Tire tread left: 100%; Tire tread right: 60% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 50%; Tire tread right: 45% Weights Unladen weight: 5,200 kg Payload: 33,800 kg GVW: 39,000 kg Functional Dodpfx Ahjvt A Hnohjkw Body brand: Van Hool 3B2013 Condition Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for further information.

Condition: excellent (used), axle configuration: 3 axles, first registration: 01/2008, total length: 13,600 mm, total width: 2,500 mm, suspension: air, tire condition: 50 %, color: other, Equipment: ABS, = Additional options and accessories = - air suspension - Disc brakes Dkodpe Aihddefx Ahhow - Wooden floor = More information = Year of construction: 2008 Tyre profile: 50% Brakes: disc brakes Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2011, total length: 9,680 mm, total width: 2,450 mm, suspension: air, wheelbase: 7,790 mm, color: black, General information Year of construction: 2011 Registration number: OL-93-KX Axle configuration Make axles: BPW Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.670 kg Carrying capacity: 35.330 kg GVW: 39.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension Dkodpfs Afpwdex Ahhow - Disc brakes - EBS - Lift axle - Twist-locks = Remarks = LAG O-3-CC 01/ Tank Chassis 20-30FT / ADR / BPW + Disc / 1x Lift Axle ADR : EX/II - EX/III - FL - OX - AT

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Dedpfx Ahopcf Etshskw Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2014, total length: 8,440 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22.5, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - Hydraulics - PTO = More information = General information Year of construction: 2014 Axle configuration Tyre size: 385/65 R22.5 Make axles: Schmitz Dkjdpfx Ahj Ah Thkohjw Brakes: disc brakes Suspension: air suspension Axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 6.300 kg Carrying capacity: 32.700 kg GVW: 39.000 kg

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Equipment: ABS, = Additional options and accessories = Dodpfx Ahj Ah Tlcehskw - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = General information Year of construction: 2014 Registration number: ON-68-FS Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027

Condition: used, axle configuration: 3 axles, first registration: 12/2003, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Equipment: ABS, = Additional options and accessories = Dsdpj Ahhgyofx Ahhjkw - ADR - Air Suspension - Disc brakes - Electrically adjustable door mirrors - Electrically operated windows - Electric mirrors = Remarks = Superstructure Volume: 27 m3 Tank capacity: 27000 liters = More information = Year of construction: 2003 Tyre size: 385/65 Make axles: SAF Tyre profile: 40% Brakes: disc brakes Suspension: air suspension

Condition: good (used), Year of construction: 2016, Manufacturer: Baader Model: 604-530 Dedpfx Ajz R Niaohhekw Year: 2016 Condition: Used Serial number: 120002207 Stock number: 3450 Drum: 10 mm Infeed height: 2400 mm Outfeed height: 900 mm Power: 3 x 400V, 50Hz, 9.3kW Dimensions: 1600 x 1650 x 2900 mm Weight: 1700 kg Machine has only 1348 operating hours. Infeed hopper with mixing arm, touch screen control. Includes drum trolley, extra 10 mm drum, extra knife, and extra squeezing belt.