Used Dmc104V Linear for sale (2,331)

Condition: like new (used), SUITABLE FOR ALL TYPES OF PRODUCTS: green peas, green beans, spinach, carrots, okra, beans, strawberries, artichokes, sweet corn, broccoli, cauliflower, mushrooms, etc. WATER CONSUMPTION: 1.5 L water per 1 KG of product. STEAM CONSUMPTION: 1.5 L steam per 4-7 KG of product. The machine can operate in three modes: with water, with steam, or as a moisturizer (hydration). Hydration Blancher Version: In this configuration, the machine is suitable for completing the rapid rehydration process of cereals or legumes pre-started with the pre-heater. - Module 1 functions to treat the product with a water spray. - Modules 2, 4, and 6 work with steam. The temperature is controlled by a probe located in module 6, which regulates the modulating valve on the steam supply line to module 6, provided the pneumatic steam shut-off valve on module 2 is open. Bwedsx S H U Sjpfx Afpjh - Modules 3 and 5 use cold atomized water. - Module 7 is designed as a water-to-air cooler. - Module 8 works with water, and its temperature does not exceed 14ºC to lower the temperature of the product. Water Blancher Version: In this configuration, the machine operates in counter-current, meaning the product moves in the opposite direction to the cooling water flow. The first seven modules are equipped with trays with rotary water recovery filters, as well as associated level controls and water recirculation pumps. - Modules 1, 2, and 3 function as pre-blanchers for the product. - Modules 4 and 5 are specifically designed for blanching with hot water. Water is recirculated by pumps, and temperature is regulated in module 4. - Module 6 acts as the first cooling module and is fitted with a by-pass pump for recirculating warm water, which is redirected to the 2nd or 3rd module; supply to the 3rd module is regulated by a solenoid valve. - Module 7 cools the product using a water mist and removes humid air with a fan. - Finally, module 8 further cools the product by spraying water above and below the conveyor net, with all water collected in module 8’s recovery tank. Steam Blancher Version: In this variant, the machine can steam-blanch vegetables across eight modules: - Module 1 serves as a barrier to prevent steam loss. - Modules 2, 3, 4, 5, and 6 operate on steam. The temperature is maintained by a probe in module 6, controlling the modulating valve on the steam supply line, provided the pneumatic steam shut-off valves are open. - Module 7 is designed for WATER-AIR cooling. - Module 8 is water-cooled, with the temperature not exceeding 14ºC to rapidly reduce the product temperature.

Condition: good (used), Linear drive, linear gearbox, lifting gear, transfer rail, conveyor rail -Linear drive: with toothed belt -Stroke: 2480mm -Drive shaft: hollow shaft Ø 14 mm -Note: without motor, can be included for an additional charge -Transport dimensions: 2800/150/H135 mm -Weight: 24kg Bodpfjii Sdzox Afpswh

Condition: used, Year of construction: 2006, operating hours: 37,654 h, functionality: fully functional, machine/vehicle number: 10915548924, spindle speed (max.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 50 eVo linear universal machining centre, year of manufacture 2006. The guides of the X, Y, and Z axes, as well as the ball screws, were completely replaced at the end of 2023. Geometrically, the machine is currently as good as new. If you have any questions or need further information, please feel free to send us a message or give us a call. Bwsdpfx Ajx Srp Ujfpjh

Condition: excellent (used), Linear drive, linear gearbox, lifting gearbox, spindle drive Bwedpfxsb A Iw Re Afpoh -Condition: unused, from warehouse clearance -Manufacturer: Festo -Type: DGP - 40 - 730 PPV - A - B -161782 W208 -P: max. 8 bar -Number: 3 drives available Price: per piece -Weight: 7 kg/piece

Condition: excellent (used), linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive -Manufacturer: Geze, spindle drive type E250/24V-DC EV 1 Ovp -Ident.-No.: 16 473 -Stroke length: 300 mm -Network: 24 V DC -Shaft: Ø 20 mm -Number: 2x linear drive available -Price: per piece Bwodpfxsvu Rvte Afpeh -Dimensions box: 670/60/H45 mm -Weight: 1.8 kg/piece

Condition: used, Truck dimensions (pallets): From 1 to 4) 140x110 h.120 Kg. 600 5) 140x130 h.40 Kg. 100 6) 150x100 h.90 Kg. 300 7) 320x100 h.120 Kg. 800 8) 320x90 h.80 Kg. 300 Inventory of parts: No. 69 pieces of 3 meters (total 207 meters) No. 1 piece of 2.80 meters No. 13 pieces of 3 meters (total 39 meters) No. 6 pieces of 1.80 meters (total 16.8 meters) nr. 2 pieces of 2.40 meters (total 4.8 meters) Bodpfjx Tuu Nsx Afpowh No. 1 piece of 1.50 meters nr. 2 pieces of 0.70 meters (total 1.4 meters) nr. 2 pieces of 1 meter (total 2 meters) No. 1 piece of 1.50 meters No. 17 curves of 1.20 linear meters (total 20.4 linear meters) with a pitch (diameter) of 1.15 meters No. 6 curves of 0.3 meters (total 1.8 meters) No. 1 trailer with 1.50 meter track

Condition: excellent (used), Linear drive, linear gear, screw jack, spindle drive -unused: from warehouse liquidation -Linear drives: with toothed belt -unused: from warehouse liquidation -ravel: 1230 mm -without motor -Dimensions: 500/550/H1900 mm -Number: 5x linear drives available -Price: per piece Bwsdpfeb A Htljx Afpeh

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g Bodpfx Aowymlysfpswh - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Year of construction: 2006, operating hours: 29,689 h, condition: ready for operation (used), General Data Measurements width 1553 mm Measurements depth 3890 mm Measurements height 1890mm Machine weight 3500 kg Control Unit Brand FANUC Bwjdpsx D Igksfx Afpeh Model 180i Main Drive Spindle speed range 5000 rpm Number of axis 2 Movement X-Axis Movement 210mm Z-Axis Movement 450mm Turret Number of turrets 1 Tools Number of index 12 This DMG Gildemeister CTX 320 linear was manufactured in 2006. A reliable horizontal turning machine, it offers robust performance for precision machining. Consider the opportunity to buy this DMG Gildemeister CTX 320 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Bodpswyvc Usfx Afpjwh Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Footprint: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret

Condition: ready for operation (used), Year of construction: 2017, operating hours: 29,532 h, General Data Machine weight 27750 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 10000 Tool taper ISO 50 Number of axis 5 Movement Bwsdox D R A Uspfx Afpsh X-Axis Movement 2600 mm Y-Axis Movement 1100 mm Z-Axis Movement 900 mm Table Table load 4000 kg This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Linear bearings, guide carriages -Condition: unused -Type: SHS25C1SSC1(GK) Block Bwsdpfx Aeb A Spnofpeh -Number: 2x linear bearings available Price: per piece -Weight: 0.8 kg/piece

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,400 mm, table length: 2,800 mm, table width: 3,100 mm, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece weight (max.): 52,000 kg, spindle nose: HSK 63A, controller manufacturer: Heidenhain, controller model: 640, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Gantry Milling Machine PARPAS Model DIAMOND LINEAR 30 Numerical control Heidenhain 640 Cross travel (X): 2,600 mm Longitudinal travel (Y): 3,000 mm Vertical travel (Z): 1,400 mm Feed rates: 60,000 mm/min Continuous orthogonal head (TOE29T) C axis: +/- 370° A axis: +/- 110° Tool holder: HSK-63A Spindle speed: 20,000 rpm Spindle power: 37 kW Table: 3,100 x 2,800 mm Bwodpfx Aswzv Umofpeh Load capacity: 6 t/m² Tool magazine: 60 positions Equipped with: - 2 chip conveyors - HR550FS handwheel USED MACHINE YEAR 2021

Condition: new, functionality: fully functional, Year of construction: 2025, Chain excavator WOODGRAIN GF-1500 max 12/15KM EXCAVATION DIMENSIONS 600 X 100 MM The WOODGRAIN GF-1500 chain excavator is a professional machine designed for excavating for cables, pipes, irrigation, digging trenches for water installations or irrigation systems. Thanks to its precision, speed, dimensions, it will easily perform excavations near fences or other objects, in hard-to-reach places even with very hard ground! Only one person is required for operation. Machine Specification CE Certificate, DTR: YES Engine Capacity: 420cc Fuel: Petrol Efficiency: 60m/h Digging Width: 100mm Digging Depth: 150,300,450,600mm Teeth: 27 carbide teeth Chain Length: 2000mm Chain Speed(Max): 550m/min Tire: 145/7.0-6 Height: 1100mm Length: 2100mm Width: 720mm Gross Weight: 188 kg Engine technology: 4-stroke, Single cylinder, air-cooled, OHV (overhead valve) Displacement (cm3): 420 Cylinder: Cast iron sleeve Cylinder diameter (mm): 90.0 Stroke (mm): 66.0 max 3600 rpm Fuel tank capacity (l): 6.6 Oil system capacity (l): 1.1 Dry engine weight (kg): 31.0 Dimensions: length (mm): 499 Dimensions: width (mm): 370 Dimensions: height (mm): 443 Bwedpfx Afevzqk Rjpjh Max engine power (EPS*): 15 HP *EFFECTIVE POWER SOLUTIONS Engine Features: OHV Technology - optimal performance guaranteeing longer engine life and greater fuel savings. Lo-Tone PRO Muffler - Lowest audible sound level (significantly lower DB) TWO air filters - no airborne contaminants into the engine (protection) Speed ​​control - regulates speed to provide more usable power in difficult conditions. Cast iron sleeve - reinforcement and durability, providing resistance to wear and overuse while improving oil control. Double ball bearings - provides additional durability and extends engine life. Float carburetor - the right amount of fuel, which improves engine start-up along with fuel economy High torque - more power, higher efficiency! Protective cover against ejection of excavation spoil

Condition: excellent (used), Year of construction: 2006, Universal 5 axis Machine Center ---Good working Conditions ---- DMG DMF 250 Linear Year Mfg 2006 Heidenhain iTNC530 control Travel X2,500 Y920 Z820mm NC Rotary Chuck _ Hoffmann (A axis) NC B axis -105 ~ 105 degree (Spindle Head) NC C axis 360 degree ATC 30 magazine Spindle 18,000rpm Spindle Taper BT40 Direct Measuring X,Y & Z axis Bodox Nmllspfx Afpowh

Year of construction: 2002, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Powerline Main Drive Number of axis 4 Tools Type of tool holder VDI 40 Media Chip conveyor Yes Additional Equipment PCU 50 Y-axis KSA pump Hollow clamping cylinder 65 mm Counter spindle with ejector cylinder Parts catcher Discharge conveyor Sauter star turret with angled tools Preparation bar loader This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information. Application Types Turning Bwodpfsx D R Hgjx Afpsh

Condition: ready for operation (used), Year of construction: 2013, operating hours: 8,185 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 5 Spindle Speed 18000 RPM Tool taper HSK 63 Movement X-Axis Movement 600 mm Bwodpfxjx D Dyas Afpeh Z-Axis Movement 500 mm Y-Axis Movement 500 mm This 5-axis DMG DMU 60 evo Linear was manufactured in 2013 and features a travel range of 600/500/500 mm, a spindle speed up to 18,000 rpm, and a tool magazine with 60 positions. It includes a Heidenhain iTNC 530 control, internal coolant at 40 bar, and a scrap belt chip conveyor. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5600x1000x1550 mm Weight 2500 kg Total power requirement 6,5 kw Bsdpfx Afovz E E Aspowh

Condition: excellent (used), Straight edge for mechanical engineering, length 4000 mm Bwedpfx Afex Rtvajpsh

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 6800 kg Bedpfx Afox H Uziepswh Control Unit Brand SIEMENS Main Drive Number of axis 3 Movement X-Axis Movement 640 mm Z-Axis Movement 500 mm Y-Axis Movement 600 mm This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2002. It features a 640 mm X-axis, 600 mm Y-axis, and 500 mm Z-axis. The table size is 850 x 600 mm, equipped with a 30-tool magazine and SK40 taper. It operates with a Siemens control system and weighs 6,800 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 64 V linear machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2018, condition: excellent (used), bestehend aus zwei Stück Zahnriemenachsen EGC-80-1300-BS-10P-KF-0H-ML-GK und vier Stück Linearführungsschienen HGR 20C 1705V9-10A00 mit HIWIM Linearblock HGW CCC 170 3W3-10200 Zwei Unimotore 075E3C300BACAA075140 mit Zwei EMERSON UNIDRIVE M 701-3200050A Bwodpfxog Ixums Afpsh

Condition: used, pneumatischer Linearantrieb nutzlänge 625 mm Bwodpohkr Dtsfx Afpjh

Condition: excellent (used), Easiweigh Ace 2V Linear weigher Serial: 991278 Bwsdpfx Ajulzzqofpsh Stainless, single head linear weigher, with foot pedal, 1Ph

Condition: good (used), functionality: fully functional, machine/vehicle number: 142005, input voltage: 400 V, DGUV certified until: 12/2026, overall weight: 300 kg, total width: 700 mm, total length: 750 mm, input frequency: 50 Hz, input current: 10 A, electrical fuse: 16 A, Spiral Mixer – Dough Machine Erka Model: HK 30 for approx.: max. 30 kg dough Bwjdpewmvx Asfx Afpeh 2 speeds Machine is mobile Connection: 400V, 16A-CEE plug Used machine We have more spiral mixers in stock!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2025, input voltage: 400 V, DGUV certified until: 12/2026, overall weight: 400 kg, total width: 1,050 mm, total length: 1,050 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, TOP lifting kneader Diosna Model: S 120 Plus Dough mixer for up to 120 kg dough Stainless steel bowl and kneading arm Flour dust cover 2 speeds, timer Bwodswmwmbjpfx Afpeh Robust technology Connection: 400V, 16A-CEE plug Refurbished used machine with warranty Option: Maintenance contract Service package Delivery service Instruction & commissioning Large selection of lifting kneaders – only available from us!