Used Dmu 200 P for sale (188)

Condition: ready for operation (used), Deckel Maho Lasersoft 3D control panel, used, in good condition, 100% operational, scope of delivery as shown in the photos. Dedpfx Anjx Eq E Ijwscg

Condition: good (used), Year of construction: 1995, Universal tool milling machine cover FP 1 several machines see pictures Dodpfxstdcfhs Anwscg Type : FP 1 3-axis digital readout Heidenhain Price : from 9.500€ excl. VAT Technical data: x-path: 300 mm y-path: 150 mm z-path: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed steps work spindle: 8 Feed range: 10 - 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle holder: SK 40 ... Dimensions/weight: 1235x1160x1800 / approx. 800kg

Condition: repair required (used), Year of construction: 2005, machine/vehicle number: 2731660/C 0000, functionality: not functional, operating hours: 44,050 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z 600/400/425mm Speed range 20 to 18,000 1/min AC main drive 35/25 kW (40/100% ED) 3D path control SINUMERIK 840D powerline Tool change/ 25 magazine positions HSK-A 63 tool holder Shuttle table Clamping surface 2x660x400 mm Infrared measuring probe Heidenhain TS 641 Internal cooling lubricant supply (IKZ) 40bar / 23l/min / 600L container Scraper belt conveyor discharge height 1000mm incl. coolant tank 200L Gravity paper belt filter Rotating viewing window Oil and emulsion mist separator with mechanical filter Work area flushing - chip flushing Flow rate: 100l/min Pressure: 1bar Dcsdpfxerl Rwxs Anwjg Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D Machine is sold as in need of repair. There is a defect in the sensor for the tool changer (position detection). Please send technical questions in writing. >>> Commercial sale

Condition: excellent (used), Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced Dedpfx Aowglnyonwocg The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Spindle speed: 20 - 12,000 rpm tool magazine: 60 seats Turntable diameter: 630 mm Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Belt filter system: Belt filter system

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA Dcsdey Emufepfx Anweg weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: ready for operation (used), Year of construction: 2001, operating hours: 35,241 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, overall weight: 9,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis DECKEL MAHO DMC 100 V was manufactured in 2001. It features impressive travels of approximately 1000 mm in the X-axis, 800 mm in the Y-axis, and 500 mm in the Z-axis. The machine boasts a maximum spindle speed of around 18,000 rpm and includes a KNOLL chip conveyor and coolant filter system. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 100 V vertical machining centre we have for sale. Contact us for further details. • Control: 1 DECKEL MAHO control unit • Operating hours: 35,241 Additional equipment Dsdpfx Aeyw N A Nenwjcg • KNOLL 450 K-1/40 chip conveyor (2002) • KNOLL RF 200/1100 coolant filter system (2001)

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, CNC controller: HEIDENHAIN iTNC530 X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 Dcedpsyv H I Hjfx Anweg C-axis degrees: 360° (0,001°) A-axis degrees: +10° -110° Worktable Table dimensions mm: 400x400 Max. workpiece weight kg: 200 Spindle speed rpm: 42.000 Tool holder: HSK-E50 Tool magazine slots: 60 Electronic Handwheel Infrared probe blowing air through spindle center selectable via M-function Signal lamp NC swivel rotary table 3D quickSET 20-position pallet tower storage and transfer station

Condition: ready for operation (used), DMU 50V Dcedsyyqu Sopfx Anwsg XYZ 500x380x380 Motor 15 kW 15000 RPM Table 800x480 24 tools Dimensions 2450x1800x2384 mm Weight 4000 kg Spindle new in 2026 Still in production

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 15,000 rpm, spindle motor power: 46,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine. • Swivel head (B-axis) • Rigid table: 3,200 x 1,100 mm (125.98 in x 43.30 in) • Rapid traverse (standard): 40 m/min (131.2 ft/min) • Acceleration (standard): 4 m/s² (13.12 ft/s²) • Tool clamping: DIN 69872 • Tool magazine: 30 tools (chain with double gripper) • Chip-to-chip time: 9 s (SK40) • Direct measuring systems • Full-protective cabin and coolant tank • S-A3070 Dynamic package for DMF 260 linear (Y 1,100 mm): • Linear drive X-axis with 80 m/min (262.48 ft/min) • Rapid traverse XYZ: 80/60/60 m/min (262.48/196.86/196.86 ft/min) • Acceleration XYZ: 5/6/6 m/s² (16.4/19.68/19.68 ft/s²) • Active chiller for main spindle and linear motor Dcjdsx D Iclopfx Anweg • Tool magazine: 30 tools (chain with double gripper) • Chip-to-chip time: 7.5 s (SK40) • Motor spindle speedMASTER SK40: • Torque: 200 Nm / 130 Nm (148 ft-lbs / 96 ft-lbs) • 40% / 100% duty cycle Additional equipment • Chip conveyor (scraper type) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Travel X/Y/Z: 1000mm/600mm/600mm, feed rate: 30m/min, rapid traverse: 30m/min, table dimensions X/Y: approx. 1200mm/600mm, max. table load: 800kg, tool stations: 24, tool holder: SK40, speed: 8000rpm. Machine dimensions X/Y/Z: approx. 3000mm/3500mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10346h, spindle hours: approx. 10346h. Includes a compact filtration system Interlit SUK 200/550, year of manufacture: 2000. The machine is equipped with a new control system. Documentation available. An on-site inspection is possible. Dedpfow Dut Hox Anwecg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2881-0191, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS DIALOG 112, spindle speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! Payment is due one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL SPECIFICATIONS Travel X-axis: 700 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Feed rate X, Y, Z: 1 - 10,000 mm/min Rapid traverse X, Y: 30 m/min Rapid traverse Z: 20 m/min Setup mode speed X, Y, Z: 1 - 2,000 mm/min Table width: 550 mm Table length: 900 mm Table load: 800 kg Max. setup height: 600 mm Distance spindle nose to table: 150 - 650 mm Max. spindle speed: 8,000 rpm Tool magazine positions: 40 Holder diameter: 40 mm Tool holder: SK 40 Max. tool diameter for standard tools: 80 mm Max. tool diameter for special tools with free adjacent slots: 140 mm Djdpjxm Ty Isfx Anwjcg Max. tool diameter for boring heads with free adjacent slots: 200 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 12 kg Control model: SIEMENS DIALOG 112 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,300 x 2,900 mm Total weight: 8,000 kg EQUIPMENT Documentation/manual Chip conveyor Note: The magnetic clamping plate shown on the table is not included in the scope of delivery.

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Djdpfx Anjt Hw Trowocg Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2012, x-travel 630 mm y-travel 800 mm z-travel 750 mm control SIN 840D sl Siemens B - axis 360 x 0,001 ° A - axis -200 -- +25 x 0,001 ° spindle turning speed - stepless 20 - 18.000 U/min power capacity at 100 % load 28,00 kW power capacity at 40 % load 34,00 KW max. torque at 40% / 100% load 110 / 84 Nm tool taper HSK 63 feed X/Y/Z/-axis 1 - 100.000 mm/min rapid traverse X/Y/Z 100,00 m/min feed capacity X/Y/Z 9 / 6 / 9 kN feed B-axis 1 - 14.400 °/min feed A-axis 1 - 7.200 °/min size of pallet 2x 500 x 500 mm workpiece weight max. 400 kg max. workpiece diameter 800 mm workpiece height max. 800 mm tool magacine with 63 diameter of tools max. 280 mm tool length - max. 550 mm weight of tools max. 15,00 kg total power requirement 65,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage control, emulsion mist separator, without chip conveyor and without coolant system. Dsdpfxsvxwxvo Anwocg