Used Dressing Device for sale (12,123)

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Lajdpfx Abjwhui Aenec Availability: Short-term Storage location: Flörsheim

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Ledpfxjwhui Ns Abneac Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim

Condition: new, mobile extraction unit exhibition piece Dimensions and weights Length (product) approx. 1000 mm Width/depth (product) approx. 500 mm Height (product) approx. 2100 mm Net weight approx. 39 kg Chip collection volume 110 l Nominal external diameter extraction inlet 203 mm Nominal external diameter extraction outlet 1 x 100, 1 x 120 mm Electrical data No-load speed 2950 min⁻¹ Connection voltage 230 V Mains frequency 50 Hz Input power 1.5 kW Output power 1.05 kW Filter Filter area 1.92 m² Noise emission Maximum sound pressure level 85.7 dB(A) Airflow Nominal airflow 1900 m³/h Maximum negative pressure 1700 Pa SCOPE OF DELIVERY Fine filter bag, Chip collection bag Availability: short-term Warehouse location: Hochheim Lajdpow I Uu Refx Abnec

Condition: used, Year of construction: 2012, used extraction unitYear of manufacture: 2012Rated capacity: 2789 m³/hFilter surface: 1.8 m²Max. negative pressure: 1668 PaChip collection volume: 160 lMotor: 1.1 kW, 400 VExtraction port: 1 x 120 mm, 1 x 100 mmAvailability: short-termLocation: Hochheim Lsdpfx Abex Rv Dtonoac

Condition: used, Multi-beam safety light curtain, 1 transmitter + 1 receiver + 2 reflectors FIESSLER 1 transmitter unit Type: ULVT / 105 S No.: 69833 Protective field height: 1500 mm Range: 24 meters Response time: 13 mS Detection capability: 30 mm Supply voltage: 24 Volt DC 1 receiver unit No.: 69832 Type: ULVT / 105 E Protective field height: 1500 mm Range: 15 to 30 meters Response time: 13 mS Detection capability: 30 mm Supply voltage: 24 Volt DC Installation cross-section: 41 x 61 mm Overall length: 1600 mm - mounted on a support column made of 80 x 80 mm aluminum system profile with a base plate - Height of support column: 2020 mm 2 mirror reflectors, type SASU 1500 column (impact protection) with mirror Protective field height: 1500 mm Installation cross-section: 90 x 87 mm Lsdpfezcf U Rjx Abnoac Overall length: 1850 mm Total height with pallet: 2180 mm Total weight with pallet: 116 kg Very good condition Ideal for presses, eccentric presses, hydraulic presses, plate shears, bending presses, or robots as a protective fence around machines such as nibbling machines or automated systems.

Condition: used, length 800 mm width 500 mm height 1000 mm weight of the machine ca. 1,1 t 2 units - Weight approx. 550 kg/each Laedpfxstv Icuo Abnoc

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: PEMA, swiveling, hydraulically height-adjustable welding rotator -Type: 1500AHM -Load capacity: 15000 N -Control: with remote control -Base plate: Ø 850 mm -Speed: 0.02 - 1.6 rpm Right/Left rotation Lajdpfszbutaex Abnoc -tiltable: hydraulically -Height adjustment: hydraulic -Transport dimensions: 850/1650/H970 mm -Weight: 820 kg

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 220 mm -Rollers: Ø 185 x 117 mm -Load capacity: kg -Dimensions each: 1070/200/H240 mm -Submission/Price: complete -Transport dimensions: 1070/410/H240 mm -Weight: 265 kg Ljdpfszbrqpsx Abnoac

Condition: good (used), Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device -Container turning device: Welding turning device on rail chassis -Drive motor: 0.55 kW / adjustment motor 0.085 kW -Load capacity: 5000 kg -Roller spacing: 270 - 870 mm, rollers Ø 230 x 150 mm total width -Unwinding speed: 0.025 to 1.0 m/min Right/left rotation, Left rotation only continuous operation -Control unit: with hand control and foot pedal -Rail width: internal dimension 940 mm -Individual components: see photos -Transport dimensions: 1020/1020/H635 mm / 1020/500/H635 mm / 600/480/H955 mm Ljdpfx Abev Uwlnsnsac -Total weight: 844 kg

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus Lajdpfx Aeza Tgcebnoc -Manufacturer: Edalco, Thread cutting attachment with slip clutch -Type: Edalmatic EDM-R 1030 -Thread cutting sizes: M10 - M30 -Integrated reversing gearbox: with rapid return -Recording: MK5 -Tap chuck: Ø 22 mm -Dimensions: Ø 123 x 475 mm -Weight: 9 kg

Condition: like new (used), Year of construction: 2024, load capacity: 6,000 kg, workpiece weight (max.): 6,000 kg, Stierli- ROTATOR 600 / 6 to 360° turning device for fast and safe turning and rotating of beams, profiles and welding components. Use for welding, plastering, fast welding visual inspection, as assembly turning device etc.... Capacity: 6 tons Swing circle diameter: 600mm (e.g. beam HEB 600) Length of parts: freely selectable (stands are freely positionable by means of hand pallet truck) Adjustment of working height: Steplessly adjustable Laodpegqgb Uefx Abnjc The Stierli rotator was developed to turn heavy and large loads such as beams and welded constructions quickly and safely without a crane. This saves you a lot of working time and increases productivity. This welding positioner or welding manipulator works as a lifting turning device with reliable chains. The turning device is not only used for beam welding, but other cross sections can also be turned with it, such as the use as a pipe turning device. Loading is impressively simple with the overhead crane, or by means of forklift loading. The rotator can be brought into position very easily with the hand pallet truck, whereby the distance between the uprights of this welding device is freely selectable.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) Laodpfx Abszf E Hqjnec YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as Ledpfx Abszf E Dvsnjac - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Ledpfx Abscnw U Dsnsac Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg Lasdpfxscqy I Se Abnoc

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available - Ledpfxey A Tpqo Abneac

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Immediately available Lasdpfx Abjcdy I Ronsc Exceptional special price Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Ljdpfxocnw T Io Abnsac Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: used, Year of construction: 2011, functionality: fully functional, Equipment: type plate available, Conveyor system / Outfeed / Infeed Manufacturer: Budde Year of manufacture: 2011 Condition: Good (Used) Ledpozfnb Dsfx Abnoac Color: Blue - galvanized Overall length: approx. 2500 mm Short side (outfeed): approx. 780 mm Overall width incl. motor: approx. 1300 mm Belts: 18 pieces - approx. 40 mm wide Conveyor width: approx. 1000 mm Stock: 2 pieces Including SEW motor (1.1 KW) Price per piece Internal article number: 2026012705 Thanks to the excellent workmanship of the conveyor system, your material will be transported smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally disassembled and packed Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: excellent (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Ledpfx Aeh T Uwvjbnoac Included in the scope of supply: 1x Push-through safety device, used Material color: hot-dip galvanized Overall length: approx. 2,700 mm U-profile: 50 x 50 mm Agraffen dimensions: 335 x 50 mm (H x W) 4x Hex bolt: M10 x 35 mm 4x Lock nut: M10 8x Washers: M10 Additional information: System: SSI Schäfer For type designation: PR350/400 Designed for double rows of shelving Suitable for clear width: approx. 2,700 mm General information about the item: This item is offered for collection only. Any further transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet (without unloading)

Year of construction: 2018, condition: like new (used), PlateExakt 600 - Cliché mounting device/die-cutting cylinder Laedpfsl Ax Uwex Abnjc  Age: 1992  Mounting device  cliché mounting device which is exclusively designed to, the cliché or the die-cutting plate onto the impression or die-cutting cylinder safely, precisely and quickly cylinder. The device has two high-resolution USB cameras that can be moved linearly on a precision guide. precision guide. Synchronised via the centre and individually adjustable by means of a handwheel for different printing widths.  Max. diam.: 227”  Min. diam.: 60”  Width: 620mm

Condition: used, functionality: unexamined, Self-propelled oil skimming device for removing oil from still and flowing bodies of water. Diameter approximately 1,250 mm Lodpfxjzbt Icj Abneac Capacity up to 400 l/min.

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: presumably SRC-N 250-2R Year of manufacture: approx. 2000 Bowl diameter (bottom): 250 mm Bowl diameter (top): 380 mm Bowl internal height: approx. 90 mm Sorting track width: 30 mm Overall height (drive + bowl with sorting track): 405 mm Oscillation frequency: 100 Hz / 6000 min-1 Mains connection: 230 volts, 50 Hz - Control unit RNA, type ESG 90 for adjustable vibration speed - Vibratory bowl with rubber coating - The conveyor was used for feeding automotive fuses Space requirement Ø x H: 430 x 405 mm Weight: 38 kg Good condition A spiral conveyor always consists of two essential components. Laedpfx Aezbhuqsbnec 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: good (used), Min/max width : 20 - 220 mm Max length : endless Engine size : 4 Kw Configuration : 2 x steel infeed wheels + steel infeed chain. 1 x 1500 mm rollers Laedpfxjzdzk Aj Abnsc

Condition: used, Year of construction: 1998, liter capacity 250 l/min conveying height ca. 2 m Laedpfxezawgyj Abnec coolant capacity 500 l total power requirement 16 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 2,0 x 0,8 x 1,6 m Used mobil filter system for cleaning of coolant - take the dirty coolant out of the machine - clean the fluid with a band filter - use the 500 l tank - take cleaned cooland back to the tool machine - or use the high pressur gun to clean up the machine