Used Drive Controls for sale (58,259)

Condition: used, Vötsch   Type: VCS 7033   Vötsch climate chamber VCS 7033, water-cooled   Temperature range: -70°C to +180°C   Temperature change rate:   Heating: 7.5 K/min Cooling: 6.5 K/min Crodpfjzfy Rqsx Ak Aji   Humidity range: 10% to 98% RH   Temperature deviation (temporal): ± 0.5 K Temperature deviation (spatial): ± 1.5 K   Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x Depth 1565 mm x Height 1840 mm   Side feedthrough: 90 mm diameter   Approx. 330 L, weight: 600 kg   Voltage: 3/N/PE AC 400V ±6/-10% 50Hz Rated power: 9.5 kW, rated current: 17 A   Refrigerant: R-404A / R23   For your safety as a buyer, please note the following:   The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We would be happy to answer any further questions you may have over the phone.

Condition: used, Thermotron Type: SM-8-8200 Thermotron environmental test chamber, water-cooled Working area volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to +180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: Width 610 mm x Depth 610 mm x Height 610 mm External dimensions: Width 890 mm x Depth 1240 mm x Height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating time in minutes -65°C to 71°C: 17 Heating time in minutes -65°C to 180°C: 43 Heating time in minutes -40°C to 85°C: 16 Electrical requirements in full-load amps 230/3/60: 19 Electrical requirements in full-load amps 230/1/60: 25 Electrical requirements in full-load amps 220/1/50: 27 Cooling time in minutes 85°C to -40°C: 32 Cooling time in minutes 71°C to -65°C: 54 Cooling time in minutes 180°C to -65°C: 72 Compressor size: (2) -2 Hp Cedpfozd Snrjx Ak Aeri Operating voltage: 400V 16.7 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Stäubli Crodpjzdytvofx Ak Aji Type: RX60B LCR / F04/50R7E1/A/01 Type: CS8 RX60BLCR / F06/546XA1/C/01 Stäubli robot RX 60B with control unit Robot: Stäubli robot RX 60B LCR Lifting capacity (nominal load - kg): 2.5 kg Weight: 46 kg Control unit: Stäubli CS8 RX60B LCR 3X400V - 50/60 Hz - 3000VA Weight: 170 kg Handheld control unit: Stäubli SP1 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have by telephone.

Condition: used, Mitsubishi Crsdpjzdyt Njfx Ak Aoi Type: RV-3SDB-S15 Mitsubishi Industrial 6-Axis Articulated Arm Robot Compact and powerful, offering flexible automation and high reliability. The RV series provides a highly dynamic 6-axis articulated arm robot for maximum quality. Number of axes: 6 Maximum lifting capacity: 3.5 kg Reach radius: 642 mm Weight: 38 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Denso Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Codszd Ub Uepfx Ak Ajri Denso industrial robot with Denso controller Industries and applications The VS-068 series offers high speed and high performance in a compact, streamlined housing. In addition, numerous options are available, enabling operation in a wide variety of environments. Thanks to its high-speed performance, accuracy, and the diverse options available, the VS-068 can be used in almost all areas, including the automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, material maintenance, packaging, palletizing, and customized applications. Denso 6-axis robot VS-068 with Denso robot controller 410200-2611 The compact model impresses with outstanding performance and speed. Robot model VS068A4-AV6-C3N-ANNDN-NNNN Arm reach 710 mm Payload 7.0 kg Cycle time 0.31 sec Repeatability ±0.02 mm Weight: 49 kg Year of manufacture: 2016 Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have by phone.

Condition: used, Denso Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Denso industrial robot with Denso controller Industries and applications: The VS-068 series offers high speed and high performance in a compact, streamlined housing. In addition, numerous options are available, enabling operation in a wide variety of environments. Thanks to its high-speed performance, accuracy, and diverse available options, the VS-068 can be used in almost all areas, including the automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, material maintenance, packaging, palletizing, and custom applications. Denso 6-axis robot VS-068 with Denso robot controller 410200-2611 The compact model impresses with outstanding performance and speed. Robot model VS068A4-AV6-C3N-ANNDN-NNNN Arm reach: 710 mm Payload: 7.0 kg Cycle time: 0.31 sec Repeatability: ±0.02 mm Weight: 49 kg Year of manufacture: 2016 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Credpfx Akjzd Ucfj Aei We will be happy to answer any further questions you may have by telephone.

Condition: used, Kuka Crjdpjzd Uc Esfx Ak Aji Type: KR 60 L30-3 (Like new/unused) Kuka robot KR 60L30-3 Arm length: 1220 mm Number of axes: 6 Weight: 665 kg Axis 1 (A1) ± 150˚: 128˚/s Axis 2 (A2) +75˚/--105˚: 102˚/s Axis 3 (A3) +158˚/--120˚: 128˚/s Axis 4 (A4) ±350˚: 260˚/s Axis 5 (A5) ±119˚: 245˚/s Axis 6 (A6) ±350˚: 322˚/s With sealed software Rated payload: 30 kg Controller: KRC4 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Cedehp Rc Iepfx Ak Aeri Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: used, CTS Type: CS-70/350 Water-cooled Test chamber volume: 350 liters Test chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Temperature range: -70°C / +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Cedpfxsziyw Eo Ak Aeri Climate operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH Max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by phone.

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) Codszd Sdmepfx Ak Aori We will gladly answer any further questions you may have by phone.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 50 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser source manufacturer: MAX Photonics, laser power: 1,500 W, laser wavelength: 1,080 nm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 4 mm, table length: 600 mm, table width: 800 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, workpiece weight (max.): 50 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,500 kg, total length: 1,600 mm, total width: 2,000 mm, total height: 2,000 mm, door opening width: 600 mm, door opening height: 800 mm, height adjustment type: electric, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine with 1.5 kW fiber laser Exhibition machine / immediately available Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as is first-class service. Please also note our attractive leasing/hire-purchase offers. - Highest precision - Machine bed made of natural stone - Drives via YASKAWA linear motors (and, of course, linear guides) - Axes measured and adjusted with Renishaw measuring system (with protocol) - Pneumatic sheet metal clamping - Highly precise cutting machine - 1.5 kW laser source from MaxPhotonic - Extremely fine fiber (20 µm) - Travel range approx. 600 x 800 mm - Machine control in German - Incl. shuttle module - Very easy to operate. - Powerful laser chiller - Table support The following options are also available: - Raw material recognition and part nesting via CypVision camera system (optional) - Import of 3D files (.stp) and unfolding (optional) - Direct import of SolidWorks, SolidEdge, Inventor, etc. (optional) - Nesting, calculation, scrap management, etc. (optional) - ERP system combinable with all your other sheet metal processing machines (optional) Leasing or hire purchase is possible via our financing partner. Sales are exclusively to commercial businesses. Machine dimensions approx.: Width: 190 cm Height: 190 cm Depth: 180 cm Weight: approx. 2500 kg Crjdox I D Nxspfx Ak Aei

Condition: used, functionality: fully functional, Year of construction: 2024, empty load weight: 1,145 kg, total length: 832 mm, construction height: 784 mm, construction width: 631 mm, Traction battery Condition: Like new Technical condition: good Battery voltage: 48V Codpfo Ahlvnex Ak Asri Battery Ah: 775Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2024 Battery condition: 80 - 100% Description: Suitable for Linde E 16, E 20 P BR 335 and Linde E 16, 18, 20 H & PH BR 386. Includes Aquamatik, cables and connectors. 90% performance / overhauled 44/2026. Price includes the return of an old battery.

Condition: used, 0,75 Kw, adjustable Crode Ahlk Sspfx Ak Aei

Condition: ready for operation (used), Bosch SDB5.250.015-01.000, brushless, permanent magnet servo motor, serial number: 350000065, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Csdpfsi D E U Aox Ak Ajri

Condition: ready for operation (used), Bosch SD-B5.250.015-05.000, brushless, permanent magnet servo motor, serial number: 746000208. One connector is slightly damaged, see photo. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Crjdpfxei D E U Hs Ak Aji

Condition: ready for operation (used), Bosch SD-B5.250.015-14.000 Brushless Servo Motor SN, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Crodpei D Haysfx Ak Aei

Condition: new, Bosch SE-B5.700.020-10.000 Brushless servo motor, No. 1070915175 SN, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Crodpfxsi D Hd So Ak Aoi

Condition: ready for operation (used), Bosch UFV 160M / 4B-21S / 739 / 342776-1 servomotor, UVF 160M / 4B-21S / 739 / 342776-1 / 107-914867, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire for charges for packing and transport separately! Credpfx Aji D Hg Aek Aoi

Condition: ready for operation (used), Bosch UVF 112M / 4B-11S / 324/3375325-2 servo motor, serial number: 1070914200, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Crjdpfx Akji D Hhcj Aji

Condition: ready for operation (used), Allen Bradley 1326AS-B660E-21 servo motor Series A SN:H000869, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Codpotkgpqefx Ak Asri

Condition: new, Baumüller DSG 100-K servo motor, serial number: 20521958 + DG 66 ANC encoder + DGS 67 A5B encoder, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Csdji D E Dvepfx Ak Ajri

Condition: ready for operation (used), Beckhoff AM3024-0D20-0000 servo motor, serial number: 112570108, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Cedpfxji D E H Rs Ak Ajri

Condition: new, Bosch Rexroth SE-B2.030.060-10.037 Brushless Permanent Magnet Motor, serial number as shown in the photo, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Credpfsi D E Rxox Ak Aoi

Condition: ready for operation (used), Bosch SD-B3.000 Brushless, permanently excited synchronous servomotor, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please inquire separately for the price! Csdpfx Aei D E S Ssk Aori

Condition: ready for operation (used), ABB Robotics / Siemens 1FT3101-5AZ21-9 - Z-axis servo motor, serial number: FO10015731016, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Crsdpfx Aei D Ex Rek Aoi